Timing Belt Pulleys / T5 / Flanged Pulley Deselectable / Configurable / Aluminium, Steel

Volume Discount

View the FAQ (10)

MISUMI

Order quantities extended (D-JIT)

(i)Remark

Please note that the swaged flange options, NFC, RFC, and LFC, are not reflected in the CAD data.

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
More Information
Catalog
Technical Information

Back to the Category Toothed Pulleys/Timing Pulleys/Idler Pulleys

Technical Drawing - Toothed Pulleys/Timing Pulleys/Idler Pulleys

Open the technical drawing in the new window

For aluminum flanges, the flange thickness is 1.5.
Shaft Bore Specs. H (Round hole), V or F (Stepped Hole), Y (Both Sides Stepped Hole) and WB (Two-stepped Hole) do not have tapped holes.
The tolerance of the tap position dimension from the boss end face and pulley end face is ±0.3.
Unless otherwise specified except for teeth and F dimensions, the dimension tolerance conforms to JIS B 0405 Class m.
Surface treatment may not be applied to the shaft bores.

Available dimensions and tolerances can be found under the tab More Information.

Basic Properties (e.g., material, hardness, coating, tolerance) - Toothed Pulleys/Timing Pulleys/Idler Pulleys

■Types Table

Type	Belt Width					[M] Material		[S] Surface Treatment	[A] Accessory Set Screws
	5 mm	10 mm	15 mm	20 mm	25 mm	Pulley	Flange
	T5050	T5100	T5150	T5200	T5250	Pulley	Flange
TTPA	●	●	●	●	●	Aluminum alloy	Aluminum alloy	Clear Anodize	EN 1.4301 Equiv.
TTPB	●	●	●	●	●			Black Anodize
TTPK	●	●	●	●	●			Hard Clear Anodize
TTPN	●	●	●	●	●			Electroless nickel plating
TTPT	●	●	●	●	●	EN 1.1191 Equiv.	EN 1.0330 Equiv.	—	EN 1.7220 Equiv. (Black Oxide)
TTPM	●	●	●	●	●			Black Oxide Coating
TTPP	●	●	●	●	●			Electroless nickel plating
TTPS	●	●	●	●	●	EN 1.4301 Equiv.	EN 1.4301 Equiv.	—	EN 1.4301 Equiv.

Flange is already swaged, and set screws are included for Shaft Bores P, N and C.

Further specifications can be found under the tab More Information.

Composition of a Product Code - Toothed Pulleys/Timing Pulleys/Idler Pulleys

Part number

—

Pulley Shape

—

Shaft Bore Specs.: I.D.

—

(Shaft Bore Specs.: H, P, N, C)

TTPA18T5100

—

NK10

(Shaft Bore Specs.: V, F)

TTPA30T5200

—

V10

—

Z23

—

J16.0

(Shaft Bore Specs.: Y, WB)

TTPA48T5150

—

Y25

—

Q42

—

R37

—

Alterations - Toothed Pulleys/Timing Pulleys/Idler Pulleys

Here to the Overview of Options as PDF .

General Information - Toothed Pulleys/Timing Pulleys/Idler Pulleys

Toothed pulley - synchronous pulley - belt pulley - product assortment

Selection details of toothed pulleys/timing pulleys/idler pulleys

- Material: aluminum, steel, stainless steel (stainless steel), plastic

- Coatings: uncoated, burnished, anodized, nickel-plated

- Profile form: 1.5GT, 2GT, 3GT, 5GT, P2M, P3M, P5M, P8M, S2M, S3M, S5M, S8M, S14M, T2.5, T5, T10, AT5, AT10, 5M, 8M, 14M, 8YU, H, L, MXL, XL, PowerGrip GT3: MR2, MR3, MR5

- ISO tolerances: H7

- Belt width (mm): 4, 4.8, 6, 6.4, 7, 7.9, 9, 9.5, 10, 12, 12.7, 15, 18, 19.1, 20, 25, 25.4, 26, 28, 30, 31, 38,1, 40, 50, 50.8, 53, 60, 74, 76.2, 100

