Air Cylinders（Cylinder Operation Method：Double Acting Page 5）

?* Information on days to ship and prices

• 

  CX2, Slide Unit, Slide Bearing

  SMC

  Ensures high positional accuracy. Slide Unit, Double-Rod Type, Slide Bearing CX2 Series.
  [Features]
  · Provided with shock absorbers to absorb impact and noise.
  · Auto switches can be installed.
  · Smooth operation and high thrust.
  · Mountable on the housing or on the plate.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	16.34 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  CXWL / Dual Piston / Double Rod with Slide Unit / Built-in Shock Absorbers / Guided / Ball bushing

  SMC

  Ball bush bearing slide unit with built-in shock absorbers and end lock mechanism.
  [Features]
  · Provided with shock absorbers to absorb impact.
  · Mountable on the housing or on the plate.
  · Parallelism between the cylinder and the workpiece enables high accuracy.
  · Dramatically reduces installation labor hours.
  · The machining precision required for positioning during the installation of the cylinder has been reduced through the adoption of a special pin hole machining process, thus decreasing the amount of labor involved in adjustment.
  · High-precision ball bushing.
  · The ball bushing bearings decrease the rise in starting pressure that could be caused by a load imbalance.
  · This also enables smooth operation by ensuring stable travel resistance.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	14.53 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  CXTM, Platform Guide Rod Cylinder, Slide Bearing

  SMC

  The CXT Series Platform Cylinder integrates a slide table with an actuator.
  [Features]
  · A slide table with high rigidity and high precision.
  · Adjustment bolt with bumper is equipped as standard.
  · Allows for auto switches to be mounted.
  · Can be mounted on 2 sides (top and bottom).

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	290.81 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  CXS-A, Dual Rod Cylinder with Air Cushion

  SMC

  Dual-Rod Cylinder With Air Cushion CXS Series that can be mounted from 3 directions.
  [Features]
  · Dual-rod cylinder with guide function that is suitable for pick and place applications, etc.
  · Ball bushing bearings and slide bearings are standard for all series.
  · Workpieces can be mounted on 3 surfaces.
  · Twice the thrust, non-rotating accuracy of ±0.1°.
  · Adjustable stroke range of 0 to -5 mm.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	264.60 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  CXS Series Dual-Rod Cylinder With Rear End Lock

  SMC

  CXS Series Dual-Rod Cylinder With Rear End Lock can mount workpieces from 3 directions.
  [Features]
  · Dual-rod cylinder with guide function that is suitable for pick and place applications, etc.
  · Ball bushing bearings and slide bearings are standard for all series.
  · Workpieces can be mounted on 3 surfaces.
  · Twice the thrust, non-rotating accuracy of ±0.1°.
  · Adjustable stroke range of 0 to -5 mm.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	235.94 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

• 

  Dual-Rod Cylinder Double-Rod Type CXSW Series

  SMC

  Dual-Rod Cylinder Double Rod Type CXSW Series that can be mounted from 3 directions.
  [Features]
  · Dual-rod cylinder with guide function that is suitable for pick and place applications, etc.
  · Auto switch can be installed from 3 directions.
  · Unique air cushion mechanism with no cushion ring.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	252.66 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Air Cylinder, Direct Mount Type: Double Acting, Single Rod CM2R Series

  SMC

  An air cylinder manufactured by SMC
  [Features]
  Female rod end available as standard
  · Rod-end type can be selected to fit the application
  · Easy fine adjustment of auto switch position
  · Transparent switch bracket improves visibility of indicator LED
  · The Direct Mount Cylinder CM2R Series are cylinders that can be installed directly through use of a square rod cover
  · Saves space
  · Improved installation accuracy and strength
  · 2 types of installation, base mounting and front mounting
  

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	61.94 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Air Cylinder, Direct Mount, Non-Rotating Rod Type, Double Acting, Single Rod CM2RK Series

  SMC

  A standard type (round) air cylinder.
  [Features]
  · Female rod end available as standard.
  · Improved auto switch operability, easy to adjust position.
  · Single clevis and trunnion pivot brackets are available.
  · Part numbers are set for products with rod-end brackets and pivot brackets.
  · With auto switch.
  · A cylinder with a hexagonal rod that prevents rotation.
  · 2 types of installation, base mounting and front mounting, that can be chosen to suit the application.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	78.27 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  C(D)UW, Free Mount Cylinder, Double Rod

