V Belt（Page 2）

?* Information on days to ship and prices

• • Promotional pricing

  

  Red Label V-Belt, B Type

  MITSUBOSHI BELTING

  [Features]
  · The most popular belt for power transmission.
  · Economical, readily available and easy to replace.
  · Belt with good dimensional stability, "set-free" effective for multi-runners.
  · A high-load transmission belt with excellent heat resistance, oil resistance and flexibility as well as anti-static properties.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	20.00 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  V Belt Red (B Type)

  BANDO

  Uses synthetic rubber for excellent heat and oil resistance. With antistatic performance.
  
  [Features]
  · Low cost per horsepower transmission
  · Widely available.
  · Easy handling.
  · Employing a powerful, low elongation polyester cord with special synthetic rubber formulation.
  · Power up by about 60% compared to the standard.
  · Electrical resistance (anti-static performance) is 0.05 to 0.2 MΩ (within the V-belt 216 mm), and US RMA standard approved (rated 6 MΩ or less).
  · Excellent heat, oil and chemical resistance, with flame retardancy.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	20.21 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  ConCar Narrow V-Belt - Profile XPZ / AVX 10

  CONCAR

  [Specifications]
  ・Type: open-edge, serrated
  ・Material: Neoprene
  ・Width(mm): 9.7
  ・Height(mm): 8
  ・Standard: DIN 7753
  
  Raw edge, moulded cogged V-belts (REC) are available - like the wrapped V-belts - as classic V-belts or narrow V-belts. Both belt types are positive engagement, trapezoid drive belts made of neoprene, the force of which is transferred in the edges. Unlike the wrapped V-belts, the raw edge, moulded cogged V-belts have no textile wrapping, but are cogged. Raw edge, moulded cogged ConCar V-belts are delivered as non-varying sets and are used in mechanical engineering, for example.

  Select to compare

  Configure now
  Starting from∗ ：	5.60 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  V-belt / Mixture of Elastomer / Length 425-10672mm

  GATES

  · Excellent performance/cost ratio
  · Reliability and efficiency
  · Long belt life reducing replacement and maintenance costs
  · Match system: all sizes meet Gates UNISET tolerances, they can be installed without matching
  · REACH and RoHS 2 compliant
  · Temperature range: -30°C to +60°C

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	8.72 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  V-belt, FO Pioneer

  CONTITECH

  [Specifications]
  ・Material: Mixture of elastomer
  ・FO Pioneer
  ・Height(mm): 8, 9, 13
  ・Width(mm): 9.7, 12.7, 16.3

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	8.57 €
  Min. Shipping Days ：	17 Days

  *Unit price with basic configuration

• 

  Maxstar Wedge V-Belt, 5V Type

  MITSUBOSHI BELTING

  Unique V-belt with narrow shape and high transmission capabilities. Saves energy, enables compact design. Excellent heat resistance and static electricity prevention.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	41.46 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Red V-Belt M Type

  MITSUBOSHI BELTING

  The most popular belt as a means of power transmission. Economical, readily available, and easy to replace.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	12.57 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Energy Saving Red (A Type)

  BANDO

  V-belt allows for reduction of power of factory equipment. Pulley replacement is not required.

  Select to compare

  Configure now
  Starting from∗ ：	23.25 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  V-Belt Standard (D Type)

  BANDO

  The most versatile belt.

  Select to compare

  Configure now
  Starting from∗ ：	81.34 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  ConCar Power Belt - Profile SPB

  CONCAR

  [Specifications]
  ・Material: Neoprene
  ・Height(mm): 15.6
  ・Rib spacing(mm): 19
  ・Standard: DIN 7753
  
  Banded belts consist of several V-belts which are connected to each other via a resilient tie band. The individual belts in the banded belt have the same length and cannot expand in different ways. The connection prevents the belts from twisting sideways or jumping out of the pulley. A banded belt stands out particularly for its even, highly stable power transfer and because it compensates for vibrations and oscillations. For this reason, banded belts are frequently used for drives with particularly high impulse or impact loads. ConCar maintains one of the largest band belt warehouses in Europe.

  Select to compare

  Configure now
  Starting from∗ ：	151.37 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  ConCar V-Belt - Profile X13 / AX

  CONCAR

  [Specifications]
  ・Type: open-edge, serrated
  ・Material: Neoprene
  ・Width(mm): 13
  ・Height(mm): 8
  ・Standard: DIN 2215
  
  Raw edge, moulded cogged V-belts (REC) are available - like the wrapped V-belts - as classic V-belts or narrow V-belts. Both belt types are positive engagement, trapezoid drive belts made of neoprene, the force of which is transferred in the edges. Unlike the wrapped V-belts, the raw edge, moulded cogged V-belts have no textile wrapping, but are cogged. Raw edge, moulded cogged ConCar V-belts are delivered as non-varying sets and are used in mechanical engineering, for example.

