Rubber Seal

?* Information on days to ship and prices

• • Promotional pricing

  

  SKY Packing for Hydraulic Pressure

  SAKAGAMI SEISAKUSHO

  The most popular packing for hydraulic cylinders. Can be used for pistons and rods. Can be installed in single grooves.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	6.66 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  SDR Scraper

  SAKAGAMI SEISAKUSHO

  Prevents dust from entering from the outside to protect packings and bearings. A popular embedded dust seal for cylinders, mainly used in normal indoor atmospheres.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	5.46 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  USH, Piston / Rod Seal Dual Use Packing (Integrated Groove Mounting)

  NOK

  · Usable for both piston seal and rod seal.
  · Designed with a small cross-section to allow integrated groove mounting.
  · This packing is a smaller cross-section version of the UPH type.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	3.36 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Piston Seal, PTFE-bronze, with O-ring NBR, OMK-MR

  FREUDENBERG

  [Specifications]
  ・Material: PTFE-bronze
  ・Outer Diameter(mm): 10~800

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	7.40 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  [Air Pressure Use] PSD Packing

  SAKAGAMI SEISAKUSHO

  Compact double pressure type packing for pistons. Cross-sectional profile designed for better friction properties than O-ring to suppress occurrence of rotation and torsion.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	10.57 €
  	Special price
  Min. Shipping Days ：	11 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  ISI, Rod Seal Dedicated Packing

  NOK

  · Designed with a small cross-section to allow integrated groove mounting.
  ▪ This packing is a smaller cross-section version of the IDI type.
  ▪ U641 with excellent heat resistance is also available.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	3.95 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  UPH, Piston / Rod Seal Dual Use Packing

  NOK

  · Usable for both piston seal and rod seal.
  ▪ Designed with a large cross-section so that it can be used for wide range of applications.
  · Nitrile rubber and fluorine rubber are available, so it can be used in a wide range of temperature conditions.
  ▪ Wide range of sizes are available.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	6.66 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  LBH, Dust Seal (Integrated Groove Mounting)

  NOK

  ▪ This is a seal to prevent dust getting in, in order to protect equipment and maintain the function of packing.
  ▪ Can be mounted to integrated groove.
  · This is a rubber dust seal with double lip to prevent oil spilling.
  ▪ Nitrile rubber and fluorine rubber are available, so it can be used in a wide range of temperature conditions.

  • Volume Discount

  • Stock

  Select to compare

  Configure now
  Starting from∗ ：	5.51 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  PS Penta Seals for Hydraulic Pressure

  SAKAGAMI SEISAKUSHO

  This is a rod-dedicated packing that is compatible with O-rings of the JIS B 2401 P series. This packing has better sealing properties than O-rings. Does not cause twisting or rolling damage.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	4.40 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  SCK Scraper

  SAKAGAMI SEISAKUSHO

  Can also prevent dust from entering from the outside to protect the packing or bearing. Design specifically prevents water intrusion from the groove outer circumference side due to an insertion type dust seal with a large cross-sectional area .
  
  [Features]
  · 13Cr stainless steel mesh is mainly used for primary components, allowing high temperature fluids up to 350°C to be used.
  · Special liquids can be handled by changing the packing, gasket or main part.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	6.58 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  SDB Scraper

  SAKAGAMI SEISAKUSHO

  Prevents dust from entering from the outside to protect packings and bearings. Mainly used to keep outside liquids like cutting fluid out. Rubber-coated at outer ring circumference.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	14.46 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Cup Seal, with Spring, 88NBR101

  FREUDENBERG

  [Specifications]
  ・Type: Cup Seal, with Spring
  ・Material: Nitrile rubber NBR
  ・Material Code: 88 NBR 101
  ・Series: T
  ・Colour: Black
  
  [Features]
  ・Single-acting piston seal for secondary applications and for spare parts requirement

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	29.10 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  [Air Pressure Use] MY Packing

  SAKAGAMI SEISAKUSHO

  Small-diameter U packing for pneumatic applications. The groove of the mini Y packing series is compatible with the O-rings of the JIS B2401-P series.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	4.30 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  [Heavy Load Use] SW Wear Ring

  SAKAGAMI SEISAKUSHO

  A piston bearing made of fiber-reinforced phenolic resin that exhibits excellent load tolerance. Prevent seizing and galling of the piston that can be integrally attached to a groove. This SW wear ring is primarily for use with hydraulic cylinders.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	10.69 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Piston Seal, PTFE-bronze, with O-ring NBR, OMK-E