  SMC

  Free mount series of compact air cylinders.
  [Features]
  · Double rod type.
  · A space-saving air cylinder with multiple surfaces capable of direct mounting.
  · With auto switch.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	56.81 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Free Mount Cylinder, Non-rotating, Long Stroke, CUK Series

  SMC

  An air cylinder manufactured by SMC.
  [Features]
  · A space-saving air cylinder with multiple surfaces capable of direct mounting.
  

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	93.16 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  C(D)QSW, Compact Cylinder, Double Acting, Double Rod

  SMC

  Compact Cylinder, Standard Type, Double Acting, Double Rod that that is ideal for machine designs with small space requirements.
  [Features]
  · Square body shape that gives you flexibility for designing machines.
  · 2-way basic mounting.
  · Non-rotating rod with high non-rotating accuracy.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	37.52 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  M(D)U Plate Cylinder, Double Acting, Single Rod w / Auto Switch Mounting Groove

  SMC

  Plate Cylinder, Double Acting, Single Rod MU Series that allows small auto switches to be mounted in 4 directions.
  [Features]
  · Auto switches can be mounted easily.
  · Can be mounted without brackets and in flexible ways.
  · Can be mounted with a short pitch.
  · Various brackets are available to accommodate a wide range of applications.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	68.77 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Smooth Cylinder CQ2Y Series

  SMC

  CQ2Y Series Smooth Cylinder that allows stable operation even at a low speed of 5 mm/s.
  [Features]
  · Ensures low friction, even during bi-directional operation.
  · Can be operated regardless of the direction of pressure.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	58.00 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Air Cylinder, Standard Type, Double Acting, Single Rod CJ2 Series

  SMC

  A standard type double acting single rod CJ2 series air cylinder.
  [Features]
  · Double foot, head flange and double-side bossed have been added to the mounting types.
  · Improved freedom in mounting.
  · Head cover with boss is also available.
  · Easy fine adjustment of auto switch position.
  · Transparent switch bracket improves visibility of indicator LED.
  · A head cover port location that is perpendicular to the axis has been added to ø6 (6‑mm diameter).
  

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	36.16 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Air Cylinder, Direct Mount Type, Double Acting, Single Rod CJ2R Series

  SMC

  Direct mount cylinders that can be installed directly through use of a square rod cover.
  [Features]
  · Improved freedom in mounting.
  · Easy fine adjustment of auto switch position.
  · Transparent switch bracket improves visibility of indicator LED.
  · A head cover port location that is perpendicular to the axis has been added to ø6 (6‑mm diameter).
  · Part numbers are set for products with rod-end brackets.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	53.27 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

• 

  C(D)UK, Free Mount Cylinder, Non-rotating, Double Acting

  SMC

  Free mount series of compact air cylinders.
  [Features]
  · Non-rotating rod type.
  · A space-saving air cylinder with multiple surfaces capable of direct mounting.
  · With auto switch.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	68.27 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  CQSKW Series Non-Rotating Rod Type, Double Acting, Double Rod

  SMC

  Compact cylinder that is ideal for machine designs with small space requirements.
  [Features]
  · The compact auto switch (M9) will not protrude from the switch mounting groove.
  · Even when auto switches are used, they do not take up extra space.
  · The cross-section of the cylinder tube is the same configuration with or without an auto switch.
  · Square body shape that gives you flexibility for designing machines.
  · Auto switch mounting direction allows for flexible design requirements.
  · 2-way basic cylinder mounting.
  · Non-rotating rod with high non-rotating accuracy.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	64.73 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

• 

  HY(D)Q, Hygienic Design Cylinder, Basic Type

  SMC

  [Features]
  · A water-resistant air cylinder configured for easy cleaning.
  · 5 times increase in lifespan (compared to manufacturer's current models).

