Szűrési feltételek

Mindent töröl

  • Készlet
  • Tip angle (θ)
    [60–160/1]
  • Tool Diameter (D)(mm)
  • Tool Material Type
  • R Size (R)(mm)
  • CAD
  • Chamfer, V-Grooves

      • Corner Rounding End Mill
        • Volume Discount

        FUKUDA

        Corner Rounding End Mill

        Round chamfering end mill.
        További részletek
        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
        Round ChamferGeneral Steel[○] / Cast Iron[○] / Resin[○]Single bladeN/AHigh-speed steelN/ANon-Coated
        Normál ár (ÁFA nélkül):
        101.77 €
        Normál feladási dátum:
        6 munkanapok
        Konfigurálás
      • V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 90°
        • AKCIÓ eddig: 23.03.2025

        MAKOTOLOY

        V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 90°

        [Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.· Standard type.
        További részletek
        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
        Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling901 ~ 20General Steel[○] / Cast Iron[○] / Aluminum[○]Single bladeCarbideN/A
        Normál ár (ÁFA nélkül):
        93.69 €
        Normál ár (ÁFA nélkül):
        Speciális ár
        Normál feladási dátum:
        Raktári cikk - 1 munkanap
        Egyes tételeket még aznap fel lehet adni
        Konfigurálás
      • Back Seat Mini Chamfer (90° Blade)

          NOGAJAPAN

          Back Seat Mini Chamfer (90° Blade)

          ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
          901.5 ~ 6TiAlN
          Normál ár (ÁFA nélkül):
          96.27 €
          Normál feladási dátum:
          6 munkanapok
          Konfigurálás
        • Chamfer / Deburring Tool
          • Volume Discount

          NOGAJAPAN

          Chamfer / Deburring Tool

          [Features]· Easily deburrs the end surface after cutting threads.· It is the most efficient and easy tool to remove burrs from the outer part of round bars and pipes of size φ4 to 18 mm.
          További részletek
          ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
          Other
          Normál ár (ÁFA nélkül):
          31.08 €
          Normál feladási dátum:
          5 munkanapok
          Konfigurálás
        • SANDVIK CoroMill 326 Solid Carbide End Mill for Chamfer Milling

            SANDVIK

            SANDVIK CoroMill 326 Solid Carbide End Mill for Chamfer Milling

            ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
            6 ~ 8
            Normál ár (ÁFA nélkül):
            58.52 €
            Normál feladási dátum:
            5 munkanapok
            Konfigurálás
          • Leading Drills, TIN-NC-LDS
            • Volume Discount

            OSG

            Leading Drills, TIN-NC-LDS

            TiN Coating Makes Possible Higher Speed and Longer Life than NC-LDS
            További részletek
            ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
            Centering (Positioning) / Hole Chamfer60 ~ 1203 ~ 25General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Titanium[◎] / Copper[◎]Single bladeN/AHigh-speed steelAvailableTiN
            Normál ár (ÁFA nélkül):
            21.10 €
            Normál feladási dátum:
            6 munkanapok
            Konfigurálás
          • Chatterless Chamfer Milling Machine
            • AKCIÓ eddig: 23.03.2025
            • Volume Discount

            FUKUDA

            Chatterless Chamfer Milling Machine

            6-flute blade improves cutting force, fantastic sharpness means zero chatter, horizontal motion during face milling is possible, and the uncomfortable metallic sound during machining is drastically reduced.[Features]· Chamfering.· Drilling machines, milling machines, machining centers.· Horizontal Milling
            További részletek
            ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
            Hole Chamfer / Chamfering/Horizontal60 ~ 120General Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]Single bladeN/ACobalt HSSN/ANon-Coated
            Normál ár (ÁFA nélkül):
            42.97 €
            Normál ár (ÁFA nélkül):
            Speciális ár
            Normál feladási dátum:
            Raktári cikk - 1 munkanap
            Egyes tételeket még aznap fel lehet adni
            Konfigurálás
          • Chamfering Drill
            • Volume Discount