  Select to compare

  Configure now
  Starting from∗ ：	8.65 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Twin V-Belt - Profile AA

  CONCAR

  [Specifications]
  ・Type: sheathed
  ・Material: Neoprene
  ・Width(mm): 13
  ・Height(mm): 10
  ・Standard: DIN 7722
  
  ConCar Double V-belts are used mainly with agricultural machinery. Due to the edge angles on both sides, several pulleys can be driven in the counter-direction in one drive system. The reference lengths given correspond to the average length.

  Select to compare

  Configure now
  Starting from∗ ：	35.37 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  V-Ribbed Belt - Profile PM

  CONCAR

  [Specifications]
  ・Material: Neoprene
  ・Height(mm): 13
  ・Rib spacing(mm): 9.4
  ・Standard: DIN 7867
  
  ConCar PolyRib ribbed belts – also known as Poly-V belts – are a mixture consisting of flat belts and V-belts, and combine the advantages of both. Essentially, this combination produces the flexibility of a flat belt and the favourable power transfer of a V-belt.

  Select to compare

  Configure now
  Starting from∗ ：	120.60 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Wide Belt - Profile 5MS, Composite Belt

  CONCAR

  [Specifications]
  ・Material: Polyurethane
  ・Width(mm): 5
  ・Height(mm): 3
  ・Angle(°): 60
  
  Wide angle belts are available as individual or combined belts. The low dead weight of these PU belts enables very high belt speeds of up to 60 m/sec. Wide angle belts are resilient against wear, are oil- and ozone-resistant and can withstand numerous different chemicals. The banded belt has very quiet running, and vibrations caused by impact loads or high axial intervals are absorbed.
  ・Wide Belt - Profile 5MS, Composite Belt

  Select to compare

  Configure now
  Starting from∗ ：	49.71 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  V-belt, FO Advance

  CONTITECH

  [Specifications]
  ・Material: Mixture of elastomer
  ・FO Advance
  ・Height(mm): 8, 9, 13
  ・Width(mm): 9.7, 12.7, 16.3

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	8.38 €
  Min. Shipping Days ：	17 Days

  *Unit price with basic configuration

• 

  e-POWER Belt, Wrapped Notch C Type

  MITSUBOSHI BELTING

  Excellent bend tolerance. Less power loss due to bending compared to conventional standard V-belts results in energy-saving effect.

  Select to compare

  Configure now
  Starting from∗ ：	77.33 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Maxstar Multi-Wedge V-Belt, 3V Type

  MITSUBOSHI BELTING

  Unique V-belt with narrow shape and high transmission capabilities. Saves energy, enables compact design. Excellent heat resistance and static electricity prevention.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	45.18 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  V-Belt Red (M Type)

  BANDO

  Uses synthetic rubber for excellent heat and oil resistance. With antistatic performance.
  
  [Features]
  · Low cost per horsepower transmission
  · Widely available.
  · Easy handling.
  · Approximately 60% power-up compared to standard, employing powerful, low elongation polyester cord and special synthetic rubber formulation.
  · Electrical resistance (anti-static performance) is 0.05 to 0.2 MΩ (within the V-belt 216 mm), and US RMA standard approved (rated 6 MΩ or less).
  · Excellent heat, oil and chemical resistance, with flame retardancy.

  Select to compare

  Configure now
  Starting from∗ ：	14.66 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Energy Saving Red (B Type)

  BANDO

  V-belt allows for reduction of power of factory equipment. Pulley replacement is not required.

  Select to compare

  Configure now
  Starting from∗ ：	31.92 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  V Belt Red (C Type)

  BANDO

  Uses synthetic rubber for excellent heat and oil resistance. With antistatic performance.

  Select to compare

  Configure now
  Starting from∗ ：	46.65 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Orange Label V-Belt, RLA Type

  MITSUBOSHI BELTING

  Particularly well-suited to use in agricultural machinery. Thin belt designed to withstand harsher operating conditions than general industrial belts, such as large shocks, small pulley diameters, reverse bending and high temperatures. Excellent heat resistance, flexibility and crack resistance.

