Keyless Bushing (Fastening Fittings)
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
- Recommendation
Tapered Clamping Bush 1008 with Inch Drill
CONCAR
[Specifications]
・Type: 1008
・Body Material: Cast Iron
・Standard: British Standard BS 46 Part 1
Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.Configure nowStarting from∗ ： 9.45 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
- Recommendation
Tapered Clamping Bush 1008 with Metric Drill
CONCAR
[Specifications]
・Type: 1008
・Body Material: Cast Iron
・Standard: DIN 6885 Part 1
Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.Configure nowStarting from∗ ： 4.72 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Keyless Bushings / Standard
MISUMI
- Volume Discount
- Order quantities extended (D-JIT)
- Stock
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 35.76 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Compact and self-centering locking device KBS61
KBK
· Large clamping range
· High centering capability and good concentricity properties
· Compact design
· Available starting from 5mm shaft diameter
· Torque range: 6 - 1900Nm- 2D / 3D CAD data available
Configure nowStarting from∗ ： 10.35 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Keyless Bushings / Compact
MISUMI
[Features] It has a centring function and is suitable for a smaller hub.- Volume Discount
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 31.74 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Keyless Bushings / Easy Mounting (Nut)
MISUMI
[Features] It can be easily installed by simply tightening 1 nut.- Volume Discount
- Order quantities extended (D-JIT)
- Stock
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 40.66 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Mecha Lock MA, Standard Type
ISEL
[Features]
· 34 models that have shaft diameters standardized from ø5 to ø85.
· Centering function suppresses outer circumference and terminal surface run-out.
· Loose design of slope angle degrees produces a self-locking effect.
· Hub internal diameter can be used with pass-through machining.
· Wide range of hub options with thin walls and low surface pressure- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 38.74 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Short locking device for higher tolerances KBS40
KBK
· Costs-effective
· Very short
· Large span
· Non self-centering
· Torque range: 255 - 68000Nm- 2D / 3D CAD data available
Configure nowStarting from∗ ： 11.77 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Self-centering locking device for small hubs KBS80
KBK
· For high concentricity and perpendicularity of the components
· No axial displacement during assembly
· Self-centering
· Torque range: 12 – 17500Nm- 2D / 3D CAD data available
Configure nowStarting from∗ ： 12.08 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Mecha-Lock MN Series, Nut Type
ISEL
Easy-to-tighten nut type key-less bushing (fastening fitting).
[Features]
· Tightening the nut shortens the tightening time.
· Easiest assembly among mechanical lock series.
· Centering can be done by simply tightening both the sides.
· Also contributes to reduction of hub outer diameter.
[Applications]
· Ideal for mounting on power transmission devices (pulleys, etc.) that especially have a folding mechanism, such as machine tools and transfer devices.
· Ideal for installations with thinner hub thickness and low torque.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 46.53 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
KanaLock (Cost-Effective Product) Model KPL300
KATAYAMA CHAIN
[Features]
· For model KPL300, mounting space has been extremely reduced in a radial direction, embedding of up to 4 KanaLocks can be selected.
· This facilitates great torque transmission.
