Screw plugs (metric, imperial)

• 

  • KEDVEZMÉNYEZETT
  • Volume Discount

  GANTER

  Threaded plugs

  The gaskets in types AC and AA correspond to the gaskets DIN 7603, type A (flat gaskets).

  További részletek

  Shape	Mounting Hole Shape	Nominal of Thread (M)	Nominal of Thread (R)	Nominal of Thread (G)	Nominal of Thread (NPT/NPTF)	Length(mm)	Material	Surface Treatment
  Flanged	Hex Socket	8 ～ 48	–	1 ～ 3/8	–	8 ～ 16	Steel	–

  Normál ár (ÁFA nélkül):

  0.32 €～

  Normál ár (ÁFA nélkül):

  Speciális ár

  Normál feladási dátum:

  Raktári cikk: 1 munkanap

  Egyes tételeket még aznap fel lehet adni

  Konfigurálás
• 

  • KEDVEZMÉNYEZETT
  • Volume Discount

  GANTER

  Threaded plugs, Steel

  The dimensions of the threaded plugs GN 749 comply with DIN 908, but deviating from the latter is the elastic sealing ring (rubber). This sealling ring is retained in a radial undercut in the mating face which prevents it from dropping out and in particular it does not extrude when the plug is tightened. The details relating to the permissible opreating pressure are non-binding recommended values and rule out any liability. They constitute no general warranty of quality and condition. The user must determine from case to case whether a product is suitable for the intended use.

  További részletek

  CAD:

  2D

  /3D

  Shape	Mounting Hole Shape	Nominal of Thread (M)	Nominal of Thread (R)	Nominal of Thread (G)	Nominal of Thread (NPT/NPTF)	Length(mm)	Material	Surface Treatment
  Flanged	Hex Socket	8 ～ 48	–	1 ～ 3/8	–	–	Steel	–

  Normál ár (ÁFA nélkül):

  1.12 €～

  Normál ár (ÁFA nélkül):

  Speciális ár

  Normál feladási dátum:

  Raktári cikk: 1 munkanap

  Egyes tételeket még aznap fel lehet adni

  Konfigurálás
• 

  • KEDVEZMÉNYEZETT
  • Volume Discount
  • Order quantities extended (D-JIT)

  MISUMI

  Screw Plugs / Standard

  [Features] There are 3 types: without through hole, with through hole and with seat. [Material] -EN 1.1191 Equiv./EN 1.7220 Equiv.

  További részletek

  CAD:

  2D

  /3D

  Shape	Mounting Hole Shape	Nominal of Thread (M)	Nominal of Thread (R)	Nominal of Thread (G)	Nominal of Thread (NPT/NPTF)	Length(mm)	Material	Surface Treatment
  –	–	–	–	–	–	–	–	–

  Normál ár (ÁFA nélkül):

  0.04 €～

  Normál ár (ÁFA nélkül):

  Speciális ár

  Normál feladási dátum:

  Árajánlat

  Konfigurálás
• 

  • Volume Discount

  SUNCO

  Orifice Set

  A nozzle set with a black oxide coating that is compatible with thread diameters M4 to M8 and nozzle diameters ø0.5 to ø2.0.

  További részletek

  Shape	Mounting Hole Shape	Nominal of Thread (M)	Nominal of Thread (R)	Nominal of Thread (G)	Nominal of Thread (NPT/NPTF)	Length(mm)	Material	Surface Treatment
  –	–	–	–	–	–	–	–	–

  Normál ár (ÁFA nélkül):

  1.65 €～

  Normál feladási dátum:

  6 munkanapok

  Konfigurálás
• 

  • Volume Discount

  REYHER

  DIN 7604 Hex. head screw plugs

  Hexagon head screw plugs; Screw plugs; Screws with fine thread

  További részletek

  Shape	Mounting Hole Shape	Nominal of Thread (M)	Nominal of Thread (R)	Nominal of Thread (G)	Nominal of Thread (NPT/NPTF)	Length(mm)	Material	Surface Treatment
  Flanged	–	–	–	–	–	–	Stainless Steel ～ Steel	Nickel Plating ～ Not Provided

  Normál ár (ÁFA nélkül):

  1.08 €～

  Normál feladási dátum:

  3 munkanapok

  Konfigurálás
• 

  FESTO

  Blanking plug, B Series

  [Specifications]・Housing material: Steel・O-ring material: PA, TPE-U(PUR), Stainless steel, NBR[Features]・Aluminium, stainless steel・With sealing ring・Variants recommended for production systems for manufacturing lithium-ion batteries