            NT TOOL

            Chamfering Drill

            For machining non-viscous materials[Features]· A wide range of chamfering sizes with one unit.· Beautiful cut surfaces with zero chatter.· Easy Positioning
            További részletek
            ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
            Hole Chamfer9010 ~ 25Aluminum[○] / Copper[○]Single blade / Double-edgedN/AHigh-speed steelN/A
            Normál ár (ÁFA nélkül):
            23.05 €
            Normál feladási dátum:
            6 munkanapok
            Konfigurálás
          • Silver Uni Kit NG9300

              NOGAJAPAN

              Silver Uni Kit NG9300

              A parts machining maker companion kit.[Features]· Set Contents:Noga Grip 3 / S Holder / Countersinking Bar (RC2000) / Plastic Edge Off-HandleRotary Drive Countersink 3.2 mm, 10.4 mm, 16.5 mm/18 mm Outer Diameter Rotary Drive BladeS10, S20, S30 Blade· Box Size: 215 x 120 x 40 mm
              További részletek
              ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
              Other
              Normál ár (ÁFA nélkül):
              140.23 €
              Normál feladási dátum:
              6 munkanapok
              Konfigurálás
            • Chamfering / Deburring Tool (for 1 to 3 mm Wide Inner Diameter O-Ring Grooves)
              • Volume Discount

              NOGAJAPAN

              Chamfering / Deburring Tool (for 1 to 3 mm Wide Inner Diameter O-Ring Grooves)

              [Features]· Deburring tool for the inside diameter of O-ring grooves with a 1 to 3 mm width and a depth of up to 20 mm.
              További részletek
              ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
              Other
              Normál ár (ÁFA nélkül):
              24.62 €
              Normál feladási dátum:
              5 munkanapok
              Konfigurálás
            • TS coated carbide chamfer, V grooving end mill, 2-flute
              • Volume Discount
              • TS
              • General Steel
              • 2 Flutes

              MISUMI

              TS coated carbide chamfer, V grooving end mill, 2-flute

              [Features] -Ideal for chamfers and V-grooves-It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application methods, performance range, prices, delivery times, etc.
              További részletek
              ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
              Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove60 ~ 1203 ~ 16General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Single bladeN/ACarbideAvailableTS
              Normál ár (ÁFA nélkül):
              71.59 €
              Normál feladási dátum:
              5 munkanapok
              Konfigurálás
            • Carbide Chamfering End Mill for Aluminum Machining, 2-Flute, 30° Spiral
              • Volume Discount
              • Non-Coated
              • Aluminum
              • 2 Flutes

              MISUMI

              Carbide Chamfering End Mill for Aluminum Machining, 2-Flute, 30° Spiral

              Capable of everything from positioning to chamfering in a single shot
              További részletek
              ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
              Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal903 ~ 12Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]Single bladeN/ACarbideN/A
              Normál ár (ÁFA nélkül):
              40.79 €
              Normál feladási dátum:
              5 munkanapok
              Konfigurálás
            • XAL Series Carbide Chamfer End Mill, 3-Flute / Short Type
              • Volume Discount

              MISUMI

              XAL Series Carbide Chamfer End Mill, 3-Flute / Short Type

              [Features]・Popular 3-flute type for helix angle chambering with high feed rate.・Ideal for chamfering.(V-groove machining is not possible because there is no cutting edge at the tip)・Since it has an outer peripheral flute, it can perform inclined contours and helical cutting.・With the 3-flute shape, the feed can be increased up to 1.5 times that of the 2-flute type.・Since the outer peripheral flute has a helix angle, the machining shown in the above figure is possible.・It can also be used as a deburring tool.・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.
              További részletek
              ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
              Centering (Positioning) / Hole Chamfer / Chamfering/HorizontalGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Single bladeAvailableCarbideAvailableAlCrN
              Normál ár (ÁFA nélkül):
              41.90 €
              Normál feladási dátum:
              5 munkanapok
              Konfigurálás
            • XAL Series Carbide Chamfer End Mill, 2-Flute / Short Type
              • Volume Discount