  FREUDENBERG

  [Specifications]
  ・PTFE Profile Ring material: PTFE-bronze Compound
  ・O-ring material: NBR
  ・Colour: Profile ring: Dark brown
  ・Series: OMK-E
  
  [Features]
  ・Merkel Omegat OMK-E can be used where a sealing piston has pressure on one side, amongst others, in standardised housings according to ISO 7425/1. Rod diameters in agreement with ISO 3320
  ・Very high resistance to pressure and hardness
  ・Good thermal conductivity
  ・Very good protection against extrusion
  ・High resistance to abrasion
  ・Low friction, free of stick-slip

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	7.68 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Wiper-rod Seal, 85AU20991

  FREUDENBERG

  [Specifications]
  ・Material: Polyurethane
  ・Material code: 85 AU 20991
  ・colour: violet
  ・Series: NIPSL 310
  
  [Features]
  ・Combination seal with minimal space requirements, which seals inwards and wipes outwards
  ・The special pneumatic sealing edge gives very good tightness with low friction and maintains an effective lubricating film
  ・Material with high wear resistance

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	11.03 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  [Oil Pressure Use] Back-Up Ring TCS

  SAKAGAMI SEISAKUSHO

  Dedicated standard backup ring for use with SKY, RGY, RNY, (T)SGY, (T)SNY, and HSD. (Maximum operating pressure: approx. 21 MPa)

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.76 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  SCB Scraper

  SAKAGAMI SEISAKUSHO

  Protects packing or bearing by preventing intrusion of external dust. Metal ring baked type equipped by press fit in a groove. Usable under exposure to dust, earth and sand, rain water, etc.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	9.09 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Cup Seal, without Spring, 88NBR101

  FREUDENBERG

  [Specifications]
  ・Type: Cup Seal, without Spring
  ・Material: Nitrile rubber NBR
  ・Material Code: 88 NBR 101
  ・Series: T
  ・Colour: Black
  
  [Features]
  ・Single-acting piston seal for secondary applications and for spare parts requirement

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	18.90 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  U-ring, Rod, 95AU-V142

  FREUDENBERG

  [Specifications]
  ・Material: Polyurethane
  ・Material code: 95 AU V142
  ・Color: Blue
  ・Series: T22 / T20
  ・Hardness in Shore: 95
  
  [Features]
  ・Operating reliably, due to sturdiness of the polyurethane profile ring

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	7.83 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  [Air Pressure Use] PPD Packing

  SAKAGAMI SEISAKUSHO

  Packing designed with a focus on eccentric tracking properties and, balancing durability and friction. For dual pressure-type pistons; groove compatible with PSD packings.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	3.67 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  OSI Piston Seal Packing (Integrated Groove Mounting)

  NOK

  ▪ Designed with a small cross-section, it allows for integrated groove mounting.
  · This packing has a smaller cross-section version of the ODI type.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	5.17 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  [Oil Pressure Use] GNY Packing

  SAKAGAMI SEISAKUSHO

  Dedicated packing for use with rods that employs abrasion-resistant materials. Has higher cross-sectional dimensions relative to diametrical dimensions than SKY packing for increased durability, sealing properties, and eccentricity conformability.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	9.54 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  [Oil Pressure Use] RNY Packing

  SAKAGAMI SEISAKUSHO

  Packing dedicated to piston compatible with the SKY packing. Uses abrasion-resistant materials. Shape is designed to help prevent counterpressure damage.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	7.95 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  [Oil Pressure Use] ST Seal

  SAKAGAMI SEISAKUSHO

  Seal combining an Esflon (PTFE) seal ring and synthetic rubber O-ring. Low-friction design that prevents stick-slip behavior even at low pressure and low speed.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	11.55 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  ST Seals for Low-Friction, Low Hydraulic Pressure, STS Type

  SAKAGAMI SEISAKUSHO

  Seal combining an S-FLON (PTFE) seal ring and a synthetic rubber O-ring. Low friction — does not cause static slip even at low pressure and low speed.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	16.56 €
  Min. Shipping Days ：	11 Days

  *Unit price with basic configuration

• 

  Airzet Rod Seal, 80NBR186349

  FREUDENBERG

  [Specifications]
  ・Material: 80 NBR 186349
  ・Hardness in Shore: 80
  ・Height(mm): 2.3
  