· Boss hole and shaft hole fitting is up to H8/h8- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 5.43 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Locking Assemblies 7005
RINGFEDER
Clamping set for high loads and suitable for alternating moments. Ideal for use in belt drums and flywheels.- 3D CAD data available
Configure nowMin. Shipping Days ： 5 Days -
Configure now
Starting from∗ ： 9.33 € Min. Shipping Days ： 12 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Keyless Bushings / Thin
MISUMI
- Volume Discount
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 28.46 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Keyless Bushings / Straight
MISUMI
- Volume Discount
- Order quantities extended (D-JIT)
- Stock
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 35.14 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Self-centering locking device KBS13
KBK
· For connections in the smallest places
· Very short design
· Self-centering
· Torque range: 310 - 46980Nm- 2D / 3D CAD data available
Configure nowStarting from∗ ： 9.90 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Locking Elements 8006
RINGFEDER
Ideally adaptable clamping element made of stainless steel for large transmission forces in a small space. Absolutely backlash-free, wear-free and maintenance-free. Also suitable for coarser tolerances.- 3D CAD data available
Configure nowMin. Shipping Days ： 5 Days -
Locking Assemblies 7015
RINGFEDER
The self-centering precision clamping set for the transmission of maximum torques or axial forces with special demands on the concentricity of the parts to be clamped, as well as for applications subject to bending moments.Large transmittable circumferential forces - the long, shallow angles of the cones allow maximum torques or axial forces to be transmitted with a RfN 7015.0 clamping set. During assembly, the clamping set, shaft and hub remain in position relative to each other, thus ensuring additional safety in relation to 3-part construction types. Shaft and hub are only pressure loaded.- 3D CAD data available
Configure nowMin. Shipping Days ： 5 Days -
Rigid Shaft Coupling
KBK
· Very cost-effective
· For medium and low torques
· No axial displacement during assembly
· Self-centering
· Torque range: 158 - 4300Nm- 2D / 3D CAD data available
Configure nowStarting from∗ ： 10.99 € Min. Shipping Days ： 12 Days *Unit price with basic configuration
-
Locking Assemblies Stainless Steel 7012 SST
RINGFEDER
Clamping set with small design made of stainless steel. Particularly suitable for tight installation conditions and coarser tolerance fluctuations with high power reserves. High-strength clamping screws allow a higher performance range.- 3D CAD data available
Configure nowMin. Shipping Days ： 5 Days -
Locking Assemblies Stainless Steel 7061 SST
RINGFEDER
Self-centering 2-piece Locking Assemblies for medium torques. During mounting, minor axial displacement of the hub occurs in opposite direction of the screw head. Due to the small number of screws, cost savings during mounting are ensured. For disassembly only few release screws are required. High-strength clamping screws allow a higher performance range.- 3D CAD data available
Configure nowMin. Shipping Days ： 5 Days -
Configure now
Starting from∗ ： 56.33 € Min. Shipping Days ： 1 Day *Unit price with basic configuration
-
Shrink Disc
KBK
· For hollow shaft connections
· Applicable for high bending moments
· Short overall length
· Good concentricity properties
· Self-centering and self-releasing
· Torque range: 40 - 327000Nm- 2D / 3D CAD data available
Configure nowStarting from∗ ： 14.41 € Min. Shipping Days ： 12 Days *Unit price with basic configuration
-
Keyless Bushing A.P.LOCK SAPL-A Series
SUNGIL
[Features]
· Self-centering function: Prevents minute Off-centering.
· Difference between internal diameter (d) and outer diameter (D) is slight, and can also be installed to small hubs with light pressure on its surface.
· Internal diameters 4.5ø to 40ø standardized.
· Has simple structure for easy assembly.
· Choose from stainless steel (vacuum environments) or electroless nickel plated products (corrosion proof) to suit the use environment- 2D CAD data available
Configure nowStarting from∗ ： 19.79 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Locking Element
KBK
· Very cost-effective
· For medium and low torques
· Requests a mounting flange provided by the customer
· Compact installation dimensions
· Non self-centering
· Torque range: 2,4 - 31500Nm- 2D / 3D CAD data available
Configure nowStarting from∗ ： 2.83 € Min. Shipping Days ： 12 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
POSI LOCK D
MIKI PULLEY
Shaft and mounting parts have a large allowable dimensions tolerance, and can be easily aligned and positioned. Medium load and lightweight type.
[Features]
· Tighten the clamping bolt to move the outer ring in the shaft direction.
· At this time, the wedge action on the tapered face with the inner ring creates a force that pushes the shaft and the hub inner face, which forces the shaft and the hub to be fully engaged.
· The PSL-D is designed for medium loading, with a small surface pressure and reduced installation diameter and weight.