              MISUMI

              XAL Series Carbide Chamfer End Mill, 2-Flute / Short Type

              [Features]・Popular chamfering product with helix angle.・Since it has a peripheral flute, it can be used for tilting, contouring and helical cutting.・Since the outer peripheral flute has a helix angle, the machining shown in the above figure is possible. It can also be used as a deburring tool.・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.
              További részletek
              ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
              Centering (Positioning) / Hole Chamfer / Chamfering/HorizontalGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Single bladeAvailableCarbideAvailableAlCrN
              Normál ár (ÁFA nélkül):
              37.71 €
              Normál feladási dátum:
              5 munkanapok
              Konfigurálás
            • Leading Drills, FX-LDS

                OSG

                Leading Drills, FX-LDS

                90° of tip angle with FX coating, carbide leading drill. It enables high speed and long life.
                További részletek
                ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                Centering (Positioning) / Hole Chamfer9016 ~ 25General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]Single bladeN/ACarbideAvailableTiAlN
                Normál ár (ÁFA nélkül):
                357.80 €
                Normál feladási dátum:
                6 munkanapok
                Konfigurálás
              • Spiral Chamfering Cutter for SV Chamfering Process

                  UNION TOOL

                  Spiral Chamfering Cutter for SV Chamfering Process

                  [Features]· Carbide spiral chamfering cutter· Half Taper Angle of 45°· The external blade is a torsion type that limits the occurrence of burrs when compared with the straight blade type.
                  További részletek
                  ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                  Hole Chamfer / Chamfering/Horizontal / Round Chamfer900.8 ~ 1General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] / Graphite[○] / Resin[○]Single bladeN/ACarbideN/A
                  Normál ár (ÁFA nélkül):
                  135.77 €
                  Normál feladási dátum:
                  7 munkanapok
                  Konfigurálás
                • Hole Chamfering Leading Drill V Coating Powder HSS Long Shank

                    OSG

                    Hole Chamfering Leading Drill V Coating Powder HSS Long Shank

                    Leading long shank drill with powder metal high speed steel XPM as base material, with 90° V-coated point angle. Ideal for chamfering deep parts.
                    További részletek
                    ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                    Centering (Positioning) / Hole Chamfer903 ~ 25General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]Single bladeAvailablePowder high-speed steelAvailableTiCN
                    Normál ár (ÁFA nélkül):
                    23.64 €
                    Normál feladási dátum:
                    6 munkanapok
                    Konfigurálás
                  • Center reamer
                    • Volume Discount

                    FUKUDA

                    Center reamer

                    Reamers for center hole finishing or chamfering. Edges of odd number reduce chatter.
                    További részletek
                    ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                    Hole Chamfer60 ~ 120General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]Single bladeN/AHigh-speed steelN/ANon-Coated
                    Normál ár (ÁFA nélkül):
                    30.94 €
                    Normál feladási dátum:
                    6 munkanapok
                    Konfigurálás
                  • CMC MC Chamfering Cutter G2

                      ASAHI TOOLS

                      CMC MC Chamfering Cutter G2

                      Soldering shape, Angle tolerance ±15'.Shape accuracy with straight edge.Applications, Hole chamfering/bevelling/horizontal run Work material, General steel/heat treated steel/stainless steel/cast iron/aluminium/copper/resinSingle-edged blade2 blades.
                      További részletek
                      ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                      Hole Chamfer / Chamfering/Horizontal60 ~ 9010 ~ 60General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]Single bladeAvailableCarbideN/ANon-Coated
                      Normál ár (ÁFA nélkül):
                      113.60 €
                      Normál feladási dátum:
                      6 munkanapok
                      Konfigurálás
                    • Milling Cutter for 60° Chamfering Type N 6711

                        GUHRING

                        Milling Cutter for 60° Chamfering Type N 6711

                        Taper half-angle 30° chamfering milling cutter.
                        További részletek
                        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                        604 ~ 12CarbideAvailableTiAlN
                        Normál ár (ÁFA nélkül):
                        50.44 €
                        Normál feladási dátum:
                        6 munkanapok
                        Konfigurálás
                      • Umbrella-Type Cutter w/ Handle PCS