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	152.31 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

• 

  CM2Q Series Air Cylinder, Low Friction Type: Double Acting, Single Rod

  SMC

  *This series has been migrated to the new "Smooth Cylinder/CM2Y" series, which realizes both-direction low friction and low-speed operation.
  

  Select to compare

  Configure now
  Starting from∗ ：	69.18 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

• 

  CA2W□H Series Air-Hydro Type Cylinder, Double Acting, Double Rod

  SMC

  Double acting, double rod air cylinder that is up to 15% lighter in weight.
  [Features]
  · Hydro type.
  · Available with (CDA2W) or without (CA2W) auto switch.
  · Port thread types: Rc, NPT, G.
  · Bore size: 40 mm / 50 mm / 63 mm / 80 mm / 100 mm.
  · Mounting: basic, axial foot, rod-side flange, center trunnion.
  · Rod boot material (J): nylon tarpaulin, maximum ambient temperature 70°C.
  · Rod boot material (K): heat-resistant tarpaulin, maximum ambient temperature 110°C*.
  *Maximum ambient temperature for the rod boot unit.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	401.90 €
  Min. Shipping Days ：	44 Days

  *Unit price with basic configuration

• 

  MB□Q Series Air Cylinder, Low Friction Type

  SMC

  *This series has been migrated to the new "Smooth Cylinder/MBY" series, which realizes both-direction low friction and low-speed operation.
  
  [Features]
  · A lightweight air cylinder made lighter by up to 10% by changing the cover shape
  · Suitable mounting brackets can be selected for the installation conditions
  · Improved mounting freedom
  · With auto switch (MDB□Q)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	183.85 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

• 

  MB1K Series Square-Tube Type Air Cylinder, Non-Rotating Rod Type, Double Acting, Single Rod

  SMC

  A lightweight air cylinder that can be made lighter by changing the shape of the rod cover and head cover.
  [Features]
  · Square-tube type air cylinder.
  · Can mount small auto switches on 4 surfaces.
  · Non-rotating type (MB1K) or type with auto switch (built-in magnet) (MDB1K).
  · RoHS compliant.
  · Bore size: 32 mm / 40 mm / 50 mm / 63 mm / 80 mm / 100 mm.
  · Port thread types: Rc, NPT, G.
  · Rod boot: none (Nil), nylon tarpaulin (J), heat-resistant tarpaulin (K).
  · Action: double acting, single rod.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	160.55 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

• 

  CBA2 Series End Lock Cylinder (Standard, Heat Resistant)

  SMC

  End lock cylinder that holds the cylinder's original position even if the air supply is cut off.
  [Features]
  · Same dimensions as standard CA2 Series cylinder.
  · Non-locking type and locking type are standardized for manual release.
  · Without auto switch (CBA2) or with auto switch (built-in magnet) (CDBA2).
  · Tube material: aluminum tube, steel tube (*Not available for products with auto switch.)
  · Bore size: 40 mm / 50 mm / 63 mm / 80 mm / 100 mm.
  · Port thread types: Rc, NPT, G.
  · Cushion: air cushion (Nil), no cushion (N).
  · Lock position: with head-end lock (H), with rod-end lock (R), with double-end lock (W).

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	215.05 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

• 

  CS1W Series Double Rod Type Air Cylinder, Lube / Non-Lube Type, Air-Hydro Type

  SMC

  A large-diameter tie-rod type air cylinder with a square cover.
  [Features]
  · With auto switch (CDS1W).
  · *The air-hydro type is available in ø125 (125‑mm diameter), ø140 (140‑mm diameter), and ø160 (160‑mm diameter) only.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	682.68 €
  Min. Shipping Days ：	16 Days

  *Unit price with basic configuration

• 

  CS1□Q Series Non-Lube, Low Friction Type Air Cylinder

  SMC

  · Air cylinder designed with low piston friction.
  [Features]
  · A large-diameter tie-rod type air cylinder with a square cover.
  · With auto switch (CS1□Q).
  · Ideal for applications such as contact pressure control, which requires smooth movements at low pressures.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	582.74 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