  Select to compare

  Configure now
  Starting from∗ ：	13.62 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  ConCar Narrow V-Belt - Profile SPA / AV 13

  CONCAR

  [Specifications]
  ・Type: sheathed
  ・Material: Neoprene
  ・Width(mm): 12.7
  ・Height(mm): 10
  ・Standard: DIN 7753
  
  The wrapped V-belts also include classic V-belts and narrow V-belts in equal measure. Both belt types are positive engagement, trapezoid drive belts made of neoprene with textile wrapping and polyester cord, the force of which is transferred in the edges. Narrow V-belts are, as their name suggests, somewhat narrower, but transfer more power via the edge, since they are higher than classic V-belts. They are mainly used in mechanical engineering.

  Select to compare

  Configure now
  Starting from∗ ：	7.75 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  ConCar Narrow V-Belt - Profile XPB / 5VX

  CONCAR

  [Specifications]
  ・Type: open-edge, serrated
  ・Material: Neoprene
  ・Width(mm): 16.3
  ・Height(mm): 13
  ・Standard: DIN 7753
  
  Raw edge, moulded cogged V-belts (REC) are available - like the wrapped V-belts - as classic V-belts or narrow V-belts. Both belt types are positive engagement, trapezoid drive belts made of neoprene, the force of which is transferred in the edges. Unlike the wrapped V-belts, the raw edge, moulded cogged V-belts have no textile wrapping, but are cogged. Raw edge, moulded cogged ConCar V-belts are delivered as non-varying sets and are used in mechanical engineering, for example.

  Select to compare

  Configure now
  Starting from∗ ：	19.71 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  ConCar Power Belt - Profile 8V / 25J

  CONCAR

  [Specifications]
  ・Material: Neoprene
  ・Height(mm): 25.5
  ・Rib spacing(mm): 28.6
  
  Banded belts consist of several V-belts which are connected to each other via a resilient tie band. The individual belts in the banded belt have the same length and cannot expand in different ways. The connection prevents the belts from twisting sideways or jumping out of the pulley. A banded belt stands out particularly for its even, highly stable power transfer and because it compensates for vibrations and oscillations. For this reason, banded belts are frequently used for drives with particularly high impulse or impact loads. ConCar maintains one of the largest band belt warehouses in Europe.

  Select to compare

  Configure now
  Starting from∗ ：	482.26 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  ConCar V-Belt - Profile 10 / Z

  CONCAR

  [Specifications]
  ・Type: sheathed
  ・Material: Neoprene
  ・Width(mm): 10
  ・Height(mm): 6
  ・Standard: DIN 2215
  
  The wrapped V-belts also include classic V-belts and narrow V-belts in equal measure. Both belt types are positive engagement, trapezoid drive belts made of neoprene with textile wrapping and polyester cord, the force of which is transferred in the edges. Narrow V-belts are, as their name suggests, somewhat narrower, but transfer more power via the edge, since they are higher than classic V-belts. They are mainly used in mechanical engineering.

  Select to compare

  Configure now
  Starting from∗ ：	6.32 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  ConCar V-Belt - Profile 17 / B

  CONCAR

  [Specifications]
  ・Type: sheathed
  ・Material: Neoprene
  ・Width(mm): 17
  ・Height(mm): 11
  ・Standard: DIN 2215
  
  The wrapped V-belts also include classic V-belts and narrow V-belts in equal measure. Both belt types are positive engagement, trapezoid drive belts made of neoprene with textile wrapping and polyester cord, the force of which is transferred in the edges. Narrow V-belts are, as their name suggests, somewhat narrower, but transfer more power via the edge, since they are higher than classic V-belts. They are mainly used in mechanical engineering.

  Select to compare

  Configure now
  Starting from∗ ：	8.53 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  ConCar V-Belt - Profile 8

  CONCAR

  [Specifications]
  ・Type: sheathed
  ・Material: Neoprene
  ・Width(mm): 8
  ・Height(mm): 5
  ・Standard: DIN 2215
  
  The wrapped V-belts also include classic V-belts and narrow V-belts in equal measure. Both belt types are positive engagement, trapezoid drive belts made of neoprene with textile wrapping and polyester cord, the force of which is transferred in the edges. Narrow V-belts are, as their name suggests, somewhat narrower, but transfer more power via the edge, since they are higher than classic V-belts. They are mainly used in mechanical engineering.

  Select to compare

  Configure now
  Starting from∗ ：	6.79 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  PU V-Belt - DVL

  CONCAR

  [Specifications]
  ・Type: not serrated
  ・Material: Polyurethane
  ・Shore hardness(°): 80 Shore A
  ・Colour: Brown
  ・Width(mm): 13
  ・Height(mm): 8
  
  With its large selection of PU V-belts, ConCar offers solution options for all sectors for your conveyance and transport applications. PU V-belts are available in many different profiles, hardness degrees (colours), with and without tension members, and are largely FDA / USDA approved. The range is rounded off by corresponding welding tools, with which you can easily weld these belts. The tools are also available individually.