                          EIKOSHA

                          Umbrella-Type Cutter w/ Handle PCS

                          ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                          Hole Chamfer60 ~ 9015 ~ 100General Steel[○] / Aluminum[○] / Copper[○]High-speed steel / Cobalt HSSN/A
                          Normál ár (ÁFA nélkül):
                          106.30 €
                          Normál feladási dátum:
                          6 munkanapok
                          Konfigurálás
                        • Electro-Deposition Router ED-EM

                            OSG

                            Electro-Deposition Router ED-EM

                            ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                            4 ~ 12CarbideAvailable
                            Normál ár (ÁFA nélkül):
                            33.77 €
                            Normál feladási dátum:
                            6 munkanapok
                            Konfigurálás
                          • CoroMill Plura - General Purpose Chamfering End Mill, Cylindrical Shank / Weldon Shank

                              SANDVIK

                              CoroMill Plura - General Purpose Chamfering End Mill, Cylindrical Shank / Weldon Shank

                              ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                              Chamfering/Horizontal90°8 ~ 12General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]Single bladeN/ACarbideAvailableOther
                              Normál ár (ÁFA nélkül):
                              116.87 €
                              Normál feladási dátum:
                              6 munkanapok
                              Konfigurálás
                            • Back Seat Mini Chamfer (Long Reach 90° Blade)

                                NOGAJAPAN

                                Back Seat Mini Chamfer (Long Reach 90° Blade)

                                [Features]· A solid carbide chamfering cutter which can chamfer small diameter hole backs (minimum blade diameter: 3.0 mm).· Ideal for machining.· Spiral blade provides smooth sharpness.· A mini chamfer that can chamfer/deburr by milling either the back or front of the drill hole.[Applications]· Work materials: Carbon steel, stainless steel, cast steel, aluminum, plastic, nickel alloy, titanium alloy, etc.· A mini chamfer that can chamfer and deburr by milling either the back or front of the drill hole.
                                További részletek
                                ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                903 ~ 12TiAlN
                                Normál ár (ÁFA nélkül):
                                96.27 €
                                Normál feladási dátum:
                                6 munkanapok
                                Konfigurálás
                              • Chamfering Reamer (3-Flute) MC

                                  DAIICHITOOL

                                  Chamfering Reamer (3-Flute) MC

                                  [Features] Bevel reamers with an overall length of 55 to 95 mm and handle diameters of 8 mm, 10 mm and 12 mm.
                                  További részletek
                                  ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                  Chamfering/Horizontal60° ~ 90°8 ~ 46General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Single bladeAvailableCobalt HSS
                                  Normál ár (ÁFA nélkül):
                                  56.40 €
                                  Normál feladási dátum:
                                  8 munkanapok
                                  Konfigurálás
                                • V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 60°

                                    MAKOTOLOY

                                    V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 60°

                                    [Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.· Standard type.
                                    További részletek
                                    ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                    Hole Chamfer / Chamfering/Horizontal601 ~ 20General Steel[○] / Cast Iron[○] / Aluminum[○]Single bladeCarbideN/A
                                    Normál ár (ÁFA nélkül):
                                    93.69 €
                                    Normál feladási dátum:
                                    6 munkanapok
                                    Konfigurálás
                                  • V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 120°

                                      MAKOTOLOY

                                      V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 120°

                                      [Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.· Standard type.
                                      További részletek
                                      ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                      Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling1201 ~ 20General Steel[○] / Cast Iron[○] / Aluminum[○]Single bladeCarbideN/A
                                      Normál ár (ÁFA nélkül):
                                      93.69 €
                                      Normál feladási dátum:
                                      8 munkanapok
                                      Konfigurálás
                                    • V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 120°

