Rod End Bearings, Spherical Bearings（Page 3）

?* Information on days to ship and prices

• • Promotional pricing ends 31/12/2024

  

  Rod End Bearing, Standard Type, Female Thread (Copper Alloy) [PTLHS]

  STRUENING

  A standard female threaded type rod end bearing. SB is a Taiwanese manufacturer that was established in 1989. Obtained ISO9001: 2000 certification in 2006 and continues to implement world-class quality standards. Sells products to companies all over the world and has a high share of the Asian, European, and North American markets. MISUMI-VONA supplies rod end bearings.

  • Volume Discount

  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.58 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Angled ball joints with rivet ball shank

  GANTER

  Angled ball joints DIN 71802 consist of a ball socket DIN 71805 and a ball shank DIN 71803.
  The angle of rotation for the type with safety catch (Types CS, BS) ist 15°, without safety catch (Types C, B) is 18°.
  For assembly the ball ist pushed through the circlip which acts as a retainer. Should the retaining force (see pull-off force in the table above) between ball and socket not be sufficient, this can be increased by adding a safety catch, which can easily be fitted.
  To protect the angled ball point, a dust cap GN 710 can be added.
  The hexagon nut is part of the angled ball joints.
  Dust caps GN 710 have to be ordered seperately.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	2.30 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  BJT. - Rod ends -Technopolymer

  ELESA

  Rod ends.
  Glass-fibre reinforced polyamide based (PA) special technopolymer.
  BJT. rod ends are remarkably suitable for rotary, oscillating and linear movements even in particularly aggressive environments and when water or humidity, fine dusts, dirt, fabrics and machining residues are present.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.75 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Hydraulic rod ends GF..-DO, with welding face, requiring maintenance, to DIN ISO 12 240-4

  INA

  [Specifications]
  ・I.D. D(mm): 20~80
  ・Allowable Tilt Angle α(deg): 6, 7, 9
  ・Outer Diameter(mm): 50~180
  ・Width(mm): 16~55
  ・DIN ISO 12 240-4

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	38.37 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Hydraulic rod ends GK..-DO, with welding face, requiring maintenance, to DIN ISO 12 240

  INA

  [Specifications]
  ・I.D. D(mm): 17-80
  ・Outer Diameter(mm): 46-180
  ・Product size (length)(mm): 58-231
  ・DIN ISO 12 240

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	31.91 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Radial spherical plain bearings GE..-DO-2RS, requiring maintenance, to DIN ISO 12 240-1, lip seals on both sides

  INA

  [Specifications]
  ・I.D. D(mm): 17~300
  ・Allowable Tilt Angle α(deg): 5~10
  ・Outer Diameter(mm): 30~430
  ・Width(mm) :14~165
  ・DIN ISO 12 240-1

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	16.43 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Radial spherical plain bearings GE..-HO-2RS, requiring maintenance, to DIN ISO 12 240-1, lip seals on both sides

  INA

  [Specifications]
  ・I.D. D(mm): 20~80
  ・Outer Diameter(mm): 35~120
  ・Width(mm): 24~74
  ・DIN ISO 12 240-1

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	28.51 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Rod ends GIR..-DO, with internal thread, requiring maintenance, to DIN ISO 12 240-4, right hand thread

  INA

  [Specifications]
  ・I.D. D(mm): 6-30
  ・Outer Diameter(mm): 21-73
  ・Width(mm): 6-22
  ・DIN ISO 12 240-4
  ・GIR..-DO
  ・Requiring maintenance

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	18.57 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Radial spherical plain bearings B Series

  SKF

  Select to compare

  Configure now
  Starting from∗ ：	48.38 €
  Min. Shipping Days ：	17 Days

  *Unit price with basic configuration

• 

  Rod ends DO Series

  ZEN

  Select to compare

  Configure now
  Starting from∗ ：	5.10 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Rod End Bearings, Spherical Bearings DO Series

  ZEN

  Select to compare

  Configure now
  Starting from∗ ：	9.38 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Radial spherical plain bearings TXE-2LS Series

  SKF

  Select to compare

  Configure now
  Starting from∗ ：	65.22 €
  Min. Shipping Days ：	17 Days

  *Unit price with basic configuration

• 

  ELGES Maintenance-Free Radial Spherical Plain Bearing Hard Chrome / PTFE, Opening, Dimension Series G