  További részletek

  Shape	Mounting Hole Shape	Nominal of Thread (M)	Nominal of Thread (R)	Nominal of Thread (G)	Nominal of Thread (NPT/NPTF)	Length(mm)	Material	Surface Treatment
  –	–	–	–	–	–	–	Steel	–

  Normál ár (ÁFA nélkül):

  0.89 €～

  Normál feladási dátum:

  3 munkanapok

  Konfigurálás
• 

  FESTO

  blanking screw, NPQH Series

  [Specifications]・Product type: Plug screw・Housing material: Brass・Surface Treatment: Nickel Plating・Pneumatic connection 1: External thread G1/2, G1/4, G1/8, G3/8, M5・Corrosion resistance class (CRC): 3 - High corrosion stress[Features]・Solid-metal brass, chemically nickel-plated・High corrosion and chemical resistance・Highly resistant to temperatures and pressure

  További részletek

  Shape	Mounting Hole Shape	Nominal of Thread (M)	Nominal of Thread (R)	Nominal of Thread (G)	Nominal of Thread (NPT/NPTF)	Length(mm)	Material	Surface Treatment
  –	–	–	–	–	–	–	Brass	Nickel Plating

  Normál ár (ÁFA nélkül):

  0.95 €～

  Normál feladási dátum:

  3 munkanapok

  Konfigurálás
• 

  KIPP

  Screw plugs with collar and hexagon socket DIN 908 (K1130)

  [Specifications]・Material: Steel・Surface finish body: galvanised・Form: A・D(mm): 12-55・DIN 908[Features]・For plugging parallel internal threads

  További részletek

  CAD:

  2D

  /3D

  Shape	Mounting Hole Shape	Nominal of Thread (M)	Nominal of Thread (R)	Nominal of Thread (G)	Nominal of Thread (NPT/NPTF)	Length(mm)	Material	Surface Treatment
  –	–	–	–	–	–	–	Steel	–

  Normál ár (ÁFA nélkül):

  0.30 €～

  Normál feladási dátum:

  4 munkanapok

  Konfigurálás
• 

  • KEDVEZMÉNYEZETT
  • Volume Discount

  NABEYA BI-TECH

  Hex Socket Screw Plug With Flange_SFM / SFMS

  O-ring included. Since it is a parallel screw, there is no distortion of the female screw side material as when tapered screws are tightened. Appropriate for applications requiring a large amount of mounting/detaching such as with hydraulic equipment, pneumatic equipment, etc.

  További részletek

  CAD:

  2D

  /3D

  Shape	Mounting Hole Shape	Nominal of Thread (M)	Nominal of Thread (R)	Nominal of Thread (G)	Nominal of Thread (NPT/NPTF)	Length(mm)	Material	Surface Treatment
  Flanged	Hex Socket	5 ～ 27	–	–	–	6.5 ～ 16	Steel	Black Oxide ～ Not Provided

  Normál ár (ÁFA nélkül):

  5.87 €～

  Normál ár (ÁFA nélkül):

  Speciális ár

  Normál feladási dátum:

  Raktári cikk: 1 munkanap

  Egyes tételeket még aznap fel lehet adni

  Konfigurálás
• 

  • KEDVEZMÉNYEZETT
  • Volume Discount

  NABEYA BI-TECH

  Hex Socket Head Screwed Plug _SFP【1 – 10 darab】

  Use for compressed spring retention or spring load reduction applications.

  További részletek

  CAD:

  2D

  /3D

  Shape	Mounting Hole Shape	Nominal of Thread (M)	Nominal of Thread (R)	Nominal of Thread (G)	Nominal of Thread (NPT/NPTF)	Length(mm)	Material	Surface Treatment
  Standard	Hex Socket	12 ～ 36	–	–	–	10 ～ 18	Steel	Black Oxide

  Normál ár (ÁFA nélkül):

  3.44 €～

  Normál ár (ÁFA nélkül):

  Speciális ár

  Normál feladási dátum:

  Raktári cikk: 1 munkanap

  Egyes tételeket még aznap fel lehet adni

  Konfigurálás
• 

  • Volume Discount

  SUNCO

  Plastic Hex Socket Head Taper Plug

  Seal by screwing in the female taper pipe screw. At that time the standard diameter is set so that the end is nearly flush with the mounting surface.