                                        MAKOTOLOY

                                        V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 120°

                                        [Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.· Long type.
                                        További részletek
                                        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                        Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling1203 ~ 20General Steel[○] / Cast Iron[○] / Aluminum[○]Single bladeCarbideN/A
                                        Normál ár (ÁFA nélkül):
                                        110.87 €
                                        Normál feladási dátum:
                                        8 munkanapok
                                        Konfigurálás
                                      • V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 60°

                                          MAKOTOLOY

                                          V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 60°

                                          [Features]· A small but high quality end mill that can also be used with high precision machining technology.
                                          További részletek
                                          ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                          Hole Chamfer / Chamfering/Horizontal600.3 ~ 0.9General Steel[○] / Cast Iron[○] / Aluminum[○]Single bladeCarbideN/A
                                          Normál ár (ÁFA nélkül):
                                          104.69 €
                                          Normál feladási dátum:
                                          8 munkanapok
                                          Konfigurálás
                                        • SANDVIK CoroMill Plura Solid Carbide End Mill for Chamfer Milling

                                            SANDVIK

                                            SANDVIK CoroMill Plura Solid Carbide End Mill for Chamfer Milling

                                            ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                            3.17 ~ 20General Steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]
                                            Normál ár (ÁFA nélkül):
                                            59.45 €
                                            Normál feladási dátum:
                                            5 munkanapok
                                            Konfigurálás
                                          • TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model
                                            • Volume Discount
                                            • TS
                                            • General Steel
                                            • 2 Flutes

                                            MISUMI

                                            TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model

                                            Ideal for the Deep Chamfering of Workpieces
                                            További részletek
                                            ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                            Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove903 ~ 12General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Single bladeAvailableCarbideAvailableTS
                                            Normál ár (ÁFA nélkül):
                                            48.89 €
                                            Normál feladási dátum:
                                            5 munkanapok
                                            Konfigurálás
                                          • TS coated carbide chamfering end mill, 2-flute / 15° spiral
                                            • Volume Discount
                                            • TS
                                            • General Steel
                                            • 2 Flutes

                                            MISUMI

                                            TS coated carbide chamfering end mill, 2-flute / 15° spiral

                                            [Features] -The hard-to-machine flute tip and the shape that facilitates chip evacuation allow machining from positioning ( = centering) to chamfering with a single tool-The coating has high oxidation resistance and high hardness and achieves long tool life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
                                            További részletek
                                            ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                            Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal903 ~ 12General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Single bladeN/ACarbideAvailableTS
                                            Normál ár (ÁFA nélkül):
                                            42.10 €
                                            Normál feladási dátum:
                                            5 munkanapok
                                            Konfigurálás
                                          • TS coated carbide chamfering end mill, 2-flute / short model
                                            • Volume Discount
                                            • TS
                                            • General Steel
                                            • 2 Flutes
                                            • S (Short)

                                            MISUMI

                                            TS coated carbide chamfering end mill, 2-flute / short model

                                            [Features] -Ideal for chamfering. Can also be used as a deburring tool-Since it has circumferential grooves, it is possible to perform bevel, contour and oblique cutting-Since the circumferential grooves have a bevel angle, it is possible to machine as shown in the figure above-It has a coating with high oxidation resistance and high hardness, and achieves a long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for how to use the product, its performance, etc.
                                            További részletek
                                            ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                            Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal60 ~ 1203 ~ 12General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Single bladeAvailableCarbideAvailableTS
                                            Normál ár (ÁFA nélkül):
                                            38.81 €
                                            Normál feladási dátum:
                                            5 munkanapok
                                            Konfigurálás
                                          • TS coated carbide chamfering end mill, 3-flute / short model
                                            • Volume Discount
                                            • TS
                                            • General Steel
                                            • 3 Flutes
                                            • S (Short)

