Push-Down Workpiece Clamps（Material：Steel）

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 2 Days or Less 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 8 Days or Less 9 Days or Less 14 Days or Less 18 Days or Less

?* Information on days to ship and prices

Spring Clamp Large

MISUMI

[The spring force clamps the workpiece from above.

Volume Discount

Order quantities extended (D-JIT)

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	30.25 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Spring Clamps Small

MISUMI

[Features] The spring force clamps the workpiece from above.

Volume Discount

Order quantities extended (D-JIT)

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	22.13 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Snap Clamp (Down Mini Type) (QLSNDM)

IMAO CORPORATION

Down press type compact spring clamp force of 10N to 30N for light-duty work.

[Features]
· Down press type.
· Compact and small sized hook, ideal for use in small spaces.
· Finger tip operation fitting lever shape
· In unclamped position lever is fixed.
· Employs snap system. (Rotating arm single lock type)

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	68.64 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Screw Jacks / screw jack

HALDER

Trapezoidal self-locking thread, spindle with final safety device. The holders, which can be secured by means of the T-slots, make it possible to tighten the jacks so that they will not slip out of position when a workpiece is changed. They also allow to fit screw jacks to vertical clamping surfaces. Screw jacks are frequently used for supporting workpieces. Use of the self-aligning cap ensures a correctly aligned bearing surface. Using the centering plate as an intermediate element, it is possible to fit a number of screw jacks sizes 52, 70 and 100 together one above the other.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	9.86 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Clamping Element Systems

HALDER

[Specifications]
・Type: Hold Down Type
・Arm Height Type: Standard
・Material: Steel
・Wearing parts: Heat-treated steel

Clamping Element Systems.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	277.57 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Promotional pricing

Clamps, with soft face

HALDER

The brass plate protects the workpiece from damage. The combination of nut DIN 6330 B (EH 23070.)/conical seat DIN 6319 G (EH 23050.) on the clamping bolt and thrust pad DIN 6311 (EH 22560. removable) on the adjusting screw compensates for the lack of parallelity. The clamp can be used either way (soft or hard clamping surface).

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	23.21 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Bedding Supports

HALDER

The bedding support is used to support additional clamping points on components.
The benefits of the bedding support are:
- provides additional support without distortion
- helps to eliminate tool vibration
- compact, low construction
- supports ribs, beads and shackles to reinforce clamped components
- distortion-free support of raw parts
- easy handling - clamping outside of workpiece is also possible by means of adjustable clamping levers.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	228.52 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Down-Thrust Clamps, size 82,5

HALDER

The down-thrust clamp is a universal mechanical clamp that allows fast and easy exchange and clamping of workpieces - as the clamping head can be easily manually swivelled to clear the workpiece.
The down-thrust clamps provide the following advantages:

- compact footprint
- clamping force of up to max. 30 kN via a clamping screw WS 36
- clamping head swivels 360°
- clamping stroke 30 mm
- clamping height max. 250 mm
- integrated clamping height stop for safe use
- fixture via 4 cap screws M 24, quality 8.8 (tightening torque 600 Nm) with a hole spacing of 100 x 100 mm

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	1,674.21 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Absorbing Pusher Pins

MISUMI

[Features] It is attached to the tip of the cylinder and gently clamps the workpiece.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	25.31 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Promotional pricing

Clamps, DIN 6314 flat

HALDER

Heat-treated steel, varnished.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	6.84 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Clamps, DIN 6316 with goose-neck

HALDER

Heat-treated steel, varnished.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	13.63 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Supporting Elements

HALDER

The support element is used to support additional clamping points on components.
The benefits of the support element are:
- provides additional support without distortion
- helps to eliminate tool vibration
- supports ribs, beads and shackles to reinforce clamped components
- distortion-free support of raw parts

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	839.60 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Swing Clamp (QLSW)

IMAO CORPORATION

Toolless clamp that clamps with rotating hook by lever operation. With lever, without lever, without hook / lever available. Both right and left rotational specifications available. This series CAD data is being revised. These revisions will be completed soon.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	219.48 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Clamps, DIN 6315 B forked

HALDER

Heat-treated steel, varnished.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	8.83 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Clamps, with flat-faced ball

HALDER

Ball protected against rotating.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	26.68 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Floating Clamps, combined clamping and locking M 12

HALDER

The floating clamp is used to clamp and support additional clamping points on components.
The benefits of the floating clamp are:
- avoids vibration during the processing
- clamps ribs, beads and shackles to reinforce clamped components
- distortion-free clamping of raw parts.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	924.28 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Clamping Elements

HALDER

Used as clamps in conventional fixtures. A reamed hole is provided in the body of the fixture. The hole depth has to be adapted to the desired clamping height. To provide a counter force, a support can be placed against the rounded end of the clamp (radius 22). This support can be flat, half-rounded or V-shaped. Clamping is achieved by means of a DIN 933 hexagon screw.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	216.59 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Intermediate Elements, with support

