Adjustable Feet（Page 3）

?* Information on days to ship and prices

• 

  Leveling Foot Jack

  NABEYA

  A leveling foot jack that can be used together with an anchor bolt. Convenient for adjusting the levels of machine tools.
  
  [Features]
  · Convenient for adjusting the levels of machine tools.
  · Can be used together with an anchor bolt.
  · Ductile casting is used for the base plate and the load resistance is sufficient.
  · The adjustment stroke is large and can be used where ground subsidence is extreme.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	61.02 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Leveling Blocks H Model

  NABEYA

  Ideal for the leveling of large machinery such as large milling machines, turning machines, and boring machines.
  
  [Features]
  · Features good precision.
  · Can be fixed with an anchor bolt.
  · Ideal for large machinery such as large milling machines, turning machines, boring machines, and planer machines.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	144.13 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Foot Jack FPJ Type

  NABEYA

  A semi-order type in which bolt diameter, bolt length, and pad diameter can be selected and combined.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	17.12 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Leveling Block AP Type

  NABEYA

  A leveling block that can also be used sideways or upside down.
  
  [Features]
  · Can also be used sideways or upside down.
  · An attachment can be mounted to the tapped hole on the top surface and for which point contacts can also be adjusted.
  · Can also be used for the centering of workpieces when cutting or to prevent chattering.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	142.88 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Leveling Block NU Type

  NABEYA

  [Features]
  · Compensates for sloped installation surfaces with a spherical receiver plate.
  · The spherical part has undergone precision processing with a contact ratio of 65% or higher.
  · The spherical receiver plate and top plate are made of ductile cast iron that is hard to damage.
  · Lifting amount (adjustment amount) is set to 10 mm, which is the highest in its class.
  · Employs a thrust needle bearing and special washer to enable operation with a load of 100kN.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	405.84 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Leveling Block, A Model

  NABEYA

  The standard leveling block.
  
  [Features]
  · Features good precision.
  · Machinery installation costs are reduced.
  · Features the best rigidity.
  · Installation is easy.
  · Ideal for the installation of milling machines, radial drilling machines, planer machines, surface plates, etc.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	126.49 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Anti-Vibration Wedge Mount (E Model)

  NABEYA

  [Features]
  · Suitable for machinery that does not require vibration-proofing.
  · A wedge mount featuring excellent slip preventing properties, a precise leveling mechanism, and a large adjustment stroke.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	203.34 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Foot Jack FJR Model (Rubber Type)

  NABEYA

  Since it includes rubber, floors are not damaged and slipping is prevented.
  
  [Features]
  · Since it includes rubber, floors are not damaged and slipping is prevented.
  · A hex nut is press-fitted to the bottom of the base to enable quick assembly with an impact wrench, etc.
  · The rubber has liquid resistance (gasoline, kerosene, acid, alkali) and can be used from -22°C to 100°C.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	9.29 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Leveling Element BNRSV (Stainless Steel)

  NABEYA

  A leveling element suitable for industrial machinery, such as used for the chemical and industrial machinery.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	100.56 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Adjuster for Anchor Fixing D-E II /D-E II-ST

  DAIWARASHI

  A standard item adjuster bolt for anchor fixing. Note: Please be advised that the model number in VONA has been changed from "D-E II" to "D-E2."
  
  [Features]
  · Similar to D-A, it is structured so that fixing of the receiver and bolt is performed by placing the bolt protrusion into the receiver and pressing a nut into it.
  · Can easily be fixed using an anchor bolt.
  · Please use an anchor bolt.
  · Please use a 12 mm anchor bolt.
  · Bolts shorter than 12 × 70 are not recommended for complete fixing due to safety concerns.
  · Note: The screw rotates and tilts somewhat.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.12 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Adjuster for Anchor Fixing, Screw Part Non-Shake D-J-E II

  DAIWARASHI

  An adjuster for anchor fixing in which the horizontal shaking of the screw shaft part is completely locked. Note: Please be advised that the model number in VONA has been changed from "D-J-E II" to "D-J-E2."
  
