TRUSCO NAKAYAMA Screw-Hole-Related Tools
Search by sub-category
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Broken Tap Extractor Set【5-7 Pieces Per Package】
TRUSCO NAKAYAMA
[Characteristics]
When a tap breaks during work, this tool can be used to easily remove taps that have broken with damaging the screw threads.
Because a special steel string is used for the claw, it features a high twisting strength and does not break easily. It also easily removes taps that have become deeply sunk in or broken.
Even if the claw becomes damaged, it can be used many times until it becomes short. Also offers easy replacement of spare nails, making it extremely economic.
Especially for use with hand taps.
[Use]
For removal of bent hand taps.Starting from∗ ： 158.24 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Extractor (Spiral Model)
TRUSCO NAKAYAMA
[Characteristics]
For removing broken bolts and pipes.
Can remove bolts that have broken inside of screw holes without damaging the hole.
Can easily remove small screws when the plus or minus grooves on the screw head become stripped.
Drilling pilot holes allows for the easy removal of hexagonal bolts with crushed head corners, or bolts that have been broken off half way.
[Application]
For removing broken bolt and pipe.- Volume Discount
Starting from∗ ： 4.25 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Spiral Tap (for metal screws)
TRUSCO NAKAYAMA
[Characteristics]
Spiral tap for regular steel.
[Use]
For pilot hole machining.
Work materials: general steel, low to medium carbon steel, alloy steel.Starting from∗ ： 10.01 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
T shaped tap holder
TRUSCO NAKAYAMA
[Characteristics]
Features an easy-to-use T-shaped handle.
[Application]
For tap threading operations.- Volume Discount
Starting from∗ ： 16.09 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Folded Tap Removal Tool, 4 Claws (For 4 Grooves) Switching Claw【4 Pieces Per Package】
TRUSCO NAKAYAMA
Easily remove a broken tap without damaging its threads. Pawls made of special steel wire improves torsion strength and removes a broken tap that is stuck hard. Even if the pawl breaks, the remover itself is usable repeatedly until it gets too short. Also offers easy replacement of spare nails, making it extremely economic. For hand taps only.- Volume Discount
Starting from∗ ： 17.38 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Starting from∗ ： 54.09 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Adjustable Round Die For Tapered Pipe Thread (PT Screw)
TRUSCO NAKAYAMA
[Features]
· Dimensional adjustments can be made with the adjustment screw provided.
· Can also be used to modify screw threads.
[Applications]
· Work materials: low carbon steel.
· For male threading.- Volume Discount
Starting from∗ ： 82.65 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Hand Tap (For Metric Screws / SKS)
TRUSCO NAKAYAMA
[Features]
· For creating and refining (making clean) screw holes.
· For creating and modifying coarse screw threads.
[Applications]
· Work materials: iron, light metals.
· For creating and modifying coarse screw threads.
[Materials]
· Low alloy steel (SKS)Starting from∗ ： 75.96 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Starting from∗ ： 461.87 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Point Tap (for metric screws)
TRUSCO NAKAYAMA
[Features]
High-speed tapping is possible.
Homogenization treated.
[Use]
For through hole machining.
Work materials: general steel, low to cedium carbon steel, alloy steel.Starting from∗ ： 9.74 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Hand Tap Set (for metric screws / HSS-E)
TRUSCO NAKAYAMA
[Characteristics]
Can be used for both through holes and blind holes.
High-speed steel (HSS-E) tap set.
Work materials: general steel, low to medium carbon steel, alloy steel.- Volume Discount
Starting from∗ ： 27.26 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Hand Tap (for metric screws / SKS)
TRUSCO NAKAYAMA
[Characteristics]
For creating and brushing up (making clean) screw holes.
For coarse screw thread repair and machining.
[Application]
Work Material: Iron, Light Metal.
Coarse screw thread repairing and machining.- Volume Discount
Starting from∗ ： 3.56 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
T-Shaped Ratchet Tap Holder
TRUSCO NAKAYAMA
[Characteristics]
Ratchet-type with excellent workability.
By switching to clockwise rotation, it is possible to perform threading effectively.