· Short in shaft direction, does not take up more space than necessary.
· PSL-D-C is a simple rust proofing specification that involves applying electroless nickel plating to the main body.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 73.77 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Self-centering locking Device with flange KBS16
KBK
· For connections in the smallest places
· Very short design
· No axial displacement during assembly
· Self-centering
· Torque range: 260 - 36100Nm- 2D / 3D CAD data available
Configure nowStarting from∗ ： 9.90 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Locking Assemblies 7012
RINGFEDER
Clamping set with a narrow design. Particularly suitable for tight installation conditions and coarser tolerance fluctuations with high power reserves.- 3D CAD data available
Configure nowMin. Shipping Days ： 5 Days -
Locking Assemblies 7515
RINGFEDER
The self-centering precision Locking Assembly for transmission of torques, axial forces and special optimised for the transmission of bending moments, with special requirements to the true running of the clamped pieces.- 3D CAD data available
Configure nowMin. Shipping Days ： 5 Days -
Configure now
Starting from∗ ： 51.69 € Min. Shipping Days ： 1 Day *Unit price with basic configuration
-
Locking Assemblies COM-A, Stainless
MAEDLER
Material: Stainless steel 1.4401 (AISI 316).
• For fixing a hub (e.g. V-belt pulley or similar) on a shaft.
• For low torques.
• Not self-centering.
• Self-releasing at dismounting.
• No axial movement during mounting.- Volume Discount
Configure nowStarting from∗ ： 50.09 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies 7070
RINGFEDER
Clamping set made of steel with central nut. Ideal for small components, tight installation space. The construction by the central clamping nut makes this clamping set very easy to install and has excellent concentricity and concentricity.- 3D CAD data available
Configure nowMin. Shipping Days ： 5 Days -
Locking Elements Slotted 8006 SST
RINGFEDER
Ideally adaptable clamping element made of stainless steel for large transmission forces in a small space. Absolutely backlash-free, wear-free and maintenance-free. Also suitable for coarser tolerances.- 3D CAD data available
Configure nowMin. Shipping Days ： 3 Days -
Locking Assemblies BAR
MAEDLER
Material: Steel.
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For medium torques.
• Very good distribution of pressure.
• Very good self-centering.
• Self-releasing at dismounting.
• Also suitable for large hub and shaft tolerances.
• Slight axial offset possible during assembly.- Volume Discount
Configure nowStarting from∗ ： 24.10 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies COM-R
MAEDLER
Material: Steel.
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For lower to medium torques.
• Not self-centering.
• Loose clamping rings. For use with customer's pressure sleeves and customer´s screws.
• Up to 4 clamping sets can be used in line.
• Versatile usage, for customized solutions.- Volume Discount
Configure nowStarting from∗ ： 5.72 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies SIG
MAEDLER
Material: Stainless steel 1.4301 (AISI 304).
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For lower torques.
• Minimal space requirement.
• Self-centering.
• Axial movement during mounting.
• The connection can be disassembled with a puller.
Required tolerances: Shaft: h8.
Bore of the part to be clamped: H8.
Surface roughness Rz max. 12.5 μm.- Volume Discount
Configure nowStarting from∗ ： 28.82 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Mecha-Lock MKT, Rust-Proof General Purpose Type, Electroless Nickel Plating Specifications
ISEL
No drag when connecting for easy removal. Electroless nickel plated product.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 106.31 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
KanaLock (Cost-Effective Product) Model KPL200
KATAYAMA CHAIN
KPL200 is a dedicated KanaLock for shafts and bosses that require substantial transmission torque. Easy mounting. Applicable shaft diameter 19 mm to 70 mm.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 19.79 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Tapered Clamping Bush 1610 with Metric Drill
CONCAR
[Specifications]
・Type: 1610
・Body Material: Cast Iron
・Standard: DIN 6885 Part 1
Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.Configure nowStarting from∗ ： 8.26 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Locking Assemblies 7080
RINGFEDER
Clamping set made of steel with central nut. Ideal for small components, tight installation space. The construction by the central clamping nut makes this clamping set very easy to install and has excellent concentricity and concentricity. The clamping set is additionally nickel-plated.- 3D CAD data available
Configure nowMin. Shipping Days ： 5 Days -
Locking Elements Slitted 8006
RINGFEDER
Ideally adaptable clamping element made of stainless steel for large transmission forces in a small space. Absolutely backlash-free, wear-free and maintenance-free. Also suitable for coarser tolerances.- 3D CAD data available
Configure nowMin. Shipping Days ： 5 Days -
Locking Assemblies COM-CB2
MAEDLER
Material: Steel.
