OSG Cutters / Indexable End Mills
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Phoenix Series Face Milling Cutter, Octagon Type, Bore Type, Screw Lock Type
OSG
An octagonal and hole type face milling cutter. Economical due to the use of double-sided octagonal inserts, giving a total of 16 corners.Starting from∗ ： 522.40 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 224.79 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Phoenix Series Shoulder Cutting Cutters PSE Threaded Type
OSG
Threaded type for shoulder cutters. Special holders support different machining depths.Starting from∗ ： 268.40 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Phoenix Series Shoulder Cutting Cutters Bore Type
OSG
By using this high precision insert, excellent bottom surface roughness is achieved. The bottom notch effect splits chips in two during ramp and spiral milling, which suppresses chip piercing and entanglement and enables smooth milling.Starting from∗ ： 335.83 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 429.70 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Phoenix Series Round Cutters Threaded Type
OSG
Screw Type Cutter For side surfaces, grooving, digging and form cutting.Starting from∗ ： 331.10 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Phoenix Series Round Cutters Straight Shank Type
OSG
The wide reversible plate pocket improves cutting performance, and the use of a body retraction mould that supports 3D machining enables highly efficient mould machining.Starting from∗ ： 248.60 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Small Diameter Cutter Series Cyclone Cutter Straight Shank
OSG
High rake end mill with low cutting resistance. Large depth of cut and high feed rate achieve high efficiency machining.Starting from∗ ： 792.83 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
F3000 Series Positive Mill, Neo Shell Type
OSG
Shell type that uses 3-dimensional breaker inserts of good sharpness. For use with face mill arbor.Starting from∗ ： 751.17 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
F3000 Series Positive, Neo Straight Shank
OSG
End mill type that uses 3-dimensional breaker inserts of good sharpness. Addition to multi-blade 20mm shank that uses small type of inserts good for application in small machines.Starting from∗ ： 164.58 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
F3000 Series Positive, Neo Straight Shank
OSG
End mill type that uses 3-dimensional breaker inserts of good sharpness. Insert application is wide.Starting from∗ ： 496.42 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Phoenix Series Shoulder Cutting Cutters Straight Shank Type
OSG
By using this high-precision insert, excellent bottom surface roughness is achieved. Due to the bottom notch effect, chips are divided into 2 parts during ramp and spiral milling, which suppresses chip piercing and entanglement and enables smooth milling.Starting from∗ ： 260.30 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Phoenix Series High Feed Radius Cutters Straight Shank Type
OSG
Indexable high feed radius cutter, threaded. Special holders support different machining depths.Starting from∗ ： 231.83 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Phoenix Series High Feed Radius Cutters Threaded Type
OSG
PHC screw type radius cutter. Machining Application: Flat Surfaces, Side Surfaces, Grooving, Digging and Form CuttingStarting from∗ ： 404.50 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Phoenix Series High Feed Radius Cutters Bore Type
OSG
PHC bore type radius cutter. Machining Application: Flat Surfaces, Side Surfaces, Grooving, Digging and Form CuttingStarting from∗ ： 318.50 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Phoenix Series High Efficiency Radius Cutters with Shaft
OSG
A high feed radius cutter series with variable negative chamfer insert that prevents chipping and reduces cutting force.Starting from∗ ： 291.42 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Phoenix Series Face Milling Cutter, Octagon Type, Bore Type, Wedge Stop Type
OSG
PHOENIX Series, wedge type
[Materials]General steel / Tempered steel / Stainless steel / Cast iron.Starting from∗ ： 1,029.17 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 463.70 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Phoenix Series Ball End Mills for Finishing