  [Features]
  · The structure is such that some space exists between the receiver and bolt.
  · This is the result of our efforts to enable bolts to move smoothly even if the floor surface is somewhat tilted.
  · It has been pointed out in the past that this may cause bolt looseness to occur when the upper portion of a conveyor vibrates, possibly resulting in significant machinery movement caused by shaking when the conveyor stops.
  · It is for this reason that we came up with the D-J type, which is suitable for use when the top portion of machinery such as a conveyor vibrates and moves slightly.
  · Even when a running machine is stopped, the bolts will not move and falling over will not occur.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	8.50 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Adjuster for Heavy Weights with Rubber D-C-R

  DAIWARASHI

  A rubber equipped type adjuster for medium loads
  
  [Features]
  · Receiver features a chloroprene rubber coating.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	9.53 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Adjuster for Heavy Weights (Long Screw Type) D-C-L / D-C-L/S

  DAIWARASHI

  A long screw adjuster with a wide adjustment range
  
  [Features]
  · Although the dimensions in the table are in increments of 50 mm, dimensions can be cut as desired upon request.
  A limited quantity of 500 mm total length products are available for M16 and M20.
  · D-C-LS has a luxurious feel since the surface of the receiver is grind-processed with a lathe.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	17.04 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Adjuster KC-270

  TAKIGEN

  Selections are possible from a variety of types based on the application.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.22 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Adjuster KC-30-KS

  TAKIGEN

  The bottom part is made of polyamide and features excellent chemical-resistance.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.83 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Stainless Steel Head Swinging Leveling Foot for Heavy Loads K-1277-B

  TAKIGEN

  Stainless steel with superior corrosion resistance.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	132.08 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Adjuster 111A, Wheel Diameter 32-38mm

  TAKIGEN(HAMMER CASTER)

  A glide in which an adjusting screw is inserted into a resin base. The product is used widely for furniture, etc., and is essential for the protection of floor surfaces and carpets.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.60 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  SUN Adjusting Nut

  SUN FASTENER

  [Features]
  · The adjusting nut is a nut that includes a leg part. Commercially-available bolts can be installed on machinery to easily mount an adjusting bolt.
  · Costs are drastically reduced since commercially-available bolts can be used.
  · Since the load of the product is also received by the bolt head part, it can also be used for heavy loads and heavy weights.
  · Since re-using (recycling) is easy, it contributes to the effective use of resources.
  · Installation of machinery can be performed by temporarily placing and then performing adjustments, enabling accurate positioning to be performed easily.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2.75 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Adjuster Pad (Standard Type)

  WOOJIN

  [Features]
  · Since reinforced polyamide is used, it features excellent chemical resistance and oil resistance.

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.30 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Level Adjuster (KA)

  IMAO CORPORATION

  [Features] The stainless steel type has excellent corrosion and water resistance. Approved load: 3 kN, 5 kN.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.39 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Level Adjuster (Anchor Type) (KAF)

  IMAO CORPORATION

  [Features] The stainless steel type has excellent corrosion resistance and water resistance. Approved load: 5 kN.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	8.29 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Adjuster Bolt (500 / 600 kg Type) (with Foot Stop Plate)

  TRUSCO NAKAYAMA

  · Features an anchor hole for fixing to the floor.
  · A hole is provided to the pedestal part and to enable it to be fixed to the floor with an anchor. Used to prevent equipment movement caused by intense vibrations.
  · Machine tools, vending machines, conveyors, work benches, control panels, and scientific instruments.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	10.85 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Foot adjustable PA6 80 / M12-152 - 55 / 85

  EUROFLEX

  PA 6/Galvanized Steel incl. fastening elements
  System width: 55/85

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	69.28 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Foot adjustable PA6 110 / M16-160 - 55 / 85 / 195

  EUROFLEX

  PA 6/Galvanized Steel incl. fastening elements
  System width: 55/85/195

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	42.63 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Foot adjustable Stainless Steel 80 / M16-180 - 55 / 85 / 195

  EUROFLEX

  Stainless Steel/NBR rubber
  System width: 55/85/195

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	64.02 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  6465 Precision wedge block

  AMF

  Precision wedge block Centring hole 12 mm. Case-hardened steel and fine-machined wedge surfaces. A spherical attachment no. 6440 is included with every precision whipstock. The product is available per 1 peace.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1,482.69 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Levelling Feet with Vibration Damping Element / GN 148 / with two-hole flange, with four-bolt flange

