Adjustable Feet（Properties：Standard Page 2）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Leveling Block NU Type
NABEYA
[Features]
· Compensates for sloped installation surfaces with a spherical receiver plate.
· The spherical part has undergone precision processing with a contact ratio of 65% or higher.
· The spherical receiver plate and top plate are made of ductile cast iron that is hard to damage.
· Lifting amount (adjustment amount) is set to 10 mm, which is the highest in its class.
· Employs a thrust needle bearing and special washer to enable operation with a load of 100kN.- 2D CAD data available
Configure nowStarting from∗ ： 405.84 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Leveling Block, A Model
NABEYA
The standard leveling block.
[Features]
· Features good precision.
· Machinery installation costs are reduced.
· Features the best rigidity.
· Installation is easy.
· Ideal for the installation of milling machines, radial drilling machines, planer machines, surface plates, etc.- 2D CAD data available
Configure nowStarting from∗ ： 126.49 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
- Promotional pricing
Foot Jack FJR Model (Rubber Type)
NABEYA
Since it includes rubber, floors are not damaged and slipping is prevented.
[Features]
· Since it includes rubber, floors are not damaged and slipping is prevented.
· A hex nut is press-fitted to the bottom of the base to enable quick assembly with an impact wrench, etc.
· The rubber has liquid resistance (gasoline, kerosene, acid, alkali) and can be used from -22°C to 100°C.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 9.29 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Adjuster for Anchor Fixing D-E II /D-E II-ST
DAIWARASHI
A standard item adjuster bolt for anchor fixing. Note: Please be advised that the model number in VONA has been changed from "D-E II" to "D-E2."
[Features]
· Similar to D-A, it is structured so that fixing of the receiver and bolt is performed by placing the bolt protrusion into the receiver and pressing a nut into it.
· Can easily be fixed using an anchor bolt.
· Please use an anchor bolt.
· Please use a 12 mm anchor bolt.
· Bolts shorter than 12 × 70 are not recommended for complete fixing due to safety concerns.
· Note: The screw rotates and tilts somewhat.- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 7.12 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Adjuster for Heavy Weights with Rubber D-C-R
DAIWARASHI
A rubber equipped type adjuster for medium loads
[Features]
· Receiver features a chloroprene rubber coating.- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 9.53 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Adjuster for Heavy Weights (Long Screw Type) D-C-L / D-C-L/S
DAIWARASHI
A long screw adjuster with a wide adjustment range
[Features]
· Although the dimensions in the table are in increments of 50 mm, dimensions can be cut as desired upon request.
A limited quantity of 500 mm total length products are available for M16 and M20.
· D-C-LS has a luxurious feel since the surface of the receiver is grind-processed with a lathe.- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 17.04 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Adjuster KC-270
TAKIGEN
Selections are possible from a variety of types based on the application.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 3.22 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Adjuster KC-30-KS
TAKIGEN
The bottom part is made of polyamide and features excellent chemical-resistance.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 3.83 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
SUN Adjusting Nut
SUN FASTENER
[Features]
· The adjusting nut is a nut that includes a leg part. Commercially-available bolts can be installed on machinery to easily mount an adjusting bolt.
· Costs are drastically reduced since commercially-available bolts can be used.
· Since the load of the product is also received by the bolt head part, it can also be used for heavy loads and heavy weights.
· Since re-using (recycling) is easy, it contributes to the effective use of resources.
· Installation of machinery can be performed by temporarily placing and then performing adjustments, enabling accurate positioning to be performed easily.- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 2.75 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Adjuster Pad (Standard Type)
WOOJIN
[Features]
· Since reinforced polyamide is used, it features excellent chemical resistance and oil resistance.- Volume Discount
- 3D CAD data available
Configure nowStarting from∗ ： 3.30 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Level Adjuster (KA)
IMAO CORPORATION
[Features] The stainless steel type has excellent corrosion and water resistance. Approved load: 3 kN, 5 kN.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 4.39 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Level Adjuster (Anchor Type) (KAF)
IMAO CORPORATION
[Features] The stainless steel type has excellent corrosion resistance and water resistance. Approved load: 5 kN.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 8.29 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Adjuster Bolt (500 / 600 kg Type) (with Foot Stop Plate)
TRUSCO NAKAYAMA
· Features an anchor hole for fixing to the floor.