OSG
For finishing. Does not gouge flat areas and is equally good on all working surfaces.Starting from∗ ： 389.30 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 203.20 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Phoenix Series Radius End Mills for Finishing
OSG
Radius cutter with thread for finishing. Special holders support different machining depths.- Volume Discount
Starting from∗ ： 170.90 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 1,019.80 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Shank Holders Dedicated to Phoenix Series Threaded Type
OSG
A special holder for threaded shank. By changing the head, it can be used for different machining operations.Starting from∗ ： 186.70 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 1,500.00 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 254.50 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 671.67 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 281.50 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
PAS BORE, 45° face milling cutter
OSG
45° face milling cutter - Double sided 8 corners inserts - Bore typeStarting from∗ ： 731.10 € Min. Shipping Days ： 2 Days *Unit price with basic configuration
-
PSE WS / PSE SS, 90° shoulder cutter
OSG
90° shoulder cutter - 2 corners inserts with bottom notch - Cylindrical typeStarting from∗ ： 291.20 € Min. Shipping Days ： 2 Days *Unit price with basic configuration
-
Starting from∗ ： 687.40 € Min. Shipping Days ： 2 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Machining Application |
| blade diameter D(mm) |
| work material |
| Mounting Method |
| Finish category |
| Overall length (L)(mm) |
| Shank diameter (d)(mm) |
| Number of flutes(sheet) |
| Compatible Tip Material |
| Maximum Cutting Depth (Ad)(mm) |
| Underneck length (ℓ1)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG |
| Product Series | Phoenix Series Face Milling Cutter, Octagon Type, Bore Type, Screw Lock Type | Phoenix Face Milling Cutter, 4-Corner Shoulder Mill Cutting Bore Type | Phoenix Series Face Milling Cutter, Octagon Type, Bore Type, Wedge Stop Type | Tips for Phoenix Series Threaded Type Ball End Mills for Finishing | Phoenix Series 4-Corner Shoulder Cutting Cutters Straight Shank Type | |||||||||||||||||||||||||
| Starting from∗ | 522.40 € *Unit price with basic configuration | 224.79 € *Unit price with basic configuration | 268.40 € *Unit price with basic configuration | 335.83 € *Unit price with basic configuration | 429.70 € *Unit price with basic configuration | 331.10 € *Unit price with basic configuration | 248.60 € *Unit price with basic configuration | 792.83 € *Unit price with basic configuration | 751.17 € *Unit price with basic configuration | 164.58 € *Unit price with basic configuration | 496.42 € *Unit price with basic configuration | 260.30 € *Unit price with basic configuration | 231.83 € *Unit price with basic configuration | 404.50 € *Unit price with basic configuration | 318.50 € *Unit price with basic configuration | 291.42 € *Unit price with basic configuration | 1,029.17 € *Unit price with basic configuration | 463.70 € *Unit price with basic configuration | 389.30 € *Unit price with basic configuration | 203.20 € *Unit price with basic configuration Volume Discount | 170.90 € *Unit price with basic configuration Volume Discount | 1,019.80 € *Unit price with basic configuration | 186.70 € *Unit price with basic configuration | 1,500.00 € *Unit price with basic configuration | 254.50 € *Unit price with basic configuration | 671.67 € *Unit price with basic configuration | 281.50 € *Unit price with basic configuration | 731.10 € *Unit price with basic configuration | 291.20 € *Unit price with basic configuration | 687.40 € *Unit price with basic configuration |
| Min. Shipping Days ： | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 2 Days | 2 Days | 2 Days |
| Machining Application | Plane | Plane / Groove / Chamfer | Plane / Side / Groove | Plane / Side / Groove / Vertical | Plane / Side / Groove | Side / Groove / Vertical | Plane / Side / Groove / Vertical | Plane / Chamfer | Side / Groove | Side / Groove | Side / Groove | Plane / Side / Groove | Plane / Side / Groove / Vertical | Plane / Side / Groove / Vertical | Plane / Side / Groove / Vertical | Plane / Side / Groove / Vertical | Plane | Plane | - | - | Plane / Side | Plane / Side / Groove | - | Plane / Side / Groove | Plane / Side / Groove | Plane / Groove | - | - | - | - |