[Application]
For tap threading operations.- Volume Discount
Starting from∗ ： 55.74 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Spare Hook for T Type Ratchet Tap Holder
TRUSCO NAKAYAMA
If the tap is not strongly tightened with pliers, it can damage nails.Starting from∗ ： 18.78 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Tap handle (made of iron)
TRUSCO NAKAYAMA
[Characteristics]
Straight-handle type for hand tapping / hand reaming.
Because the body is plastic, it is stronger than zinc die-cast, and is sturdy.
[Application]
For tapping.Starting from∗ ： 97.25 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Round Die for Metric Screw
TRUSCO NAKAYAMA
[Features]
· Dimensional adjustments can be made with the adjustment screw provided.
· Can also be used to modify screw threads.
· For round dies.
[Applications]
· Work materials: iron, light metals.
· For male threading.
· Correction of coarse screw threads.- Volume Discount
Starting from∗ ： 29.86 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Die Handle
TRUSCO NAKAYAMA
[Characteristics]
Straight-handle type for round dies.
[Application]
For holding dies.- Volume Discount
Starting from∗ ： 12.83 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Hexagonal Re-Threading Die (coarse)
TRUSCO NAKAYAMA
[Characteristics]
For bolt and screw clean out.
Can be operated with adjustable spanner.
Replacement product for round dies used when repairing screw threads.
[Use]
Coarse screw thread repairing.Starting from∗ ： 65.41 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Hexagonal Re-Threading Die For Gas Pipe (PS Screw)
TRUSCO NAKAYAMA
[Characteristics]
For bolt and screw clean out.
Used for screw thread repair.
Can be operated with adjustable spanner.
Replacement product for round dies used when repairing screw threads.
[Use]
- Fixing PS (Straight) threads.Starting from∗ ： 81.43 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Extractor (Square Model)
TRUSCO NAKAYAMA
[Characteristics]
For removing broken bolts and pipes.
The angle shape can be used with both left and right bolts and screws.
Type that can be used with right or left-handed screws.
When the plus or minus grooves on screw heads become stripped.
To remove hexagonal bolts with crushed head corners, or bolts that have been broken off half way.
For removing broken bolts and pipes.Starting from∗ ： 6.44 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Trusco, Extractor Set (Square), EXS-18【5-7 Pieces Per Package】
TRUSCO NAKAYAMA
[Characteristics]
Can remove bolts that have broken inside of screw holes without damaging the hole.
[Application]
For removing broken bolt and pipe.Starting from∗ ： 42.06 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 129.96 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Tap For Tapered Pipe Thread (PT Screw)
TRUSCO NAKAYAMA
[Features]
· Tap for tapered pipe thread.
[Applications]
· Work materials: cast iron, light metals.Starting from∗ ： 30.66 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 191.91 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Screw Types |
| Screw size (Nominal) |
| Pitch (P), Number of Threading(mm) |
| Chamfer threads (Lcf) |
| Tool Material Type |
| work material |
| Tap Type |
| Hole type |
| Coating Y/N |
| Coating Type |
| Overall Length (L)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA |
| Product Series | Folded Tap Removal Tool, 4 Claws (For 4 Grooves) Switching Claw【4 Pieces Per Package】 | Hexagonal Re-Threading Die Set (Metric Coarse Screw)【10 Pieces Per Package】 | Trusco, Extractor Set (Square), EXS-18【5-7 Pieces Per Package】 | |||||||||||||||||||||