· A hole is provided to the pedestal part and to enable it to be fixed to the floor with an anchor. Used to prevent equipment movement caused by intense vibrations.
· Machine tools, vending machines, conveyors, work benches, control panels, and scientific instruments.- Volume Discount
Configure nowStarting from∗ ： 10.85 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
LV.FO - Levelling elements for ground mounting -Technopolymer base steel or stainless steel stem
ELESA
Levelling elements for fixing to the ground with base in black glass fibre reinforced polyamide-based technopolymer, threaded polished zinc-plated steel or AISI 304 stainless steel articulated stem with adjusting hexagon and option of having it without or with NBR rubber no-slip disk fixed to the base.The fixing is carried out by means of holes, closed by a diaphragm (removable with an awl) to prevent the deposit of unsanitary residues if not used.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 4.16 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Leveling Mount Space Saving Type (Light Duty)
MISUMI
[Features] This product can effectively use space even in the presence of obstacles.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 5.79 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 8.59 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Leveling Foot_FDM / FDF
NABEYA BI-TECH
[Features]
· A leveling foot in which the screw and pad are made of steel.
· FDM: male thread and FDF: female thread.
· The pad can be tilted up to 15°.
· Effective for use on slopes.
· There are products that include a Delrin* cap (FDM-KS/EDE-KS) and products that include a Santoprene** cap (FDM-KR/FDF-KR).
· Material and finish: Screw/pad: SUS22L, trivalent chromate finish.
· Lock nut: S45C, trivalent chromate finish- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 20.60 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Engineering Plastic Leveling Pad (LSA32, LSAR32)
IMAO CORPORATION
- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 7.05 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Engineering Plastic Leveling Pad (LVA70, LVAR70)
IMAO CORPORATION
- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 11.69 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Engineering Plastic Leveling Pad (LVF100, LVFR100)
IMAO CORPORATION
Features an excellent design and the allowable load is guaranteed even in a tilted state. Anchor type.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 28.77 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Engineering Plastic Leveling Pad (Adjustment Knob-Included Type) (LVA70-ELK, LVAR70-ELK)
IMAO CORPORATION
Features an excellent design.
[Features]
· Height adjustments are performed by manually turning a knob.
· Falling off is prevented by a washer on the end surface of the screw part.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 60.01 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Engineering Plastic Leveling Pad (LSA25, LSAR25)
IMAO CORPORATION
- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 6.88 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Engineering Plastic Leveling Pad (LVA100, LVAR100)
IMAO CORPORATION
- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 28.73 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Engineering Plastic Leveling Pad (LVA80, LVAR80)
IMAO CORPORATION
- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 10.07 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Engineering Plastic Leveling Pad (LVF125, LVFR125)
IMAO CORPORATION
Features an excellent design and the allowable load is guaranteed even in a tilted state. Anchor type.
[Features]
· The SUS-made uses SUS304 that is excellent for rust prevention.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 39.96 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Engineering Plastic Leveling Pad (LVF80, LVFR80)
IMAO CORPORATION
Features an excellent design and the allowable load is guaranteed even in a tilted state. Anchor type.
[Features]
· Since stainless steel products have a low sulfide content, they are suitable for applications in which corrosion due to weather is a concern.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 10.08 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Engineering Plastic Leveling Pad (LSA40, LSAR40)
IMAO CORPORATION
- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 7.45 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Engineering Plastic Leveling Pad (LVA125, LVAR125)
IMAO CORPORATION
- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 39.88 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Engineering Plastic Leveling Pad (LVA60, LVAR60)
IMAO CORPORATION
- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 9.38 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Leveling Block G Type
NABEYA
Can be used together with an anchor bolt and is ideal for large machinery and large surface plates.