- Belt width (inches): 0.19, 0.25, 0.31, 0.37, 0.5, 0.75, 1, 1.5, 2

- Number of teeth: 10 to 72

Description/Basics

The toothed pulley for mechanical engineering is intended for the transmission of force and torque. Timing pulleys enable a gear ratio of speeds through belt pulleys of different sizes. Timing pulleys are more efficient, durable and significantly more maintenance-friendly compared to chain transmissions.

How much torque and load a timing pulley can transmit depends on the width of the belt. The width of the belt must be calculated. It is recommended to ensure the belt is correctly tensioned. MISUMI already offers the suitable idler pulley and return rollers with integrated ball bearings. For design and design help follow this link.

Different profile shapes of the toothed belts and belt pulleys are responsible for the transmission of power. Depending on the positioning accuracy, the applied torque and the conveying weight, MISUMI offers the fitting pulley. Toothed belt drives are generally used in the industry in three areas:
Positioning: Timing pulleys is often used in 3D printers. A toothed pulley with a semi-circular profile (e.g., GT) is often used for the required position accuracy of a 3D printers. The round shape offers the benefit of little play when the direction changes.
Drive: toothed pulleys are also used for high torque. In most cases, a timing pulley with a rounded trapezoidal profile (e.g., S8M) is used. These are particularly well suited for the transmission of high forces, which occur in drives of various applications in order to drive mechanical components.
Conveying: toothed pulleys can also be used for transporting loads. A straight trapezoidal profile is often used for this purpose (e.g., AT). This toothed pulley shape offers a large surface for loading and transmitting of loads.

Which toothed pulley or timing pulley is the right one for your application depends on the respective task of the toothed belt drive. Different toothed disc profiles have proven themselves for each type of application.

Various bore hole shapes and fastening variants are available for shaft mounting. These allow fastening via set screws, keyways and by means of Mecha locks. Fastening via a clamping sleeve has the further advantage that it allows adjusting the alignment continuously. The MISUMI product assortment has these ready-to-install.

Application Examples - Toothed Pulleys/Timing Pulleys/Idler Pulleys

Application example: idler pulley - idler pully toothed with chain tensioner - toothed pulley with chain tensioner

Application example: idler pulley
(1) Idler pulleys, (2) chain tensioner

Application example: return roller - return roller with cantilever pin - synchronous pulley with on-board disc - toothed pulley with on-board disc

Application example: deflection roller
S (1) Toothed pulleys with crimp disc, (2) nut, (3) washer, (4) cantilever shaft, (5) retaining ring

Application example: synchronous pulleys - toothed pulleys with toothed belts - toothed pulley with screw-on clamp

Application example: timing pulleys
(1) Flat head screw, (2) Timing pulley, (3) Timing belt, (4) Screw-on terminal

Application example: toothed belt drives - toothed pulleys with crimp disc - idler pulley with crimp disc - tensioning of the toothed belt

Application example: of toothed belt drives
(1) Toothed belt, (2) driven toothed pulley with crimp disc, (3) idler pulley with crimp disc, (4) driving toothed pulley with crimp disc

Industrial Applications

3D printer industry

Automotive industry

Pharmaceutical industry

Packaging industry

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
TTPA12T5100-A-P8
TTPA12T5100-A-P8

