Drill Bits（Shank Type：End Mill Shank Page 2）
Search by sub-category
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
- Promotional pricing
Medium Type for General Machining EX-GDN
OSG
Have flute length that comes in middle of stub and regular; capable of non-stop, high-speed machining for up to four times small diameters.- Volume Discount
Configure nowStarting from∗ ： 9.06 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Powder HSS for Tool Steel Stub Type VPH-GDS
OSG
Exhibits High Cost Performance for 40-50 HRC Heat-Treated Steel Processing- Volume Discount
Configure nowStarting from∗ ： 10.37 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
UTDLX UT Micro Coat, Unimax Drill, Long Blade
UNION TOOL
[Features]
· Coated carbide drill for mass-produced parts and prototype parts, balancing performance and cost.
· Adopts a newly developed UT micro-coating that demonstrates high performance for soft materials
· The newly designed drill shape and X-thinning provide improved impact fracture resistance (durability performance) and reduced variation when drilling multiple holes
· The tip angle is set to 130° to suppress the burr height in through holes
· Groove length 15 times larger than the diameter enables highly precise drilling of deep holes.Configure nowStarting from∗ ： 35.95 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
TAF Drill
MITSUBISHI MATERIALS
A blade tip replacement type carbide insert drill.
[Features]
· Economical insert that uses four corners.
· Grade and breaker combination can support a wide range of cut materials.
· High rigidity holder.
[Applications]
· High-efficiency machining for large diameter sizes.Configure nowStarting from∗ ： 299.10 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
VAPDM Violet High Precision Drill (M)
MITSUBISHI MATERIALS
High precision HSS drill (middle type hole depth guideline: 5 times drill diameter or less).
[Features]
· End mill shank drill (high-speed steel) with excellent abrasion resistance and long life.
· Capable of high-efficiency drilling.
· Reduces oversizing of machined holes and provides excellent pitch accuracy.
[Applications]
· High speed, high efficiency machining of steel and cast iron, etc.- Volume Discount
Configure nowStarting from∗ ： 16.45 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
NSMD Micro Drills
NS TOOL
Realizes standardization from tip diameter φ 0.01. Pioneering a New Area for Hole Drilling with Drills- Volume Discount
Configure nowStarting from∗ ： 50.68 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
NSMD-M MUGEN Micro Coating Micro Drill
NS TOOL
With thin film coating dedicated for micro drills, it shows excellent performance when drilling stainless steel, etc.- Volume Discount
Configure nowStarting from∗ ： 65.94 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
MUGEN-COATING Point Drill (for Pilot Hole Machining) MDR-PD
NS TOOL
Drill for pilot hole machining for Infinity miniature drill. Also usable for drilling thin plates- Volume Discount
Configure nowStarting from∗ ： 55.82 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Carbide Drill Carbide for High Hardness Steel (From 70HRC)
OSG
Suitable for processing from 55-70 HRC. Drill for extra hard steel fusing stable processing with a proven cutting edge shape and high-dimensional coating for high hardness steel.- Volume Discount
Configure nowStarting from∗ ： 102.10 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Carbide Drill High Hardness Steel with Oil Hole (From 55HRC)
OSG
Suitable for steel materials and NI-based alloys up to 55 HRC. Achieves Long Life Processing with Oil Hole Specifications- Volume Discount
Configure nowStarting from∗ ： 159.00 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Carbide Solid Tip Straight Shank Drill
FUKUDA
A carbide tip is brazed, is ideal for drilling aluminum alloy, cast iron, etc.Configure nowStarting from∗ ： 288.81 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Sweep Cut Drill Reamer Type 3 mm Shank
ATOM
Sweep Cut Drills drastically reduce the burrs produced with through-holes.
[Features]
· Suppresses hole bending.
· Suppresses runout of the drill bit when biting in, realizing high hole position and hole diameter accuracy.Configure nowStarting from∗ ： 69.72 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Micro Drill "NEO PRO" Short Blades
ATOM
A new series that achieves stable long life machining developed for thin hole machining on steel. A coated drill supporting a wide range of materials from mild steel to high hardness steel (HRC 50).- Volume Discount
Configure nowStarting from∗ ： 35.70 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Micro Drill "NEO PRO" Standard Blade Length
ATOM
A new series that achieves stable long life machining developed for thin hole machining on steel. A coated drill supporting a wide range of materials from mild steel to high hardness steel (HRC 50).- Volume Discount
Configure nowStarting from∗ ： 35.68 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
End Mill Shank Drill 12 X D, with Oil Hole, RT 100 Double Margin 5525
GUHRING
The use of a double margin provides excellent straightness and enables highly accurate deep drilling. Internal lubrication enables high performance drilling without steps.Configure nowStarting from∗ ： 203.69 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Carbide Drill with Step and 90° Chamfering Blade KDD-2
KYOWA SEIKO
Both tip diameter and large diameter have torsional angle of 30°. Lineup of tip diameters from φ0.5 to φ6 in 0.05 increments.- Volume Discount
Configure nowStarting from∗ ： 83.36 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 89.70 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Solid Carbide Drill 2D Type AD-2D
OSG
[Features]
· Carbide 2D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials.
Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life.
Wide flutes for improved chip discharging
Wave-shaped flutes that finely fragment the chips- Volume Discount
Configure nowStarting from∗ ： 37.21 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Solid Carbide Drill 4D Type AD-4D
OSG
[Features]
· Carbide 4D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials.
Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life.
Wide flutes for improved chip discharging
Wave-shaped flutes that finely fragment the chips- Volume Discount
Configure nowStarting from∗ ： 43.71 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Solid Carbide Drill 30D Type With Oil Hole ADO-30D
OSG
[Features]
· Carbide 30D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials.
Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life.
Those drills with oil holes use an internal oil supply system, enabling use in a wide range of applications. They also provide higher speed performance and have a longer service life.