• 

  CS2W Series Double Rod Type Air Cylinder

  SMC

  Air cylinder whose operability has been improved by placing the piping port and cushion valve operation position on the same side.
  [Features]
  · Lighter installation achieved by reducing weight.
  · Die-cast rod cover and head cover used to achieve greater weight reduction.
  · Rod bore size changed to suit uses, achieving greater weight reduction.
  · Allowable lateral load equivalent to CS1 Series.
  · Even if rod diameter is changed to suit various needs, functionality remains equal to CS1 Series.
  · Improved operability after installation.
  · Cylinder mounting dimensions and rod end thread sizes are interchangeable with CS1 Series.
  · Maintenance improved by making cushion seals replaceable.
  · Can be equipped with small auto switches.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	498.32 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

• 

  Smooth Cylinder CS2Y Series

  SMC

  [Features]
  · Air cylinder designed with low piston friction, ideal for applications such as contact pressure control, which requires smooth movements at low pressures
  · Low sliding resistance with minimum operating pressure of 0.005 MPa

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	500.11 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

• 

  HYB Series Round Type Hygienic Design Cylinder

  SMC

  A water-resistant air cylinder configured for easy cleaning.
  [Features]
  · To keep the product flat, grooves for auto switches and holes for cushion needles, etc. have been eliminated.
  · Cylinder with improved water resistance and 5 times longer lifespan (compared to manufacturer's current models).
  · With auto switch (HYDB).

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	159.82 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

• 

  HY(D)C, Hygienic Design Cylinder, ISO Type

  SMC

  A water-resistant air cylinder configured for easy cleaning.
  [Features]
  · Cylinder with improved water resistance and 5 times longer lifespan (compared to manufacturer's current models).
  · With auto switch (HYDCB).
  · To keep the product flat, grooves for auto switches and holes for cushion needles, etc. have been eliminated.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	243.98 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  CNA2W Series Cylinder With Lock, Double Acting, Double Rod

  SMC

  A cylinder with lock that is suitable for intermediate stops, emergency stops and drop prevention.
  [Features]
  · Simple construction.
  · High locking efficiency.
  · High reliability and stable holding force.
  · Compact lock unit saves space.
  · Can be locked in both directions.
  · Maximum piston speed: 1000 mm/s.
  · Manual override for unlocking.
  · Structured so as not to be impacted by the quality of the lock-release air.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	510.65 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

• 

  C(D)LM2, Air Cylinder, Double Acting, Single Rod, Fine Lock

  SMC

  [Features]
  · Provided with a compact built-in lock mechanism, making it suitable for intermediate stop, emergency stop, drop prevention, etc.
  · Can be locked in both directions.
  · Maximum piston speed: 500 mm/s.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	379.50 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Fine Lock Cylinder, Double Acting, Single Rod CLG1 Series

  SMC

  [Features]
  · Provided with a compact built-in lock mechanism, it is suitable for intermediate stop, emergency stop, drop prevention, etc.
  · Can be locked in both directions.
  · Maximum piston speed: 500 mm/s.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	238.94 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

• 

  CL1 Series Lock-Up Cylinder, Double Acting, Single Rod

  SMC

  [Features]
  · A self-locking style cylinder that contains a ring that is tilted by a spring force, which is further tilted by the load that is applied to the cylinder, thus locking the piston rod.
  · Suitable for intermediate stop, emergency stop, drop prevention, etc.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	370.18 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

• 

  CNS Series Cylinder With Lock, Double Acting, Single Rod

  SMC

  A cylinder with lock that is suitable for intermediate stops, emergency stops and drop prevention.
  [Features]
  · Simple construction.
  · High locking efficiency.
  · High reliability and stable holding force.
  · Metal rod scraper provided as standard equipment.
  · Manual override for unlocking in emergency.
  · Structured so as not to be impacted by the quality of the lock-release air.
  · Can be locked in both directions.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1,941.55 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

• 

  CLS Series Cylinder With Lock, Double Acting, Single Rod

  SMC

  A cylinder with lock that is suitable for intermediate stops, emergency stops and drop prevention.
  [Features]
  · Manual unlocking function.
  · Structured so as not to be impacted by the quality of the lock-release air.
  · Can be locked in both directions.
  · Lock unit with short overall length.
  · Stable holding force.
  · Switch for lock unit.
  · Can be equipped with small auto switches.
  · Fail-safe structure.
  · Improved maintainability.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2,315.39 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