• For fixing a hub (e.g. spur toothed gear or similar) on a shaft.
• For medium high torques.
• Self-centering.
• Self-locking.
• No axial movement during mounting.- Volume Discount
Configure nowStarting from∗ ： 12.26 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Keyless Bushings / Straight for High Torque
MISUMI
- Volume Discount
- Order quantities extended (D-JIT)
- Stock
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 105.79 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Mecha-Lock MKN, Rust-Proof Nut Tightening Type, Electroless Nickel Plating Specifications
ISEL
Nut tightening shortens tightening time. Electroless nickel plated product.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 90.75 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Mechanical Lock MR Thin Type
ISEL
Using thin-type keyless bushing (fastening fitting), the outer diameter can be reduced.
[Features]
· Ideal for when a thin-wall hub design is desired.
· The outer diameter of the hub can be reduced by making the wall thinner.
· Can be used for overall short length hubs.
· Installation time is reduced by reducing the number of bolts.
· With short surface pressure section, the product is ideal for reducing the width of the hub.
[Applications]
· Ideal for mounting on power transmission devices (pulleys, etc.) that especially have a folding mechanism, such as machine tools and transfer devices.
· Can be used for overall short length hubs.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 46.50 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days |
| Specifications |
| Type |
| Centering |
| Body Material |
| Shaft Bore Dia. d(Ø) |
| Allowable Torque Range(N•m) |
| Surface Treatment |
| Hub Dia. D1(Ø) |
| Tightening Structure |
| Tightening Method |
| Allowable Torque(N•m) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | CONCAR | CONCAR | MISUMI | KBK | MISUMI | MISUMI | ISEL | KBK | KBK | ISEL | KATAYAMA CHAIN | RINGFEDER | KBK | MISUMI | MISUMI | KBK | RINGFEDER | RINGFEDER | KBK | RINGFEDER | RINGFEDER | HALDER | KBK | SUNGIL | KBK | MIKI PULLEY | KBK | RINGFEDER | RINGFEDER | HALDER | MAEDLER | RINGFEDER | RINGFEDER | MAEDLER | MAEDLER | MAEDLER | ISEL | KATAYAMA CHAIN | CONCAR | RINGFEDER | RINGFEDER | MAEDLER | MISUMI | ISEL | ISEL |
| Product Series | Tapered Shaft Hubs, without lock nut, stainless steel mm / mm | Mecha-Lock MKT, Rust-Proof General Purpose Type, Electroless Nickel Plating Specifications | Mecha-Lock MKN, Rust-Proof Nut Tightening Type, Electroless Nickel Plating Specifications | ||||||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||
| Starting from∗ | 9.45 € *Unit price with basic configuration | 4.72 € *Unit price with basic configuration | 35.76 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 10.35 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 | 31.74 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 40.66 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 38.74 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 11.77 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 | 12.08 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 | 46.53 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 5.43 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | - | 9.33 € *Unit price with basic configuration | 28.46 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 35.14 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 9.90 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 | - | - | 10.99 € *Unit price with basic configuration | - | - | 56.33 € *Unit price with basic configuration | 14.41 € *Unit price with basic configuration | 19.79 € *Unit price with basic configuration | 2.83 € *Unit price with basic configuration | 73.77 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 9.90 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 | - | - | 51.69 € *Unit price with basic configuration | 50.09 € *Unit price with basic configuration Volume Discount | - | - | 24.10 € *Unit price with basic configuration Volume Discount | 5.72 € *Unit price with basic configuration Volume Discount | 28.82 € *Unit price with basic configuration Volume Discount | 106.31 € *Unit price with basic configuration | 19.79 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 8.26 € *Unit price with basic configuration | - | - | 12.26 € *Unit price with basic configuration Volume Discount | 105.79 € *Unit price with basic configuration Volume Discount | 90.75 € *Unit price with basic configuration | 46.50 € *Unit price with basic configuration |
| Min. Shipping Days | 3 Days | 3 Days | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | 5 Days | 12 Days | Same day | Same day | Same day | 5 Days | 5 Days | 12 Days | 5 Days | 5 Days | 1 Day | 12 Days | 5 Days | 12 Days | Same day | Same day | 5 Days | 5 Days | 1 Day | 4 Days | 5 Days | 3 Days | 4 Days | 4 Days | 4 Days | 5 Days | Same day | 3 Days | 5 Days | 5 Days | 4 Days | Same day | 5 Days | 5 Days |
| Specifications |
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||
| Type | - | - | Flanged | Straight | Thin Wall | Nut Tightening | Flanged | Straight | Flanged | Nut Tightening | Sleeve | - | - | Direct Mounting | Straight | Straight | - | - | - | - | - | - | - | Flanged | - | Straight | Flanged | - | - | - | - | - | - | - | - | - | Straight | Straight | - | - | - | - | Straight | Nut Tightening | Thin Wall |
| Centering | - | - | Provided | - | Provided | Not Provided | Provided | - | - | Provided | Not Provided | - | - | Not Provided | Not Provided | - | - | - | - | - | - | - | - | Provided | - | - | - | - | - | - | Not Provided | - | - | Provided | Not Provided | Provided | Not Provided | Not Provided | - | - | - | Provided | Not Provided | Provided | Provided |
| Body Material | Grey Iron | Grey Iron | Steel / Stainless Steel | Steel | Steel / Stainless Steel | Steel | Steel | Steel | Steel | Steel | Steel | - | - | Steel | Steel | Steel | - | - | - | - | - | - | - | Steel | - | Steel | Steel | - | - | - | - | - | - | - | - | - | Steel | Steel | Grey Iron | - | - | - | Steel | Steel | Steel |
| Shaft Bore Dia. d(Ø) | - | - | 5 ～ 70 | 5 ～ 50 | 5 ～ 50 | 8 ～ 35 | 5 ～ 70 | 19 ～ 220 | 6 ～ 120 | 8 ～ 35 | 10 ～ 80 | - | - | 5 ～ 30 | 20 ～ 65 | 18 ～ 180 | - | - | - | - | - | - | - | 5 ～ 50 | - | 2 ～ 50 | 18 ～ 180 | - | - | - | - | - | - | - | - | - | 20 ～ 50 | 19 ～ 70 | - | - | - | - | 30 ～ 65 | 8 ～ 35 | 6 ～ 50 |