The use of a middle margin improves stability when machining deep holesConfigure nowStarting from∗ ： 156.60 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
TS Coated Carbide Composite Spiral Drill, Stub Model
MISUMI
[Features]
-Designed with a 30° helix angle near the tip and 20° near the shank
-The 20° section has a large core diameter for improved tool durability
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, delivery times, etc.- Volume Discount
Configure nowStarting from∗ ： 96.26 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide Burnishing Bladed Drill, Stub (No Oil Holes), Regular (with Oil Holes)
MISUMI
[Features]
-Providing an edge with smoothing groove on the outer circumference, it is possible to perform hole drilling and hole finishing simultaneously
-Supports a wide range of materials, from general steel to stainless steel
-Internal lubricant supply efficiently removes chips and improves tool life (TAC-HBNESDR)
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
Configure nowStarting from∗ ： 61.06 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide 3-Flute Drill, Stub Model, Regular
MISUMI
3-flute drill with outstanding afferent * If the chip flow is not good, perform the appropriate step process depending on the chip flow condition- Volume Discount
Configure nowStarting from∗ ： 57.87 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide Double Margin Drill, Regular
MISUMI
[Features]
-Providing 4 edges on the outer circumference of the drill improves guiding performance during chamfering and penetration, enabling very straight and stable drilling
-Supports a wide range of materials, from general steel to stainless steel
-The combination of superfine carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.- Volume Discount
Configure nowStarting from∗ ： 78.36 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide Drill, Corrugated Cutting Edge / Stub
MISUMI
[Features]
-The wavy cutting edge achieves excellent sharpness and strength and promotes chip evacuation
-The use of triple rake and R-type thinning achieves high centripetal force
-Designed with larger core diameter than TAC-ESDBA to improve durability
-Can be reground. Please refer to the "Regrinding Service" page for details on how to proceed, what services you can avail of, prices, etc.- Volume Discount
Configure nowStarting from∗ ： 47.71 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide Drill, Corrugated Cutting Edge / Regular
MISUMI
By applying three rake + R thinning, it demonstrates a high level of afferent.- Volume Discount
Configure nowStarting from∗ ： 56.44 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Stub
MISUMI
[Features]
-Capable of high feed and high speed cutting from general steel to stainless steel
-The adoption of a corrugated cutting edge achieves excellent sharpness and strength and promotes chip evacuation
-. High-speed cutting is achieved by maintaining outstanding strength and stability through the adoption of a tapered shape + R-type thinning
-Suppresses chipping through the adoption of a bevel edge treatment on the shoulder
-Through the adoption of a diameter-plus tolerance, it is effective for high-precision hole machining closer to hole tolerance- Volume Discount
Configure nowStarting from∗ ： 42.01 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide High-Speed High-Feed Machining Drill, With Oil Holes / Stub, Regular
MISUMI
[Features]
-Internal lubrication efficiently evacuates chips and improves tool life
-Capable of high feed and high speed cutting from general steel to stainless steel
-Adopting a corrugated cutting edge achieves excellent sharpness and strength, and promotes chip evacuation
-High-speed cutting is achieved by maintaining excellent strength and stability by adopting tapered shape and R-type thinning
-Suppresses chipping by adopting chamfer treatment on the shoulder
-By adopting diameter plus tolerance, it is effective for high-precision finishing of holes closer to hole tolerance- Volume Discount
Configure nowStarting from∗ ： 111.36 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide Drill, Stub
MISUMI
[Features]
-Designed with small core diameter to improve chip evacuation
-The combination of superfine carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.- Volume Discount
Configure nowStarting from∗ ： 25.57 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide Drill, Regular Model with Oil Holes
MISUMI
[Features]
-Internal lubrication efficiently evacuates chips and improves tool life
-Supports a wide range of materials, from general steel to stainless steel
-Achieves excellent strength by adopting a straight cutting edge
-Demonstrates high centripetal force by using three chip and X-type thinning
-The combination of superfine carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining.- Volume Discount
Configure nowStarting from∗ ： 87.11 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TS Coated Carbide Drill for High-Hardness Steel Machining, With Corner Radius / Stub
MISUMI
[Features]
-Weak helix and large core diameter improve tool rigidity
-Achieves excellent strength by using a straight cutting edge
-Cutting edge chipping is suppressed by corner radius machining, and cracks at the bottom of blind holes in workpieces are also suppressed
-Ideal for machining high hardness steel from HRC40 to 60
-It has a coating with high oxidation resistance and high hardness and achieves long life. Effective in high-speed machining and dry machining as coating properties.- Volume Discount