  További részletek

  CAD:

  2D

  /3D

  Shape	Mounting Hole Shape	Nominal of Thread (M)	Nominal of Thread (R)	Nominal of Thread (G)	Nominal of Thread (NPT/NPTF)	Length(mm)	Material	Surface Treatment
  Standard	Hex Socket	–	1/4 ～ 3/8	–	–	8 ～ 12	Plastic	Not Provided

  Normál ár (ÁFA nélkül):

  7.13 €～

  Normál feladási dátum:

  6 munkanapok

  Konfigurálás
• 

  • Volume Discount

  REYHER

  DIN 908 Hex. socket screw plug

  Hexagon socket screw plugs; Screw plugs

  További részletek

  Shape	Mounting Hole Shape	Nominal of Thread (M)	Nominal of Thread (R)	Nominal of Thread (G)	Nominal of Thread (NPT/NPTF)	Length(mm)	Material	Surface Treatment
  Flanged	–	–	–	–	–	–	Brass ～ Steel	Nickel Plating ～ Not Provided

  Normál ár (ÁFA nélkül):

  0.42 €～

  Normál feladási dátum:

  3 munkanapok

  Konfigurálás
• 

  • Volume Discount

  NABEYA BI-TECH

  Flange Hex Socket Head Screwed Plug _SPN-L

  Screw plug with high hydraulic specifications. Metric fine thread and pipe parallel thread are standardized.

  További részletek

  CAD:

  2D

  /3D

  Shape	Mounting Hole Shape	Nominal of Thread (M)	Nominal of Thread (R)	Nominal of Thread (G)	Nominal of Thread (NPT/NPTF)	Length(mm)	Material	Surface Treatment
  Flanged	Hex Socket	10 ～ 48	–	1 ～ 3/8	–	8 ～ 16	Steel	Chromate

  Normál ár (ÁFA nélkül):

  4.60 €～

  Normál feladási dátum:

  Raktári cikk: 1 munkanap

  Egyes tételeket még aznap fel lehet adni

  Konfigurálás
• 

  • KEDVEZMÉNYEZETT
  • Volume Discount

  GOSHO WORKS

  Hex Socket Head Taper Plug, GJ Type【1 – 500 darab】

  Taper plug usable in high pressure (high airtightness) conditions developed for reliability.[Features]· The GJ type plug is referred to as a "float type" (JIS type), so when it is screwed into the PT or PS female thread specified in JISB0203, the standard diameter of the taper thread is established near the center of the length (I) so that the large end service is higher than the mounting surface.· Conventionally, a PT plug with a square hole is specified by JIS in place of a hex hole for the GJ type, but recently in order to improve the safety and work efficiency of tightening, hex socket head GJ plugs capable of reliable tightening have come to be used in various quarters.

  További részletek

  Shape	Mounting Hole Shape	Nominal of Thread (M)	Nominal of Thread (R)	Nominal of Thread (G)	Nominal of Thread (NPT/NPTF)	Length(mm)	Material	Surface Treatment
  Standard	Hex Socket	–	1 ～ 3/8	–	–	8 ～ 26	Stainless Steel ～ Steel	Not Provided ～ Tempered Collar

  Normál ár (ÁFA nélkül):

  0.82 €～

  Normál ár (ÁFA nélkül):

  Speciális ár

  Normál feladási dátum:

  Raktári cikk: 1 munkanap

  Egyes tételeket még aznap fel lehet adni

  Konfigurálás
• 

  • Volume Discount

  REYHER

  DIN 906 Hex. socket pipe plugs

  Hexagon socket screw plugs; Screw plugs

  További részletek

  Shape	Mounting Hole Shape	Nominal of Thread (M)	Nominal of Thread (R)	Nominal of Thread (G)	Nominal of Thread (NPT/NPTF)	Length(mm)	Material	Surface Treatment
  Standard	–	–	–	–	–	–	Brass ～ Steel	Nickel Plating ～ Not Provided

  Normál ár (ÁFA nélkül):

  0.27 €～

  Normál feladási dátum:

  3 munkanapok

  Konfigurálás
• 

  • Volume Discount

  SUNCO

  Plug -SH (Square Head)【1 – 100 darab】

  [Material] Steel, stainless steel SUS316L Stainless steel[Surface treatment] Untreated, chromate, bright chromate, black oxide film

  További részletek

  Shape	Mounting Hole Shape	Nominal of Thread (M)	Nominal of Thread (R)	Nominal of Thread (G)	Nominal of Thread (NPT/NPTF)	Length(mm)	Material	Surface Treatment
  Square Head	No Screw Hole	–	1 ～ 3/8	–	–	8 ～ 24	Stainless Steel ～ Steel	Chromate ～ Not Provided

  Normál ár (ÁFA nélkül):

  0.58 €～

  Normál feladási dátum:

  6 munkanapok

  Konfigurálás
• 

  • KEDVEZMÉNYEZETT
  • Volume Discount

  GOSHO WORKS

  GOSHO Plug (GDL)【1 – 1000 darab】

  Shape	Mounting Hole Shape	Nominal of Thread (M)	Nominal of Thread (R)	Nominal of Thread (G)	Nominal of Thread (NPT/NPTF)	Length(mm)	Material	Surface Treatment
  Standard	Hex Socket	–	–	–	1 ～ 3/8	6.35 ～ 16.7	Stainless Steel ～ Steel	Nickel Plating ～ Not Provided

  Normál ár (ÁFA nélkül):

  0.76 €～

  Normál ár (ÁFA nélkül):

  Speciális ár

  Normál feladási dátum:

  Raktári cikk: 1 munkanap

  Egyes tételeket még aznap fel lehet adni

  Konfigurálás
• 

  • Volume Discount

  OHKITA

  Lock Screw Type 1

  A set screw for press dies.Standard type.Can be purchased individually.Material = SCM435 (M3 to M12), S45C (M14 and above)Hardness = HRC 45-53 (M3-M10), HRC 34-44 (M12 or more)Surface processing: Black oxide / temper color

  További részletek

  Shape	Mounting Hole Shape	Nominal of Thread (M)	Nominal of Thread (R)	Nominal of Thread (G)	Nominal of Thread (NPT/NPTF)	Length(mm)	Material	Surface Treatment
  Standard	Hex Socket	3 ～ 68	–	–	–	3 ～ 25	Steel	Black Oxide

  Normál ár (ÁFA nélkül):

  0.30 €～

  Normál feladási dátum:

  Raktári cikk: 1 munkanap

  Egyes tételeket még aznap fel lehet adni

  Konfigurálás
• 

  • Volume Discount

  REYHER

  DIN 3405 Lubricating nipples

  [Specifications]・Shape: Standard・Material: Steel・Surface Treatment: Zinc Plating・Nominal diameter(mm): 6, 8[Features]・Lubricating nipples, cupped type・DIN 3405

  További részletek

  Shape	Mounting Hole Shape	Nominal of Thread (M)	Nominal of Thread (R)	Nominal of Thread (G)	Nominal of Thread (NPT/NPTF)	Length(mm)	Material	Surface Treatment
  Standard	–	–	–	–	–	–	Steel	Nickel Plating

  Normál ár (ÁFA nélkül):

  1.44 €～

  Normál feladási dátum:

  3 munkanapok

  Konfigurálás
• 

  • Volume Discount

  REYHER

  DIN 908 Hex. socket screw plug with fine thread

  Hexagon socket screw plugs; Screw plugs; Screws with fine thread

  További részletek

  Shape	Mounting Hole Shape	Nominal of Thread (M)	Nominal of Thread (R)	Nominal of Thread (G)	Nominal of Thread (NPT/NPTF)	Length(mm)	Material	Surface Treatment
  Flanged	–	–	–	–	–	–	Stainless Steel ～ Steel	Nickel Plating ～ Not Provided

  Normál ár (ÁFA nélkül):

  0.45 €～

  Normál feladási dátum:

  3 munkanapok

  Konfigurálás
• 

  • Volume Discount

  REYHER

  DIN 910 Hex. head screw plugs

  Hexagon head screw plugs; Screw plugs

  További részletek

  Shape	Mounting Hole Shape	Nominal of Thread (M)	Nominal of Thread (R)	Nominal of Thread (G)	Nominal of Thread (NPT/NPTF)	Length(mm)	Material	Surface Treatment
  Flanged	–	–	–	–	–	–	Brass ～ Steel	Nickel Plating ～ Not Provided

  Normál ár (ÁFA nélkül):

  0.78 €～

  Normál feladási dátum:

  3 munkanapok

  Konfigurálás
• 

  KIPP

  Screw plugs with hexagon socket (K1102)

  [Specifications]・Material: Steel・Surface finish body: Bright・D=outside diameter(mm): 15-55[Features]・Operating temperature: -20℃ to+100℃・Operating pressure up to 70 bar

  További részletek

  CAD:

  2D

  /3D

  Shape	Mounting Hole Shape	Nominal of Thread (M)	Nominal of Thread (R)	Nominal of Thread (G)	Nominal of Thread (NPT/NPTF)	Length(mm)	Material	Surface Treatment
  –	–	–	–	–	–	–	Steel	–

  Normál ár (ÁFA nélkül):

  0.98 €～

  Normál feladási dátum:

  4 munkanapok

  Konfigurálás
• 

  • KEDVEZMÉNYEZETT
  • Volume Discount

  SUNCO

  Hex Socket Head Taper Plug (Sink)【1 – 1000 darab】

  Seal by screwing in the female taper pipe screw. At that time the standard diameter is set so that the end is nearly flush with the mounting surface.

