Szűrési feltételek

Mindent töröl

  • Application
  • work material
  • Tool Material Type
  • Gyártó
  • CAD

Chamfer, V-Grooves (Coating Type: AlCrN)

    • XAL Series Carbide Chamfer End Mill, 3-Flute / Short Type
      • Volume Discount

      MISUMI

      XAL Series Carbide Chamfer End Mill, 3-Flute / Short Type

      [Features]・Popular 3-flute type for helix angle chambering with high feed rate.・Ideal for chamfering.(V-groove machining is not possible because there is no cutting edge at the tip)・Since it has an outer peripheral flute, it can perform inclined contours and helical cutting.・With the 3-flute shape, the feed can be increased up to 1.5 times that of the 2-flute type.・Since the outer peripheral flute has a helix angle, the machining shown in the above figure is possible.・It can also be used as a deburring tool.・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.
      További részletek
      ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
      Centering (Positioning) / Hole Chamfer / Chamfering/HorizontalGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Single bladeAvailableCarbideAvailableAlCrN
      Normál ár (ÁFA nélkül):
      41.90 €
      Normál feladási dátum:
      5 munkanapok
      Konfigurálás
    • XAL Series Carbide Chamfer End Mill, 2-Flute / Short Type
      • Volume Discount

      MISUMI

      XAL Series Carbide Chamfer End Mill, 2-Flute / Short Type

      [Features]・Popular chamfering product with helix angle.・Since it has a peripheral flute, it can be used for tilting, contouring and helical cutting.・Since the outer peripheral flute has a helix angle, the machining shown in the above figure is possible. It can also be used as a deburring tool.・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.
      További részletek
      ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
      Centering (Positioning) / Hole Chamfer / Chamfering/HorizontalGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Single bladeAvailableCarbideAvailableAlCrN
      Normál ár (ÁFA nélkül):
      37.71 €
      Normál feladási dátum:
      5 munkanapok
      Konfigurálás
    • XCP Series Carbide Inner Radius Cutter for High Hardness Steel Machining / 4-Flute / Short Type
      • Volume Discount

      MISUMI

      XCP Series Carbide Inner Radius Cutter for High Hardness Steel Machining / 4-Flute / Short Type

      [Features]・MISUMI's original inner radius cutter specialized for machining high hardness steel.・Ideal for high hardness steel inner radius machining up to 65 HRC.・High-efficiency machining is possible by adopting a 4-flute shape.・Ideal for high speed machining and dry machining of heat-treated steel and high hardness steel due to the coating with high oxidation-resistance temperature and high hardness.・The finish of the surface roughness of the workpiece after machining is very good.
      További részletek
      ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
      Round ChamferGeneral Steel[○] / Quenched and tempered steel[○] / High Hardness Steel[◎] / Stainless Steel[○] / Cast Iron[◎]Single bladeN/ACarbideAvailableAlCrN
      Normál ár (ÁFA nélkül):
      74.16 €
      Normál feladási dátum:
      5 munkanapok
      Konfigurálás
    • XAL Series Carbide Chamfer End Mill, 2-Flute / 15° Helix Angle
      • Volume Discount

      MISUMI

      XAL Series Carbide Chamfer End Mill, 2-Flute / 15° Helix Angle

      [Features]・Machining from positioning to chamfering with a single tool.
      További részletek
      ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
      Centering (Positioning) / Hole Chamfer / Chamfering/HorizontalGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Single bladeN/ACarbideAvailableAlCrN
      Normál ár (ÁFA nélkül):
      42.61 €
      Normál feladási dátum:
      5 munkanapok
      Konfigurálás
    • XAL Series Carbide Chamfer End Mill 2-Flute
      • Volume Discount

      MISUMI

      XAL Series Carbide Chamfer End Mill 2-Flute

      [Features]・Recommended for chamfering general steel.・Ideal for chamfering and V-groove machining.・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.
      További részletek
      ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
      Centering (Positioning) / Hole Chamfer / Chamfering/HorizontalGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Single bladeN/ACarbideAvailableAlCrN
      Normál ár (ÁFA nélkül):
      32.62 €
      Normál feladási dátum:
      5 munkanapok
      Konfigurálás
    • XAL Series Carbide Chamfering / V-Groove End Mill, 2-Flute / Long Shank Type
      • Volume Discount

      MISUMI

      XAL Series Carbide Chamfering / V-Groove End Mill, 2-Flute / Long Shank Type

      [Features]・Recommended for deep section chamfering of general steel.・Ideal for chamfering and V-groove machining.・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.・The long type is ideal for deep cavity milling.
      További részletek
      ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
      Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V GrooveGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Single bladeAvailableCarbideAvailableAlCrN
      Normál ár (ÁFA nélkül):
      43.97 €
      Normál feladási dátum:
      5 munkanapok
      Konfigurálás
    • XAL Series Carbide Inner Radius Cutter, 2-Flute
      • Volume Discount

      MISUMI

      XAL Series Carbide Inner Radius Cutter, 2-Flute

      [Features]・An essential item for corner rounding.
      További részletek
      ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
      General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Single bladeN/ACarbideAvailableAlCrN
      Normál ár (ÁFA nélkül):
      50.04 €
      Normál feladási dátum:
      5 munkanapok
      Konfigurálás