Configure nowStarting from∗ ： 69.75 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TS Coated Carbide Drill for High-Hardness Steel Machining, Stub Model, Regular
MISUMI
[Features]
-Weak helix angle and high core diameter improve the rigidity of the tool
-Achieves excellent strength by using a straight cutting edge
-Ideal for machining high hardness steels from HRC40 to 60
-It has a coating with high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
Configure nowStarting from∗ ： 58.66 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TS Coated Carbide Drill for High-Hardness Steel Machining, Small Diameter / Stub / Regular
MISUMI
A small radius type of the high-hardness steel series- Volume Discount
Configure nowStarting from∗ ： 43.70 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide Drill for Stainless Steel Machining, Composite Spiral / Regular
MISUMI
[Features]
-MIAutomatic steelI-Original shape ideal for EN 1.4016 Equiv. machining
-Designed with a helix angle of 38° near the tip and 20° near the shank
-The 20° section has a large core diameter for improved tool durability
-Superfine carbide alloy provides excellent abrasion resistance and enables high speed machining
-125° tip angle and combined helix angle improve cutting performance.- Volume Discount
Configure nowStarting from∗ ： 113.09 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Carbide Burnishing Drill, Stepped Model
MISUMI
[Features]
-No complicated estimations required. It is possible to order the part number of the step drill without drawings
.Configure nowMin. Shipping Days ： 8 Days -
TiAlN Coated Carbide Drill for Cast Iron Machining, 3-Flute / Regular
MISUMI
[Features]
-Due to its special shape, it has excellent cutting performance even in non-ferrous metals such as grey cast iron, ductile iron, aluminium alloys, brass and magnesium
-Due to the spiral tip shape of the pointed bit part, drilling without centring is possible
-Wide flute design promotes chip flow.- Volume Discount
Configure nowStarting from∗ ： 72.95 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Powdered High-Speed Steel Drill, End Mill Shank / Regular Model
MISUMI
Sophisticated deep hole drilling that's made possible by well-balanced models that are aimed for the highest standards in high-speed steel- Volume Discount
Configure nowStarting from∗ ： 16.35 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 10.69 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 10.37 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiN Coated HSS Drill for Stainless Steel Machining, End Mill Shank / Stub
MISUMI
· A long-awaited end mill shank type is now available for HSS drills dedicated for stainless steel
· MISUMI's unique thinning enables excellent center biting- Volume Discount
Configure nowStarting from∗ ： 7.67 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiN Coated HSS Drill for Stainless Steel Machining, End Mill Shank / Regular
MISUMI
· A long-awaited end mill shank type is now available for HSS drills dedicated for stainless steel
· MISUMI's unique thinning enables excellent center biting- Volume Discount
Configure nowStarting from∗ ： 8.64 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Carbide Burnishing Drill Bit, Long Shank Type
MISUMI
[Features]
・Ideal for step drilling aluminum.
・Long shank types are now available.Configure nowMin. Shipping Days ： 8 Days -
Carbide Step Drill Bit, With Custom Dimensions / Long Shank Type
MISUMI
[Features]
・Introducing a long shank type with custom pilot diameter / large diameter dimensions to the lineup of customizable step drill bits with helical flutes.Configure nowMin. Shipping Days ： 9 Days -
AG-ESS drill AGESS
NACHI(FUJIKOSHI)
Performs high-speed, high-efficiency machining, from steel and stainless steel, to aluminum.- Volume Discount
Configure nowStarting from∗ ： 14.91 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Aqua Drill 3-Flute AQD3F
NACHI(FUJIKOSHI)
Adopts three blade with excellent cutting balance. Adopt three blade with excellent cutting balance.Configure nowStarting from∗ ： 116.31 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days |
| Hole diameter (drill diameter) D(mm) |
| Groove Length L(mm) |
| work material |
| Tool Material Type |
| Overall Length L(mm) |
| Shank Type |
| Coating Y/N |
| Coating Type |
| With/without Oil Hole |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | OSG | OSG | UNION TOOL | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | NS TOOL | NS TOOL | NS TOOL | OSG | OSG | FUKUDA | ATOM | ATOM | ATOM | GUHRING | KYOWA SEIKO | OSG | OSG | OSG | OSG | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) |
| Product Series | Carbide Drill High Hardness Steel with Oil Hole (From 55HRC) | End Mill Shank Drill 12 X D, with Oil Hole, RT 100 Double Margin 5525 | TiAlN Coated Carbide Burnishing Bladed Drill, Stub (No Oil Holes), Regular (with Oil Holes) | TiAlN Coated Carbide Drill, Corrugated Cutting Edge / Regular | TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Stub | TiAlN Coated Carbide High-Speed High-Feed Machining Drill, With Oil Holes / Stub, Regular | TS Coated Carbide Drill for High-Hardness Steel Machining, With Corner Radius / Stub | TS Coated Carbide Drill for High-Hardness Steel Machining, Stub Model, Regular | TS Coated Carbide Drill for High-Hardness Steel Machining, Small Diameter / Stub / Regular | TiAlN Coated Carbide Drill for Stainless Steel Machining, Composite Spiral / Regular | TiAlN Coated Carbide Drill for Cast Iron Machining, 3-Flute / Regular | TiAlN Coated Powdered High-Speed Steel Drill, End Mill Shank / Regular Model | TiN Coated HSS Drill for Stainless Steel Machining, End Mill Shank / Stub | TiN Coated HSS Drill for Stainless Steel Machining, End Mill Shank / Regular | Carbide Step Drill Bit, With Custom Dimensions / Long Shank Type | ||||||||||||||||||||||||||||||
