Contact switches（Type：Anglular Misalignment Tolerant Type）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
CS-Touch Switch for Angled Touch CSH
METROL
[Features]
A linear bushing is used for the bearing· and it is applicable to sliding, deflection and off-set- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 73.06 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Heat-Resistant Switch HT Series
METROL
[Features]
The maximum temperature for continuous operation lies at 150°C/200°C
Plastic parts that are heat-resistant, adhesives for high temperature and heat-resistant chord have been used.- Volume Discount
Configure nowStarting from∗ ： 168.06 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Contact Switches / Wide Contact Angle Type
MISUMI
Ball bearings allow contact from all directions.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 66.13 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Stopper Mini with Attached Switch STM
METROL
[Features]
A mini switch of ø8×8 mm, that is small in size, having quench stopper.
· Suitable for confined spaces
· Miniaturization of equipment and appliance which is cost-effective
· For straight and deflected angle
· The movable part will move frictionless on the flat spring and hence galling of the movable parts does not occur.
· The waterproof type (IP67) is not only for the movable part, but the surface of the stopper and the interior of the rubber boot is also dust proof.
· The standard size of the mounted parts is so accurate that replacement is very easy.- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 37.69 € Special price Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
CS-Touch Switch Waterproof Type for Angled Touch CSHP
METROL
[Features]
· M8 ultra-fine. Positioning at the deflected angle with waterproof specifications.- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 98.12 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
2-class Discrimination Switches CSC
METROL
[Features]
· Low cost and also useful in determining the defective products.
· Cost effective since sequencer is not required.
· The range that has been approved can also be adjusted.- Volume Discount
Configure nowStarting from∗ ： 190.49 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days |
| Type |
| Main Body Shape |
| Contact Section Type |
| Environment |
| Body Material |
| Contact Material |
| Contact Stroke S(mm) |
| Contact Point Type |
| Cylinder Part O.D. D(mm) |
| Mounting Screw Nominal M |
| Switch Operating Point P(mm) |
| Repeatability |
| Contact Part O.D. |
|
|
|
|
|
| |
| Brand | METROL | METROL | MISUMI | METROL | METROL | METROL |
| Product Series | ||||||
| CAD |
|
|
|
| ||
| Starting from∗ | 73.06 € *Unit price with basic configuration Volume Discount | 168.06 € *Unit price with basic configuration Volume Discount | 66.13 € *Unit price with basic configuration Volume Discount | 37.69 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 98.12 € *Unit price with basic configuration Volume Discount | 190.49 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days | Same day | 5 Days | Same day | 5 Days | 5 Days | 5 Days |
| Type | Anglular Misalignment Tolerant Type | Anglular Misalignment Tolerant Type | Anglular Misalignment Tolerant Type | Anglular Misalignment Tolerant Type | Anglular Misalignment Tolerant Type | Anglular Misalignment Tolerant Type |
| Main Body Shape | Screw Type | Screw Type | Screw Type | Screw Type / Cylindrical Shape | Screw Type | Cylindrical Shape |
| Contact Section Type | Dome | Needle Type | Dome | Needle Type | Needle Type | Needle Type |
| Environment | Standard | Heat Resistant | Standard | Drip-Proof | Waterproof | Waterproof |
| Body Material | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel |
| Contact Material | Stainless Steel | - | Stainless Steel | - | Stainless Steel | Carbide |
| Contact Stroke S(mm) | 2.8 | 0.8 | 2.8 | 0.5 | 2.8 | 3 |
| Contact Point Type | Contact Point Normally Open / Contact Point Normally Closed | Contact Point Normally Open | Contact Point Normally Open | Contact Point Normally Open | Contact Point Normally Open / Contact Point Normally Closed | - |
| Cylinder Part O.D. D(mm) | - | - | - | 8 | - | - |
| Mounting Screw Nominal M | M12x1.0 (Fine) | M6x1.0 (Coarse) | M12x1.0 (Fine) | M10x0.75 (Fine) | M8 x 0.5 (Fine) | - |
| Switch Operating Point P(mm) | 0.3 | 0.5 | 0.3 | 0.25 | 0.3 | 0.3 |
| Repeatability | 5μm or Less | 0.01mm or Less | 5μm or Less | 0.01mm or Less | 5μm or Less | 3μm or Less |
| Contact Part O.D. | Up to Ø10 | Up to Ø4 | Up to Ø10 | Up to Ø4 | - | Up to Ø2 |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Type
-
Main Body Shape
-
Contact Section Type
- Flat Type
- Needle Type
- Dome
-
Environment
- Standard
- Drip-Proof
- Waterproof
- Heat Resistant
- Vacuum
-
Body Material
- Stainless Steel
- Resin
- Aluminum
- Zinc Alloy
- BsBM Ni plating
-
Contact Material
- Stainless Steel
- Polyacetal
- Carbide
-
Contact Stroke S(mm)
-
Contact Point Type
- Contact Point Normally Open
- Contact Point Normally Closed
- No Contact Point, PNP Open Collector
-
Cylinder Part O.D. D(mm)
-
Mounting Screw Nominal M
-
Switch Operating Point P(mm)
-
Repeatability
-
Contact Part O.D.
Brand
CAD data type
-
- 2D
- 3D
Categories related to Contact switches
Fizetési mód
Átutalás
Előre fizetés
Igény szerinti gyártás
Tanúsítványok
Copyright © MISUMI Corporation Minden jog fenntartva.