| blade diameter D(mm) | 50 ～ 125 | 18.9 ～ 123.7 | 16 ～ 40 | - | 50 ～ 80 | 10 ～ 30 | 10 ～ 88 | 63 | 50 | 20 | 32 ～ 63 | 16 ～ 63 | 13.2 ～ 46.4 | 13.2 ～ 28.2 | 23.4 ～ 83.4 | 20 ～ 105 | 100 ～ 200 | 50 ～ 125 | 8 ～ 30 | 10 ～ 30 | 8 ～ 32 | 25 ～ 50 | - | 50 ～ 80 | 25 ～ 40 | 80 ～ 160 | 8 ～ 30 | - | - | - |
| work material | General Steel / Quenched and tempered steel / Stainless Steel / Cast Iron | General Steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium | General Steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium | - | - | General Steel / Quenched and tempered steel / High Hardness Steel / Stainless Steel / Cast Iron / Aluminum / Titanium | General Steel / Quenched and tempered steel / High Hardness Steel / Stainless Steel / Cast Iron / Aluminum / Titanium | General Steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum | General Steel / Quenched and tempered steel / High Hardness Steel / Stainless Steel / Cast Iron / Aluminum / Titanium | General Steel / Quenched and tempered steel / High Hardness Steel / Stainless Steel / Cast Iron / Aluminum / Titanium | General Steel / Quenched and tempered steel / High Hardness Steel / Stainless Steel / Cast Iron / Aluminum / Titanium | General Steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium | General Steel / Quenched and tempered steel / High Hardness Steel / Stainless Steel / Cast Iron / Aluminum / Titanium | General Steel / Quenched and tempered steel / High Hardness Steel / Stainless Steel / Cast Iron / Titanium | General Steel / Quenched and tempered steel / High Hardness Steel / Stainless Steel / Cast Iron / Titanium | General Steel / High Hardness Steel / Cast Iron | General Steel / Quenched and tempered steel / Stainless Steel / Cast Iron | General Steel / Quenched and tempered steel / High Hardness Steel / Stainless Steel / Cast Iron | - | - | - | - | - | - | - | - | - | - | - | - |
| Mounting Method | Arbor | With handle / Arbor | Centering Plug | - | Arbor | Centering Plug | With handle / Arbor | With handle | Arbor | With handle | With handle | With handle | With handle | Centering Plug | Arbor | With handle / Centering Plug | Arbor | Arbor | With handle | Centering Plug | With handle / Centering Plug | With handle | Centering Plug | Arbor | With handle | Arbor | With handle | - | - | - |
| Finish category | - | Rough to Finish Processing | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Overall length (L)(mm) | 40 ～ 63 | 40$40.7 ～ 98.7 | 27 ～ 40 | - | 40 ～ 50 | 33 ～ 40 | 40 ～ 250 | 120 | 40 | 100 | 150 ～ 200 | 90 ～ 190 | 140 ～ 300 | 35 ～ 40 | 40 ～ 63 | 63 ～ 306 | 50 ～ 63 | 45 ～ 63 | 100 ～ 290 | 26 ～ 43 | 26 ～ 300 | 125 ～ 144 | 95 ～ 290 | 74 ～ 88 | 120 ～ 140 | - | 120 ～ 170 | - | - | - |
| Shank diameter (d)(mm) | - | 20 ～ 25 | - | - | - | - | 20 ～ 42 | 32 | - | 20 | 32 | 16 ～ 32 | 25 ～ 42 | - | - | MT5-M16 ～ CN50.8 | - | - | 8 ～ 32 | - | 8 ～ 32 | 25 ～ 42 | 10 ～ 32 | - | 25 ～ 32 | - | 8 ～ 32 | - | - | - |
| Number of flutes(sheet) | 5 ～ 12 | 3 ～ 12 | 2 ～ 6 | 3 ～ 11 | 3 ～ 9 | 2 ～ 4 | 2 ～ 10 | 5 | 5 | 3 | 3 ～ 4 | 2 ～ 6 | 2 ～ 5 | 2 ～ 4 | 3 ～ 8 | 2 ～ 6 | 14 ～ 25 | 4 ～ 8 | 2 | 2 | 2 | 2 ～ 4 | - | 3 ～ 4 | 3 ～ 5 | 10 ～ 20 | 2 | - | - | - |
| Compatible Tip Material | Carbide Coat | Carbide Coat | Carbide Coat / No Carbide Coat | - | - | Carbide Coat / No Carbide Coat | Carbide Coat / No Carbide Coat | Carbide Coat / No Carbide Coat / Cermet | Carbide Coat / No Carbide Coat | Carbide Coat / No Carbide Coat | Carbide Coat / No Carbide Coat | Carbide Coat / No Carbide Coat | Carbide Coat | Carbide Coat | Carbide Coat | Carbide Coat | Carbide Coat | Carbide Coat | - | - | - | - | - | - | - | - | - | - | - | - |
| Maximum Cutting Depth (Ad)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Underneck length (ℓ1)(mm) | - | 25.7 ～ 40.7 | - | - | - | - | 50 ～ 120 | 45 | - | 30 | 45 | 25 ～ 90 | 40 ～ 180 | - | - | 50 ～ 170 | - | - | 20 ～ 165 | - | 20 ～ 175 | 50 ～ 64 | 4 ～ 190 | - | 35 ～ 50 | - | 36 ～ 90 | - | - | - |
Loading...
Filter by:
Narrow search by specifying spec./dim.