[Features]
· Features good precision.
· Lowest height is low.
· Can be fixed with an anchor bolt after precise adjustment.
· Ideal for large machinery and large surface plates.
· Convenient for the centering of large workpieces- 2D CAD data available
Configure nowStarting from∗ ： 349.90 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Foot Jack FJ Type (Standard Type)
NABEYA
The most general foot jack. Can be used for various industrial equipment.
[Features]
· A hex nut is press-fitted into the base bottom part and the FJ-S type can be quickly assembled with an impact wrench, etc.
· A Phillips head slot has been provided on the base bottom of the FJ type and assembly can be performed using a screwdriver, etc.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 4.34 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Leveling Block T-Type
NABEYA
Includes a horizontal deviation / vertical deviation preventing mechanism.
[Features]
· The parts are precisely processed to have parallelism, so precise fine adjustments can be made.
· The overall height is made as low as possible to provide outstanding stability.
· The product features a horizontal deviation / vertical deviation mechanism and displacement with regards to dynamic loads is minimal.
· Can also be fixed using an anchor bolt.
· Ideal for five-face machining devices, large grinding machines, various dedicated machinery, large printing machines, measurement machinery, etc.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 300.05 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Leveling Blocks U Model
NABEYA
Compensates for sloped installation surfaces with a spherical receiver plate. Includes a horizontal deviation / vertical deviation preventing mechanism.
[Features]
· Compensates for sloped installation surfaces with a spherical receiver plate.
· The spherical part has undergone precision processing having with contact ratio of 70% or higher, enabling alignment to be performed easily. The displacement value in relation to the load is also very small.
· The product has a horizontal deviation / vertical deviation mechanism, is resistant to dynamic loads, and enables leveling to be performed quickly with a low level of torque.
· The thickness of each part is thick and can withstand abrupt loads.
· Can also be fixed using an anchor bolt.
· Ideal for vertical lathes, grinders, NC machine tools, various special devices, printing machines, etc.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 382.82 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Foot Jack FJC Type (Heavy Load Type)
NABEYA
A type of casting base that can support heavy loads.
[Features]
· A Phillips head slot has been provided on the base bottom and assembly can be performed using a screwdriver, etc.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 11.58 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Leveling Block, BW Type
NABEYA
Ideal for the leveling of heavy objects.
[Features]
· Ductile cast and tough.
· A thrust roller bearing is used for smooth operation.
· BW10 is made of tough cast iron FC300 and a thrust roller bearing is not used.- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 1,309.81 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Leveling Block, UJ Type (for Remote Operation)
NABEYA
[Features]
· Enables remote-controlled leveling by being installed under surface plates and various machinery where it is hard to reach.- 2D CAD data available
Configure nowStarting from∗ ： 310.20 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Leveling Blocks AN Model
NABEYA
No flange. Can be installed in narrow places.
[Features]
· An A type without a flange that can be installed in narrow spaces.
· Convenient for installation on angle bases.
· Its functions, mechanism, and capacity are the same as the A type.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 169.60 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Leveling Block, C Type
NABEYA
A standard leveling block that can be used together with an anchor bolt.
[Features]
· Features good precision.
· Machinery installation costs are reduced.
· Can be fixed with an anchor bolt.
· Features the best rigidity.
· Installation is easy.
· Ideal for the installation of milling machines, radial drilling machines, planer machines, surface plates, etc.- 2D CAD data available
Configure nowStarting from∗ ： 140.62 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Leveling Block, L Type
NABEYA
A lightweight and compact leveling block with a low overall height.
[Features]
· The overall height is low and it is lightweight.
· Nitrile rubber is pasted to the top surface for slip prevention.
· L-2R has nitrile rubber coating on the bottom surface as well.
· The main body is an aluminum forged item and lightweight.- 2D CAD data available
Configure nowStarting from∗ ： 326.89 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Adjuster for Anchor Fixing (Large Pedestal Type) D-E-W
DAIWARASHI
A medium load type adjuster for anchor fixing in which the base is wide and stable
[Features]
· By increasing the size and thickness of the pedestal part, the stability after installation and the resistance horizontal shaking of the anchor fixing part have been improved.
