ACCURATE
UltraSpring Compression Coil Springs
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Stainless Steel Wire / Piano Wire / Oil Tempered Wire | Up to 1.50 / 1.51 to 4.50 / 4.51 to 8.50 / 8.51 to 16.00 / 16.01 to 30.00 / 30.01 to 50.00 / 50.01 to 73.00 / 73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 / 580.01 or More | With Grinding / Without Grinding | 0.21 ~ 2750.77 | 0.78 ~ 538.05 | 1 ~ 1015 | 0.6 ~ 135 | 0.4 ~ 115 | 0.029 ~ 737.627 |
MISUMI
Round Wire Coil Springs / Deflection 40%-60% / Configurable / O.D. Referenced
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Stainless Steel Wire / Piano Wire | – | With Grinding / Without Grinding | – | – | 15 ~ 250 | 5 ~ 27 | – | – |
SAMINI
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Stainless Steel Wire / Piano Wire | Up to 1.50 / 1.51 to 4.50 / 4.51 to 8.50 / 8.51 to 16.00 / 16.01 to 30.00 / 30.01 to 50.00 / 50.01 to 73.00 / 73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 / 580.01 or More | With Grinding / Without Grinding | 0.81 ~ 7220 | – | 5 ~ 400 | 1.7 ~ 100 | – | 0.05 ~ 239 |
MISUMI
Round Wire Coil Springs / Deflection 60%-75% / O.D. Referenced
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Piano Wire | Up to 1.50 / 1.51 to 4.50 / 4.51 to 8.50 / 8.51 to 16.00 / 16.01 to 30.00 | Without Grinding | 0.38 ~ 23.5 | 1.25 ~ 36 | 5 ~ 90 | 3 ~ 27 | 2.3 ~ 24.4 | 0.1 ~ 0.5 |
MISUMI
Round Wire Coil Springs / Deflection 45% / O.D. Referenced
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Stainless Steel Wire | Up to 1.50 / 1.51 to 4.50 / 4.51 to 8.50 / 8.51 to 16.00 / 16.01 to 30.00 / 30.01 to 50.00 | With Grinding / Without Grinding | 0.15 ~ 35.3 | 1.25 ~ 44 | 5 ~ 80 | 2 ~ 20 | – | 0.05 ~ 0.98 |
MISUMI
Round Wire Coil Springs / Deflection 40% / O.D. Referenced
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Stainless Steel Wire | Up to 1.50 / 1.51 to 4.50 / 4.51 to 8.50 / 8.51 to 16.00 / 16.01 to 30.00 / 30.01 to 50.00 / 50.01 to 73.00 / 73.01 to 107.00 / 107.01 to 150.00 | With Grinding / Without Grinding | 0.98 ~ 125.5 | 3 ~ 48 | 5 ~ 80 | 2 ~ 20 | – | 0.5 ~ 3.9 |
MISUMI
Round Wire Coil Springs / Deflection 40%-45% / O.D. Referenced
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Piano Wire | Up to 1.50 / 1.51 to 4.50 / 4.51 to 8.50 / 8.51 to 16.00 / 16.01 to 30.00 / 30.01 to 50.00 / 50.01 to 73.00 / 73.01 to 107.00 / 107.01 to 150.00 | With Grinding / Without Grinding | 0.98 ~ 117.7 | 2.75 ~ 60 | 5 ~ 100 | 2 ~ 27 | 1.4 ~ 23.6 | 0.5 ~ 2.9 |
TOKYO HATSUJYO MANUFACTURING
Round Wire Compression Coil Spring J Spring JA【10 – 20 darab】
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Stainless Steel Wire | Up to 1.50 / 1.51 to 4.50 / 4.51 to 8.50 / 8.51 to 16.00 / 16.01 to 30.00 | – | – | – | 5 ~ 50 | 2 ~ 14 | 1.48 ~ 12 | 0.07 ~ 4.71 |
MISUMI
Round Wire Coil Springs / Deflection 25%-30% / O.D. Referenced
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Piano Wire | 4.51 to 8.50 / 8.51 to 16.00 / 16.01 to 30.00 / 30.01 to 50.00 / 50.01 to 73.00 / 73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 / 580.01 or More | With Grinding / Without Grinding | 4.9 ~ 735.5 | 3.5 ~ 76 | 5 ~ 100 | 3 ~ 27 | 1.7 ~ 21.4 | 2.9 ~ 29.4 |
KS SANGYO
DS Series, Compression Coil Spring【1 – 20 darab】