| Starting from∗ | 9.06 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 10.37 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 35.95 € *Unit price with basic configuration | 299.10 € *Unit price with basic configuration | 16.45 € *Unit price with basic configuration Volume Discount | 50.68 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 65.94 € *Unit price with basic configuration Volume Discount | 55.82 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 102.10 € *Unit price with basic configuration Volume Discount | 159.00 € *Unit price with basic configuration Volume Discount | 288.81 € *Unit price with basic configuration | 69.72 € *Unit price with basic configuration | 35.70 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 35.68 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 203.69 € *Unit price with basic configuration | 83.36 € *Unit price with basic configuration Volume Discount | 89.70 € *Unit price with basic configuration Volume Discount | 37.21 € *Unit price with basic configuration Volume Discount | 43.71 € *Unit price with basic configuration Volume Discount | 156.60 € *Unit price with basic configuration | 96.26 € *Unit price with basic configuration Volume Discount | 61.06 € *Unit price with basic configuration Volume Discount | 57.87 € *Unit price with basic configuration Volume Discount | 78.36 € *Unit price with basic configuration Volume Discount | 47.71 € *Unit price with basic configuration Volume Discount | 56.44 € *Unit price with basic configuration Volume Discount | 42.01 € *Unit price with basic configuration Volume Discount | 111.36 € *Unit price with basic configuration Volume Discount | 25.57 € *Unit price with basic configuration Volume Discount | 87.11 € *Unit price with basic configuration Volume Discount | 69.75 € *Unit price with basic configuration Volume Discount | 58.66 € *Unit price with basic configuration Volume Discount | 43.70 € *Unit price with basic configuration Volume Discount | 113.09 € *Unit price with basic configuration Volume Discount | - | 72.95 € *Unit price with basic configuration Volume Discount | 16.35 € *Unit price with basic configuration Volume Discount | 10.69 € *Unit price with basic configuration Volume Discount | 10.37 € *Unit price with basic configuration Volume Discount | 7.67 € *Unit price with basic configuration Volume Discount | 8.64 € *Unit price with basic configuration Volume Discount | - | - | 14.91 € *Unit price with basic configuration | 116.31 € *Unit price with basic configuration |
| Min. Shipping Days | Same day | Same day | 6 Days | 8 Days | 6 Days | Same day | 6 Days | Same day | 6 Days | 6 Days | 6 Days | 6 Days | Same day | Same day | 8 Days | 6 Days | 6 Days | 5 Days | 5 Days | 6 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 8 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 8 Days | 9 Days | 6 Days | 6 Days |
| Hole diameter (drill diameter) D(mm) | 0.5 ～ 5.1 | 0.5 ～ 19.9 | 0.3 ～ 3 | 12 ～ 55 | 0.5 ～ 31 | 0.01 ～ 0.1 | 0.01 ～ 0.1 | 0.1 ～ 1 | 2 ～ 11.9 | 3.3 ～ 12 | 6 ～ 25 | 0.1 ～ 3 | 0.1 ～ 2.99 | 0.03 ～ 3 | 3 ～ 20 | 0.5 ～ 6 | 3 ～ 18 | 2 ～ 12 | 2 ～ 20 | 3.5 ～ 10 | 3 ～ 12 | 3 ～ 13 | 2 ～ 13 | 1 ～ 11 | 3 ～ 13 | 3 ～ 13 | 3 ～ 8 | 4.2 ～ 7 | 0.3 ～ 6 | 3 ～ 13 | 3 ～ 13 | 3 ～ 13 | 0.8 ～ 3 | 3 ～ 10 | - | 5 ～ 12 | 2 ～ 13 | 2 ～ 13 | 2 ～ 13 | 1 ～ 9.2 | - | - | - | 1.2 ～ 17.7 | 4.21 ～ 12.55 |
| Groove Length L(mm) | 6 ～ 39 | 3 ～ 66 | 4.5 ～ 45 | 29 ～ 185 | 6 ～ 150 | 0.1 ～ 1 | 0.1 ～ 1 | 0.2 ～ 2 | 12 ～ 76 | 32 ～ 96 | 60 ～ 160 | 1.2 ～ 25 | 0.6 ～ 12 | 0.3 ～ 25 | 50 ～ 258 | 2 ～ 25 | 15 ～ 78 | 14 ～ 55 | 20 ～ 101 | 116 ～ 330 | 20 ～ 55 | 20 ～ 71 | 12 ～ 77 | 12 ～ 71 | 20 ～ 60 | 28 ～ 77 | 20 ～ 41 | 24 ～ 53 | 2 ～ 28 | 28 ～ 77 | 20 ～ 60 | 20 ～ 77 | 6 ～ 27 | 28 ～ 61 | - | 44 ～ 71 | 24 ～ 101 | 12 ～ 51 | 24 ～ 101 | 6 ～ 40 | - | - | - | 8 ～ 87 | 22 ～ 51 |
| work material | General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[◎] / Aluminum[○] | General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Cast Iron[◎] / Titanium[◎] | General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Titanium[○] / Copper[○] | General Steel[◎] / Stainless Steel[◎] / Cast Iron[◎] | General Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] | General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | High Hardness Steel[◎] | Quenched and tempered steel[◎] / High Hardness Steel[◎] | Cast Iron[◎] / Aluminum[○] | Aluminum[◎] / Resin[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Aluminum[○] / Resin[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Aluminum[○] / Resin[○] | - | General Steel[○] / Quenched and tempered steel[○] / Aluminum[○] | General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] | General Steel[○] / Quenched and tempered steel[○] / Cast Iron[◎] | General Steel[○] / Quenched and tempered steel[○] / Cast Iron[◎] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | Quenched and tempered steel[○] / High Hardness Steel[◎] | Quenched and tempered steel[○] / High Hardness Steel[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Stainless Steel[◎] | Cast Iron[○] / Aluminum[◎] / Copper[○] | Cast Iron[◎] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel[◎] / Cast Iron[○] |