  [Features]
  ・The compact design permits short cylinder cover designs
  ・The rounded sealing profile and the flexible centre part give good tightness with low friction and maintain an effective lubricating film
  ・Widely proven design
  ・Large supply range available
  ・Very good tribological properties (wear, friction and long service life)

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	7.30 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Airzet Rod Seal, 80NBR-B219

  FREUDENBERG

  [Specifications]
  ・Material: 80 NBR 186349
  ・Hardness in Shore: 80
  ・Height(mm): 2.3 / 2.8
  
  [Features]
  ・The compact design permits short cylinder cover designs
  ・The rounded sealing profile and the flexible centre part give good tightness with low friction and maintain an effective lubricating film
  ・Widely proven design
  ・Large supply range available
  ・Very good tribological properties (wear, friction and long service life)

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	7.30 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Chevron Seal Set, Rod, Closed, NBR

  FREUDENBERG

  [Specifications]
  ・Material: BI-NBR B3B246
  ・Series: ES
  ・Type: Closed
  
  [Features]
  ・Field-proven under ul tra-tough conditions
  ・Long useful lifetime
  ・Can be optimally matched to the application concerned
  ・Functions for a certain period even on poor surfaces
  ・Depending on the application and design involved, fluctuations in the leakage and friction behavior must be anticipated

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	11.30 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Double Cup Seal, 90NBR

  FREUDENBERG

  [Specifications]
  ・Type: Double Cup Seal
  ・Material: Nitrile rubber NBR
  ・Material Code: 90 NBR 109
  ・Hardness in Shore: 90
  ・Series: T-DUO-H
  ・Colour: Black
  
  [Features]
  ・Merkel complete piston for secondary hydraulic applications, preferably for spare parts requirement. Can only absorb low lateral forces

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	93.13 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Hat Seal, with Spring, 88NBR101

  FREUDENBERG

  [Specifications]
  ・Type: Rod Seals (Hydraulic)
  ・Material: Nitrile rubber NBR
  ・Material Code: 88 NBR 101
  ・Series: H
  ・Colour: Black
  
  [Features]
  ・Single-acting rod seal for less important applications and spare parts requirements

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	22.26 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Piston Seal, 3-part, with NBR-fabric

  FREUDENBERG

  [Specifications]
  ・Material: Sealing component: Nitrile rubber NBR and fabric reinforcement, Guide back-up rings: Polyamide
  ・Series: Simko 320
  ・Sealing component colour: Black, Guide back-up rings: Natural
  
  [Features]
  ・Double-acting Merkel piston seal with integrated guide back-up rings

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	32.87 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Rod Seal, 94AU925

  FREUDENBERG

  [Specifications]
  ・Material: Polyurethane
  ・Material code: 94 AU 925
  ・Colour: Blue
  ・Series: NAUIPSL
  ・Outer Diameter(mm): 40
  
  [Features]
  ・Combination wiper seal without metal reinforcement with special pneumatic sealing edge
  ・Combination seal with minimal space requirements, which seals inwards and wipes outwards
  ・The component needs no additional element (circlip) for axial fixing within the housing
  ・Robust design

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	21.95 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  U-ring, Piston, including Support Ring, 95AU-V142

  FREUDENBERG

  [Specifications]
  ・Profile ring material: Polyurethane
  ・Profile ring material code: 95 AU V142
  ・Back-up ring material: Polyacetal
  ・Back-up ring material code: POM PO202
  ・Profile ring color: blue
  ・Hardness in Shore: 95
  
  [Features]
  ・Single-acting piston seal also for standardised housings accor?ding to ISO 5597
  ・Very good static and dynamic tightness
  ・High extrusion resistance (back-up ring)
  ・"back-to-back" arrangement for pistons with pressure on both sides
  ・High reliability
  ・Relief grooves against dynamic drag pressure

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	17.08 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  HSD Packing for Hydraulic Pressure

  SAKAGAMI SEISAKUSHO

  A double pressure packing to enable thin-wall piston design. Compared to O-rings, this packing demonstrates a stable sealing performance without twisting or rolling damage.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	4.20 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  SFR Scraper

  SAKAGAMI SEISAKUSHO

  It can also prevent dust from entering from the outside to protect the packing or bearing. Special low friction pneumatic type. Mainly used for cylinders that are used under ordinary atmospheric conditions.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	2.93 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  [Light Load] SWA Wear Ring

  SAKAGAMI SEISAKUSHO

  A piston bearing made of fiber-reinforced phenolic resin that exhibits excellent load tolerance. Prevent seizing and galling of the piston that can be integrally attached to a groove. Used in low-hydraulic pressure cylinders and pneumatic cylinders.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	7.87 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Packing Specifically for IDI Rod Sealing