· Note: The screw shaft tilts somewhat- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 20.90 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Adjuster with Rubber for Heavy Weights (Bearing Equipped) D-H-R
DAIWARASHI
An adjuster equipped with rubber for medium loads featuring a built-in thrust bearing.
[Features]
· Since the receiver features a chloroprene rubber coating, there is no need to worry about it falling off, enabling it to be used with confidence.
· Groove processing is applied to the rear surface of the rubber to make it non-slippery.
· Effectively protects floors.- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 71.86 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
- Promotional pricing
Adjuster for Heavy Weights (Bearing Equipped) D-H
DAIWARASHI
An adjuster for heavy weights with a built-in thrust bearing
[Features]
· Suitable for the adjustment of heavy machinery.
· Stability is outstanding since a large diameter bolt is used.
· Smooth adjustments can be made even for non-heavy machinery.- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 43.81 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Standard Receiver Adjuster with Plastic D-A II /D-B II
DAIWARASHI
A standard type adjuster with plastic that does not damage the floor. Note: Please be advised that the model number in VONA has been changed from "D-A II" to "D-A2."
[Features]
· Does not stain or damage floors since a special plastic is molded into the receiver.
· The plastic part has elasticity, feels good to touch, and features excellent aging resistance and temperature resistance.
· Suitable for any machinery or office equipment since the external appearance also features a beautiful finish.- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 7.36 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
- Promotional pricing
Standard Receiver Adjuster, Small Diameter Type D-F / D-F-C
DAIWARASHI
An adjuster whose screw and base have small diameters
[Features]
· Similar to the D-A and D-B types, it is structured so that a nut is pressed into the bolt protrusion inside the receiver, eliminating worries regarding the receiver falling off.
· Manufactured to enable some play between the screw part and receiver, enabling its use on surfaces with a slight slope.
· A light load type with a receiver diameter that is also small.
· Thanks to the plastic coating on the outer circumference of the receiver, floors are not stained or damaged.- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 3.11 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Standard Receiver Adjuster, Space Saving Type D-B50 / D-A60 / D-A65
DAIWARASHI
A standard type adjuster in which the adjuster base is compact
[Features]
· An adjuster whose pedestal part is a compact type.
· The screw rotates and tilts somewhat.
· Since the receiver diameter is designed to be smaller than D-A/D-B, it is useful for saving space.- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 4.81 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days |
| Type |
| Adjusting Bolt Shape Type |
| Swivel Angle θ(deg) |
| Mounting Shape Type |
| Height Adjusting Handle |
| Thread Material |
| Thread Surface Treatment |
| Body Material |
| Main Body Surface Treatment |
| Bottom Rubber Material |
| Thread Length L1(mm) |
| Main Body Height h(mm) |
| Thread Nominal M(mm) |
| Properties |