HALDER

[Specifications]
・Type: Peripherals
・Material: Steel
・a(mm): 50, 60
・b1(mm): 25, 30

Intermediate Elements, with support

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	186.05 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Promotional pricing

Loose Slot Tenons, DIN 6323

HALDER

To be used for locating fixtures and clamping elements onto machine tables with T-slots to DIN 650.
Being simply pushed into position after fixture or clamping element has been roughly positioned, they cannot cause damage to the machine as could protruding fixed slot tenons or low slot tenons.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	21.12 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Swing Clamp (Cam Lever Type) (QLSWC)

IMAO CORPORATION

Toolless clamp with rotating hook by lever operation. Cam lever type. Black electroless nickel plating specification available. Both right and left rotational specifications available. This series CAD data is being revised. These revisions will be completed soon.

Volume Discount

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	119.94 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Clamps, stepped

HALDER

Heat-treated steel, tempered, blackened.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	40.85 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Clamps, with nose, closed

HALDER

Thanks to the closed slot, the clamp is suitable for an application with rotating workpieces.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	102.83 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Promotional pricing

Clamps, with nose

HALDER

Heat-treated steel, tempered, blackened.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	23.21 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Clamps, slotted, with adjustable counter piece

HALDER

The thrust pad and the counter element are connected with the clamp and therefore secured against loss. Consequently, the clamp is quickly ready for use. The clamp is equipped with two flat noses and can be turned around depending on the case of application.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	89.78 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Clamps, slotted, with adjustable counter piece, with T-Bolt

HALDER

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	104.11 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Clamps, slotted, with adjustable counter piece, with stud

HALDER

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	101.90 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Clamps, slotted, with adjustable counter piece, with stud with internal hexagon

HALDER

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	111.53 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Support Extensions, for straight clamps, slotted, with adjustable counter piece

HALDER

The support extension is screwed on the counter piece of the clamp EH 23185. for an extension of the clamping height (dimension h2). The clamping height can be adjusted stepless by means of the support extension.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	29.81 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Floating Clamps, separate clamping and locking M 12

HALDER

Floating clamps with seperate clamp and locking are used to clamp and support additional clamping points on extremly pliable workpieces. Both, clamping and supporting force can individually be designed.
The benefits of the floating clamp are:
- avoids vibration during the processing
- clamps ribs, beads and shackles to reinforce clamped components
- distortion-free clamping of raw parts.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	1,018.60 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Floating Clamps, combined clamping and locking M 16

HALDER

The floating clamp is used to clamp and support additional clamping points on components.
The benefits of the floating clamp are:
- especially suitable for large workpieces
- avoids vibration during the processing
- clamps ribs, beads and shackles to reinforce clamped components
- distortion-free clamping of raw parts

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	1,649.52 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Clamping Jaws, for floating clamp M 12

HALDER

The clamping jaws can be used for floating clamps 23320.0012 and 23320.0014 to increase the clamping range.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	70.14 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Clamping Jaws, for floating clamp M 16

HALDER

The clamping jaws can be used for the floating clamp 23320.0016 to increase or decrease the clamping range.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	116.24 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Compact Clamps

HALDER

The compact clamps are all purpose clamping elements. Due to the self-locking clamping lever application can either take place in horizontal or vertical position in both, machined and raw workpieces.
Features:
- exact and position precise clamping
- ease of operation
- high clamping force at low tightening torques, abrasion-resistant due to clamping lever with bearings
- continuous, large clamping area
- clamping lever entirely retractable for hindrance-free exchange of workpieces
- threaded clamping lever can be used with many clamping elements, e.g. ball-ended thrust screws (EH 22700. - EH 22720.), self-aligning pads (EH 22730./EH 22740.) etc.
- large adjusting range at constant clamping force
- continuous height adjustment by height adaptors 23690.0112/.0116
- easy and flexible set up
- corrosion-resistant
- resistent to dirt and chips

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	297.88 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Height Adaptors, for compact clamp

HALDER

The height adaptors for compact clamps allow for a clamping height increase and have the following characteristics:
- continuous covering of clamping height
- height adaptor allows an exact positioning of compact clamp at designated slot distances
- height can optionally be expanded

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	120.75 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Straight Clamps, short

HALDER

[Specifications]
・Type: Hold Down Type
・Material: Heat Treatment Steel
・a(mm): 20, 30

Straight Clamps, short.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	38.52 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Straight Clamps, long

HALDER

[Specifications]
・Type: Hold Down Type
・Material: Heat Treatment Steel
・a(mm): 20, 30
・b1(mm): 12.5, 17

Straight Clamps, long

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	54.00 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Intermediate Elements