• 

  MGT Series Cylinder With Turntable

  SMC

  [Features]
  · Combination of compact cylinder with guide (MGP series) and manual turntable.
  · High-precision bearings for smooth turning return movement.
  · Table unit has positioning mechanisms for each 90° and 180° of rotation.
  · Rotation position can be detected by mounting an auto switch sensor.
  · 3 types of mounting are possible.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1,439.52 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

• 

  MLU Series Plate Cylinder With Lock

  SMC

  [Features]
  · Maintains supply pressure to prevent dropping of the load when residual pressure is released.
  · Drop prevention is possible at any point of the stroke.
  · Drop prevention for mid-stroke emergency stops.
  · Locking position can be changed to accommodate external stopper positions and thickness of clamped workpieces.
  · Simple and reliable locking system.
  · Slim and compact lock unit.
  · Easy manual unlocking.
  · Locking direction can be selected.
  · Various brackets are available to accommodate a wide range of applications.
  · Can be mounted in flexible ways.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	296.34 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

• 

  Pencil Cylinder, Double Acting, Single Rod Type, SCPD3 Series

  CKD

  It is an ultra-compact and lightweight series with a small bore (ø6 to ø16) among general cylinders.

  Select to compare

  Configure now
  Min. Shipping Days ：	14 Days

• 

  Compact Cylinder With Valve, Guide-Rod Type CVQM Series

  SMC

  Helps save man-hours, energy and space by an integrated structure.
  [Features]
  · Non-rotating accuracy of ±0.1° or less.
  · 2 to 3 times the lateral load resistance (compared with CDQ2 Series).
  · Direct installation of load is possible.
  · Mount dimensions compatible with CQ2 Series.
  · Guide rod type with improved lateral load resistance and non-rotating accuracy.
  · Can be equipped with a small 2-color indicator solid state auto switch.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	176.81 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Low Speed Cylinder, Double Acting: Single Rod CUX Series

  SMC

  [Features]
  · Reduced seizing and extending too quickly.
  · Realizes a smooth operation even at 0.5 mm/s (1 mm/s at ø16 or less).
  · Improved functionality (new structure equivalent to the standard models).
  · Interchangeable (mounting compatibility) with standard products.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	84.15 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Sine Cylinder, REC Series

  SMC

  Provides low acceleration / low deceleration transport of shock-sensitive workpieces.
  [Features]
  · Realizes space-saving by simple circuit.
  · Compatible with Cleanroom Class, ISO class 4 (ISO14644-1).
  · · Reduces takt time.
  · Smooth acceleration and deceleration unaffected by load, speed and pressure changes.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	265.79 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

• 

  Double Power Cylinder, Without Non-Rotating Mechanism MGZR Series

  SMC

  A double power cylinder with double the extension output strength.
  [Features]
  · Unique construction achieves double the extended piston area.
  · With coil scraper.
  [Applications]
  · For lifting and pressing work.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	331.76 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Valve Mounted Air Cylinder, Double Acting CVS1 Series

  SMC

  [Features]
  · Built-in speed controller.
  · Can change between rod extended when energized and retracted when energized.
  · A solenoid valve can be selected.
  · Auto switch cylinders with mounted switches can also be manufactured.

  Select to compare

  Configure now
  Starting from∗ ：	682.31 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

• 

  Air Cylinder With Valve, Non-Rotating Rod Type: Double Acting CVS1K Series

  SMC

  [Features]
  · Built-in speed controller.
  · Can change between rod extended when energized and retracted when energized.
  · A solenoid valve can be selected.

  Select to compare

  Configure now
  Starting from∗ ：	535.53 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

• 

  Low Speed Cylinder, Double Acting: Single Rod CJ2X Series

  SMC

  [Features]
  · Reduced seizing and extending too quickly.
  · Realizes a smooth operation even at 0.5 mm/s (1 mm/s at ø16 or less).
  · Improved functionality (new structure equivalent to the standard models).
  · Interchangeable (mounting compatibility) with standard products.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	49.42 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

Loading...