  ELGES

  Select to compare

  Configure now
  Starting from∗ ：	37.18 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Ball joints DIN 71802 Form C (K0734)

  KIPP

  [Specifications]
  ・Main Body Material: Steel
  ・Thread M: M5-M16
  ・Standard: DIN 71802
  ・Form: C
  ・Form-Type: without retaining clip
  
  [Features]
  ・Enables transmission and redirection of forces
  ・Application sectors: machine and vehicle construction, material handling
  ・Steel or stainless steel
  ・Version: right or left-hand thread

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.56 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Radial Spherical Plain Bearing, Requiring Maintenance, Steel/Steel Sliding Contact Surface, Inch Size, Open Design

  INA

  Radial spherical plain bearing, requiring maintenance, sliding contact surface: steel/steel, inch size, open design

  Select to compare

  Configure now
  Starting from∗ ：	8.48 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Radial Spherical Plain Bearing, Requiring Maintenance, Steel/Bronze Sliding Contact Surface, Dimension Series K, Open Design

  INA

  Radial spherical plain bearing, requiring maintenance, sliding contact surface: steel/bronze, DIN ISO 12240-1, dimension series K, open design

  Select to compare

  Configure now
  Starting from∗ ：	9.11 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Rod ends with plain bearing external thread, DIN ISO 12240-4 (27627)

  NORELEM

  · Bearing ball, ball-bearing steel, hardened
  
  · Bearing shell with PTFE fabric
  
  · Maintenance-free
  
  · Version: right or left-hand thread

  Select to compare

  Configure now
  Starting from∗ ：	20.44 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Rod ends with plain bearing external thread, stainless steel, DIN ISO 12240-4 (27629)

  NORELEM

  · Bearing ball, hardened
  
  · Plain bearing, maintenance-free
  
  · Version: right or left-hand thread

  Select to compare

  Configure now
  Starting from∗ ：	36.10 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Spherical bearings K/E series DIN ISO 12240-1 (27632)

  NORELEM

  · Suitable for use under high pressure
  
  · Maintenance-free
  
  · Durable
  
  · Low friction

  Select to compare

  Configure now
  Starting from∗ ：	20.70 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Ball joints DIN 71802 Form CS (27650)

  NORELEM

  · Enables transmission and redirection of forces
  
  · Application sectors: machine and vehicle construction, material handling
  
  · Steel or stainless steel
  
  · Version: right or left-hand thread

  Select to compare

  Configure now
  Starting from∗ ：	2.15 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Axial joints similar to DIN 71802 (27665)

  NORELEM

  · For transmitting movement processes
  
  · Application sectors: machine and vehicle construction, material handling
  
  · Temperature range: -30 °C to +110 °C
  
  · Stainless steel version: protected against dust and dirt

  Select to compare

  Configure now
  Starting from∗ ：	6.54 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Rod ends with plain bearing External thread, Steel, DIN ISO 12240-1, maintenance-free (K2079)

  KIPP

  · Bearing ball, ball-bearing steel, hardened
  
  · Bearing shell with PTFE fabric
  
  · Maintenance-free
  
  · Version: right or left-hand thread

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	9.68 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Rod ends with plain bearing External thread, Stainless Steel, DIN ISO 12240-1, maintenance-free (K2081)

  KIPP

  · Bearing ball, hardened
  
  · Plain bearing, maintenance-free
  
  · Version: right or left-hand thread

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	24.13 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Axial joints for tractive forces adjustable, Form C (K1936)

  KIPP

  · For absorption of tractive forces
  
  · The ball's movement can be influenced using the clamping nut.
  
  · Various connection options through internal or external thread

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	27.68 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Axial joints for tractive forces adjustable, Form A (K1936)

  KIPP

  · For absorption of tractive forces
  
  · The ball's movement can be influenced using the clamping nut.
  