-
Machining Application
-
blade diameter D(mm)
- 4.29 - 12.70
- 4.52 - 9.53
- 4.60 - 13.00
- 5
- 5.00 - 10.00
- 5.00 - 12.00
- 5.69 - 12.70
- 6
- 7.00 - 12.00
- 7.42 - 12.70
- 7.49 - 15.88
- 7.60 - 16.00
- 7.87 - 15.88
- 8
- 8.00 - 15.00
- 8.00 - 16.00
- 8.60 - 20.00
- 8.86 - 15.88
- 9.00 - 16.00
- 9.04 - 19.05
- 9.525
- 9.7
- 10
- 10.00 - 20.00
- 10.59 - 19.05
- 11.05 - 19.05
- 11.3
- 11.60 - 20.00
- 11.7
- 12
- 12.00 / 16.20
- 12.00 - 20.00
- 12.00 / 20.10
- 12.00 / 22.90
- 12.00 / 23.40
- 12.00 - 24.00
- 12.7
- 13
- 13.2
- 13.21 / 17.42
- 13.21 / 21.29
- 13.21 / 24.61
- 13.21 / 27.20
- 13.4
- 13.50 - 25.00
- 13.7
- 14
- 14.00 - 25.40
- 15
- 15.00 - 25.00
- 15.4
- 15.7
- 15.875
- 15.88
- 16
- 16.00 - 32.00
- 16.2
- 16.60 - 25.00
- 16.94 - 31.75
- 16.99 - 25.40
- 17
- 17.00 - 25.00
- 17.20 - 32.00
- 17.6
- 18
- 18.2
- 18.4
- 18.9
- 19
- 19.05
- 19.56 / 30.96
- 19.7
- 20
- 20
- 20.00 - 32.00
- 20.2
- 20.50 / 31.90
- 20.50 - 32.00
- 20.50 / 36.90
- 20.9
- 21
- 21.20 - 36.00
- 22
- 22.00 - 32.00
- 23.2
- 23.29 - 38.10
- 23.4
- 23.8
- 24
- 24.00 - 32.00
- 25
- 25
- 25.20 - 40.00
- 25.4
- 25.50 / 29.70
- 25.50 / 33.60
- 25.50 / 36.90
- 25.50 / 39.50
- 25.91 / 30.10
- 25.91 / 33.99
- 25.91 / 37.31
- 25.91 / 39.90
- 26
- 26.8
- 27.20 - 42.00
- 28
- 28.2
- 29.40 - 44.00
- 30
- 30/32
- 30.7
- 31.75
- 32
- 32
- 33
- 33.4
- 34
- 35
- 35.20 - 50.00
- 35.9
- 35.99 - 50.80
- 36
- 36.7
- 37.20 - 52.00
- 37.40 - 52.00
- 38
- 38.1
- 38.2
- 39
- 39.40 - 54.00
- 39.5
- 40
- 40
- 40.50 / 51.90
- 42
- 43
- 44
- 45
- 46.4
- 47
- 48.20 - 63.00
- 48.69 - 63.50
- 48.7
- 49.4
- 50
- 50
- 50.50 / 61.90
- 50.8
- 51
- 51.2
- 51.20 - 66.00
- 51.30 - 66.00
- 52
- 52.2
- 54
- 54.08
- 55
- 60
- 61.39 - 76.20
- 61.7
- 62.5
- 62.992
- 63
- 63
- 63.4
- 63.5
- 63.50 / 74.90
- 64
- 64.08
- 65
- 65.20 - 80.00
- 66
- 66.04
- 68
- 69.20 - 84.00
- 69.40 - 84.00
- 69.7
- 70
- 75
- 75.5
- 75.997
- 76
- 76.2
- 77.08
- 77.08
- 77.2
- 78.08
- 78.7
- 80
- 80
- 80.01
- 82
- 83.4
- 84
- 85.20 - 100.00
- 86
- 86.7
- 86.79 - 101.60
- 88
- 89.4
- 90
- 92.5
- 94.08
- 94.08
- 98.7
- 98.8
- 100
- 100.00 - 107.00
- 101.3
- 101.6
- 101.60 - 108.61
- 101.60 - 117.40
- 102
- 103
- 105
- 106.7
- 109
- 110
- 112.5
- 114.08
- 114.08
- 118.8
- 120
- 123.7
- 124.6
- 125
- 125.00 - 132.00
- 127
- 127.00 - 134.01
- 127.00 - 142.80
- 128.4
- 130
- 131.4
- 131.7
- 136
- 137.5
- 138.8
- 139.08
- 139.08
- 140
- 150
- 152
- 152.4
- 152.40 - 159.41
- 152.40 - 168.20
- 159.6
- 160
- 160.00 - 167.00
- 166.7
- 172.5
- 174.08
- 174.08
- 178.8
- 180
- 200
- 200.00 - 207.00
- 203
- 203.2
- 203.20 - 210.21
- 203.20 - 219.00