| Swivel Mechanism |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | NABEYA | NABEYA | NABEYA | DAIWARASHI | DAIWARASHI | DAIWARASHI | TAKIGEN | TAKIGEN | SUN FASTENER | WOOJIN | IMAO CORPORATION | IMAO CORPORATION | TRUSCO NAKAYAMA | ELESA | MISUMI | NANSIN | NABEYA BI-TECH | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI |
| Product Series | Adjuster for Heavy Weights (Long Screw Type) D-C-L / D-C-L/S | LV.FO - Levelling elements for ground mounting -Technopolymer base steel or stainless steel stem | Engineering Plastic Leveling Pad (Adjustment Knob-Included Type) (LVA70-ELK, LVAR70-ELK) | Adjuster with Rubber for Heavy Weights (Bearing Equipped) D-H-R | Standard Receiver Adjuster, Space Saving Type D-B50 / D-A60 / D-A65 | ||||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
| Starting from∗ | 405.84 € *Unit price with basic configuration | 126.49 € *Unit price with basic configuration | 9.29 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 7.12 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 9.53 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 17.04 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 3.22 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 3.83 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 2.75 € *Unit price with basic configuration Volume Discount | 3.30 € *Unit price with basic configuration Volume Discount | 4.39 € *Unit price with basic configuration Volume Discount | 8.29 € *Unit price with basic configuration Volume Discount | 10.85 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 4.16 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 5.79 € *Unit price with basic configuration Volume Discount | 8.59 € *Unit price with basic configuration Volume Discount | 20.60 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 7.05 € *Unit price with basic configuration Volume Discount | 11.69 € *Unit price with basic configuration Volume Discount | 28.77 € *Unit price with basic configuration Volume Discount | 60.01 € *Unit price with basic configuration Volume Discount | 6.88 € *Unit price with basic configuration Volume Discount | 28.73 € *Unit price with basic configuration Volume Discount | 10.07 € *Unit price with basic configuration Volume Discount | 39.96 € *Unit price with basic configuration Volume Discount | 10.08 € *Unit price with basic configuration Volume Discount | 7.45 € *Unit price with basic configuration Volume Discount | 39.88 € *Unit price with basic configuration Volume Discount | 9.38 € *Unit price with basic configuration Volume Discount | 349.90 € *Unit price with basic configuration | 4.34 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 300.05 € *Unit price with basic configuration | 382.82 € *Unit price with basic configuration | 11.58 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 1,309.81 € *Unit price with basic configuration | 310.20 € *Unit price with basic configuration | 169.60 € *Unit price with basic configuration | 140.62 € *Unit price with basic configuration | 326.89 € *Unit price with basic configuration | 20.90 € *Unit price with basic configuration Volume Discount | 71.86 € *Unit price with basic configuration Volume Discount | 43.81 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 7.36 € *Unit price with basic configuration Volume Discount | 3.11 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 4.81 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days | 6 Days | 5 Days | Same day | Same day | Same day | Same day | Same day | Same day | 6 Days | 5 Days | 6 Days | 6 Days | Same day | Same day | 5 Days | 6 Days | Same day | 6 Days | 8 Days | 8 Days | 6 Days | 6 Days | 8 Days | 6 Days | 8 Days | 6 Days | 8 Days | 8 Days | 6 Days | 6 Days | Same day | 5 Days | 6 Days | Same day | 7 Days | 10 Days | 6 Days | 5 Days | 6 Days | 5 Days | 5 Days | Same day | 5 Days | Same day | 5 Days |