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	RoHS	Belt Width (mm)	[T] Number of Teeth	Pulley Shape	Material	Surface Treatment	[Y] Shaft Bore Specification (Both Ends Stepped Hole) (mm)	[N] Shaft Bore Specification (New JIS Keyway Hole + Tap) (mm)	[C] Shaft Bore Specification (Old JIS Keyway Hole + Tap) (mm)	[P] Shaft Bore Specification (Round Hole + Tap) (mm)	[H] Shaft Bore Specif+A6ication (Round Hole) (mm)	[NK] Shaft Bore Specification (Shaft Bore Dia. 10 Keyway Width 4mm Height 1.8mm) (mm)	[V] Shaft Bore Specification (Stepped Hole) (mm)	[F] Shaft Bore Specification (Stepped Hole: Counterbored Holes on the Hub Side) (mm)	[WB] Shaft Bore Specification (Two-Stepped Hole on one side) (mm)
	21.13 €	1	Available	Same day Stock	-	10	12	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	-	-	-	-
	-	1		6 Days	10	10	12	Shape A	[Aluminum] 2000 Series Aluminum Alloy (Duralumin)	Clear Anodize	-	-	-	8	-	-	-	-	-

Back to the Category Toothed Pulleys/Timing Pulleys/Idler Pulleys

Technical Drawing - Toothed Pulleys/Timing Pulleys/Idler Pulleys

Open the technical drawing in the new window

Specification Tables - Toothed Pulleys/Timing Pulleys/Idler Pulleys

Part number			Pulley Shape	Pulley Shape						P.D.	O.D	D	F	E
Type	Number of Teeth	Type Nominal Width		A			B
				Shaft Bore Specs.: 1 mm Increments / Selectable
				H (d) Round Hole V (d), Y (d), WB (d) Z·Q·R Stepped Hole	P (d) Round Hole + Tapped	N (d), C (d) Keyway + Tapped	H (d) Round Hole V (d), F (d), Z Stepped Hole	P (d) Round Hole + Tapped	N (d), C (d) Keyway + Tapped
Aluminum TTPA TTPB TTPK TTPN Steel TTPT TTPM TTPP Stainless Steel TTPS	12	T5050 (Shape B only) T5100 T5150 T5200 T5250	A	5 to 8	5 to 8	8	—	—	—	19.10	18.25	—	24	12
	13									20.69	19.85		25	15
	14		A B	5 to 12	5 to 10	8·10	5 to 10	5 to 8		22.28	21.45	14	26	16
	15			5 to 14			5 to 11			23.87	23.05	15	28	18
	16			6 to 16	6 to 12	8 to 12	6 to 13	6 to 10	8	25.46	24.60	17	32	20
	17									27.06	26.20
	18			6 to 18			6 to 15	6 to 11	8·10	28.65	27.80	19	33	22
	19			6 to 20	6 to 16	8 to 16		6 to 12		30.24	29.40		36	24
	20									31.83	31.00
	21			7 to 23	7 to 18	8 to 18	7 to 20	7 to 15	8 to 12	33.42	32.62	24	40	27
	22									35.01	34.25
	23			7 to 26	7 to 20	8 to 20	7 to 23	7 to 17	8 to 13	36.61	35.83	27	45	30
	24									38.20	37.40
	25							7 to 18	8 to 15	39.79	39.00
	26			8 to 31	8 to 23	8 to 22	8 to 27	8 to 21	8 to 17	41.38	40.60	31	48	35
	27				8 to 24	8 to 24	8 to 28	8 to 22	8 to 18	42.97	42.17	32
	28									44.56	43.75
	29									46.15	45.35
	30			10 to 32	10 to 26	10 to 26	10 to 29	10 to 23	10 to 18	47.75	46.95	33	52	36
	31			10 to 36	10 to 28	10 to 28	10 to 31	10 to 25	10 to 20	49.34	48.53	35	55	40
	32						10 to 33	10 to 27	10 to 22	50.93	50.10	37
	33			10 to 41	10 to 30	10 to 30	10 to 36	10 to 30	10 to 25	52.52	51.67	40	61	45
	34									54.11	53.25
	35									55.70	54.85
	36									57.30	56.45
	37			10 to 46	10 to 38	10 to 38				58.89	58.05		67	50
	38									60.48	59.65
	39						10 to 43	10 to 37	10 to 30	62.07	61.25	47
	40									63.66	62.85
	41			12 to 54	12 to 42	12 to 40	12 to 46	12 to 40	12 to 32	65.25	64.43	50	74	58
	42									66.84	66.02
	43									68.44	67.62
	44									70.03	69.20
	45			12 to 56	12 to 44					71.62	70.79		80	60
	46									73.21	72.37
	47			12 to 59	12 to 47		12 to 56	12 to 45	12 to 40	74.80	73.96	60	83	63
	48									76.39	75.55
	49			12 to 63	12 to 50	12 to 45	12 to 59	12 to 47	12 to 45	77.99	77.15	63	87	67
	50									79.58	78.75
	51									81.17	80.34
	52									82.76	81.93
	53			12 to 67	12 to 50	12 to 50	12 to 66	12 to 50	12 to 48	84.35	83.52	70	95	75
	54									85.94	85.11
	55									87.54	86.71
	56									89.13	88.30
	57			12 to 76			12 to 71	12 to 50	12 to 50	90.72	89.89	75	99	80
	58									92.31	91.48
	59									93.90	93.07
	60									95.49	94.65
Shaft Bore Dia.9 is not available for Shaft Bore Spec. N. Shaft Bore Dia.6.35 is selectable for Shaft Bore Specs. H, P, V, and F. NK10 is selectable for Shaft Bore Spec. N. Shaft Bore Dia. 8, 11, 13, 14, 17, or 21 to 50 are not available for Shaft Bore Spec. C.