| Tool Material Type | Cobalt HSS | Powder high-speed steel | Carbide | Carbide | High-speed steel | Carbide | Carbide | Carbide | Carbide | Carbide | - | Carbide | Carbide | Carbide | Carbide | - | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Powder high-speed steel | Cobalt HSS | Cobalt HSS | Powder high-speed steel | Powder high-speed steel | Carbide | Carbide | High-speed steel | Carbide |
| Overall Length L(mm) | 38 ～ 83 | 38 ～ 132 | 38 ～ 80 | 82 ～ 265 | 50 ～ 230 | 40 | 40 | 38 | 42 ～ 120 | 78 ～ 156 | 115 ～ 240 | 38 ～ 50 | 38 | 38 ～ 50 | 90 ～ 310 | 50 ～ 80 | 100 ～ 230 | 62 ～ 102 | 66 ～ 153 | 185 ～ 390 | 50 ～ 115 | 62 ～ 124 | 46 ～ 124 | 45 ～ 118 | 66 ～ 107 | 66 ～ 124 | 62 ～ 79 | 66 ～ 91 | 38 ～ 66 | 66 ～ 124 | 62 ～ 107 | 62 ～ 124 | 47 ～ 67 | 60 ～ 120 | 40 ～ 60 | 82 ～ 118 | 56 ～ 161 | 44 ～ 111 | 56 ～ 161 | 38 ～ 90 | - | - | - | 40 ～ 153 | 66 ～ 110 |
| Shank Type | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank |
| Coating Y/N | Available | Available | Available | N/A | Available | Available | Available | Available | Available | Available | N/A | N/A | Available | Available | Available | N/A | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | N/A | Available | Available | Available | Available | Available | Available | N/A | N/A | Available | Available |
| Coating Type | TiN | Other | Other | - | TiAlN | TiAlN | TiAlN | TiAlN | Other | Other | - | Non-Coated | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | Other | - | Other | Other | Other | Other | - | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | - | - | - | TiAlN | - | TiAlN | TiAlN | TiN | TiN | TiAlN | TiAlN | - | - | Other | Other |
| With/without Oil Hole | N/A | N/A | N/A | Available | N/A | N/A | N/A | - | N/A | Available | N/A | N/A | N/A | N/A | Available | N/A | N/A | N/A | N/A | Available | N/A | Available / N/A | N/A | N/A | N/A | N/A | N/A | Available | N/A | Available | N/A | N/A | N/A | N/A | N/A | N/A | Available / N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Hole diameter (drill diameter) D(mm)
-
0～0.995
- 0
- 0.01
- 0.015
- 0.02
- 0.025
- 0.03
- 0.035
- 0.04
- 0.045
- 0.05
- 0.055
- 0.06
- 0.065
- 0.07
- 0.075
- 0.08
- 0.085
- 0.09
- 0.095
- 0.1
- 0.105
- 0.11
- 0.115
- 0.12
- 0.125
- 0.128
- 0.13
- 0.135
- 0.14
- 0.143
- 0.145
- 0.147
- 0.15
- 0.155
- 0.16
- 0.165
- 0.17
- 0.175
- 0.18
- 0.185
- 0.19
- 0.195
- 0.2
- 0.205
- 0.21
- 0.215
- 0.22
- 0.225
- 0.23
- 0.235
- 0.24
- 0.245
- 0.25
- 0.255
- 0.26
- 0.265
- 0.27
- 0.275
- 0.28
- 0.285
- 0.29
- 0.295
- 0.3
- 0.305
- 0.31
- 0.315
- 0.32
- 0.325
- 0.33
- 0.335
- 0.34
- 0.345
- 0.35
- 0.355
- 0.36
- 0.365
- 0.37
- 0.375
- 0.38
- 0.385
- 0.39
- 0.395
- 0.4
- 0.405
- 0.41
- 0.415
- 0.42
- 0.425
- 0.43
- 0.432
- 0.435
- 0.44
- 0.445
- 0.45
- 0.455
- 0.46
- 0.465
- 0.47
- 0.475
- 0.48
- 0.485
- 0.49
- 0.495
- 0.5
- 0.505
- 0.51
- 0.515
- 0.52
- 0.525
- 0.53
- 0.535
- 0.54
- 0.545
- 0.55
- 0.555
- 0.56
- 0.565
- 0.57
- 0.575
- 0.58
- 0.585
- 0.59
- 0.595
- 0.6
- 0.605
- 0.61
- 0.615
- 0.62
- 0.625
- 0.63
- 0.632
- 0.635
- 0.64
- 0.645
- 0.65
- 0.655
- 0.66
- 0.665
- 0.67
- 0.675
- 0.68
- 0.685
- 0.69
- 0.695
- 0.7
- 0.705
- 0.71
- 0.715
- 0.72
- 0.725
- 0.73
- 0.735
- 0.74
- 0.745
- 0.75
- 0.755
- 0.76
- 0.765
- 0.77
- 0.775
- 0.78
- 0.785
- 0.79
- 0.795
- 0.8
- 0.805
- 0.81
- 0.815
- 0.82
- 0.825
- 0.83
- 0.835
- 0.84
- 0.845
- 0.85
- 0.855
- 0.86
- 0.865
- 0.87
- 0.875
- 0.88
- 0.885
- 0.89
- 0.895
- 0.9
- 0.905
- 0.91
- 0.915
- 0.92
- 0.925
- 0.93
- 0.935
- 0.94
- 0.945
- 0.95
- 0.955
- 0.96
- 0.965
- 0.97
- 0.975
- 0.98
- 0.985
- 0.99
- 0.995
-
1～1.995
- 1
- 1.005
- 1.01
- 1.015
- 1.02
- 1.025
- 1.03
- 1.035
- 1.04
- 1.045
- 1.05
- 1.055
- 1.06
- 1.065
- 1.07
- 1.075
- 1.08
- 1.085
- 1.09
- 1.095
- 1.1
- 1.105
- 1.11
- 1.115
- 1.12
- 1.125
- 1.13
- 1.135
- 1.14
- 1.145
- 1.15
- 1.155
- 1.16
- 1.165
- 1.17
- 1.175
- 1.18
- 1.185
- 1.19
- 1.195
- 1.2
- 1.205
- 1.21
- 1.215
- 1.22
- 1.225
- 1.23
- 1.235
- 1.24
- 1.245
- 1.25
- 1.255
- 1.26
- 1.265
- 1.27
- 1.275
- 1.28
- 1.285
- 1.29
- 1.295
- 1.3
- 1.305
- 1.31
- 1.315
- 1.32
- 1.325
- 1.33
- 1.335
- 1.34
- 1.345
- 1.35
- 1.355
- 1.36
- 1.365
- 1.37
- 1.375
- 1.38
- 1.385
- 1.39
- 1.395
- 1.4
- 1.405
- 1.41
- 1.415
- 1.42
- 1.425
- 1.43
- 1.435
- 1.44
- 1.445
- 1.45
- 1.455
- 1.46
- 1.465
- 1.47
- 1.475
- 1.48
- 1.485
- 1.49
- 1.495
- 1.5
- 1.5X10D
- 1.505
- 1.51
- 1.515
- 1.52
- 1.525
- 1.53
- 1.535
- 1.54
- 1.545
- 1.55
- 1.555
- 1.56
- 1.565
- 1.57
- 1.575
- 1.58
- 1.585
- 1.59
- 1.595
- 1.6
- 1.6×10D
- 1.605
- 1.61
- 1.615
- 1.62
- 1.625
- 1.63
- 1.635
- 1.64
- 1.645
- 1.65
- 1.655
- 1.66
- 1.665
- 1.67
- 1.675
- 1.68
- 1.685
- 1.69
- 1.695
- 1.7
- 1.705
- 1.71
- 1.715
- 1.72
- 1.725
- 1.73
- 1.735
- 1.74
- 1.745
- 1.75
- 1.755
- 1.76
- 1.765
- 1.77
- 1.775
- 1.78
- 1.785
- 1.79
- 1.795
- 1.8
- 1.8×10D
- 1.805
- 1.81
- 1.815
- 1.82
- 1.825
- 1.83
- 1.835
- 1.84
- 1.845
- 1.85
- 1.855
- 1.86
- 1.865
- 1.87
- 1.875
- 1.88
- 1.885
- 1.89
- 1.895
- 1.9
- 1.905
- 1.91
- 1.915
- 1.92
- 1.925
- 1.93
- 1.935
- 1.94
- 1.945
- 1.95
- 1.955
- 1.96
- 1.965
- 1.97
- 1.975
- 1.98
- 1.985
- 1.99
- 1.995
-
2～2.99
- 2
- 2×10D
- 2.01
- 2.02
- 2.03
- 2.04
- 2.05
- 2.06
- 2.07
- 2.08
- 2.09
- 2.1
- 2.1×10D
- 2.11
- 2.12
- 2.13
- 2.14
- 2.15
- 2.16
- 2.17
- 2.18
- 2.19
- 2.2
- 2.2×10D