  · Various connection options through internal or external thread

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	28.06 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Heavy-Duty Rod Ends GS DIN ISO 12240-4 (DIN 648), Series K, Internal Thread

  MAEDLER

  Material housing: Bores 6-12 mm, free cutting steel, turned, bores 14-30 mm C22 forged, zinc-plated.
  Material outer ring: Special brass CuZn38Al1.
  Material inner ring: Roller bearing steel 100Cr6, hardened HRC 62 ±1, ground and polished.
  Normal bearing clearance: 5 - 50 μ at a measuring load of 100 N.
  Sliding speeds up to 60 m/min. Steel on high-duty brass, thus high radial and axial alternating loads.
  Load tables pages 800 - 801.

  Initial lubrication before use is required!
  IR = Internal-Right hand thread. IL = Internal Left-hand thread.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	15.24 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Spherical Bearings Series K, Stainless Steel, Maintenance-free

  MAEDLER

  Material stainless: Inner ring stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing shell stainless steel1.4571 (AISI 316 Ti), with PTFE-lining.
  • DIN ISO 12240-1 (DIN 648), series K (wide shape).
  • Maintenance-free.
  • Suitable for high dynamic loads.
  • Without additional outer ring.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	22.65 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Spherical Bearings Series E, Steel, Maintenance-free

  MAEDLER

  Material standard: Inner ring bearing steel 100Cr6, hardened, ground, polished and hard chromed. Bearing shell from bearing steel, 100Cr6 with PTFE-lining. From size 35 in 2RS-version (sealed on both sides).
  • DIN ISO 12240-1 (DIN 648), series E (slim shape).
  • Maintenance-free.
  • Suitable for high unidirectional load.
  • Sliding speed up to 10 m/min.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	9.18 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Axial Joints Similar to DIN 71802, Zinc-plated

  MAEDLER

  Material: Steel, zinc-plated.
  With threaded bolt and hexagon nut, ball stud hardened.
  Right-hand thread in the socket and at the stud.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	2.03 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Axial joint lockable, form A (27670)

  NORELEM

  · For absorption of tractive forces
  
  · The ball's movement can be influenced using the clamping nut.
  
  · Various connection options through internal or external thread

  Select to compare

  Configure now
  Starting from∗ ：	33.67 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Spherical Plain Bearing SA1

  THK

  [Structure and Features]
  · The spherical plain bearing is a self-aligning plain bearing designed for heavy loads. The inner and outer rings are made from high-carbon chromium bearing steel that is hardened, ground, phosphate-coated and seized with molybdenum disulfide (MoS2). The SA1 model can bear large radial loads and thrust loads in both directions. Furthermore, as it is highly impact resistant, the spherical plain bearing is most suited for low speed, heavy load rocking components such as the cylinder clevises or hinges of construction and civil engineering machinery, truck suspensions, and train bolster anchors.
  [Types and Features]
  · The SA1 model of the series is popular in Europe. The outer ring is split at one point and is narrower and thinner than the SB model, so it can be used in small spaces. Models with dust seals on both sides (SA1-UU) are also available. These seals are highly effective at keeping out dust.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	11.08 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Rod End Bearing, Right Female Thread, Fluoropolymer Type 2 Piece RBT

  MINEBEA

  The rod end requires no lubrication, and is made of stainless steel (303 for the body, 440C for the ball),
  giving it excellent anti-corrosion characteristics so it can be used in a wide range of general purpose applications.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	19.44 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Rod End Bearing, Right Male Thread, Fluoropolymer Type 3 Piece HRT-E

  MINEBEA

  Comprised of a spherical bearing placed into the rod end body. The main body material is chrome molybdenum steel which has a hardness of HRC35 and tensile strength of 980N/mm2 or more. The 3-piece rod end is widely used in places with extreme performance requirements. The spherical race material can be selected to suit the application.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	43.42 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Rod End Bearing, Standard Type, Oil Free Type, Male Thread (Fluoropolymer PTFE) - [NTLOS]

  STRUENING

  MISUMI-VONA provides carefully chosen products from fast-growing Asian manufacturers to meet our customers' needs. Select a product to suit your applications. A Taiwanese manufacturer established in 1989. Obtained ISO9001: 2000 certification in 2006 and continues to implement world-class quality standards. Sells products to companies all over the world and has a high share of the Asian, European, and North American markets. MISUMI-VONA supplies rod end bearings.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.37 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Pillow Ball, Insert Type PBI Series

  OZAK

  (Features)
  Using a high precision steel bearing as the inner ring, a special copper alloy ring is inserted into the carbon steel holder structure or outer ring, providing smooth and wear-resistant self alignment, rotation and oscillating movement.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	12.45 €
  Min. Shipping Days ：	11 Days

  *Unit price with basic configuration

• 

  TRUSCO Rod End, Oil Free Type, Female Thread【1-2 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · An oil free type rod end with a self-lubricating plastic liner bonded to the surface of the raceway for the ball.
  