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Stainless Steel Wire | 4.51 to 8.50 / 8.51 to 16.00 / 16.01 to 30.00 / 30.01 to 50.00 / 50.01 to 73.00 / 73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 / 580.01 or More | With Grinding | 4.7 ~ 707.1 | 3.4 ~ 253.7 | 4.4 ~ 490 | 3 ~ 68 | – | 0.116 ~ 97.857 |
KS SANGYO
D Series Compression Coil Spring (DIN 2098 Standard)【1 – 20 darab】
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Stainless Steel Wire / Piano Wire / Oil Tempered Wire | Up to 1.50 / 1.51 to 4.50 / 4.51 to 8.50 / 8.51 to 16.00 / 16.01 to 30.00 / 30.01 to 50.00 / 50.01 to 73.00 / 73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 / 580.01 or More | With Grinding / Without Grinding | 0.181 ~ 4111.591 | 0.8 ~ 258.3 | 1 ~ 490 | 0.6 ~ 86.3 | – | 0.0294 ~ 232.26 |
MISUMI
Round Wire Coil Springs / Deflection 45% / I.D. Referenced
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Stainless Steel Wire | 1.51 to 4.50 / 4.51 to 8.50 / 8.51 to 16.00 / 16.01 to 30.00 / 30.01 to 50.00 / 50.01 to 73.00 / 73.01 to 107.00 | With Grinding / Without Grinding | 2.65 ~ 102.9 | 6 ~ 65 | 15 ~ 100 | 6.25 ~ 20.85 | 5 ~ 16 | 0.29 ~ 2.94 |
SHOWA SPRING
Compression Coil Spring, SWP-A/SUS304WP-B【1 – 20 darab】
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Stainless Steel Wire / Piano Wire | 1.51 to 4.50 / 4.51 to 8.50 / 8.51 to 16.00 / 16.01 to 30.00 / 30.01 to 50.00 / 50.01 to 73.00 / 73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 / 580.01 or More | With Grinding / Without Grinding | 2.33 ~ 1558.56 | – | 7 ~ 300 | 4.5 ~ 80 | – | 0.107 ~ 86.891 |
MISUMI
Round Wire Coil Springs / Deflection 35%-40% / O.D. Referenced
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Piano Wire | 1.51 to 4.50 / 4.51 to 8.50 / 8.51 to 16.00 / 16.01 to 30.00 / 30.01 to 50.00 / 50.01 to 73.00 / 73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 | With Grinding / Without Grinding | 2.9 ~ 171.6 | 3 ~ 65 | 5 ~ 100 | 3 ~ 27 | 1.9 ~ 22.8 | 1.5 ~ 4.9 |
TOKYO HATSUJYO MANUFACTURING
Strong Spring TF (Light Small Load)
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Oil Tempered Wire | 73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 / 580.01 or More | – | 78.5 ~ 4000 | – | 10 ~ 500 | 8 ~ 70 | 4 ~ 38.5 | 1.91 ~ 94.07 |
TOKYO HATSUJYO MANUFACTURING
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Oil Tempered Wire | 73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 / 580.01 or More | – | 98.1 ~ 6100 | – | 10 ~ 500 | 8 ~ 70 | 4 ~ 38.5 | 3.07 ~ 198.61 |
MISUMI
Flat Wire Coil Springs / Deflection 65% / O.D. Referenced
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Oil Tempered Wire | 16.01 to 30.00 / 30.01 to 50.00 / 73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 | – | 29.4 ~ 392.3 | 7 ~ 105 | 20 ~ 300 | 11 ~ 42 | 7 ~ 31 | 0.45 ~ 12.07 |
MISUMI
Round Wire Coil Springs / Deflection 27%-30% / O.D. Referenced
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Stainless Steel Wire | 1.51 to 4.50 / 4.51 to 8.50 / 8.51 to 16.00 / 16.01 to 30.00 / 30.01 to 50.00 / 50.01 to 73.00 / 73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 | With Grinding / Without Grinding | 3.4 ~ 353 | 3.25 ~ 60 | 5 ~ 80 | 4 ~ 20 | – | 2 ~ 14.7 |
KS SANGYO