| Type | Precision Instrument Type | Precision Instrument Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Others | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Mounting Type / Leg End | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Precision Instrument Type | Adjusting Bolt Type | Precision Instrument Type | Precision Instrument Type | Adjusting Bolt Type | Precision Instrument Type | Precision Instrument Type | Precision Instrument Type | Precision Instrument Type | Precision Instrument Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type | Adjusting Bolt Type |
| Adjusting Bolt Shape Type | - | - | With Rubber Foot | Rubber Foot & Anchor Bolt Fixing Type | With Rubber Foot | Standard | Standard | Standard | - | With Rubber Foot | Standard | Standard | Anchor Bolt Fixing Type | - | - | With Rubber Foot | Standard | Standard / With Rubber Foot | Standard / With Rubber Foot | Anchor Bolt Fixing Type | With Rubber Foot | Standard / With Rubber Foot | Standard / With Rubber Foot | Standard / With Rubber Foot | Anchor Bolt Fixing Type | Anchor Bolt Fixing Type | Standard / With Rubber Foot | Standard / With Rubber Foot | Standard / With Rubber Foot | - | Standard | - | - | Standard | - | - | - | - | - | Rubber Foot & Anchor Bolt Fixing Type | Built-in Bearing | Built-in Bearing | Standard | Standard | Standard |
| Swivel Angle θ(deg) | - | - | - | - | - | - | - | - | - | - | - | - | - | 15 | - | - | 30 | 30 | 30 | 30 | 30 | 30 | 30 | 30 | 4 ～ 30 | 30 | 30 | 16 ～ 30 | 30 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Mounting Shape Type | - | - | - | - | - | - | - | - | - | - | Metal Mount Type | Metal Mount Type | - | Resin Mount Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Height Adjusting Handle | - | - | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | - | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | - | Not Provided | Not Provided | Not Provided | Not Provided | Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | - | Not Provided | - | - | Not Provided | - | - | - | - | - | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided |
| Thread Material | - | - | Stainless Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Steel | - | - | Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | - | Stainless Steel | - | - | Stainless Steel | - | - | - | - | - | Steel | Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Steel |
| Thread Surface Treatment | - | - | Not Provided / Bright Chrome Plating | Trivalent Chromate / Others | Trivalent Chromate / Others | Trivalent Chromate / Others | Zinc Plating | - | - | Zinc Plating | Zinc Plating / Others | Zinc Plating / Others | Not Provided | Not Provided / Zinc Plating | Trivalent Chromate | - | Trivalent Chromate | Zinc Plating | Zinc Plating | Zinc Plating | Zinc Plating | Zinc Plating | Zinc Plating | Zinc Plating | Zinc Plating | Zinc Plating | Zinc Plating | Zinc Plating | Zinc Plating | - | Electrolytic Polishing / Bright Chrome Plating | - | - | Trivalent Chromate | - | - | - | - | - | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate / Others | Trivalent Chromate / Others | Trivalent Chromate / Others | Bright Chrome Plating |