  Select to compare

  Configure now
  Min. Shipping Days ：	3 Days

• 

  PU V-Belt - VL

  CONCAR

  [Specifications]
  ・Type: not serrated
  ・Material: Polyurethane
  ・Shore hardness(°): 80 Shore A
  ・Colour: Brown
  
  With its large selection of PU V-belts, ConCar offers solution options for all sectors for your conveyance and transport applications. PU V-belts are available in many different profiles, hardness degrees (colours), with and without tension members, and are largely FDA / USDA approved. The range is rounded off by corresponding welding tools, with which you can easily weld these belts. The tools are also available individually.
  ・PU V-Belt - VL

  Select to compare

  Configure now
  Min. Shipping Days ：	3 Days

• 

  PU V-Belt - VLW

  CONCAR

  [Specifications]
  ・Type: not serrated
  ・Material: Polyurethane
  ・Shore hardness(°): 80 Shore A
  ・Colour: Blue
  
  With its large selection of PU V-belts, ConCar offers solution options for all sectors for your conveyance and transport applications. PU V-belts are available in many different profiles, hardness degrees (colours), with and without tension members, and are largely FDA / USDA approved. The range is rounded off by corresponding welding tools, with which you can easily weld these belts. The tools are also available individually.
  ・PU V-Belt - VLW

  Select to compare

  Configure now
  Min. Shipping Days ：	3 Days

• 

  Twin V-Belt - Profile CC

  CONCAR

  [Specifications]
  ・Type: sheathed
  ・Material: Neoprene
  ・Width(mm): 22
  ・Height(mm): 17
  ・Standard: DIN 7722
  
  ConCar Double V-belts are used mainly with agricultural machinery. Due to the edge angles on both sides, several pulleys can be driven in the counter-direction in one drive system. The reference lengths given correspond to the average length.

  Select to compare

  Configure now
  Starting from∗ ：	92.48 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  V-Belt - Profile 47 x 13

  CONCAR

  [Specifications]
  ・Type: open-edge, serrated
  ・Material: Neoprene
  ・Width(mm): 47
  ・Height(mm): 13
  ・Angle(°): 28
  ・Standard: DIN 7719 / ISO 1604
  
  ConCar Vari-Speed variable speed belts are used for high-level force transmission in continuous variable-speed gears. Structured as an open-flank, moulded cogged V-belt with an additional fibre-reinforced elastomer layer, a variable speed belt ensures high stability and increases transverse rigidity. Due to the change in the pulley width, a continuous speed regulation of the drive is possible. ConCar can cut standard variable speed belts to a required width (from approx. 1-2 mm possible). The flank angle required can be set accordingly during cutting with a tolerance of +/- 1 degree. Cutting to size: +20 % added charge

  Select to compare

  Configure now
  Starting from∗ ：	79.26 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  V-Ribbed Belt - Profile TB2

  CONCAR

  [Specifications]
  ・Material: Polyurethane
  ・Height(mm): 2.2
  ・Rib spacing(mm): 2
  
  Ribbed belts – also known as Poly-V belts – are a mixture consisting of flat belts and V-belts, and combine the advantages of both. Essentially, this combination produces the flexibility of a flat belt and the favourable power transfer of a V-belt.

  Select to compare

  Configure now
  Starting from∗ ：	7.07 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Wide Belt - Profile 11M, Single Belt

  CONCAR

  [Specifications]
  ・Material: Polyurethane
  ・Width(mm): 11
  ・Height(mm): 7
  ・Angle(°): 60
  
  Wide angle belts are available as individual or combined belts. The low dead weight of these PU belts enables very high belt speeds of up to 60 m/sec. Wide angle belts are resilient against wear, are oil- and ozone-resistant and can withstand numerous different chemicals. The banded belt has very quiet running, and vibrations caused by impact loads or high axial intervals are absorbed.
  ・Wide Belt - Profile 11M, Single Belt

  Select to compare

  Configure now
  Starting from∗ ：	55.46 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Wide Belt - Profile 11MS, Composite Belt

  CONCAR

  [Specifications]
  ・Material: Polyurethane
  ・Width(mm): 11
  ・Height(mm): 7
  ・Angle(°): 60
  