  GANTER

  Levelling feet GN 148 are designed for setting up heavy machinery and units with insulation against vibrations.
  This has a positive impact on the lifetime of machines and additionally reduces the noise pollution.
  The structure is such that horizontal forces are also absorbed.
  The design with tear-off lock (Type 2) protects the levelling feet from destruction caused by tear-off under excessive tension loads.
  The details relating to the load bearing capacity are non-binding recommended values and rule out any liability. They constitute no general warranty of quality and condition. The user must determine from case to case whether a product is suitable for the intended use.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	41.82 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  LV.FO - Levelling elements for ground mounting -Technopolymer base steel or stainless steel stem

  ELESA

  Levelling elements for fixing to the ground with base in black glass fibre reinforced polyamide-based technopolymer, threaded polished zinc-plated steel or AISI 304 stainless steel articulated stem with adjusting hexagon and option of having it without or with NBR rubber no-slip disk fixed to the base.
  The fixing is carried out by means of holes, closed by a diaphragm (removable with an awl) to prevent the deposit of unsanitary residues if not used.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.16 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  LV.F-SST - Levelling elements for ground mounting -Technopolymer base stainless steel stem

  ELESA

  Levelling elements for fixing to the ground with base in black glass fibre reinforced polyamide-based technopolymer, threaded AISI 304 stainless steel articulated stem with adjusting hexagon and option of having it without no-slip disk or with SBR rubber no-slip disk fixed to the base.
  The fixing is carried out by means of two 180° holes, closed by a diaphragm (removable with an awl) to prevent the deposit of unsanitary residues if not used.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	9.22 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Support Legs, protected against slipping

  HALDER

  The support legs are universally usable as adjustable legs.
  In this version with a rubber cap, sensitive support surfaces are protected, and slipping is prevented.
  The plate is screwed to the threaded pin and nut by a stainless steel fastening screw, and is also glued.

  Select to compare

  Configure now
  Starting from∗ ：	5.43 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Stainless Steel-Levelling feet rubber underlay, vulcanized

  GANTER

  [Specifications]
  ・Material: Stainless Steel
  ・Color: Black
  ・Thread d2: M6-M10
  ・Length l: 30-70
  ・Hardness: Hardness Shore A
  
  Leveling feet GN 439 / GN 439.5 are used for installing smaller machines, systems or devices.
  Thanks to the rubber underlay, they have a damping, noise-reducing effect and prevent surface damage. They are also designed such that the threaded spindle can absorb compressive forces. This is necessary because the retaining washer is not evenly supported during leveling.
  Thanks to the stable rivet connection between the threaded spindle and the retaining washer, the introduced forces can be reliably transmitted to the rubber underlay.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	5.66 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Foot plates, without central fastening hole

  GANTER

  [Specifications]
  ・Material: Steel
  ・Surface treatment: Powder coated
  ・Color: Black
  ・Type: without rubber underlay, with rubber underlay, with O-ring
  ・Foot diameter d1: 80-200
  ・Radius r: R20-R35
  
  Foot plates GN 36.1 are characterized by their solid construction and large variety. They are used especially on large and heavy systems and machines.
  The foot plates are ideal for use with customized adjustment or compensation stems that have the spherically shaped absorption radius "r" at the contact point. DIN screws or threaded studs with chamfer or pointed nose used as an alternative reduce the load capacity due to the lack of full-surface contact.
  Type B with rubber underlay prevents slipping to the side, protects delicate surfaces and dampens vibrations and tremors. Type C with O-ring provides a seal over the ground to prevent the build-up of dirt under the foot.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	13.10 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Foot plates, central fastening hole

  GANTER

  [Specifications]
  ・Material: Steel
  ・Surface treatment: Powder coated
  ・Color: Black
  ・Type: without rubber underlay, with rubber underlay, with O-ring
  ・Foot diameter d1: 80-200
  ・Radius r: R20-R35
  