- 2.21
- 2.22
- 2.23
- 2.24
- 2.25
- 2.26
- 2.27
- 2.28
- 2.29
- 2.3
- 2.3×10D
- 2.31
- 2.32
- 2.33
- 2.34
- 2.35
- 2.36
- 2.37
- 2.38
- 2.39
- 2.4
- 2.4×10D
- 2.41
- 2.42
- 2.43
- 2.44
- 2.45
- 2.46
- 2.47
- 2.48
- 2.49
- 2.5
- 2.5×10D
- 2.51
- 2.52
- 2.53
- 2.54
- 2.55
- 2.56
- 2.57
- 2.58
- 2.59
- 2.6
- 2.6×10D
- 2.61
- 2.62
- 2.63
- 2.64
- 2.65
- 2.66
- 2.67
- 2.68
- 2.69
- 2.7
- 2.7×10D
- 2.71
- 2.72
- 2.73
- 2.74
- 2.75
- 2.76
- 2.77
- 2.78
- 2.79
- 2.8
- 2.8×10D
- 2.81
- 2.82
- 2.83
- 2.84
- 2.85
- 2.86
- 2.87
- 2.88
- 2.89
- 2.9
- 2.9×10D
- 2.91
- 2.92
- 2.93
- 2.94
- 2.95
- 2.96
- 2.97
- 2.98
- 2.99
-
3～3.99
- 3
- 3×10D
- 3.01
- 3.02
- 3.03
- 3.04
- 3.05
- 3.06
- 3.07
- 3.08
- 3.09
- 3.1
- 3.1×10D
- 3.11
- 3.12
- 3.13
- 3.14
- 3.15
- 3.16
- 3.17
- 3.18
- 3.19
- 3.2
- 3.2×10D
- 3.21
- 3.22
- 3.23
- 3.24
- 3.25
- 3.26
- 3.27
- 3.28
- 3.29
- 3.3
- 3.3×10D
- 3.31
- 3.32
- 3.33
- 3.34
- 3.35
- 3.35 / 4.50
- 3.36
- 3.37
- 3.38
- 3.39
- 3.4
- 3.40 / 4.60
- 3.4×10D
- 3.41
- 3.42
- 3.43
- 3.44
- 3.45
- 3.46
- 3.47
- 3.48
- 3.49
- 3.5
- 3.5×10D
- 3.51
- 3.52
- 3.53
- 3.54
- 3.55
- 3.56
- 3.57
- 3.58
- 3.59
- 3.6
- 3.6×10D
- 3.61
- 3.62
- 3.63
- 3.64
- 3.65
- 3.66
- 3.67
- 3.68
- 3.69
- 3.7
- 3.70 / 5.00
- 3.7×10D
- 3.71
- 3.72
- 3.73
- 3.74
- 3.75
- 3.76
- 3.77
- 3.78
- 3.79
- 3.8
- 3.8×10D
- 3.81
- 3.82
- 3.83
- 3.84
- 3.85
- 3.86
- 3.87
- 3.88
- 3.89
- 3.9
- 3.9×10D
- 3.91
- 3.92
- 3.93
- 3.94
- 3.95
- 3.96
- 3.97
- 3.98
- 3.99
-
4～4.99
- 4
- 4×10D
- 4.01
- 4.02
- 4.03
- 4.04
- 4.05
- 4.06
- 4.07
- 4.08
- 4.09
- 4.1
- 4.1×10D
- 4.11
- 4.12
- 4.13
- 4.14
- 4.15
- 4.16
- 4.17
- 4.18
- 4.19
- 4.2
- 4.2×10D
- 4.21
- 4.22
- 4.23
- 4.24
- 4.25
- 4.25 / 5.70
- 4.26
- 4.27
- 4.28
- 4.29
- 4.3
- 4.30 / 5.80
- 4.3×10D
- 4.31
- 4.32
- 4.33
- 4.34
- 4.35
- 4.36
- 4.37
- 4.38
- 4.39
- 4.4
- 4.4×10D
- 4.41
- 4.42
- 4.43
- 4.44
- 4.45
- 4.46
- 4.47
- 4.48
- 4.49
- 4.5
- 4.5×10D
- 4.51
- 4.52
- 4.53
- 4.54
- 4.55
- 4.56
- 4.57
- 4.58
- 4.59
- 4.6
- 4.6×10D
- 4.61
- 4.62
- 4.63
- 4.64
- 4.65
- 4.65 / 5.90
- 4.66
- 4.67
- 4.68
- 4.69
- 4.7
- 4.7×10D
- 4.71
- 4.72
- 4.73
- 4.74
- 4.75
- 4.76
- 4.77
- 4.78
- 4.79
- 4.8
- 4.8×10D
- 4.81
- 4.82
- 4.83
- 4.84
- 4.85
- 4.86
- 4.864
- 4.87
- 4.88
- 4.89
- 4.9
- 4.9×10D
- 4.91
- 4.92
- 4.93
- 4.94
- 4.95
- 4.96
- 4.97
- 4.98
- 4.99
-
5～5.99
- 5
- 5.00 / 6.80
- 5×10D
- 5.01
- 5.02
- 5.03
- 5.04
- 5.05
- 5.06
- 5.07
- 5.08
- 5.09
- 5.1
- 5.10 / 6.90
- 5.1×10D
- 5.11
- 5.12
- 5.13
- 5.14
- 5.15
- 5.16
- 5.17
- 5.18
- 5.19
- 5.2
- 5.2×10D
- 5.21
- 5.22
- 5.23
- 5.24
- 5.25
- 5.26
- 5.27
- 5.28
- 5.29
- 5.3
- 5.30 / 7.20
- 5.3×10D
- 5.31
- 5.32
- 5.33
- 5.34
- 5.35
- 5.36
- 5.37
- 5.38
- 5.39
- 5.4
- 5.4×10D
- 5.41
- 5.42
- 5.43
- 5.44
- 5.45
- 5.46
- 5.47
- 5.48
- 5.49
- 5.5
- 5.50 / 7.40
- 5.5×10D
- 5.51
- 5.52
- 5.53
- 5.54
- 5.55
- 5.55 / 7.50
- 5.56
- 5.57
- 5.58
- 5.59
- 5.6
- 5.6×10D
- 5.61
- 5.62
- 5.63
- 5.64
- 5.65
- 5.66
- 5.67
- 5.68
- 5.69
- 5.7
- 5.7×10D
- 5.71
- 5.72
- 5.73
- 5.74
- 5.75
- 5.76
- 5.77
- 5.78
- 5.79
- 5.8
- 5.8×10D
- 5.81
- 5.82
- 5.83
- 5.84
- 5.85
- 5.86
- 5.87
- 5.88
- 5.89
- 5.9
- 5.9×10D
- 5.91
- 5.92
- 5.93
- 5.94
- 5.95
- 5.96
- 5.97
- 5.98
- 5.99
-
6～6.97
- 6
- 6.0～6.4
- 6×10D
- 6.01
- 6.02
- 6.03
- 6.04
- 6.05
- 6.06
- 6.07
- 6.08
- 6.09
- 6.1
- 6.1×10D
- 6.15
- 6.2
- 6.2×10D
- 6.25
- 6.3
- 6.3×10D
- 6.35
- 6.35 (¼")
- 6.37
- 6.375
- 6.4
- 6.4×10D
- 6.45
- 6.5
- 6.5～6.9
- 6.5×10D
- 6.53
- 6.55
- 6.6
- 6.60 / 8.90
- 6.6×10D
- 6.63
- 6.65
- 6.7
- 6.7×10D
- 6.75
- 6.75 / 9.10
- 6.76
- 6.8
- 6.8×10D
- 6.85
- 6.85 / 9.20
- 6.9
- 6.90 / 9.30
- 6.9×10D
- 6.91
- 6.95
- 6.97
-
7～7.98
- 7
- 7.0～7.4
- 7.00 / 9.50
- 7×10D
- 7.01
- 7.02
- 7.03
- 7.04
- 7.05
- 7.06
- 7.07
- 7.08
- 7.09
- 7.1
- 7.1×10D
- 7.14
- 7.15
- 7.2
- 7.2×10D
- 7.25
- 7.25 / 9.80
- 7.3
- 7.30 / 9.80
- 7.3×10D
- 7.34
- 7.35
- 7.36
- 7.37
- 7.38
- 7.4
- 7.40 / 9.80
- 7.4×10D
- 7.45
- 7.49
- 7.5
- 7.5～7.9
- 7.5×10D
- 7.52
- 7.54
- 7.55
- 7.6
- 7.6×10D
- 7.65
- 7.67
- 7.7
- 7.7×10D
- 7.75
- 7.8
- 7.8×10D
- 7.85
- 7.9
- 7.9×10D
- 7.94
- 7.95
- 7.96
- 7.97
- 7.98
-
8～8.96
- 8
- 8.0～8.4
- 8×10D
- 8.00 / 10.80
- 8.01
- 8.02
- 8.03
- 8.04
- 8.05
- 8.06
- 8.07
- 8.08
- 8.09
- 8.1
- 8.1×10D
- 8.15
- 8.2
- 8.2×10D
- 8.25
- 8.3
- 8.3×10D
- 8.33
- 8.35
- 8.4
- 8.4×10D
- 8.43
- 8.45
- 8.5
- 8.5～8.9
- 8.5×10D
- 8.50 / 11.50
- 8.53
- 8.55
- 8.58
- 8.6
- 8.6×10D
- 8.60 / 11.60
- 8.61
- 8.65
- 8.7
- 8.7×10D
- 8.70 / 11.70
- 8.73
- 8.75
- 8.8
- 8.8×10D
- 8.84
- 8.85
- 8.9
- 8.9×10D
- 8.95
- 8.96
-
9～9.97
- 9
- 9.0～9.4
- 9×10D
- 9.00 / 11.80
- 9.01
- 9.02
- 9.03
- 9.04
- 9.05
- 9.06
- 9.07
- 9.08
- 9.09
- 9.1
- 9.1×10D
- 9.13
- 9.15
- 9.2
- 9.2×10D
- 9.21
- 9.24
- 9.25
- 9.26
- 9.3
- 9.3×10D
- 9.30 / 12.60
- 9.34
- 9.35
- 9.36
- 9.38
- 9.4
- 9.4×10D
- 9.45
- 9.5
- 9.5～9.9
- 9.5×10D
- 9.52
- 9.53
- 9.54
- 9.55
- 9.58
- 9.6
- 9.6×10D
- 9.65
- 9.7
- 9.7×10D
- 9.75
- 9.8
- 9.8×10D
- 9.85
- 9.9
- 9.9×10D
- 9.92
- 9.95
- 9.96
- 9.97
-
10～10.96
- 10
- 10-10.4
- 10.0-10.4
- 10×10D
- 10.0～10.4
- 10.00 - 10.49
- 10.01
- 10.02
- 10.03
- 10.04
- 10.05
- 10.06
- 10.07
- 10.08
- 10.09
- 10.1
- 10.1×10D
- 10.15
- 10.2
- 10.2×10D
- 10.25
- 10.25 / 13.80
- 10.26
- 10.3
- 10.3×10D
- 10.30 / 13.80
- 10.32
- 10.35
- 10.4
- 10.4×10D
- 10.40 / 13.80
- 10.45
- 10.49
- 10.5
- 10.5-10.9
- 10.5×10D
- 10.5～10.9
- 10.50 - 10.99
- 10.50 / 13.80
- 10.55
- 10.6
- 10.6×10D
- 10.65
- 10.7
- 10.7×10D
- 10.71
- 10.72
- 10.75
- 10.8
- 10.8×10D
- 10.80 / 14.60
- 10.85
- 10.9
- 10.9×10D
- 10.95
- 10.96
-
11～11.96