  [Applications]
  · Various transport machinery parts
  · Various manufacturing machinery parts
  · FA equipment.
  ·
  Packaging machinery parts·
  Textile machinery parts·
  Agricultural machinery parts· Robot parts.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	17.54 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  TRUSCO Rod End, Lubricated Type, Female Thread【1-2 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · Excellent abrasion and corrosion resistance with superior rigidity
  · Lubricant can be supplied to the sliding surface via a grease nipple on the body.
  
  [Applications]
  · Various transport machinery parts
  · Various manufacturing machinery parts
  · FA equipment.
  ·
  Packaging machinery parts·
  Textile machinery parts·
  Agricultural machinery parts· Robot parts.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	16.26 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  DIN 71802 Ball joint

  REYHER

  [Specifications]
  ・Main Body Material: Steel
  ・Connection screw M: M5-M14
  ・Standard: DIN 71802
  
  [Features]
  ・Angle joints (ball joints) with threaded shank, hexagon nuts and circlips

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	3.14 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Hydraulic rod ends GIHRK..-UK, with thread clamping device, maintenance-free, to DIN ISO 12 240-4, right hand thread, lip seals on both sides

  INA

  [Specifications]
  ・I.D. D(mm): 20~100
  ・Outer Diameter(mm): 56~230
  ・Product size (length)(mm): 78~360
  ・DIN ISO 12 240-4

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	79.95 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Radial spherical plain bearings GE..-FW, maintenance-free, to DIN ISO 12 240-1

  INA

  [Specifications]
  ・I.D. D(mm): 10-25
  ・Allowable Tilt Angle α(deg): 16-19
  ・Outer Diameter(mm): 22-47
  ・Width(mm): 12-28
  ・DIN ISO 12 240-1

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	32.26 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Radial spherical plain bearings GE..-FW-2RS, maintenance-free, to DIN ISO 12 240-1, lip seals on both sides

  INA

  [Specifications]
  ・I.D. D(mm): 30~90
  ・Allowable Tilt Angle α(deg): 15, 16, 17
  ・Outer Diameter(mm): 55~150
  ・Width(mm): 32~85
  ・DIN ISO 12 240-1

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	83.88 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Radial spherical plain bearings GE..-LO, requiring maintenance, to DIN ISO 12 240-1

  INA

  [Specifications]
  ・I.D. D(mm): 12~125
  ・Outer Diameter(mm): 22~180
  ・Width(mm): 12~125
  ・DIN ISO 12 240-1

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	18.57 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Rod ends GAKR..-PW, with external thread, maintenance-free, to DIN ISO 12 240-4, right hand thread

  INA

  [Specifications]
  ・I.D. D(mm): 6~30
  ・Allowable Tilt Angle α(deg): 13~17
  ・Outer Diameter(mm): 20~70
  ・Width(mm): 9~37
  ・Operating Temperature Range(°C): -50:200
  ・DIN ISO 12 240-4

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	16.82 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Rod ends GAKRB..-PD, with external thread, maintenance-free, to DIN ISO 12 240-4, right hand thread

  INA

  [Specifications]
  ・I.D. D(mm): 18, 22
  ・Outer Diameter(mm): 47, 55
  ・Width(mm): 95.5, 111.5
  ・DIN ISO 12 240-4
  ・GAKRB..-PD
  ・Maintenance-free

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	82.85 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Rod ends GIKR..-PB, with internal thread, requiring maintenance, to DIN ISO 12 240-4, right hand thread

  INA

  [Specifications]
  ・I.D. D(mm): 6-30
  ・Outer Diameter(mm): 20-70
  ・Width(mm): 9-37
  ・DIN ISO 12 240-4
  ・GIKR..-PB
  ・Requiring maintenance

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	18.35 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

Loading...