                                            MISUMI

                                            TS coated carbide chamfering end mill, 3-flute / short model

                                            [Features] -Ideal for chamfering (V-groove is not possible as the tip has no cutting groove).-Peripheral grooves allow bevel, contour and spiral cutting-The 3-groove shape allows feed rate improvement to the 1st step. The 3-flute shape enables up to 1.5 times the feed rate compared to the 2-flute type-With helix angle on peripheral flutes-Can also be used as a deburring tool-It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.
                                            További részletek
                                            ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                            Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal903 ~ 12General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Single bladeAvailableCarbideAvailableTS
                                            Normál ár (ÁFA nélkül):
                                            46.59 €
                                            Normál feladási dátum:
                                            5 munkanapok
                                            Konfigurálás
                                          • TS coated carbide inner R-cutter, 2-flute
                                            • Volume Discount
                                            • TS
                                            • General Steel
                                            • 2 Flutes

                                            MISUMI

                                            TS coated carbide inner R-cutter, 2-flute

                                            [Features] Easy high-quality machining of corner radii-It has a coating with high oxidation resistance and high hardness and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.
                                            További részletek
                                            ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                            Round ChamferGeneral Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Single bladeN/ACarbideAvailableTS
                                            Normál ár (ÁFA nélkül):
                                            50.04 €
                                            Normál feladási dátum:
                                            5 munkanapok
                                            Konfigurálás
                                          • Carbide inner R-cutter, 2-flute
                                            • Volume Discount
                                            • Non-Coated
                                            • General Steel
                                            • 2 Flutes

                                            MISUMI

                                            Carbide inner R-cutter, 2-flute

                                            Achieves the easy and high-quality processing of the corner R with the extensive 20 sizes
                                            További részletek
                                            ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                            Round ChamferGeneral Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Single bladeN/ACarbideN/A
                                            Normál ár (ÁFA nélkül):
                                            49.42 €
                                            Normál feladási dátum:
                                            5 munkanapok
                                            Konfigurálás
                                          • TS Coated Carbide Chamfering End Mill for Stainless Steel Machining, 2-Flute / No Side Blade
                                            • Volume Discount
                                            • TS
                                            • SUS
                                            • 2 Flutes

                                            MISUMI

                                            TS Coated Carbide Chamfering End Mill for Stainless Steel Machining, 2-Flute / No Side Blade

                                            The helix flute suppresses the occurrence of burrs in chamfering difficult-to-cut SUS, etc.
                                            További részletek
                                            ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                            Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal903 ~ 12General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○]Single bladeN/ACarbideAvailableTS
                                            Normál ár (ÁFA nélkül):
                                            74.67 €
                                            Normál feladási dátum:
                                            5 munkanapok
                                            Konfigurálás
                                          • Carbide Chamfering End Mill for Aluminum Machining, 2-Flute
                                            • Volume Discount
                                            • Non-Coated
                                            • Aluminum
                                            • 2 Flutes

                                            MISUMI

                                            Carbide Chamfering End Mill for Aluminum Machining, 2-Flute

                                            The sharp helix blade achieves the clean machined surface with less burr
                                            További részletek
                                            ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                            Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal903 ~ 12Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]Single bladeN/ACarbideN/A
                                            Normál ár (ÁFA nélkül):
                                            72.54 €
                                            Normál feladási dátum:
                                            5 munkanapok
                                            Konfigurálás
                                          • TiCN Coated Powdered High-Speed Steel Chamfering End Mill, 2-Flute, Short
                                            • Volume Discount
                                            • TiCN
                                            • 2 Flutes
                                            • S (Short)

                                            MISUMI

                                            TiCN Coated Powdered High-Speed Steel Chamfering End Mill, 2-Flute, Short

                                            The chamfer angle can be selected from 60, 90 and 120°according to the machining style
                                            További részletek
                                            ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                            Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal60 ~ 12010 ~ 25General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Single bladeAvailablePowder high-speed steelAvailable
                                            Normál ár (ÁFA nélkül):
                                            57.90 €
                                            Normál feladási dátum:
                                            5 munkanapok
                                            Konfigurálás
                                          • High-Speed Steel Chamfering End Mill, 2-Flute / Short
                                            • Non-Coated
                                            • 2 Flutes
                                            • S (Short)