| Body Material | Cast Iron | - | Stainless Steel | Steel | Stainless Steel | Stainless Steel / Cast Iron | Resin | Polyamide | Stainless Steel / Steel | Polyamide | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Polyamide | Steel | Steel | Steel | Polyamide | Polyamide | Polyamide | Polyamide | Polyamide | Polyamide | Polyamide | Polyamide | Polyamide | Polyamide | Polyamide | Polyamide | - | Stainless Steel | - | - | Stainless Steel | Cast Iron | - | - | - | Others | Steel | Steel | Stainless Steel / Steel | Steel | Steel | Steel |
| Main Body Surface Treatment | - | - | Not Provided / Bright Chrome Plating | Trivalent Chromate / Others | Trivalent Chromate / Others | Trivalent Chromate / Others | Not Provided | Not Provided | Bright Chrome Plating / Tumble Polish | Not Provided | Zinc Plating / Others | Zinc Plating / Others | Not Provided | - | Trivalent Chromate | - | Trivalent Chromate | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | - | Electrolytic Polishing / Bright Chrome Plating | - | - | Trivalent Chromate | - | - | - | - | - | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate / Others | Trivalent Chromate / Others | Trivalent Chromate / Others | Bright Chrome Plating |
| Bottom Rubber Material | - | - | - | - | Chloroprene Rubber | - | - | - | - | Others | - | - | - | - | - | Synthetic Rubber | - | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | - | - | - | - | - | - | - | - | - | Nitrile Rubber | - | Chloroprene Rubber | - | ABS Resin | ABS Resin | - |
| Thread Length L1(mm) | - | - | 50 ～ 180 | 50 ～ 200 | 50 ～ 200 | 200 ～ 300 | 24 ～ 30 | 38 | - | 40 | 50 ～ 200 | 50 ～ 200 | 125 ～ 210 | 43 ～ 168 | 50 ～ 180 | 50 ～ 170 | 40 ～ 125 | 43 ～ 168 | 43 ～ 168 | 98 ～ 198 | 78 | 43 ～ 168 | 98 ～ 198 | 43 ～ 198 | 95 ～ 198 | 43 ～ 198 | 43 ～ 168 | 98 ～ 198 | 43 ～ 198 | - | 50 ～ 200 | - | - | 75 ～ 180 | - | - | - | - | - | 130 ～ 150 | 150 | 100 ～ 200 | 75 ～ 200 | 50 ～ 100 | 75 ～ 120 |
| Main Body Height h(mm) | 78 ～ 110 | 66 ～ 101 | 12 ～ 23 | 17 ～ 19 | 22 | 17 ～ 22 | - | 30 | 27 ～ 29 | 63 | 67.5 ～ 231 | 75 ～ 230 | - | 21 ～ 22 | 11 ～ 20 | 20 ～ 25 | 4 ～ 8.5 | 15 | 19 | 24 | 19 | 12 | 24 | 24 | 45 ～ 46 | 24 | 17 | 45 ～ 46 | 24 | 85.5 ～ 112 | 10.5 ～ 20 | 64.5 ～ 121 | 70.5 ～ 101.5 | 17 ～ 21 | 150 ～ 245 | 95 ～ 165 | 80 ～ 101 | 66 ～ 105 | 32.5 ～ 35.5 | 19 | 37 | 29.5 ～ 36.5 | 18 ～ 22 | 12.5 ～ 13.5 | 14 |
| Thread Nominal M(mm) | - | - | 8 ～ 16 | 12 ～ 20 | 12 ～ 20 | 12 ～ 24 | 8 ～ 12 | 12 | 12 ～ 16 | 8 | 8 ～ 20 | 12 ～ 20 | 12 ～ 20 | M8 ～ M16 | 8 ～ 16 | 8 ～ 20 | 8 ～ 16 | 8 ～ 16 | 8 ～ 16 | 20 ～ 24 | 16 | 8 ～ 16 | 20 ～ 24 | 8 ～ 24 | 20 ～ 30 | 8 ～ 24 | 8 ～ 16 | 20 ～ 30 | 8 ～ 24 | - | 8 ～ 20 | - | - | 16 ～ 20 | - | - | - | - | - | 16 | 24 | 20 ～ 30 | 12 ～ 16 | 8 ～ 10 | 12 |
| Properties | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard |
| Swivel Mechanism | - | - | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | - | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided / Provided | Not Provided | - | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | - | Not Provided | - | - | Not Provided | - | - | - | - | - | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Type
- Adjusting Bolt Type
- Mounting Type