  Foot plates GN 37.1 are characterized by their solid construction and large variety. They are used especially on large and heavy systems and machines. The through-hole allows the machine feet to be attached centrally to the ground, making them ideal for compressive and tensile loads.
  The foot plates are ideal for use with customized adjustment or compensation stems that have the spherically shaped absorption radius "r" at the contact point. DIN screws or threaded studs with chamfer or pointed nose used as an alternative reduce the load capacity due to the lack of full-surface contact.
  Type B with rubber underlay prevents slipping to the side, protects delicate surfaces and dampens vibrations and tremors. Type C with O-ring provides a seal over the ground to prevent the build-up of dirt under the foot.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	13.16 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Levelling feet in Hygienic DESIGN, Form A (K1303)

  KIPP

  · Specially for the hygiene sector
  
  · Application sectors: foodstuff industry, breweries, dairies, beverage and pharmaceutical industries
  
  · High surface quality
  
  · 3-A certified
  
  · Swivel angle 15°

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	71.15 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Levelling feet with hex base (K0676)

  KIPP

  · Compensates for uneven ground
  
  · Application sectors: machine and equipment construction, logistics and assembly
  
  · Hexagonal base
  
  · Various versions

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.36 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Swivel feet, Form A and B (K0395)

  KIPP

  · Components for assembling a swivel foot
  
  · Application sectors: machine and equipment construction, logistics and assembly
  
  · The anti-slip plate absorbs vibrations and prevents swivel foot slipping
  
  · Various materials

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.74 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Levelling feet in Hygienic DESIGN, Form A (27791-05)

  NORELEM

  · Specially for the hygiene sector
  
  · Application sectors: foodstuff industry, breweries, dairies, beverage and pharmaceutical industries
  
  · High surface quality
  
  · 3-A certified
  
  · Swivel angle 15°

  Select to compare

  Configure now
  Starting from∗ ：	87.96 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Levelling feet steel or stainless steel Form A (27790)

  NORELEM

  · Components for assembling a swivel foot
  
  · Application sectors: machine and equipment construction, logistics and assembly
  
  · Rubber pad dampen structural sound
  
  · Suitable nuts included
  
  · Material: Foot plate and threaded spindle, steel or stainless steel

  Select to compare

  Configure now
  Starting from∗ ：	10.21 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Swivel feet, Form C and D (07144)

  NORELEM

  · Components for assembling a swivel foot
  
  · Application sectors: machine and equipment construction, logistics and assembly
  
  · Various materials

  Select to compare

  Configure now
  Starting from∗ ：	10.03 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Levelling Pads 2259, Type A

  MAEDLER

  Material Type A: Ball bearing: free cutting steel, induction hardened, black oxide finish.
  Pad: steel, heat-treated, black oxide finish.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	12.49 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Precision Levelling Adjusters - Precision Adjusters MN 686.6, Standard

  MAEDLER

  Material:
  Standard version: 42CrMo4V, No. 1.7225, zinc-plated and blue passivated.
  • For parallel surfaces.
  • Low overall height with short adjustment travel.
  • With lock nut.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	43.77 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Precision Levelling Adjusters - Precision Adjusters MN 686.3, Standard

  MAEDLER

  Material:
  Standard version: 42CrMo4V, No. 1.7225, zinc-plated and blue passivated.
  • For parallel surfaces.
  • Low overall height with short adjustment travel.
  • Without lock nut.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	30.29 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Precision Levelling Adjusters - Ball Shims MN 686.5, Standard

  MAEDLER

  Material:
  Standard Version: 42CrMo4V, Nr. 1.7225, zinc-plated and blue passivated.
  For an angle of inclination (alpha) of up to 4°. If the angle of inclination (alpha) exceeds > 1° out of parallel, the use of an additional MN 686.5 is recommended to assure a stable support of the bolt head.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	15.12 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Precision Levelling Adjusters - Ball Head Precision Adjusters MN 686.4, Standard

  MAEDLER

  Material:
  Standard version: 42CrMo4V, No. 1.7225, zinc-plated and blue passivated.
  • For non-parallel surfaces up to 4º slope.
  • Low overall height with short adjustment travel.
  • Without lock nut.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	41.53 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Levelling Pads 2259, with External Thread, Type AG

  MAEDLER

  Material Type AG: Ball with threated bolt: free cutting steel,induction hardened, black oxide finish.
  Pad: steel, heat-treated, black oxide finish.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	23.50 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

Loading...