  További részletek

  Shape	Mounting Hole Shape	Nominal of Thread (M)	Nominal of Thread (R)	Nominal of Thread (G)	Nominal of Thread (NPT/NPTF)	Length(mm)	Material	Surface Treatment
  Standard	Hex Socket	–	1 ～ 3/8	–	–	6 ～ 22	Stainless Steel ～ Steel	Chromate ～ Not Provided

  Normál ár (ÁFA nélkül):

  0.38 €～

  Normál ár (ÁFA nélkül):

  Speciális ár

  Normál feladási dátum:

  Raktári cikk: 1 munkanap

  Egyes tételeket még aznap fel lehet adni

  Konfigurálás
• 

  • Volume Discount

  SUNCO

  Taper Thread Plug, Sink, NPT (for American Pipes)

  [Shape] Standard[Mount hole shape] Hex hole[Material] Stainless steel[Surface treatment] Untreated plug[Type] Sink plug[Sales unit] Discrete (can be purchased single units) nominal thread designation (NPT/NPTF) 1/16 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2[Length (mm)] 6 7 9 10 12 14

  További részletek

  Shape	Mounting Hole Shape	Nominal of Thread (M)	Nominal of Thread (R)	Nominal of Thread (G)	Nominal of Thread (NPT/NPTF)	Length(mm)	Material	Surface Treatment
  Standard	Hex Socket	–	–	–	1 ～ 3/8	6 ～ 22	Stainless Steel	Not Provided

  Normál ár (ÁFA nélkül):

  6.61 €～

  Normál feladási dátum:

  Raktári cikk: 1 munkanap

  Egyes tételeket még aznap fel lehet adni

  Konfigurálás
• 

  • Volume Discount

  REYHER

  DIN 3404 Lubricating nipples

  Lubrication nipples; Lubrication nipples, button head

  További részletek

  Shape	Mounting Hole Shape	Nominal of Thread (M)	Nominal of Thread (R)	Nominal of Thread (G)	Nominal of Thread (NPT/NPTF)	Length(mm)	Material	Surface Treatment
  Standard	–	–	–	–	–	–	Brass ～ Steel	Nickel Plating ～ Not Provided

  Normál ár (ÁFA nélkül):

  2.30 €～

  Normál feladási dátum:

  3 munkanapok

  Konfigurálás
• 

  • Volume Discount

  REYHER

  DIN 906 Hex. socket pipe plugs with fine thread

  Hexagon socket screw plugs; Screw plugs; Screws with fine thread

  További részletek

  Shape	Mounting Hole Shape	Nominal of Thread (M)	Nominal of Thread (R)	Nominal of Thread (G)	Nominal of Thread (NPT/NPTF)	Length(mm)	Material	Surface Treatment
  Standard	–	–	–	–	–	–	Brass ～ Steel	Nickel Plating ～ Not Provided

  Normál ár (ÁFA nélkül):

  0.27 €～

  Normál feladási dátum:

  3 munkanapok

  Konfigurálás
• 

  KIPP

  Screw plugs hex head with collar DIN 910 (K1131)

  [Specifications]・Material: Steel・Surface finish body: galvanised・Form: A・DIN 910[Features]・Screw plugs with collar and hexagonal head for plugging holes with parallel threads

  További részletek

  CAD:

  2D

  /3D

  Shape	Mounting Hole Shape	Nominal of Thread (M)	Nominal of Thread (R)	Nominal of Thread (G)	Nominal of Thread (NPT/NPTF)	Length(mm)	Material	Surface Treatment
  –	–	–	–	–	–	–	Steel	–

  Normál ár (ÁFA nélkül):

  0.72 €～

  Normál feladási dátum:

  4 munkanapok

  Konfigurálás
• 

  KIPP

  Vent screws, Form B, with air filter (K0457)

  [Specifications]・Main material: Thermoplastic・D=outside diameter(mm): 36-63[Features]・Temperature resistant to 100℃・Removable cap・Easy to clean the air filter

  További részletek

  CAD:

  2D

  /3D

  Shape	Mounting Hole Shape	Nominal of Thread (M)	Nominal of Thread (R)	Nominal of Thread (G)	Nominal of Thread (NPT/NPTF)	Length(mm)	Material	Surface Treatment
  –	–	–	–	–	–	–	–	–

  Normál ár (ÁFA nélkül):

  2.07 €～

  Normál feladási dátum:

  4 munkanapok

  Konfigurálás
• 

  NORELEM

  Screw plugs with hexagon socket DIN 906, tapered thread (28013)

  · For plugging parallel internal threads· Version: steel or stainless steel

  További részletek

  Shape	Mounting Hole Shape	Nominal of Thread (M)	Nominal of Thread (R)	Nominal of Thread (G)	Nominal of Thread (NPT/NPTF)	Length(mm)	Material	Surface Treatment
  –	–	–	–	–	–	8 ～ 20	Stainless Steel ～ Steel	–

  Normál ár (ÁFA nélkül):

  0.23 €～

  Normál feladási dátum:

  4 munkanapok

  Konfigurálás
• 

  • KEDVEZMÉNYEZETT
  • Volume Discount

  NABEYA BI-TECH

  Flange Hex Socket Head Screwed Plug _SPN-H

  Screw plug with high hydraulic specifications. Metric fine thread and pipe parallel thread are standardized.

  További részletek

  CAD:

  2D

  /3D

  Shape	Mounting Hole Shape	Nominal of Thread (M)	Nominal of Thread (R)	Nominal of Thread (G)	Nominal of Thread (NPT/NPTF)	Length(mm)	Material	Surface Treatment
  Flanged	Hex Socket	10 ～ 48	–	1 ～ 3/8	–	8 ～ 16	Steel	Chromate

  Normál ár (ÁFA nélkül):

  6.09 €～

  Normál ár (ÁFA nélkül):

  Speciális ár

  Normál feladási dátum:

  Raktári cikk: 1 munkanap

  Egyes tételeket még aznap fel lehet adni

  Konfigurálás
• 

  • Volume Discount

  OHKITA

  Lock Screw Type 3 Short Type

  A set screw for press dies.Using together with Type 1 achieves a synergistic locking effect.Short type (thin).Can be used when the plate is thin.Can be purchased individually.Material = S45CHardness = HRC 34-44Surface processing: Black oxide

  További részletek

  Shape	Mounting Hole Shape	Nominal of Thread (M)	Nominal of Thread (R)	Nominal of Thread (G)	Nominal of Thread (NPT/NPTF)	Length(mm)	Material	Surface Treatment
  Standard	Hex Socket	8 ～ 33	–	–	–	6 ～ 8	Steel	Black Oxide

  Normál ár (ÁFA nélkül):

  1.26 €～

  Normál feladási dátum:

  Raktári cikk: 1 munkanap

  Egyes tételeket még aznap fel lehet adni

  Konfigurálás
• 

  • Volume Discount

  REYHER

  DIN 909 Hex. head screw plugs

  Hexagon head screw plugs; Screw plugs

  További részletek

  Shape	Mounting Hole Shape	Nominal of Thread (M)	Nominal of Thread (R)	Nominal of Thread (G)	Nominal of Thread (NPT/NPTF)	Length(mm)	Material	Surface Treatment
  Standard	–	–	–	–	–	–	Steel	Not Provided

  Normál ár (ÁFA nélkül):

  1.44 €～

  Normál feladási dátum:

  3 munkanapok

  Konfigurálás
• 

  • KEDVEZMÉNYEZETT
  • Volume Discount

  REYHER

  DIN 910 Hex. head screw plugs with fine thread

  Hexagon head screw plugs; Screw plugs; Screws with fine thread

  További részletek

  Shape	Mounting Hole Shape	Nominal of Thread (M)	Nominal of Thread (R)	Nominal of Thread (G)	Nominal of Thread (NPT/NPTF)	Length(mm)	Material	Surface Treatment
  Flanged	–	–	–	–	–	–	Brass ～ Steel	Nickel Plating ～ Not Provided

  Normál ár (ÁFA nélkül):

  0.93 €～

  Normál ár (ÁFA nélkül):

  Speciális ár

  Normál feladási dátum:

  Raktári cikk: 1 munkanap

  Egyes tételeket még aznap fel lehet adni

  Konfigurálás
• 

  KIPP

  Screw plugs (K0450)

  [Specifications]・Main material: Thermoplastic・Main colour: Black・D=outside diameter(mm): 8.2-35[Features]・Permanent application temperature 100℃・Short-term application temperature 120℃・Fiberglass reinforced・On request: O-ring or higher strength materials

  További részletek

  CAD:

  2D

  /3D

  Shape	Mounting Hole Shape	Nominal of Thread (M)	Nominal of Thread (R)	Nominal of Thread (G)	Nominal of Thread (NPT/NPTF)	Length(mm)	Material	Surface Treatment
  –	–	–	–	–	–	–	–	–

