Carbide Straight Blade Radius End Mill, 2-Flute, Rounded Inner Model (Part Numbers)
Click on this image to zoom in.
Click on this image to zoom in.
-Corner radius shape neck-inner radius type, which realises efficient machining
.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
| Part Number | Minimum order quantity | Volume Discount | Shank Diameter d (mm) | Overall Length L (mm) | Bottom Blade Shape | Flute Diameter (D) (mm) | Flute Length (ℓ) (mm) | Innar R (CR) (mm) | Radius (R) (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 7 Days | 4 | 50 | F (Flat) / T (Center Dented) | 2.01 ～ 3.7 | 2 ～ 15 | 0.1 ～ 0.94 | 0.1 ～ 1.75 | ||
| 1 | 7 Days | 6 | 60 | F (Flat) / T (Center Dented) | 3.01 ～ 5.7 | 3 ～ 15 | 0.1 ～ 1.44 | 0.1 ～ 2.75 | ||
| 1 | 7 Days | 8 | 60 | F (Flat) / T (Center Dented) | 4.01 ～ 7.7 | 4 ～ 15 | 0.1 ～ 1.94 | 0.1 ～ 3.75 | ||
| 1 | 7 Days | 10 | 80 | F (Flat) / T (Center Dented) | 6.01 ～ 9.7 | 5 ～ 15 | 0.1 ～ 1.94 | 0.1 ～ 4.75 | ||
| 1 | 7 Days | 12 | 80 | F (Flat) / T (Center Dented) | 8.01 ～ 11.7 | 6 ～ 15 | 0.1 ～ 1.94 | 0.1 ～ 5.75 | ||
| 1 | 7 Days | 16 | 100 | F (Flat) / T (Center Dented) | 10.01 ～ 15.7 | 8 ～ 15 | 0.1 ～ 2.94 | 0.1 ～ 7.75 |
Loading...
Specifications
[ ! ]Even if dimensions within the specifiable range are specified, depending on the combination of each dimension some products may be unable to be manufactured.
| Model Number | Outer Diameter D 0.01 mm Increment Designation |
Radius R 0.01 mm Increment Designation |
Flute Length ℓ 0.5 mm Increment Designation |
Inner Curve CR 0.01 mm Increment Designation |
Bottom Blade Shape (Selection) |
Large Diameter D1 |
Overall Length L |
|
| Shank Diameter d |
||||||||
| SRCREM | 4 | 2.01 ~3.70 | 0.10 ≤ R ≤ (D - 0.2) / 2 | 2.0 ~ 15.0 | 0.10 ≤ CR ≤ (d - D - 0.1) / 2 | T (Dished) F (Flat) Bottom Blade Shape>>P.608 |
2R + D + 0.1 | 50 |
| 6 | 3.01 ~5.70 | 3.0 ~ 15.0 | 60 | |||||
| 8 | 4.01 ~7.70 | 4.0 ~ 15.0 | 60 | |||||
| 10 | 6.01 ~9.70 | 5.0 ~ 15.0 | 80 | |||||
| 12 | 8.01 ~ 11.70 | 6.0 ~ 15.0 | 80 | |||||
| 16 | 10.01 ~ 15.70 | 8.0 ~ 15.0 | 100 |
For Cutting Conditions, Refer to >>Click here.
Basic information
| Material | Ultrafine Particulate Carbide | Large Diameter D1(mm) | 2CR + D + 0.1 |
|---|
Configure
Basic Attributes
-
Shank Diameter d(mm)
- 4
- 6
- 8
- 10
- 12
- 16
-
Overall Length L(mm)
-
Bottom Blade Shape
- F (Flat)
- T (Center Dented)
-
Flute Diameter (D)(mm)
-
Flute Length (ℓ)(mm)
-
Innar R (CR)(mm)
-
Radius (R)(mm)
-
Type
- SRCREM
Filter by standard shipping days
-
- All
- 7 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Fizetési mód
Átutalás
Előre fizetés
Igény szerinti gyártás
Tanúsítványok
Copyright © MISUMI Corporation Minden jog fenntartva.