HALDER

[Specifications]
・Type: Peripherals
・Material: Steel
・a(mm): 25~240
・b1(mm): 25, 30

Intermediate Elements.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	121.56 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Base Elements

HALDER

[Specifications]
・Type: Peripherals
・Material: Steel
・a(mm): 30, 40
・b1(mm): 25, 30

Base Elements.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	132.36 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Base Elements, swivelling

HALDER

[Specifications]
・Type: Peripherals
・Material: Steel
・a(mm): 29.7, 39.7
・b(mm): 88, 105

Base Elements, swivelling.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	348.34 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Base Elements, low

HALDER

[Specifications]
・Type: Peripherals
・Material: Steel
・a(mm): 12
・b(mm): 30

Base Elements, low.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	125.27 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Base Elements, for location hole

HALDER

[Specifications]
・Type: Peripherals
・Material: Steel
・a(mm): 8, 12
・b(mm): 25, 30

Base Elements, for location hole.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	89.09 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Base Plates

HALDER

[Specifications]
・Material: Grey cast iron, Steel, case-hardened
・a(mm): 150, 200, 300
・b(mm): 100~800
・For screw: M12, M16

Base Plates.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	2,614.33 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Base Plates, overall dimensions same as pallets DIN 55 201

HALDER

[Specifications]
・Material: Steel, case-hardened
・a(mm): 100
・For screw: M12, M16
・System: V40, V70

Base Plates, overall dimensions same as pallets DIN 55 201.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	3,943.53 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Connecting Elements, hydraulically operated, double acting, with lifting-off and blow-out

HALDER

[Specifications]
・Material: Steel, case-hardened
・Release pressure to(bar): 80
・Release pressure of(bar): 60
・Holding force(N): 30000

Connecting Elements, hydraulically operated, double acting, with lifting-off and blow-out.

Select to compare

Configure now
Starting from^∗ ：	853.10 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Connecting Elements, hydraulically operated, single acting with lifting-off

HALDER

[Specifications]
・Material: Steel, case-hardened
・Release pressure to(bar): 80
・Release pressure of(bar): 60
・Holding force(N): 20000

Connecting Elements, hydraulically operated, single acting with lifting-off.

Select to compare

Configure now
Starting from^∗ ：	1,189.76 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration


Brand
Product Series
CAD
Starting from^∗
Min. Shipping Days
Specifications
Tightening Force (Range Selectable)(N)
Material
Type
Type
Applicable Tightening Force(N)
Stroke S(mm)
Arm Height Type
Arm Length Type