| Starting from∗ | 158.24 € *Unit price with basic configuration | 4.25 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 | 10.01 € *Unit price with basic configuration | 16.09 € *Unit price with basic configuration | 17.38 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 | 54.09 € *Unit price with basic configuration Volume Discount | 82.65 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 75.96 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 | 461.87 € *Unit price with basic configuration | 9.74 € *Unit price with basic configuration | 27.26 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 3.56 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 | 55.74 € *Unit price with basic configuration | 18.78 € *Unit price with basic configuration | 97.25 € *Unit price with basic configuration | 29.86 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 12.83 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 | 65.41 € *Unit price with basic configuration | 81.43 € *Unit price with basic configuration | 6.44 € *Unit price with basic configuration | 42.06 € *Unit price with basic configuration | 129.96 € *Unit price with basic configuration | 30.66 € *Unit price with basic configuration | 191.91 € *Unit price with basic configuration |
| Min. Shipping Days ： | 6 Days | Same day | 6 Days | 6 Days | Same day | Same day | Same day | Same day | 6 Days | 6 Days | Same day | Same day | 6 Days | 6 Days | 6 Days | Same day | Same day | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days |
| Screw Types | - | - | Meter | - | - | - | Taper for Pipe | Meter | - | Meter | Meter | Meter | - | - | - | Meter | - | - | - | - | - | - | Taper for Pipe | - |
| Screw size (Nominal) | - | - | M4 ～ M5 | M4～6 | - | - | 1/2 ～ 3/4 | M22 | - | M5 ～ M6 | M5 ～ M8 | M2 ～ M3 | M3～10 | - | M10～25 | M2 ～ M14 | - | M20 | R1/2 | - | - | - | 1/4 | - |
| Pitch (P), Number of Threading(mm) | - | - | 0.7 ～ 0.8 | - | - | - | - | 1.5 | - | 0.8 ～ 1 | 0.8 ～ 1.25 | 0.4 ～ 0.5 | - | - | - | 0.4 ～ 2 | - | 2.5 | 14 | - | - | - | - | - |
| Chamfer threads (Lcf) | - | - | 2.5P | - | - | - | - | - | - | 5P | - | 1.5P ～ 9P | - | - | - | - | - | - | - | - | - | - | 1.5-Shaped | - |
| Tool Material Type | - | - | Vanadium High-Speed Steel | - | - | - | Alloy HSS | JIS-SKS | - | Vanadium High-Speed Steel | High-speed steel | Alloy HSS | - | - | - | Alloy HSS | - | Alloy HSS | Alloy HSS | - | - | - | Alloy HSS | - |
| work material | - | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] | - | - | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | - | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Cast Iron (FC)[○] / Aluminum Alloy Casting (AC, ADC)[○] | - | - | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Cast Iron (FC)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Zinc Alloy Casting (ZDC)[○] | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | - | - | - | Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | - |
| Tap Type | Modification/removal Tool | Modification/removal Tool | Spiral Tap | Tap wrench | Modification/removal Tool | Modification/removal Tool | Die | Hand Tap | Die | Point tap | Hand Tap | Hand Tap | Tap wrench | Tap wrench | Tap wrench | Die | Die | Die | Die | Modification/removal Tool | Modification/removal Tool | - | Tap for pipes | Tap wrench |
| Hole type | - | - | For blind hole | - | - | - | - | - | - | For through hole | For through hole / For blind hole | - | - | - | - | - | - | - | - | - | - | - | For through hole | - |
| Coating Y/N | - | - | - | - | - | - | - | N/A | - | - | N/A | N/A | - | - | - | - | - | - | - | - | - | - | N/A | - |
| Coating Type | - | - | - | - | - | - | - | - | - | - | Non-Coated | Non-Coated | - | - | - | - | - | - | - | - | - | - | - | - |
| Overall Length (L)(mm) | - | 50 ～ 76 | 52 ～ 60 | 61 | - | - | - | 115 | - | 60 ～ 62 | 60 ～ 70 | 40 ～ 46 | 85 | - | 460 | - | 190 ～ 310 | - | - | 60 | - | - | 62 | - |
Loading...
Filter by:
Stock
-
- Stock Items Included
Narrow search by specifying spec./dim.