  Normál ár (ÁFA nélkül):

  0.48 €～

  Normál feladási dátum:

  4 munkanapok

  Konfigurálás
• 

  KIPP

  Screw plugs aluminium (K1104)

  [Specifications]・Main material: Aluminum・Surface finish body: Bright・Form: C[Features]・With hex head

  További részletek

  CAD:

  2D

  /3D

  Shape	Mounting Hole Shape	Nominal of Thread (M)	Nominal of Thread (R)	Nominal of Thread (G)	Nominal of Thread (NPT/NPTF)	Length(mm)	Material	Surface Treatment
  –	–	–	–	–	–	–	–	–

  Normál ár (ÁFA nélkül):

  1.41 €～

  Normál feladási dátum:

  4 munkanapok

  Konfigurálás
• 

  KIPP

  Screw plugs with hexagon socket DIN 906 tapered thread (K1129)

  [Specifications]・Material: Steel, Stainless Steel・Surface finish body: Bright, galvanised[Features]・For plugging parallel internal threads・DIN 906

  További részletek

  CAD:

  2D

  /3D

  Shape	Mounting Hole Shape	Nominal of Thread (M)	Nominal of Thread (R)	Nominal of Thread (G)	Nominal of Thread (NPT/NPTF)	Length(mm)	Material	Surface Treatment
  –	–	–	–	–	–	–	Stainless Steel ～ Steel	–

  Normál ár (ÁFA nélkül):

  0.20 €～

  Normál feladási dátum:

  4 munkanapok

  Konfigurálás
• 

  KIPP

  Screw plugs with magnet (K0452)

  [Specifications]・Main material: Thermoplastic・Main colour: Black[Features]・Temperature resistant to 100℃・Mounting close to the ground prevents damage to mechanical components

  További részletek

  CAD:

  2D

  /3D

  Shape	Mounting Hole Shape	Nominal of Thread (M)	Nominal of Thread (R)	Nominal of Thread (G)	Nominal of Thread (NPT/NPTF)	Length(mm)	Material	Surface Treatment
  –	–	–	–	–	–	–	–	–

  Normál ár (ÁFA nélkül):

  1.97 €～

  Normál feladási dátum:

  4 munkanapok

  Konfigurálás
• 

  KIPP

  Vent screws with splash guard (K0458)

  [Specifications]・Main material: Thermoplastic・D1=Thread: G1/2, G1/4, G3/8・D=outside diameter(mm): 30[Features]・Temperature resistant to 100℃・With vent and air filter

  További részletek

  CAD:

  2D

  /3D

  Shape	Mounting Hole Shape	Nominal of Thread (M)	Nominal of Thread (R)	Nominal of Thread (G)	Nominal of Thread (NPT/NPTF)	Length(mm)	Material	Surface Treatment
  –	–	–	–	–	–	–	–	–

  Normál ár (ÁFA nélkül):

  1.68 €～

  Normál feladási dátum:

  4 munkanapok

  Konfigurálás
• 

  NORELEM

  Screw plugs with collar and hexagon socket DIN 908 (28014)

  · For plugging parallel internal threads

  További részletek

  Shape	Mounting Hole Shape	Nominal of Thread (M)	Nominal of Thread (R)	Nominal of Thread (G)	Nominal of Thread (NPT/NPTF)	Length(mm)	Material	Surface Treatment
  –	–	–	–	–	–	8 ～ 16	Steel	–

  Normál ár (ÁFA nélkül):

  0.37 €～

  Normál feladási dátum:

  4 munkanapok

  Konfigurálás
• 

  • KEDVEZMÉNYEZETT
  • Volume Discount

  NABEYA BI-TECH

  Hex Socket Screw Plug With Flange_SFF

  Can be used for high hydraulic pressure applications up to a dynamic pressure of 49 MPa. For increased pressure, improved compactness and safety in hydraulic equipment.

  További részletek

  CAD:

  2D

  /3D

  Shape	Mounting Hole Shape	Nominal of Thread (M)	Nominal of Thread (R)	Nominal of Thread (G)	Nominal of Thread (NPT/NPTF)	Length(mm)	Material	Surface Treatment
  Flanged	Hex Socket	–	–	1 ～ 3/8	–	10 ～ 21	Steel	Black Oxide

  Normál ár (ÁFA nélkül):

  2.99 €～

  Normál ár (ÁFA nélkül):

  Speciális ár

  Normál feladási dátum:

  Raktári cikk: 1 munkanap

  Egyes tételeket még aznap fel lehet adni

  Konfigurálás
• 

  • Volume Discount

  NIPPON CHEMICAL SCREW

  PEEK (Polyetheretherketone) Taper Plug

  [Shape] Standard[Mount hole shape] Hex hole[Material] PEEK[Surface treatment] None nominal thread designation (R) 1/8 1/4 3/8[Length (mm)] 8 11 12

  További részletek

  Shape	Mounting Hole Shape	Nominal of Thread (M)	Nominal of Thread (R)	Nominal of Thread (G)	Nominal of Thread (NPT/NPTF)	Length(mm)	Material	Surface Treatment
  Standard	Hex Socket	–	1/8 ～ 3/8	–	–	8 ～ 12	Plastic	Not Provided

  Normál ár (ÁFA nélkül):

  3.44 €～

  Normál feladási dátum:

  6 munkanapok

  Konfigurálás
• 

  • KEDVEZMÉNYEZETT
  • Volume Discount

  NISSAN SCREW

  Square Head Taper Plug, SH Type

  It is a tapered tap that can be used as a stopcock, etc. for general piping.

  További részletek

  Shape	Mounting Hole Shape	Nominal of Thread (M)	Nominal of Thread (R)	Nominal of Thread (G)	Nominal of Thread (NPT/NPTF)	Length(mm)	Material	Surface Treatment
  Square Head	No Screw Hole	–	1 ～ 3/8	–	–	8 ～ 20	Steel	Barrel, Passivation ～ Not Provided

  Normál ár (ÁFA nélkül):

  0.60 €～

  Normál ár (ÁFA nélkül):

  Speciális ár

  Normál feladási dátum:

  Raktári cikk: 1 munkanap

  Egyes tételeket még aznap fel lehet adni

  Konfigurálás
• 

  • KEDVEZMÉNYEZETT
  • Volume Discount

  NISSAN SCREW

  Hex Socket Head Taper Plug, Sink Type, DB Type

  Requires no sealant, and becomes flush with the female thread member when tightened. For overseas partner products, hydraulic equipment or automobiles.

  További részletek

  Shape	Mounting Hole Shape	Nominal of Thread (M)	Nominal of Thread (R)	Nominal of Thread (G)	Nominal of Thread (NPT/NPTF)	Length(mm)	Material	Surface Treatment
  Standard	Hex Socket	–	–	–	1/2 ～ 3/8	6.35 ～ 13.5	Steel	Black Oxide

  Normál ár (ÁFA nélkül):

  0.82 €～

  Normál ár (ÁFA nélkül):

  Speciális ár

  Normál feladási dátum:

  Raktári cikk: 1 munkanap

  Egyes tételeket még aznap fel lehet adni

  Konfigurálás
• 

  • KEDVEZMÉNYEZETT
  • Volume Discount

  NISSAN SCREW

  Hex Socket Head Taper Plug, Sink Type, B Type【1 – 100 darab】

  The reference diameter position is closer to the upper surface of the plug than the JIS R thread and becomes flush with the female thread member when tightened. For general hydraulic pressure equipment. Hardness 32 to 42HRC product.

  További részletek

  Shape	Mounting Hole Shape	Nominal of Thread (M)	Nominal of Thread (R)	Nominal of Thread (G)	Nominal of Thread (NPT/NPTF)	Length(mm)	Material	Surface Treatment
  Standard	Hex Socket	–	1 ～ 3/8	–	–	6 ～ 16.5	Steel	Black Oxide ～ Chromate

  Normál ár (ÁFA nélkül):

  0.48 €～

  Normál ár (ÁFA nélkül):

  Speciális ár

  Normál feladási dátum:

  Raktári cikk: 1 munkanap

  Egyes tételeket még aznap fel lehet adni

  Konfigurálás
• 

  • KEDVEZMÉNYEZETT
  • Volume Discount

  NISSAN SCREW

  Hex Socket Head Taper Plug, Sink Type, NB Type

  The reference diameter position is closer to the upper surface of the plug than the JIS R thread and becomes flush with the female thread member when tightened. For general hydraulic pressure equipment.

  További részletek

  Shape	Mounting Hole Shape	Nominal of Thread (M)	Nominal of Thread (R)	Nominal of Thread (G)	Nominal of Thread (NPT/NPTF)	Length(mm)	Material	Surface Treatment
  Standard	Hex Socket	–	1 ～ 3/8	–	–	6 ～ 19	Steel	Black Oxide

  Normál ár (ÁFA nélkül):

  0.30 €～

  Normál ár (ÁFA nélkül):

  Speciális ár

  Normál feladási dátum:

  Raktári cikk: 1 munkanap

  Egyes tételeket még aznap fel lehet adni

  Konfigurálás