| Allowable Torque Range(N•m) | - | - | 2.0 to 20.0 ～ 3000.1 to 10000.0 | - | 2.0 to 20.0 ～ 1000.1 to 3000.0 | 20.1 to 50.0 ～ 300.1 to 500.0 | 2.0 to 20.0 ～ 3000.1 to 10000.0 | - | - | 20.1 to 50.0 ～ 300.1 to 500.0 | 2.0 to 20.0 ～ 1000.1 to 3000.0 | - | - | 2.0 to 20.0 ～ 100.1 to 150.0 | 200.1 to 300.0 ～ 1000.1 to 3000.0 | - | - | - | - | - | - | - | - | 2.0 to 20.0 ～ 1000.1 to 3000.0 | - | 2.0 to 20.0 ～ 1000.1 to 3000.0 | - | - | - | - | - | - | - | - | - | - | 200.1 to 300.0 ～ 1000.1 to 3000.0 | 200.1 to 300.0 ～ 3000.1 to 10000.0 | - | - | - | - | 1000.1 to 3000.0 ～ 3000.1 to 10000.0 | 20.1 to 50.0 ～ 300.1 to 500.0 | 2.0 to 20.0 ～ 1000.1 to 3000.0 |
| Surface Treatment | - | - | Not Provided / Black Oxide / Electroless Nickel Plating | - | Not Provided / Electroless Nickel Plating | Not Provided / Black Oxide / Electroless Nickel Plating | Not Provided | - | - | Not Provided | Not Provided | - | - | Not Provided | Not Provided / Electroless Nickel Plating | - | - | - | - | - | - | - | - | Not Provided | - | Not Provided / Electroless Nickel Plating | - | - | - | - | - | - | - | - | - | - | Electroless Nickel Plating | Not Provided | - | - | - | - | Not Provided | Electroless Nickel Plating | Not Provided |
| Hub Dia. D1(Ø) | - | - | 16 ～ 97 | 16 ～ 80 | 12 ～ 65 | 14 ～ 48 | 16 ～ 97 | 47 ～ 285 | 14 ～ 155 | 14 ～ 48 | - | - | - | 8 ～ 35 | 47 ～ 95 | 47 ～ 235 | - | - | - | - | - | - | - | 16 ～ 72 | - | 16 ～ 80 | 47 ～ 235 | - | - | - | - | - | - | - | - | - | 47 ～ 80 | 47 ～ 110 | - | - | - | - | 55 ～ 95 | 14 ～ 48 | 12 ～ 65 |
| Tightening Structure | - | - | Single Cone Type | Double Cone Type | Single Cone Type | Tapered Sleeve Type | Single Cone Type | Double Cone Type | Single Cone Type | Tapered Sleeve Type | Tapered Sleeve Type | - | - | Single Cone Type | Double Cone Type | Single Cone Type | - | - | - | - | - | - | - | Single Cone Type | - | Single Cone Type | Single Cone Type | - | - | - | - | - | - | - | - | - | Single Cone Type | Double Cone Type | - | - | - | - | Double Cone Type | Tapered Sleeve Type | Tapered Sleeve Type |
| Tightening Method | - | - | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | - | - | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | - | - | - | - | - | - | - | Mechanical Type (Wedge Type) | - | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | - | - | - | - | - | - | - | - | - | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | - | - | - | - | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) |
| Allowable Torque(N•m) | - | - | 2.8 ～ 3400 | - | 3 ～ 2120 | 21 ～ 461 | 7 ～ 3400 | - | - | 29.4 ～ 461 | 6.9 ～ 1860 | - | - | 4.2 ～ 149 | 300 ～ 2990 | - | - | - | - | - | - | - | - | 7 ～ 1500 | - | 6 ～ 1760 | - | - | - | - | - | - | - | - | - | - | 294 ～ 1775 | 270 ～ 5100 | - | - | - | - | 1110 ～ 6400 | 29.4 ～ 461 | 11 ～ 2120 |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Type
-
Centering
- Provided
- Not Provided
-
Body Material
-
Shaft Bore Dia. d(Ø)
-
Allowable Torque Range(N•m)
-
Surface Treatment
- Not Provided
- Black Oxide
- Electroless Nickel Plating
- Clear Anodize
-
Hub Dia. D1(Ø)
-
Tightening Structure
-
Tightening Method
-
Allowable Torque(N•m)
Brand
CAD data type
-
- 2D
- 3D
Examples how you can use these components
Categories related to Keyless Bushing (Fastening Fittings)
Fizetési mód
Átutalás
Előre fizetés
Igény szerinti gyártás
Tanúsítványok
Copyright © MISUMI Corporation Minden jog fenntartva.