Alterations - Toothed Pulleys/Timing Pulleys/Idler Pulleys

Here to the Option Overview PDF

Products homepage

Basic information

Type	Timing Pulleys	Belt Type	T5	Timing Pulleys/Idlers	Pulleys

Configure

2Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Stock

- Show only stock items
Clear

Basic Attributes

[Y] Shaft Bore Specification (Both Ends Stepped Hole)(mm)
5

6
Clear
[N] Shaft Bore Specification (New JIS Keyway Hole + Tap)(mm)
8

10

11

12

13
Clear
[C] Shaft Bore Specification (Old JIS Keyway Hole + Tap)(mm)
10

12

15

16

18

19

20
Clear
[P] Shaft Bore Specification (Round Hole + Tap)(mm)
5

6

6.35

7

8

9

10
Clear
[H] Shaft Bore Specif+A6ication (Round Hole)(mm)
5

6

6.35

7

8
Clear
[NK] Shaft Bore Specification (Shaft Bore Dia. 10 Keyway Width 4mm Height 1.8mm)(mm)
10
Clear
[V] Shaft Bore Specification (Stepped Hole)(mm)
5

6

6.35

7

8

9

10
Clear
[F] Shaft Bore Specification (Stepped Hole: Counterbored Holes on the Hub Side)(mm)
5

6

6.35

7

8

9

10
Clear
[WB] Shaft Bore Specification (Two-Stepped Hole on one side)(mm)
5

6
Clear
Type
- TTPA□□T5
- TTPB□□T5
- TTPK□□T5
- TTPM□□T5
- TTPN□□T5
- TTPP□□T5
- TTPS□□T5
- TTPT□□T5
Clear
Belt Width(mm)
5

10

15

20

25
Clear
[T] Number of Teeth
12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

43

44

45

46

47

48

49

50

51

52

53

54

55

56

57

58

59

60
Clear
Pulley Shape
- Shape A
- Shape B
Clear
Material
- EN 1.1191 Equiv.
- Aluminum
  - EN AW-2017 Equiv. (Duralumin)
  - 2000 Series Aluminum Alloy (Duralumin)
  - Aluminum Alloy
  - High Strength Aluminum Alloy
- EN 1.4301 Equiv.
Clear
Surface Treatment
- Not Provided
- Black Oxide
- Clear Anodize
- Black Anodized Aluminum
- Hard Clear Anodize
- Electroless Nickel Plating
Clear
Filter by CAD data type
- 2D
- 3D
Clear