-
Screw Types
- Meter
- Unified
- Whitworth
- Sewing Machine
- Taper for Pipe
- Parallel for Pipes
- Trapezoid
- Miniature
- Other
-
Screw size (Nominal)
- CTG-54
- CTG-42
- CTG-36
- CTG-28
- CTG-22
- CTG-16
- No0UN
- NO.0-80UNF
- No.0-80UNF
- No.10
- S0.1
- NO.1-72UNF
- No.1-72UNF
- NO.1-64UNC
- No.1-64UNC
- NO.10-32UNF
- No.10-32UNF
- NO.10-24UNC
- No.10-24UNC
- No.12
- No.12-32UNEF
- NO.12-28UNF
- No.12-28UNF
- NO.12-24UNC
- No.12-24UNC
- No.2
- S0.2
- NO.2-64UNF
- No.2-64UNF
- NO.2-56UNC
- No.2-56UNC
- No.3
- S0.3
- NO.3-56UNF
- No.3-56UNF
- NO.3-48UNC
- No.3-48UNC
- No.4
- S0.4
- NO.4-48UNF
- No.4-48UNF
- NO.4-40UNC
- No.4-40UNC
- No.5
- S0.5
- NO.5-44UNF
- No.5-44UNF
- NO.5-40UNC
- No.5-40UNC
- No.6
- S0.6
- NO.6-40UNF
- No.6-40UNF
- No.6-32UNC
- S0.7
- No.8
- S0.8
- NO.8-36UNF
- No.8-36UNF
- NO.8-32UNC
- No.8-32UNC
- S0.9
- 1"
- 1UN
- 1UNS
- G1
- G 1"
- M1
- NPS1
- NPT1
- NPTF1
- No1UN
- PF1
- PF 1
- PT 1
- R1
- Rp1
- S1
- UNC 1
- UNC 1"
- UNF 1"
- W1
- 1´-20UNEF
- 1´-14UNS
- 1'-12UNF
- 1´-12UNF
- 1´-11
- 1′-11
- 1-8UNC
- 1'-8UNC
- 1´-8UNC
- G1"-3"
- 1"1/2UN
- 1"1/2
- G1"1/2
- NPS1"1/2
- NPT1"1/2
- R1"1/2
- Rp1"1/2
- W1"1/2
- 1´1/2-11
- 1′1/2-11
- 1 1/2-8UN
- 1"1/4UN
- 1"1/4
- G1"1/4
- NPS1"1/4
- NPT1"1/4
- R1"1/4
- Rp1"1/4
- W1"1/4
- 1´1/4-11
- 1′1/4-11
- 1 1/4-8UN
- 1"1/8UN
- G1"1/8
- R1"1/8
- W1"1/8
- 1 1/8-8UN
- 1´ 1/8-7UNC
- 1"1/16UN
- 1/2
- 1/2UN
- G1/2
- G 1/2
- NPS1/2
- NPT1/2
- NPTF1/2
- PF 1/2
- PT 1/2
- R1/2
- Rc1/2
- Rp1/2
- UNC 1/2
- UNF 1/2
- UNJF 1/2
- W1/2
- 1/2-28UNEF
- 1/2-20UNF
- 1/2-14
- 1/2-13UNC
- G1/2 5/8
- 1/2W12
- 1 3/4
- 1"3/4UN
- G1"3/4
- R1"3/4
- Rp1"3/4
- W1"3/4
- 1′3/4-11
- 1 3/4-8UN
- 1 3/8
- 1"3/8UN
- G1"3/8
- R1"3/8
- W1"3/8
- 1 3/8-8UN
- 1/4
- 1/4UN
- G1/4
- G 1/4
- NPS1/4
- NPT1/4
- NPTF1/4
- PF1/4
- PF 1/4
- PS 1/4
- PT 1/4
- R1/4
- Rc1/4
- Rp1/4
- SM1/4
- UNC 1/4
- UNF 1/4
- UNJF 1/4
- W1/4
- 1/4-32UNEF
- 1/4-28UNF
- 1/4-20UNC
- 1/4-19
- 1/4W20
- W1"5/8
- 1 5/8-8UN
- W1"7/8
- 1 7/8-8UN
- 1'W8
- 1/8
- G1/8
- G 1/8
- NPS1/8
- NPT1/8
- NPTF1/8
- PF1/8
- PF 1/8
- PT 1/8
- R1/8
- Rc1/8
- Rp1/8
- SM1/8
- W1/8
- 1/8-28
- 1/8SM40
- 1/8SM44
- 1/16
- G1/16
- NPS1/16
- NPT1/16
- R1/16
- Rp1/16
- 1/16-28
- 1/16SM80
- M1.1
- G 1.1/2
- G 1.1/4
- G 1.1/8
- M1.2
- S1.2
- M1.4
- S1.4
- M1.6
- M1.7
- M1.8
- 2"
- 2UN
- G2
- M2