K Series Compression Coil Spring (Japan Spring Manufactures Association Standard)【1 – 20 darab】
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Stainless Steel Wire | Up to 1.50 / 1.51 to 4.50 / 4.51 to 8.50 / 8.51 to 16.00 / 16.01 to 30.00 / 30.01 to 50.00 / 50.01 to 73.00 / 73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 | With Grinding / Without Grinding | 0.62 ~ 327.32 | 1.92 ~ 57.5 | 4 ~ 126 | 2 ~ 36 | – | 0.059 ~ 42.532 |
MISUMI
Flat Wire Coil Springs / Deflection 40%-50% / O.D. Referenced
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Oil Tempered Wire | 50.01 to 73.00 / 73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 / 580.01 or More | – | 59 ~ 3920 | 5 ~ 250 | 10 ~ 500 | 6 ~ 70 | 3 ~ 38.5 | 2 ~ 112 |
NIPPON CHEMICAL SCREW
Polycarbonate / Plastic Spring PC / PB
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Polycarbonate | 1.51 to 4.50 / 4.51 to 8.50 / 8.51 to 16.00 | Without Grinding | – | – | 20 ~ 50 | 8 ~ 12 | 4 ~ 8 | 0.33 ~ 1.14 |
MISUMI
Flat Wire Coil Springs / Deflection 32%-40% / O.D. Referenced
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Oil Tempered Wire | 73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 / 580.01 or More | – | 78 ~ 824 | 6 ~ 120 | 10 ~ 200 | 6 ~ 25 | 3 ~ 12.5 | 3.1 ~ 82.4 |
SAMSOL
Mold Spring SF (Light Small Load)
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Steel | 73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 / 580.01 or More | – | – | – | 10 ~ 500 | 8 ~ 70 | 4 ~ 38.5 | 1.666 ~ 112.014 |
SAMSOL
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Steel | 73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 / 580.01 or More | – | – | – | 10 ~ 500 | 8 ~ 70 | 4 ~ 38.5 | 2.744 ~ 213.542 |
SAMINI
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Oil Tempered Wire | 73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 / 580.01 or More | – | 88 ~ 15362 | 10 ~ 240 | 20 ~ 300 | 10 ~ 70 | 5 ~ 38.5 | 2.8 ~ 853 |
TOKYO HATSUJYO MANUFACTURING
Strong Spring TM (Middle Load)
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Oil Tempered Wire | 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 / 580.01 or More | – | 137.3 ~ 8500 | – | 10 ~ 350 | 8 ~ 70 | 4 ~ 38.5 | 5.32 ~ 367.48 |
SHINSEI HATSUJHO
Compressed Spring, C Series【1 – 5 darab】
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Steel Wire | 4.51 to 8.50 / 8.51 to 16.00 / 16.01 to 30.00 / 50.01 to 73.00 / 107.01 to 150.00 | Without Grinding | – | – | 29 ~ 126 | 6.5 ~ 36 | – | – |
SAMINI
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Inconel | 4.51 to 8.50 / 8.51 to 16.00 / 16.01 to 30.00 / 30.01 to 50.00 / 50.01 to 73.00 / 73.01 to 107.00 / 107.01 to 150.00 | With Grinding / Without Grinding | 5.39 ~ 117.7 | – | 10 ~ 60 | 6 ~ 30 | – | 0.56 ~ 8.04 |
MISUMI
Round Wire Coil Springs / Deflection 15%-25% / O.D. Referenced
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Stainless Steel Wire | 4.51 to 8.50 / 8.51 to 16.00 / 16.01 to 30.00 / 30.01 to 50.00 / 50.01 to 73.00 / 73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 | With Grinding / Without Grinding | 6.1 ~ 353 | 3.75 ~ 64 | 5 ~ 80 | 4 ~ 20 | – | 4.9 ~ 29.4 |
MISUMI
Washers for Coil Springs / Tapped
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
– | – | – | – | – | – | – | – | – |
MISUMI