  Wide angle belts are available as individual or combined belts. The low dead weight of these PU belts enables very high belt speeds of up to 60 m/sec. Wide angle belts are resilient against wear, are oil- and ozone-resistant and can withstand numerous different chemicals. The banded belt has very quiet running, and vibrations caused by impact loads or high axial intervals are absorbed.
  ・Wide Belt - Profile 11MS, Composite Belt

  Select to compare

  Configure now
  Starting from∗ ：	113.62 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Super HC MN

  GATES

  · Excellent performance/cost ratio
  · More compact design compared to classical section V-belts
  · Cost and space savings by reducing size of pulleys, bearings, guards and mounts
  · Improved belt life reducing expensive maintenance time
  · Match system: all sizes meet Gates UNISET tolerances, they can be installed without matching
  · REACH and RoHS 2 compliant
  · Temperature range: -30°C to +60°C

  Select to compare

  Configure now
  Starting from∗ ：	10.51 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Twin Power

  GATES

  · High loading capacity
  · Twin Power™ can transmit up to 100% of its maximum rated load from either side of the belt; alternatively, it can transmit a load on both sides - provided the sum of the loads does not exceed the maximum capacity
  · Non-slip positive drive
  · Running at low noise
  · Free of lubrication and maintenance
  · Temperature range: -30°C to +100°C

  Select to compare

  Configure now
  Starting from∗ ：	76.19 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Powerband, Super HC

  GATES

  · Excellent performance/cost ratio
  · More compact design compared to classical section V-belts
  · Cost and space savings by reducing size of pulleys, bearings, guards and mounts
  · Improved belt life reducing expensive maintenance time
  · Match system: all sizes meet Gates UNISET tolerances, they can be installed without matching
  · REACH and RoHS 2 compliant
  · Temperature range: -30°C to +60°C

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	39.32 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  V-belt, Predator

  GATES

  · At least 40% higher power ratings than standard construction V-belts
  · No need for constant belt re-tensioning: less maintenance, less downtime
  · Excellent problem solver
  · Static conductive (ISO 1813 - with the exception of 8VP) and can as such be used in the conditions described in the Directive 2014/34/EU- ATEX
  · Available on demand in Matched sets. Contact Customer Service for details
  · REACH and RoHS 2 compliant
  · Temperature range: -30°C to +60°C

  Select to compare

  Configure now
  Starting from∗ ：	49.92 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  V-belt, Truflex

  GATES

  [Specifications]
  ・Material: mixture of elastomer
  ・Length(mm): 737
  ・Height(mm): 3.175
  ・Width(mm): 6.35
  
  Light-duty Sheaves-bored-to-size, Light-duty Sheaves-bushed, Light-duty Sheaves-vaniable Pitch

  Select to compare

  Configure now
  Starting from∗ ：	29.75 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  V-belt, VulcoPower

  GATES

  [Specifications]
  ・Length(mm): 980
  ・Height(mm): 8
  ・Width(mm): 13
  
  Gates V-belts are engineered to run maintenance-free to keep your vehicles moving without the need for lubrication or retensioning. V-belts are wear, corrosion, and heat resistance with OE quality fit and construction for reliable, long-lasting performance.

  Select to compare

  Configure now
  Starting from∗ ：	35.18 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  VulcoPlus, V-belt

  GATES

  [Specifications]
  ・Material: mixture of elastomer
  ・Height(mm): 8
  ・Width(mm): 10
  
  Gates V-belts are engineered to run maintenance-free to keep your vehicles moving without the need for lubrication or retensioning. V-belts are wear, corrosion, and heat resistance with OE quality fit and construction for reliable, long-lasting performance

  Select to compare

  Configure now
  Starting from∗ ：	28.08 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  V-belt, Conti-V

  CONTITECH

  [Specifications]
  ・Material: Mixture of elastomer
  ・Height(mm): 8, 13
  ・Width(mm): 9.7, 12.7, 20

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	8.63 €
  Min. Shipping Days ：	17 Days

  *Unit price with basic configuration

• 

  Pluriband

  MEGADYNE

  Banded version of Megadyne V-Belt, PLURIBAND eliminates belt whip and twist on wedge-type drives. They ensure smoothest and strongest operation.

  Select to compare

  Configure now
  Starting from∗ ：	504.51 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  e-POWER WEDGE, 3V Type

  MITSUBOSHI BELTING

  [Features]
  · V-belt with unique narrow shape and energy-saving effect.
  · Notch shape for excellent flexibility and reduced power consumption.
  · Special pulley not required. Just replace the belt on a conventional pulley for reduced power consumption

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	25.02 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

Loading...