- M2.0
- NPS2
- NPT2
- No2UN
- R2
- Rp2
- UNC 2
- UNF 2
- W2
- 2´-11
- 2′-11
- 2-8UN
- G2"1/2
- R2"1/2
- Rp2"1/2
- 2′1/2-11
- W2"1/4
- M2.2
- M2.3
- M2.5
- M2.6
- 3M
- EGM 3
- G3
- M3
- M3.0
- No3UN
- R3
- Rp3
- STI M3
- UNC 3
- UNF 3
- 3′-11
- G3"1/2
- R3"1/2
- Rp3"1/2
- 3/4
- 3/4UN
- G3/4
- G 3/4
- NPS3/4
- NPT3/4
- NPTF3/4
- PF 3/4
- R3/4
- Rp3/4
- UNC 3/4
- UNF 3/4
- W3/4
- 3/4-20UNEF
- 3/4-16UNF
- 3/4-14
- 3/4-10UNC
- 3/4W10
- 3/8
- 3/8UN
- G3/8
- G 3/8
- NPS3/8
- NPT3/8
- NPTF3/8
- PF3/8
- PF 3/8
- PT 3/8
- R3/8
- Rc3/8
- Rp3/8
- UNC 3/8
- UNF 3/8
- UNJF 3/8
- W3/8
- 3/8-32UNEF
- 3/8-24UNF
- 3/8-19
- 3/8-16UNC
- 3/8W16
- M3 - M10
- M3～10
- M3 - M12
- SM3/16
- W3/16
- 3/16SM24
- 3/16W24
- 3/16SM28
- 3/16SM32
- 3/16SM40
- M3 - M18
- SM3/32
- 3/32SM56
- 3/32SM100
- 3.5
- M3.5
- 4
- 4M
- EGM 4
- G4
- M4
- M4.0
- MF4
- No4UN
- R4
- Rp4
- STI M4
- UNC 4
- UNF 4
- №4-40UNC
- M4～6
- M4.5
- 5M
- EGM 5
- M5
- M5.0
- MF5
- No5UN
- STI M5
- UNC 5
- №5-40UNC
- 5/8
- 5/8UN
- G5/8
- G 5/8
- NPS5/8
- R5/8
- UNC 5/8
- UNF 5/8
- W5/8
- 5/8-24UNEF
- 5/8-18UNF
- 5/8-11UNC
- G5/8 3/4
- 5/8W11
- M5 - M12
- M5～13
- 5/16
- 5/16UN
- UNC 5/16
- UNF 5/16
- UNJF 5/16
- W5/16
- 5/16-32UNEF
- 5/16-24UNF
- 5/16-18UNC
- 5/16W18
- W5/32
- 5/64SM64
- 5.5M
- M5.5
- 6
- EGM 6
- M6
- M6.0
- MF6
- No6UN
- STI M6
- UNC 6
- UNF 6
- UNJC 6
- No6-40UNF
- №6-32UNC
- M7
- MF7
- PG7
- 7 execution M3 - M12
- 7/8
- 7/8UN
- G7/8
- G 7/8
- NPS7/8
- R7/8
- UNC 7/8
- UNF 7/8
- W7/8
- 7/8-20UNEF
- 7/8-14UNF
- 7/8-9UNC
- 7/8W9
- 7/16
- 7/16UN
- UNC 7/16
- UNF 7/16
- UNJF 7/16
- W7/16
- 7/16-28UNEF
- 7/16-20UNF
- 7/16-14UNC
- 7/16W14
- SM7/32
- 7.5
- M7.5
- EGM 8
- M8
- MF8
- No8UN
- STI M8
- Tr8
- UNC 8
- UNF 8
- UNJC 8
- №8-32UNC
- 9
- M9
- PG9
- 9/16
- 9/16UN
- UNC 9/16
- UNF 9/16
- 9/16-18UNF
- 9/16-12UNC
- 9/16W12
- SM9/32
- SM9/64
- 9/64SM40
- M9.5
- EGM 10
- M10
- MF10
- No10UN
- STI M10
- Tr10
- Tr 10
- UNC10
- UNC 10
- UNF 10
- UNJF 10
- №10-32UNF
- №10-24UNC
- M10～25
- M11
- PG11
- SM11/32
- SM11/64
- 11/64SM40
- EGM 12
- M12
- MF12
- Mf12
- No12UN
- STI M12
- Tr12
- Tr 12
- UNC 12
- UNF 12
- M12 x 1.5
- M13
- PG13.5
- M14
- MF14
- Tr 14
- M15
- SM15/64
- 15/64SM28
- M16
- MF16
- Mf16
- PG16
- Tr16
- Tr 16
- M16 x 1.5
- M17
- M18
- MF18
- Tr18
- Tr 18
- M19
- M20
- MF20
- Mf20
- Tr 20