- Precision Instrument Type
- With Automatic Height Adjusting Function
- Leg End
- Others
- Adjusting Screw with Rubber Grommet
- Level Adjusting Base
-
Adjusting Bolt Shape Type
-
Swivel Angle θ(deg)
-
Mounting Shape Type
-
Height Adjusting Handle
-
Thread Material
-
Thread Surface Treatment
-
Body Material
-
Main Body Surface Treatment
-
Bottom Rubber Material
-
Thread Length L1(mm)
- 5
- 7
- 9
- 11
- 11.5
- 11.6
- 13.5
- 14
- 15
- 16
- 17
- 17.5
- 18
- 18.5
- 19
- 19.5
- 20
- 21
- 22
- 23
- 24
- 25
- 25.5
- 26
- 26.5
- 27
- 27.5
- 28
- 28.5
- 29
- 29.5
- 30
- 31
- 31.5
- 32
- 33
- 34
- 35
- 36
- 36.5
- 38
- 38.5
- 39.5
- 40
- 41
- 43
- 43.5
- 45
- 45.5
- 47
- 48.5
- 49
- 49.5
- 50
- 51
- 52
- 52.5
- 53
- 54
- 55
- 56
- 58
- 58.5
- 59.5
- 60
- 61
- 62
- 63
- 63.5
- 65
- 65.5
- 66
- 67
- 67.5
- 68
- 68.5
- 69
- 69.5
- 70
- 71
- 72
- 75
- 78
- 79
- 80
- 85
- 90
- 91
- 93.5
- 95
- 95.5
- 97
- 98
- 99
- 99.5
- 100
- 103.5
- 104
- 108
- 110
- 114
- 117.5
- 120
- 122
- 124
- 125
- 126
- 127
- 129
- 130
- 132
- 132.5
- 135.5
- 136
- 138
- 142
- 143.5
- 144
- 145
- 148
- 150
- 154
- 155
- 156
- 157
- 158
- 159
- 160
- 162
- 162.5
- 165.5
- 168
- 170
- 172
- 174
- 175
- 176
- 177
- 179
- 180
- 182
- 182.5
- 184
- 185.5
- 186
- 198
- 200
- 206
- 207
- 209
- 210
- 212
- 212.5
- 215.5
- 220
- 225
- 250
- 280
- 300
[80-300/10mm Unit(s)]
-
Main Body Height h(mm)
- 3
- 3.5
- 4
- 5
- 5.4
- 6
- 7
- 7.5
- 8
- 8.5
- 9
- 9.3
- 9.5
- 9.7
- 9.8
- 10
- 10.5
- 11
- 11.2
- 11.5
- 12
- 12.5
- 13
- 13.5
- 13.7
- 14
- 14.5
- 15
- 15.5
- 16
- 16.5
- 17
- 17.5
- 17.7
- 18
- 18.5
- 19
- 19.5
- 20
- 20.5
- 20.7
- 21
- 21.5
- 22
- 22.5
- 23
- 23.5
- 24
- 24.5
- 25
- 26
- 27
- 27.5
- 28
- 28.2
- 29
- 29.5
- 30
- 30.5
- 31
- 31.5
- 32
- 32.5
- 33
- 33.2
- 34
- 35
- 35-50
- 35.4
- 35.5
- 36
- 36.5
- 37
- 37.5
- 39
- 40
- 41
- 42
- 42.5
- 44
- 44.5
- 45
- 45-65
- 46
- 46.5
- 47
- 48.5
- 50
- 51
- 52
- 53
- 54
- 55
- 55.5
- 56
- 57
- 58
- 58~70
- 60
- 60.5
- 61
- 62
- 63
- 64
- 64.5
- 65
- 65~79
- 65.5
- 66
- 67
- 67.5
- 68
- 69
- 70
- 70.5
- 71
- 72
- 73
- 75
- 76
- 77
- 77.5
- 78
- 78.5
- 79
- 80
- 81
- 82
- 83
- 84
- 85
- 85.5
- 87
- 88
- 89
- 90
- 92
- 93
- 93.5
- 94
- 95
- 97
- 98
- 99
- 100
- 101
- 101.5
- 105
- 106
- 107
- 110
- 112
- 115
- 117.5
- 119
- 121
- 123
- 125
- 127
- 128
- 130
- 131
- 138
- 140
- 142
- 143
- 144
- 145
- 150
- 153
- 154
- 156
- 157
- 158
- 160
- 161
- 165
- 166
- 170
- 171
- 173
- 175
- 177
- 178
- 180
- 181
- 185
- 190
- 207
- 208
- 210
- 211
- 225
- 227
- 228
- 230
- 231
- 245
-
Thread Nominal M(mm)
-
Properties
- Standard
- Corrosion Resistance
- Oil Resistance
- Chemical Resistance
- Heat Resistance
- Vibration Control
- Impact Resistant
- Electrical Conductivity
-
Swivel Mechanism
Brand
-
- NABEYA (22)
- IMAO CORPORATION (19)
- TAKIGEN (14)
- DAIWARASHI (13)
- ELESA (5)
- TRUSCO NAKAYAMA (5)
- WAKISANGYO (4)
- KURASHIKI KAKO (3)
- NABEYA BI-TECH (3)
- OHNISHI MFG (3)
- RICH ENGINEERIN (3)
- GIFU SANKEN KOGYO (2)
- OHNORUBBER (2)
- WOOJIN (2)
- SHIMIZU (2)
- IWATA MFG (1)
- NANSIN (1)
- SUNCO (1)
- SUN FASTENER (1)
- YAHATA NEJI (1)
- ESCO (0)
- TAKIGEN(HAMMER CASTER) (0)
- EUROFLEX (0)
- MAEDLER (0)
- AMF (0)
- HALDER (0)
- GANTER (0)
- KIPP (0)
- NORELEM (0)
CAD data type
-
- 2D
- 3D
Categories related to Adjustable Feet
Fizetési mód
Átutalás
Előre fizetés
Igény szerinti gyártás
Tanúsítványok
Copyright © MISUMI Corporation Minden jog fenntartva.