- 11
- 11.0-11.4
- 11×10D
- 11.0～11.4
- 11.00 - 11.49
- 11.00 / 14.90
- 11.01
- 11.02
- 11.03
- 11.04
- 11.05
- 11.06
- 11.07
- 11.08
- 11.09
- 11.1
- 11.1×10D
- 11.11
- 11.12
- 11.14
- 11.15
- 11.2
- 11.2×10D
- 11.20 / 15.10
- 11.22
- 11.24
- 11.25
- 11.3
- 11.3×10D
- 11.34
- 11.35
- 11.36
- 11.38
- 11.4
- 11.4×10D
- 11.45
- 11.5
- 11.5-11.9
- 11.5-10.9
- 11.5×10D
- 11.5～11.9
- 11.50 - 11.99
- 11.50 / 15.50
- 11.51
- 11.55
- 11.56
- 11.6
- 11.6×10D
- 11.65
- 11.7
- 11.7×10D
- 11.75
- 11.8
- 11.8×10D
- 11.85
- 11.9
- 11.9×10D
- 11.91
- 11.95
- 11.96
-
12～12.96
- 12
- 12.0-12.4
- 12×10D
- 12.0～12.4
- 12.00 - 12.49
- 12.00 / 15.80
- 12.01
- 12.02
- 12.03
- 12.04
- 12.05
- 12.06
- 12.07
- 12.08
- 12.09
- 12.1
- 12.10 / 16.30
- 12.2
- 12.25
- 12.25 / 16.50
- 12.3
- 12.4
- 12.5
- 12.5-12.9
- 12.5～12.9
- 12.50 - 12.99
- 12.5～14.5
- 12.50 / 16.90
- 12.55
- 12.6
- 12.7
- 12.75
- 12.8
- 12.9
- 12.96
-
13～13.95
- 13
- 13.0-13.4
- 13.0～13.4
- 13.00 - 13.49
- 13.1
- 13.2
- 13.25
- 13.3
- 13.4
- 13.43
- 13.487
- 13.49
- 13.5
- 13.5-13.9
- 13.5 to 13.9
- 13.50 - 13.99
- 13.50 / 17.80
- 13.55
- 13.6
- 13.65
- 13.7
- 13.75
- 13.8
- 13.89
- 13.9
- 13.95
-
14～14.96
- 14
- 14.0-14.4
- 14.0～14.4
- 14.00 - 14.99
- 14~16
- 14.00 / 18.90
- 14.1
- 14.10 / 19.00
- 14.2
- 14.25
- 14.25 / 19.20
- 14.275
- 14.29
- 14.3
- 14.4
- 14.5
- 14.5-14.9
- 14.5～14.9
- 14.50 / 19.60
- 14.55
- 14.6
- 14.68
- 14.69
- 14.7
- 14.75
- 14.8
- 14.9
- 14.95
- 14.96
-
15～15.95
- 15
- 15.0-15.9
- 15.0-15.4
- 15.0～15.9
- 15.00 - 15.99
- 15.0 to 17.0
- 15.08
- 15.1
- 15.10 / 19.80
- 15.2
- 15.25
- 15.3
- 15.4
- 15.48
- 15.5
- 15.5-16.4
- 15.55
- 15.6
- 15.7
- 15.75
- 15.8
- 15.87
- 15.875
- 15.88
- 15.9
- 15.95
-
16～16.9
- 16
- 16.0-16.9
- 16.0～16.9
- 16.00 - 16.99
- 16.08
- 16.1
- 16.13
- 16.2
- 16.25
- 16.27
- 16.3
- 16.4
- 16.5
- 16.5-17.4
- 16.5~19.5
- 16.55
- 16.6
- 16.662
- 16.67
- 16.7
- 16.75
- 16.8
- 16.9
-
17～17.9
- 17
- 17.0-17.9
- 17.0～17.9
- 17.00 - 17.99
- 17.07
- 17.1
- 17.2
- 17.25
- 17.3
- 17.4
- 17.45
- 17.46
- 17.5
- 17.5-18.4
- 17.50 / 19.80
- 17.5～21.5
- 17.55
- 17.6
- 17.7
- 17.75
- 17.8
- 17.86
- 17.9
-
18～18.9
- 18
- 18.0-18.9
- 18.0～18.9
- 18.00 - 18.99
- 18.1
- 18.2
- 18.25
- 18.26
- 18.3
- 18.35
- 18.4
- 18.5
- 18.5-19.4
- 18.6
- 18.6～19.5
- 18.65
- 18.7
- 18.75
- 18.8
- 18.9
-
19～19.95
- 19
- 19.0-19.9
- 19.0～19.9
- 19.00 - 19.99
- 19.05
- 19.1
- 19.2
- 19.25
- 19.3
- 19.4
- 19.45
- 19.5
- 19.5-20.4
- 19.55
- 19.6
- 19.7
- 19.75
- 19.8
- 19.84
- 19.9
- 19.95
-
20～20.9
- 20
- 20.0～20.9
- 20.00 - 20.99
- 20~23.9
- 20.1
- 20.2
- 20.24
- 20.25
- 20.3
- 20.4
- 20.5
- 20.5-21.4
- 20.6
- 20.62
- 20.625
- 20.64
- 20.7
- 20.75
- 20.8
- 20.9
-
21～21.9
- 21
- 21.0～21.9
- 21.00 - 21.99
- 21.03
- 21.1
- 21.2
- 21.25
- 21.3
- 21.4
- 21.43
- 21.5
- 21.5-22.4
- 21.6
- 21.7
- 21.75
- 21.8
- 21.83
- 21.9
-
22～22.9
- 22
- 22.0～22.9
- 22.00 - 22.99
- 22.0～26.0
- 22.1
- 22.2
- 22.22
- 22.225
- 22.23
- 22.25
- 22.3
- 22.4
- 22.5
- 22.5-23.4
- 22.6
- 22.62
- 22.7
- 22.75
- 22.8
- 22.9
-
23～23.9
- 23
- 23.0～23.9
- 23.00 - 23.99
- 23.02
- 23.1
- 23.2
- 23.25
- 23.3
- 23.4
- 23.42
- 23.5
- 23.5-24.4
- 23.6
- 23.7
- 23.75
- 23.79
- 23.8
- 23.81
- 23.9
-
24～24.9
- 24
- 24.0～24.9
- 24.00 - 24.99
- 24.1
- 24.2
- 24.21
- 24.25
- 24.3
- 24.4
- 24.5
- 24.5-25.4
- 24.6
- 24.61
- 24.7
- 24.75
- 24.8
- 24.9
-
25～25.9
- 25
- 25.0～25.9
- 25.00 - 25.99
- 25.1
- 25.2
- 25.25
- 25.3
- 25.4
- 25.5
- 25.5-26.4
- 25.6
- 25.7
- 25.75
- 25.8
- 25.9
-
26～26.99
- 26
- 26.00 - 26.99
- 26.1
- 26.19
- 26.2
- 26.25
- 26.3
- 26.4
- 26.5
- 26.5-27.4
- 26.59
- 26.6
- 26.65
- 26.7
- 26.75
- 26.8
- 26.9
- 26.97
- 26.975
- 26.99
-
27～27.9
- 27
- 27.00 - 27.99
- 27.0～32.0
- 27.1
- 27.2
- 27.3
- 27.4
- 27.5
- 27.5-28.4
- 27.6
- 27.7
- 27.75
- 27.78
- 27.8
- 27.9
-
28～28.9
- 28
- 28.00 - 28.99
- 28.1
- 28.2
- 28.25
- 28.3
- 28.4
- 28.5
- 28.5-29.4
- 28.57
- 28.575
- 28.58
- 28.6
- 28.7
- 28.8
- 28.9
-
29～29.9
- 29
- 29.00 - 29.99
- 29.1
- 29.2
- 29.3
- 29.4
- 29.5
- 29.5-30.4
- 29.56
- 29.6
- 29.65
- 29.7
- 29.8
- 29.9
-
30～30.5
- 30
- 30.00 - 30.99
- 30 ～ 32
- 30.1
- 30.14
- 30.15
- 30.5
-
31～31.75
- 31
- 31.00 - 33.00
- 31.5
- 31.75
-
32～32.5
- 32
- 32.15
- 32.3
- 32.5
-
33～33.5
- 33
- 33.0～41.0
- 33.325
- 33.5
-
34～34.925
- 34
- 34.5
- 34.925
-
35～35.5
- 35
- 35.5
-
36～36.91
- 36
- 36~43
- 36.5
- 36.91
-
37～37.7
- 37
- 37 ～ 40
- 37.5
- 37.7
-
38～38.5
- 38
- 38.1
- 38.5
-
39～39.675
- 39
- 39.5
- 39.67
- 39.675
-
40～40.5
- 40
- 40 ～ 45
- 40.5
-
41～41.5
- 41
- 41.275
- 41.5
-
42～42.85
- 42
- 42.0～54.0
- 42.5
- 42.84
- 42.85
-
43～43.5
- 43
- 43.5
-
44～44.5
- 44
- 44~52
- 44.45
- 44.5
-
45～45.5
- 45
- 45 ～ 50
- 45.5
-
46～46.5
- 46
- 46.5
-
47～47.625
- 47
- 47.5
- 47.625
-
48～48.5
- 48
- 48.5
-
49～49.5
- 49
- 49.5
-
50～50.8
- 50
- 50.5
- 50.8
-
51～51.5
- 51
- 51.5
-
52～52.5
- 52
- 52.5
-
53～53.975
- 53
- 53~63
- 53.5
- 53.975
-
54～54.5
- 54
- 54.5
-
55～55.5
- 55
- 55.2
- 55.5
-
56～56.5
- 56
- 56.5
-
57～57.5
- 57
- 57.15
- 57.5
-
58～58.5
- 58
- 58.5
-
59～59.5
- 59
- 59.5
-
60～60.5
- 60
- 60 ～ 65
- 60.325
- 60.5
-
61～61.5
- 61
- 61.5
-
62～62.5
- 62
- 62.5
-
63～63.5
- 63
- 63.5
-
64～64.5
- 64
- 64.5
-
65～65.5
- 65
- 65.5
-
66～66.5
- 66
- 66.5
-
67～67.5
- 67
- 67.5
-
68～68.5
- 68
- 68.5
-
69～69.5
- 69
- 69.5
-
70～70.5
- 70
- 70.5
-
71～71.5
- 71
- 71.5
-
72～72.5
- 72
- 72.5
-
73～73.5
- 73
- 73.5
-
74～74.5
- 74
- 74.5
-
75
-
76
-
77
-
78
-
79～79.50
- 79
- 79.50
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94～94.50
- 94
- 94.50
-
95～95.50
- 95
- 95.50
-
96
-
97