- M20 x 1.5
- M21
- PG21
- M22
- M22X
- MF22
- Tr 22
- M23
- M24
- M24X
- MF24
- Tr 24
- M25
- M25X
- MF25
- Mf25
- Tr 25
- M25 x 1.5
- M26
- MF26
- Tr 26
- M27
- MF27
- M28
- MF28
- Tr 28
- PG29
- M30
- MF30
- Tr 30
- M32
- Mf32
- M33
- M34
- M35
- M36
- PG36
- M37
- M38
- M39
- M40
- M42
- PG42
- M44
- M45
- M46
- M48
- M50
- M52
- M56
- M64
- 1015
- 1020N100M
- 1020N150M
- 06510X28R
- 10154
- 12204
- 12254N100M
- 12254N150M
- 12254N200M
- 16304N100M
- 16304N150M
- 16304N200M
- 16304N250M
- 20305
- 20505N100M
- 20505N150M
- 20505N200M
- 20505N300M
- 20505N350M
- 25506N100M
- 25506N150M
- 25506N200M
- 25506N300M
- 25506N350M
- 32506
- 32506N150M
- 32506N200M
- 32506N300M
- 035083N075M
- 035083N080M
- 040123N100M
- 060163N050M
- 060163N100M
- 060163N125M
- 065103X28G
- 075203N125M
- 075203N150M
- 080153X19G
- 080153X19R
- 080203N050M
- 080203N100M
- 090244N125M
- 090244N175M
- 100254N050M
- 100254N100M
- 100254N150M
- 100254N200M
- 120204X14G
- 120204X14R
- 120304N100M
- 120304N150M
- 120304N200M
- 160264X11G
- 160264X11R
- 160404N150M
- 160404N200M
- 160404N250M
- 200305X11G
- 200305X11R
- 200505N150M
- 200505N200M
- 200505N300M
-
Pitch (P), Number of Threading(mm)
-
Chamfer threads (Lcf)
-
Tool Material Type
- High-speed steel
- Cobalt HSS
- Powder high-speed steel
- Carbide
- Alloy HSS
- Vanadium High-Speed Steel
- JIS-SKS
-
work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless Steel (JIS-SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
-
Tap Type
-
Hole type
-
Coating Y/N
-
Coating Type
-
Overall Length (L)(mm)
Narrow search by specifying Brand
-
- MISUMI (16)
- OSG (378)
- YAMAWA MFG (98)
- CARMEX (35)
- ESCO (25)
- SKC (25)
- TRUSCO NAKAYAMA (24)
- REX TOOLS (20)
- NACHI(FUJIKOSHI) (15)
- ISHIHASHI (13)
- SANDVIK (13)
- GEDORE (7)
- GUHRING (5)
- WERA (5)
- HAZET (4)
- NOGAJAPAN (4)
- TANOI MFG (4)
- RENNSTEIG (3)
- BAHCO (2)
- EIKOSHA (2)
- H & H (2)
- NS TOOL (2)
- RUKO (2)
- WIHA (2)
- FEIN (2)
- BERNSTEIN AG (1)
- ENGINEER (1)
- KANETEC (1)
- LIGHTSEIKI (1)
- MITSUTOMO (1)
- NEW STRONG (1)
- STAHLWILLE (1)
- WALTER PROTOTYP (1)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Screw-Hole-Related Tools
Fizetési mód
Átutalás
Előre fizetés
Igény szerinti gyártás
Tanúsítványok
Copyright © MISUMI Corporation Minden jog fenntartva.