- 212.5
- 218.8
- 249.6
- 250
- 250.00 - 257.00
- 250.00 - 265.80
- 254
- 254.00 - 261.00
- 254.00 - 261.01
- 254.00 - 269.80
- 262.5
- 268.8
- 304.8
- 304.80 - 311.81
- 305
- 314.6
- 315
- 315.00 - 322.00
- 354.6
- 355
- 355.00 - 362.00
- 399.6
- 400
- 400.00 - 407.00
- 406
- 406.40 - 413.41
- 499.6
- 500
- 500.00 - 507.00
- 508
- 508.00 - 515.01
-
work material
- General Steel
- Quenched and tempered steel
- High Hardness Steel
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
-
Mounting Method
-
Finish category
- Rough and medium rough processing
- Finishing
- Rough to Finish Processing
-
Overall length (L)(mm)
-
2.18～5.82
- 2.18
- 2.64
- 2.7
- 2.79
- 3.66
- 3.7
- 4.52
- 4.7
- 5.7
- 5.82
-
19.99
-
20～29.06
- 20
- 24.99
- 25
- 26
- 27
- 29.06
-
30～38
- 30
- 32
- 33
- 35
- 38
-
40～49
- 40
- 40$40.7
- 40.01
- 41.05
- 41.78
- 42.95
- 43
- 44.5
- 45
- 45.009
- 46
- 48
- 49
-
50～59.99
- 50
- 50$50.7
- 50.01
- 50.013
- 51
- 53.26
- 54
- 56.9
- 57
- 59.08
- 59.99
-
60～68
- 60
- 60.25
- 61.77
- 62.99
- 62.992
- 63
- 63$63.7
- 63.5
- 65
- 68
-
70～79
- 70
- 70.002
- 73
- 74
- 75
- 76
- 77.7
- 78
- 79
-
80～89.99
- 80
- 81
- 83
- 84
- 84.7
- 85
- 88
- 89.99
-
90～98.7
- 90
- 91
- 92
- 95
- 96
- 98
- 98.7
-
100～109
- 100
- 101
- 102
- 103
- 104
- 105
- 107
- 108
- 109
-
110～119.99
- 110
- 110.01
- 111
- 112
- 115
- 117
- 119.99
-
120～128
- 120
- 121
- 123
- 123.5
- 124
- 125
- 127
- 128
-
130～138
- 130
- 131
- 132
- 133
- 134
- 134.6
- 135
- 136
- 137
- 138
-
140～147
- 140
- 141
- 143
- 144
- 144.78
- 145
- 147
-
150～159.99
- 150
- 152.4
- 155
- 158
- 159.99
-
160～166
- 160
- 161
- 165
- 165.1
- 166
-
170～177
- 170
- 171
- 172
- 173
- 175
- 176
- 177
-
180～187
- 180
- 184.6
- 185
- 186
- 187
-
190～191
- 190
- 190.5
- 191
-
200～209
- 200
- 203.2
- 207
- 209
-
210～219
- 210
- 215
- 217
- 219
-
220～228.6
- 220
- 221
- 228.6
-
230
-
240
-
250～257
- 250
- 254
- 255
- 256
- 257
-
260～266.8
- 260
- 266.8
-
270
-
290～296.8
- 290
- 296.8
-
300～306
- 300
- 306
-
331.8
-
350
-
-
Shank diameter (d)(mm)
-
Number of flutes(sheet)
-
Compatible Tip Material
-
Maximum Cutting Depth (Ad)(mm)
-
Underneck length (ℓ1)(mm)
Narrow search by specifying Brand
-
- MISUMI (3)
- SANDVIK (94)
- KYOCERA (51)
- OSG (30)
- DIJET (23)
- FUJIGEN (12)
- BIG KAISER (8)
- NACHI(FUJIKOSHI) (8)
- ESCO (6)
- ASAHI TOOLS (3)
- MITSUBISHI MATERIALS (1)
- PHOENIX CONTACT (1)
- TUNGALOY (1)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Cutters / Indexable End Mills
Fizetési mód
Átutalás
Előre fizetés
Igény szerinti gyártás
Tanúsítványok
Copyright © MISUMI Corporation Minden jog fenntartva.