-
98
-
99
-
100
-
103
-
105
-
110
-
115
-
120
-
-
Groove Length L(mm)
-
0～0.9
- 0
- 0.015
- 0.025
- 0.04
- 0.05
- 0.06
- 0.075
- 0.08
- 0.09
- 0.1
- 0.12
- 0.14
- 0.15
- 0.16
- 0.18
- 0.2
- 0.22
- 0.24
- 0.25
- 0.3
- 0.33
- 0.4
- 0.44
- 0.48
- 0.5
- 0.55
- 0.6
- 0.7
- 0.8
- 0.88
- 0.9
-
1～1.98
- 1
- 1,000
- 1.1
- 1.2
- 1.3
- 1.4
- 1.5
- 1.6
- 1.65
- 1.7
- 1.8
- 1.9
- 1.98
-
2～2.9
- 2
- 2.1
- 2.2
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 2.9
-
3～3.9
- 3
- 3.1
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.8
- 3.9
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.8
- 4.9
-
5～5.8
- 5
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.7
- 5.8
-
6～6.8
- 6
- 6.2
- 6.3
- 6.4
- 6.5
- 6.6
- 6.8
-
7～7.8
- 7
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.8
-
8～8.8
- 8
- 8.2
- 8.3
- 8.4
- 8.5
- 8.6
- 8.8
-
9～9.8
- 9
- 9.2
- 9.3
- 9.4
- 9.5
- 9.6
- 9.8
-
10～10.8
- 10
- 10..1
- 10.2
- 10.4
- 10.5
- 10.6
- 10.8
-
11～11.8
- 11
- 11.1
- 11.2
- 11.3
- 11.4
- 11.5
- 11.6
- 11.7
- 11.8
-
12～12.8
- 12
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.8
-
13～13.8
- 13
- 13.1
- 13.2
- 13.4
- 13.5
- 13.8
-
14～14.9
- 14
- 14.3
- 14.4
- 14.5
- 14.8
- 14.9
-
15～15.8
- 15
- 15.3
- 15.6
- 15.8
-
16～16.8
- 16
- 16.05
- 16.1
- 16.2
- 16.5
- 16.7
- 16.8
-
17～17.8
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.6
- 17.8
-
18～18.9
- 18
- 18.5
- 18.6
- 18.8
- 18.9
-
19～19.8
- 19
- 19.2
- 19.4
- 19.5
- 19.55
- 19.6
- 19.7
- 19.8
-
20～20.7
- 20
- 20.3
- 20.4
- 20.7
-
21～21.8
- 21
- 21.2
- 21.4
- 21.6
- 21.8
-
22～22.8
- 22
- 22.05
- 22.1
- 22.2
- 22.5
- 22.8
-
23～23.9
- 23
- 23.3
- 23.4
- 23.9
-
24～24.8
- 24
- 24.25
- 24.3
- 24.5
- 24.6
- 24.8
-
25～25.8
- 25
- 25.2
- 25.5
- 25.7
- 25.8
-
26～26.6
- 26
- 26.1
- 26.3
- 26.4
- 26.6
-
27～27.8
- 27
- 27.5
- 27.6
- 27.8
-
28～28.8
- 28
- 28.1
- 28.2
- 28.5
- 28.8
-
29～29.4
- 29
- 29.3
- 29.4
-
30～30.8
- 30
- 30.6
- 30.8
-
31～31.7
- 31
- 31.2
- 31.5
- 31.7
-
32～32.5
- 32
- 32.3
- 32.4
- 32.5
-
33～33.8
- 33
- 33.6
- 33.8
-
34～34.8
- 34
- 34.1
- 34.4
- 34.5
- 34.8
-
35～35.5
- 35
- 35.3
- 35.5
-
36～36.8
- 36
- 36.5
- 36.8
-
37～37.5
- 37
- 37.5
-
38～38.3
- 38
- 38.3
-
39～39.8
- 39
- 39.8
-
40～40.5
- 40
- 40.5
-
41～41.3
- 41
- 41.3
-
42～42.8
- 42
- 42.5
- 42.8
-
43～43.5
- 43
- 43.5
-
44～44.3
- 44
- 44.3
-
45
-
46
-
47～47.5
- 47
- 47.5
-
48
-
49
-
50
-
51
-
52～52.5
- 52
- 52.5
-
53
-
54
-
55
-
56
-
57～57.5
- 57
- 57.5
-
58
-
59
-
60
-
61
-
62～62.5
- 62
- 62.5
-
63～63.4
- 63
- 63.4
-
64
-
65～65.5
- 65
- 65.5
-
66
-
67～67.5
- 67
- 67.1
- 67.5
-
68
-
69
-
70
-
71～71.7
- 71
- 71.7
-
72～72.5
- 72
- 72.5
-
73
-
74
-
75
-
76～76.8
- 76
- 76.8
-
77～77.5
- 77
- 77.5
-
78
-
79～79.3
- 79
- 79.3
-
80
-
81～81.4
- 81
- 81.4
-
82～82.5
- 82
- 82.3
- 82.5
-
83
-
84
-
85～85.4
- 85
- 85.4
-
86～86.3
- 86
- 86.3
-
87～87.5
- 87
- 87.5
-
88～88.6
- 88
- 88.6
-
89
-
90～90.1
- 90
- 90.1
-
91
-
92～92.5
- 92
- 92.5
-
93
-
94～94.7
- 94
- 94.7
-
95
-
96
-
97～97.2
- 97
- 97.2
-
98～98.8
- 98
- 98.8
-
99
-
100～100.2
- 100
- 100.2
-
101
-
102
-
103～103.4
- 103
- 103.4
-
104～104.2
- 104
- 104.2
-
105
-
106
-
107
-
108～108.4
- 108
- 108.4
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
-
117
-
118
-
119
-
120
-
121
-
122
-
123
-
124～124.3
- 124
- 124.3
-
125
-
126
-
127
-
128
-
129～129.3
- 129
- 129.3
-
130
-
131
-
132
-
133
-
134
-
135～135.3
- 135
- 135.3
-
136
-
137
-
138
-
140～140.6
- 140
- 140.6
-
141
-
142
-
143
-
144
-
145
-
146
-
147
-
148
-
149
-
150
-
151
-
152
-
153
-
154
-
155
-
156
-
157.2
-
158
-
159
-
160
-
161
-
162～162.2
- 162
- 162.2
-
163
-
164
-
165
-
166
-
167～167.2
- 167
- 167.2
-
168
-
169
-
170
-
171
-
172
-
173
-
174
-
175
-
176
-
177
-
178
-
179
-
180
-
181
-
182
-
183
-
184
-
185
-
186
-
187
-
188
-
189
-
190
-
191
-
192
-
193
-
194
-
195
-
196
-
197
-
198
-
200
-
201
-
202
-
205
-
206
-
207
-
208
-
209
-
210
-
212～212.77
- 212
- 212.77
-
213
-
214
-
215
-
216
-
218
-
219
-
220
-
222
-
223
-
224
-
225
-
226
-
227
-
228
-
230
-
231
-
232
-
234
-
235
-
238
-
239
-
240
-
242
-
243
-
245
-
246
-
247
-
248
-
249.63
-
250
-
252
-
253
-
254
-
255
-
257
-
258
-
260～260.15
- 260
- 260.15
-
262
-
263
-
264
-
265
-
266
-
267
-
270
-
272
-
274
-
275
-
276
-
277
-
278
-
280
-
281～281.77
- 281
- 281.77
-
282
-
285
-
287
-
288
-
290
-
292
-
294
-
295
-
297
-
298
-
300
-
302
-
305
-
308
-
310
-
311
-
314
-
315
-
318
-
320
-
321
-
322
-
323～323.63
- 323
- 323.63
-
325
-
327
-
330
-
336
-
337
-
339.15
-
340
-
343
-
350
-
355
-
360
-
370
-
372
-
385
-
400
-
402
-
432
-
440
-
450
-
460
-
500
-
512
-
550
-
600
-
692
-
700
-
800
-
860
-
1030
-
-
work material
-
Tool Material Type
-
Overall Length L(mm)
-
Shank Type
-
Coating Y/N
- Available
- N/A
-
Coating Type
-
With/without Oil Hole
Brand
-
- OSG (49)
- NACHI(FUJIKOSHI) (27)
- MITSUBISHI MATERIALS (22)
- ATOM (14)
- GUHRING (12)
- IWATA TOOL (11)
- NS TOOL (10)
- DIJET (9)
- KYOWA SEIKO (5)
- 7 LEADERS (4)
- UNION TOOL (4)
- ISCAR (3)
- OKAZAKI SEIKO (3)
- SANDVIK (3)
- OMIKOGYO (2)
- TOYO DRILL (1)
- ASAHI TOOLS (1)
- FUKUDA (1)
- RYOKO SEIKI (1)
- THE CUT (1)
- WIDIA (1)
- HOZAN (0)
- NGK SPARK PLUG (0)
- MAKITA (0)
- ALPEN (0)
- NIKKEN KOSAKUSHO (0)
- KYOCERA (0)
- METABO (0)
- DIXI (0)
- ISHIHASHI (0)
- ESCO (0)
- WIDIN (0)
- TWININGS (0)
- TUNGALOY (0)
- EIKOSHA (0)
CAD data type
-
- 2D
- 3D
Categories related to Drill Bits
-
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
Fizetési mód
Átutalás
Előre fizetés
Igény szerinti gyártás
Tanúsítványok
Copyright © MISUMI Corporation Minden jog fenntartva.