	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	MISUMI	MISUMI	IMAO CORPORATION	HALDER	HALDER	HALDER	HALDER	HALDER	MISUMI	HALDER	HALDER	HALDER	IMAO CORPORATION	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	IMAO CORPORATION	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER
Product Series	Spring Clamp Large	Spring Clamps Small	Snap Clamp (Down Mini Type) (QLSNDM)	Screw Jacks / screw jack	Clamping Element Systems	Clamps, with soft face	Bedding Supports	Down-Thrust Clamps, size 82,5	Absorbing Pusher Pins	Clamps, DIN 6314 flat	Clamps, DIN 6316 with goose-neck	Supporting Elements	Swing Clamp (QLSW)	Clamps, DIN 6315 B forked	Clamps, with flat-faced ball	Floating Clamps, combined clamping and locking M 12	Clamping Elements	Intermediate Elements, with support	Loose Slot Tenons, DIN 6323	Swing Clamp (Cam Lever Type) (QLSWC)	Clamps, stepped	Clamps, with nose, closed	Clamps, with nose	Clamps, slotted, with adjustable counter piece	Clamps, slotted, with adjustable counter piece, with T-Bolt	Clamps, slotted, with adjustable counter piece, with stud	Clamps, slotted, with adjustable counter piece, with stud with internal hexagon	Support Extensions, for straight clamps, slotted, with adjustable counter piece	Floating Clamps, separate clamping and locking M 12	Floating Clamps, combined clamping and locking M 16	Clamping Jaws, for floating clamp M 12	Clamping Jaws, for floating clamp M 16	Compact Clamps	Height Adaptors, for compact clamp	Straight Clamps, short	Straight Clamps, long	Intermediate Elements	Base Elements	Base Elements, swivelling	Base Elements, low	Base Elements, for location hole	Base Plates	Base Plates, overall dimensions same as pallets DIN 55 201	Connecting Elements, hydraulically operated, double acting, with lifting-off and blow-out	Connecting Elements, hydraulically operated, single acting with lifting-off
CAD	2D / 3D	2D / 3D	3D	3D	3D	3D	3D	3D	2D / 3D	3D	3D	3D	3D	3D	3D	3D	3D	3D	3D	3D	3D	3D	3D	3D	3D	3D	3D	3D	3D	3D	3D	3D	3D	3D	3D	3D	3D	3D	3D	3D	3D	3D	3D
Starting from^∗	30.25 € *Unit price with basic configuration Volume Discount	22.13 € *Unit price with basic configuration Volume Discount	68.64 € *Unit price with basic configuration	9.86 € Special price *Unit price with basic configuration Promotional pricing	277.57 € *Unit price with basic configuration	23.21 € Special price *Unit price with basic configuration Promotional pricing	228.52 € *Unit price with basic configuration	1,674.21 € *Unit price with basic configuration	25.31 € *Unit price with basic configuration Volume Discount	6.84 € Special price *Unit price with basic configuration Promotional pricing	13.63 € Special price *Unit price with basic configuration Promotional pricing	839.60 € *Unit price with basic configuration	219.48 € *Unit price with basic configuration	8.83 € Special price *Unit price with basic configuration Promotional pricing	26.68 € Special price *Unit price with basic configuration Promotional pricing	924.28 € *Unit price with basic configuration	216.59 € *Unit price with basic configuration	186.05 € *Unit price with basic configuration	21.12 € Special price *Unit price with basic configuration Promotional pricing	119.94 € *Unit price with basic configuration Volume Discount	40.85 € Special price *Unit price with basic configuration Promotional pricing	102.83 € *Unit price with basic configuration	23.21 € Special price *Unit price with basic configuration Promotional pricing	89.78 € *Unit price with basic configuration	104.11 € *Unit price with basic configuration	101.90 € *Unit price with basic configuration	111.53 € *Unit price with basic configuration	29.81 € *Unit price with basic configuration	1,018.60 € *Unit price with basic configuration	1,649.52 € *Unit price with basic configuration	70.14 € *Unit price with basic configuration	116.24 € *Unit price with basic configuration	297.88 € *Unit price with basic configuration	120.75 € *Unit price with basic configuration	38.52 € *Unit price with basic configuration	54.00 € *Unit price with basic configuration	121.56 € *Unit price with basic configuration	132.36 € *Unit price with basic configuration	348.34 € *Unit price with basic configuration	125.27 € *Unit price with basic configuration	89.09 € *Unit price with basic configuration	2,614.33 € *Unit price with basic configuration	3,943.53 € *Unit price with basic configuration	853.10 € *Unit price with basic configuration	1,189.76 € *Unit price with basic configuration
Min. Shipping Days	Same day	Same day	6 Days	Same day	3 Days	Same day	3 Days	4 Days	5 Days	Same day	Same day	4 Days	6 Days	Same day	Same day	4 Days	3 Days	3 Days	Same day	6 Days	Same day	3 Days	Same day	3 Days	3 Days	3 Days	3 Days	3 Days	4 Days	4 Days	3 Days	4 Days	3 Days	3 Days	3 Days	3 Days	3 Days	3 Days	3 Days	3 Days	3 Days	3 Days	3 Days	3 Days	3 Days
Specifications	Order quantities extended (D-JIT)	Order quantities extended (D-JIT)
Tightening Force (Range Selectable)(N)	up to 8.5 / up to 5.1	Up to 100	Up to 100	-	-	-	-	-	Up to 100	-	-	-	100 to 1000 / 1000 to 3000	-	-	-	-	-	-	100 to 1000 / 1000 to 3000	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Material	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel
Type	Main Body	Main Body	Main Body	Optional Components	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	-	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	Main Body	-	-	-	-
Type	-	-	-	Peripheral Components	Hold Down Type	Hold Down Type	Push-Pull Free Mounting Direction Type	Hold Down Type	-	Hold Down Type	Hold Down Type	Hold Down, Horizontal Handle	-	Hold Down Type	Hold Down Type	Push-Pull Free Mounting Direction Type	Hold Down Type	Peripheral Components	Peripheral Components	-	Hold Down Type	Hold Down Type	Hold Down Type	Hold Down Type	Hold Down Type	Hold Down Type	Hold Down Type	Peripheral Components	Push-Pull Free Mounting Direction Type	Push-Pull Free Mounting Direction Type	Peripheral Components	Peripheral Components	Hold Down Type	Peripheral Components	Hold Down Type	Hold Down Type	Peripheral Components	Peripheral Components	Peripheral Components	Peripheral Components	Peripheral Components	-	-	-	-
Applicable Tightening Force(N)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Stroke S(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Arm Height Type	-	-	-	-	Standard	-	-	-	-	-	-	-	-	-	-	Standard	-	-	-	-	-	-	-	-	-	-	-	-	Standard	Standard	-	-	Standard	-	-	-	-	-	-	-	-	-	-	-	-
Arm Length Type	-	-	-	-	-	-	-	-	-	Standard	Standard	-	-	Standard	Standard	-	-	-	-	-	Standard	Standard	Standard	Standard	Standard	Standard	Standard	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-