                                            MISUMI

                                            High-Speed Steel Chamfering End Mill, 2-Flute / Short

                                            Chamfering end mill with the angle that can be freely selected in 1° increments
                                            További részletek
                                            ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                            Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal60 ~ 16010 ~ 25General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Single bladeAvailableCobalt HSSAvailable / N/ATiCN
                                            Normál feladási dátum:
                                            7 munkanapok
                                            Konfigurálás
                                          • XCP Series Carbide Inner Radius Cutter for High Hardness Steel Machining / 4-Flute / Short Type
                                            • Volume Discount

                                            MISUMI

                                            XCP Series Carbide Inner Radius Cutter for High Hardness Steel Machining / 4-Flute / Short Type

                                            [Features]・MISUMI's original inner radius cutter specialized for machining high hardness steel.・Ideal for high hardness steel inner radius machining up to 65 HRC.・High-efficiency machining is possible by adopting a 4-flute shape.・Ideal for high speed machining and dry machining of heat-treated steel and high hardness steel due to the coating with high oxidation-resistance temperature and high hardness.・The finish of the surface roughness of the workpiece after machining is very good.
                                            További részletek
                                            ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                            Round ChamferGeneral Steel[○] / Quenched and tempered steel[○] / High Hardness Steel[◎] / Stainless Steel[○] / Cast Iron[◎]Single bladeN/ACarbideAvailableAlCrN
                                            Normál ár (ÁFA nélkül):
                                            74.16 €
                                            Normál feladási dátum:
                                            5 munkanapok
                                            Konfigurálás
                                          • XAL Series Carbide Chamfer End Mill, 2-Flute / 15° Helix Angle
                                            • Volume Discount

                                            MISUMI

                                            XAL Series Carbide Chamfer End Mill, 2-Flute / 15° Helix Angle

                                            [Features]・Machining from positioning to chamfering with a single tool.
                                            További részletek
                                            ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                            Centering (Positioning) / Hole Chamfer / Chamfering/HorizontalGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Single bladeN/ACarbideAvailableAlCrN
                                            Normál ár (ÁFA nélkül):
                                            42.61 €
                                            Normál feladási dátum:
                                            5 munkanapok
                                            Konfigurálás
                                          • XAL Series Carbide Chamfer End Mill 2-Flute
                                            • Volume Discount

                                            MISUMI

                                            XAL Series Carbide Chamfer End Mill 2-Flute

                                            [Features]・Recommended for chamfering general steel.・Ideal for chamfering and V-groove machining.・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.
                                            További részletek
                                            ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                            Centering (Positioning) / Hole Chamfer / Chamfering/HorizontalGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Single bladeN/ACarbideAvailableAlCrN
                                            Normál ár (ÁFA nélkül):
                                            32.62 €
                                            Normál feladási dátum:
                                            5 munkanapok
                                            Konfigurálás
                                          • XAL Series Carbide Chamfering / V-Groove End Mill, 2-Flute / Long Shank Type
                                            • Volume Discount

                                            MISUMI

                                            XAL Series Carbide Chamfering / V-Groove End Mill, 2-Flute / Long Shank Type

                                            [Features]・Recommended for deep section chamfering of general steel.・Ideal for chamfering and V-groove machining.・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.・The long type is ideal for deep cavity milling.
                                            További részletek
                                            ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                            Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V GrooveGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Single bladeAvailableCarbideAvailableAlCrN
                                            Normál ár (ÁFA nélkül):
                                            43.97 €
                                            Normál feladási dátum:
                                            5 munkanapok
                                            Konfigurálás
                                          • XAL Series Carbide Inner Radius Cutter, 2-Flute
                                            • Volume Discount

                                            MISUMI

                                            XAL Series Carbide Inner Radius Cutter, 2-Flute

                                            [Features]・An essential item for corner rounding.
                                            További részletek
                                            ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                            General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Single bladeN/ACarbideAvailableAlCrN
                                            Normál ár (ÁFA nélkül):
                                            50.04 €
                                            Normál feladási dátum:
                                            5 munkanapok
                                            Konfigurálás

                                          Legutóbb megtekintett termékek