Szűrési feltételek
- Post Dia.(mm)
- 8
- 10
- 12
- 15
- 20
- 25
- 30
- 35
- Material
- Steel
- Surface Treatment
- D1
- 6
- 8
- 10
- 15
- 16
- 20
- 25
- CAD
- 2D
- 3D
- Becsült szállítási napok
- Minden
- 16 munkanapok belül
Perpendicular Configuration / Different Diameter Shaft Holes / Squared Ends
Cikkszám:
javaslat található.Vázlatrajz és specifikációs táblázat
CB screws are included with the black oxide and black anodized products, and SCB screws are included with the other products.
| Type | Material | Surface Treatment | Accessory | |
| Unequal Dia., Perpendicular Configuration | Unequal Dia., Perpendicular Configuration, Reversed | |||
| KLSTN | KLSTK | EN 1.0038 Equiv. | Black Oxide | Hex Socket Head Cap Screw |
| MLSTN | MLSTK | Electroless Nickel Plating | Hex Socket Head Cap Screw (Stainless Steel) | |
| ALKLN | ALKLK | EN AW-6063 Equiv. | Black Anodize | Hex Socket Head Cap Screw |
| HLKLN | - | Clear Anodize | Hex Socket Head Cap Screw (Stainless Steel) | |
| SLKLN | SLKLK | EN 1.4301 Equiv. | - | |
| D | Included Screw |
| 8 | M4-8/M4-12, 1 pc. each |
| 10 | M5-12/M5-10, 1 pc. each |
| 12 | M5-15, 2 pcs. |
| 15 | M5-20/M5-15, 2 pcs. each |
| 20 | M6-25/M6-20, 2 pcs. each |
| 25 | M6-30/M6-25, 2 pcs. each |
| 30 | M8-35/M8-30, 2 pcs. each |
| 35 | M8-40/M8-35 , 2 pcs. each |
| 40 | M8-45/M8-40, 2 pcs. each |
| 50 | M10-55/M10-45, 2 pcs. each |
Specifications
| Part Number | - | D1 |
| KLSTN20 | - | 15 |
| Part Number | D1H7 | A | B | C | E | F | G | H | K | S1 | S2 | M (Coarse) | d | W | ||||
| Type | DH7 | |||||||||||||||||
| Unequal Dia., Perpendicular Configuration KLSTN MLSTN ALKLN HLKLN SLKLN | Unequal Dia., Perpendicular Configuration, Reversed KLSTK MLSTK ALKLK SLKLK | 8 | +0.015 0 | 6 | +0.012 0 | 37 | 12 | 9 | 13 | 12 | 12 | 8 | 7 | - | - | M4 | 4.5 | 2 |
| 10 | 8 | +0.015 0 | 43 | 16 | 12 | 15 | 14 | 14 | 9 | 8 | - | - | M5 | 5.5 | ||||
| 12 | +0.018 0 | 10 | 47 | 16 | 16 | 16 | 15 | 10 | 9 | - | - | |||||||
| 15 | 51 | 22 | 18 | 18 | 18 | 12 | 11 | 9 | ||||||||||
| 20 | +0.021 0 | 15 | +0.018 0 | 65 | 28 | 22 | 22 | 23 | 20 | 15 | 13 | 14 | 11 | M6 | 6.6 | |||
| 16 | ||||||||||||||||||
| 25 | 15 | 73 | 32 | 25 | 25 | 28 | 18 | 13 | 16 | 14 | ||||||||
| 30 | 20 | +0.021 0 | 85 | 40 | 30 | 29 | 32 | 24 | 21 | 16 | 20 | 15 | M8 | 9 | ||||
| 35 | +0.025 0 | 25 | 98 | 45 | 35 | 32 | 39 | 27 | 24 | 19 | 24 | 20 | ||||||
| KLSTN | KLSTK | 40 | +0.025 0 | 30 | +0.021 0 | 106 | 50 | 40 | 34 | 43 | 29 | 26 | 21 | 25 | 20 | M8 | 9 | 3 |
| 50 | 35 | +0.025 0 | 130 | 65 | 50 | 43 | 52 | 35 | 33 | 25 | 32 | 28 | M10 | 11 | ||||
| D Dimension for SLKLN and SLKLK is available up to 30. D Dimension 8 is not available for ALKLN, ALKLK, HLKLN, SLKLN, or SLKLK. The tolerance and perpendicularity of DH7 and D1H7 are the tolerances before slitting. D1 Dimension 16 is not available for HLKLN and Reversed Type. For mating, g6, f8 shaft tolerances are recommended. Tightening with a long wrench is recommended. | ||||||||||||||||||
Cikkszámlista
Elemek száma
| Cikkszám |
|---|
Egységár (HÉA nélkül)(egységár adóval) | Normál feladási dátum |
|---|
27.03 € ( 32.17 € ) | 16 munkanapok |
24.60 € ( 29.27 € ) | 16 munkanapok |
29.00 € ( 34.51 € ) | 16 munkanapok |
34.47 € ( 41.02 € ) | 16 munkanapok |
41.45 € ( 49.33 € ) | 16 munkanapok |
50.25 € ( 59.80 € ) | 16 munkanapok |
62.71 € ( 74.62 € ) | 16 munkanapok |
77.14 € ( 91.80 € ) | 16 munkanapok |
- ( - ) | 16 munkanapok |
- ( - ) | 16 munkanapok |
- ( - ) | 16 munkanapok |
- ( - ) | 16 munkanapok |
- ( - ) | 16 munkanapok |
- ( - ) | 16 munkanapok |
- ( - ) | 16 munkanapok |
- ( - ) | 16 munkanapok |
Részletes információk
Alapvető információk
Brace clamp used when crossing reducing braces at right angles. [Material] Aluminium alloy, general structural steel, EN 1.4301 Equiv. (sintered).
Vázlat és specifikációk
Example of Use