Filter by standard shipping days

All

Same day

5 Days or Less

6 Days or Less

7 Days or Less

9 Days or Less

10 Days or Less

11 Days or Less

13 Days or Less

14 Days or Less
Reset

Optional Attributes

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently Asked Questions (FAQ)

Question:
Do you have any belt pulleys without a hole?: Answer:
The MISUMI toothed pulleys always have a pilot bore. It is expanded depending on your configuration. It provides the advantage that the belt pulleys are already provided with a suitable shaft bore ready for installation. Therefore, it does not require time-consuming post-processing.
Question:
Do you have timing pulleys made of aluminum?: Answer:
The MISUMI online shop also offers timing pulleys or toothed pulleys in aluminum. Furthermore, we are also offering belt pulleys in steel and stainless steel. The return rollers and idler pulleys for the timing belts are also available in plastic.
Question:
Is a transmission with toothed belt pulleys possible?: Answer:
With toothed pulleys, a gear ratio is possible in a drive. The gear ratio is established based on the number of teeth on the belt pulleys. It should be ensured that the minimum number of teeth of the timing pulley disc is not undercut.
Question:
Which type of the toothed belt pulley can be clamped during assembly?: Answer:
There are a number of ways to install timing pulleys on a shaft. For applications that are not exposed to high torque, such as conveyors, it can be sufficient to fasten a timing pulley using clamping threaded pins. For this purpose, the shaft should have a flat surface.
For higher loads, a toothed pulley with a keyway can also be used.
A further variant is the fastening of a timing pulley via a conical chip sleeve. Depending on the type of Mecha lock, the timing pulley requires lateral internal threads, which can be added through additional options in the MISUMI online shop.
A timing pulley with a bore hole can also be combined with a Mech lock. MISUMI is offering this combination as a set.
Question:
Where do you position the tension roller?: Answer:
If an idler pulley should be utilised, it should be positioned on the sag side. This means that the idler pulley is attached to the side not subjected to pull.
Ideally, a toothed idler pulley is mounted on the inside of the toothed belt. The tensioning roller should always be larger than the smallest toothed idler pulley of the belt drive system.
If an idler pulley must tension the toothed belt from the outside, then a non-toothed (flat) idler pulley should be used. Cantilever pins, which MISUMI offers in various geometric versions, are suitable for fastening.
Question:
Which parallel key can be used for the toothed pulleys?: Answer:
The parallel key size is based on the shaft diameter. In this case, it is recommended using the MISUMI parallel keys, as they fit better when MISUMI toothed pulleys are used. See Overview available as PDF for keyway tolerances.
Question:
Is a timing pulley with a round profile better?: Answer:
Timing pulleys and round-profile timing belts are not recommended for every application. For example, the round profile shape is well suited for applications that require high positioning accuracy. Therefore, they are often used in 3D printers and scanners. Compared to other profile shapes, the round profile shape has a higher wear resistance. Another advantage of the round profile shape is the minimized play in the return (reverse play).
Question:
Which belt pulley is suitable for Gates toothed belts?: Answer:
The GT and EV timing pulleys are suitable for Gates’ toothed belts. However, these require you put attention to the slope (distance of the teeth) of the toothed belt. It must be checked whether these correspond to the selected toothed pulley.
Question:
Are the curtain discs necessary for the toothed pulleys?: Answer:
It is recommended using the smaller belt pulleys particularly with curb disc. The curb disk ensures that the toothed belt does not migrate down from the toothed belt pulley. Even with the smallest misalignment of a pulley, there may be a risk that the toothed belt will move and jump during operation.
Question:
How is the gearing of the toothed pulleys manufactured?: Answer:
The gear teeth of the MISUMI toothed belt pulley are mainly pushed. This ensures high manufacturing accuracy. As a result, the teeth fit precisely into the toothed belt profile of the timing belts and ensure optimal power and torque transmission.