  NOK

  • A large cross-section design that can be used over a wide pressure range
  • Uses U801 iron rubber in the materials for excellent abrasion resistance and also sealing capability

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	4.73 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  ODI, Piston Seal Dedicated Packing

  NOK

  ▪ A large cross-section design that can be used over a wide pressure range.
  ▪Made from Iron Rubber (NOK product name of polyurethane elastomer) U801, providing excellent abrasion resistance and sealing performance.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	5.62 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Chevron Seal Set, NBR B4B246

  FREUDENBERG

  [Specifications]
  ・Material: BI-NBR B4B246
  ・Series: ES
  ・Colour: Black
  ・Outer Diameter(mm): 210
  
  [Features]
  ・Field-proven under ul tra-tough conditions
  ・Long useful lifetime
  ・Can be optimally matched to the application concerned
  ・Functions for a certain period even on poor surfaces
  ・Depending on the application and design involved, fluctuations in the leakage and friction behavior must be anticipated

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	296.52 €
  Min. Shipping Days ：	17 Days

  *Unit price with basic configuration

• 

  Piston Seal, 5-part, 80NBR-B281, L43

  FREUDENBERG

  [Specifications]
  ・Material: Sealing component: Nitrile rubber, Back-up ring: Polyester elastomer, Angled bush: Polyamide with special filling
  ・Series: L43
  
  [Features]
  ・The Merkel Piston Seal L 43 is used for sealing pistons with pressure on both sides
  ・The angled rings guide the piston on the cylinder bore
  ・No extrusion into the radial sealing gap
  ・Suitable for rapid pressure change
  ・Sealing component protected against twisting

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	30.32 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Piston Seal, HDP

  FREUDENBERG

  [Specifications]
  ・Material: Sliding Ring: Fiberglass filled and modified Polyamide, Energizing Element: Nitrile Rubber
  ・Sliding Ring Material code: PA 4112
  ・Energizing Element Material code: 70 NBR 177605
  ・Series: HDP
  
  [Features]
  ・Well suited for extreme operating conditions, including working pressures up to 60 MPa
  ・Particularly high abrasion resistance ensures long maintenance intervals, even with lower quality counter surfaces
  ・Highest resistance to gap extrusion
  ・Dynamic and static tightness analogous to PTFE piston seals
  ・Stepped cut in the seal ring simplifies installation in closed piston groove
  ・Rectangular energizing element generates a constantly high contact pressure and offers high protection against twisting in the installation space
  ・Mounting in standardized installation spaces according to DIN ISO 7425-1

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	31.43 €
  Min. Shipping Days ：	17 Days

  *Unit price with basic configuration

• 

  Piston Seal, PTFE-glass, with O-ring NBR, OMK-S

  FREUDENBERG

  [Specifications]
  ・PTFE Profile Ring material: PTFE GM201, Elastomer profile ring: NBR
  ・Colour: Profile ring: Grey
  ・Series: OMK-S
  
  [Features]
  ・Very high stability under pressure
  ・High torsional safety
  ・Very good extrusion safety
  ・High resistance to abrasion
  ・Good thermal conductivity
  ・Low friction, stick-slip free
  ・High contact pressure due to the elastomer profile ring

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	29.03 €
  Min. Shipping Days ：	17 Days

  *Unit price with basic configuration

• 

  Rod Seal, PTFE-bronze, with O-ring NBR, OMK-MR

  FREUDENBERG

  [Specifications]
  ・Profile Ring: PTFE-bronze Compound: PTFE B602
  ・Profile Ring color: Brown
  ・O-Ring material: Nitrile Rubber NBR
  ・Series: OMS-MR
  
  [Features]
  ・Very high stability under pressure
  ・Good thermal conductivity
  ・Very good extrusion safety
  ・High resistance to abrasion
  ・Low friction, stick-slip free

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	5.27 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  U-ring, Rod, 80NBR878

  FREUDENBERG

  [Specifications]
  ・Material: Nitrile rubber NBR
  ・Material code (profile ring): 80 NBR 878
  ・Back-up ring material (NI 250 / NI 400): Polyacetal(Code: POM 992020)
  ・Series: NI 150 / NI 250 / NI 400
  ・Hardness in Shore: 70
  
  [Features]
  ・Single-acting rod seal, predominantly for spare parts requirements

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	13.57 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

Loading...