Flat Wire Coil Springs / Deflection 19%-24% / O.D. Referenced
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Oil Tempered Wire | 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 / 580.01 or More | – | 137 ~ 1833 | 7.6 ~ 133 | 10 ~ 175 | 6 ~ 25 | 3 ~ 12.5 | 9.5 ~ 306 |
SHINSEI HATSUJHO
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Stainless Steel Wire | – | – | – | – | 70 ~ 75 | 3.5 ~ 22.6 | – | – |
MISUMI
Washers for Coil Springs / Flanged
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
– | – | – | – | – | – | – | – | – |
MISUMI
Flat Wire Coil Springs / Deflection 25%-32% / O.D. Referenced
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Oil Tempered Wire | 73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 / 580.01 or More | – | 98 ~ 1225 | 6.8 ~ 119 | 10 ~ 175 | 6 ~ 25 | 3 ~ 12.5 | 5.1 ~ 153 |
TOKYO HATSUJYO MANUFACTURING
Strong Spring TB (Extra Heavy Load)
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Oil Tempered Wire | 230.01 to 580.00 / 580.01 or More | – | 343 ~ 18000 | – | 10 ~ 350 | 8 ~ 70 | 4 ~ 38.5 | 20.76 ~ 1285.71 |
TOKYO HATSUJYO MANUFACTURING
Strong Spring for High Deflection TR
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Oil Tempered Wire | 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 / 580.01 or More | – | – | – | 20 ~ 300 | 14.5 ~ 46 | 9 ~ 32 | 1.74 ~ 27.24 |
SAMINI
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Titanium Alloy | 30.01 to 50.00 / 50.01 to 73.00 | – | 49 ~ 56 | – | 15 ~ 25 | 12 | – | 4.1 ~ 9 |
MISUMI
Flat Wire Coil Springs / Deflection 50% / O.D. Referenced
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Oil Tempered Wire | 73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 / 580.01 or More | – | 78.5 ~ 1324 | 7.5 ~ 200 | 15 ~ 400 | 10.5 ~ 50 | 6 ~ 36 | 1.7 ~ 52.96 |
TOKYO HATSUJYO MANUFACTURING
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Oil Tempered Wire | 150.01 to 230.00 / 230.01 to 580.00 / 580.01 or More | – | 206 ~ 13000 | – | 10 ~ 350 | 8 ~ 70 | 4 ~ 38.5 | 10.78 ~ 736.11 |
NORELEM
Compression springs ISO 10243, light load (26000)
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Steel Wire | – | – | – | – | 25 ~ 305 | 10 ~ 25 | 5 ~ 12.5 | – |
DANLY
DANLY Spring Series (Round Wire)
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Oil Tempered Wire | 1.51 to 4.50 / 4.51 to 8.50 / 8.51 to 16.00 / 16.01 to 30.00 / 30.01 to 50.00 / 50.01 to 73.00 | – | 37.8 ~ 652.1 | 7.5 ~ 122 | 25 ~ 305 | 10 ~ 16 | 5 ~ 8 | 0.3 ~ 86.9 |
MISUMI
Flat Wire Coil Springs / Deflection 60% / O.D. Referenced
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Oil Tempered Wire | 50.01 to 73.00 / 73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 / 580.01 or More | – | 68.6 ~ 588.4 | 6 ~ 120 | 15 ~ 300 | 10.5 ~ 43 | 6 ~ 31 | 1.09 ~ 19.61 |
SAMSOL
Mold Spring (SG Ultra Heavy Load)
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Steel | 230.01 to 580.00 / 580.01 or More | – | – | – | 15 ~ 300 | 10 ~ 50 | 5 ~ 25 | 24.5 ~ 1262.24 |
SUNCO
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
– | – | – | – | – | – | – | – | – |
SAMINI
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Steel | 4.51 to 8.50 / 8.51 to 16.00 | With Grinding | 5.685 ~ 13.253 | – | 200 ~ 350 | 97 ~ 147 | – | 49.4 ~ 194.9 |