Locating Units（Page 2）

?* Information on days to ship and prices

• 

  Clamping plates recessed for quarter-turn clamp locks (05592)

  NORELEM

  · Form B mounting option for plate thickness over 10 mm
  
  · Fastening screws included

  Select to compare

  Configure now
  Starting from∗ ：	18.30 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Locating cylinder with quick clamping system (03153)

  NORELEM

  · Fast opening and closing
  
  · Mechanical positioning and clamping system
  
  · Various sizes
  
  · High retaining forces
  
  · For different thicknesses of clamping plate

  Select to compare

  Configure now
  Starting from∗ ：	133.05 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Locating pins removable Form B (K0818)

  KIPP

  · Hardened
  
  · Ground

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	13.40 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  UNILOCK interchangeable subplates for zero-point clamping system (K1218)

  KIPP

  · For rapid changes on zero-point clamping systems
  
  · Can be machined to customer specifications
  
  · Ground both sides
  
  · High-strength aluminium

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	359.95 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Index Mechanism_LXY-B / C

  NABEYA BI-TECH

  [Features]
  · Index mechanism with lever.
  · Excellent operability.
  · LXY‐B-single lever.
  · LXY‐C-doubnle lever.
  · 6° and the adjustment multiple angle, that is 2, 3, 5, 6, 10, 12, 15, 20, 30 can be positioned.
  · Mechanism with superior durability with positioning etc. by pin providing accuracy unobtainable with other methods.
  · Scales and symbol marks can be engraved.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	183.40 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Indexing levers, Steel

  GANTER

  With indexing levers GN 215 shafts can be turned through a predetermined angle and positively locked. To index, lift the lever against spring pressure from serrations (one hand control).
  Limiting the indexing angle can be achieved with two dowels (sketch).
  The bushing is connected to the shaft via keyway.
  The location flange is bolted to the machine with two socket head cap screws (M 5).
  
  The lever, via the location pin, provides the connection between shaft and location flange.
  The serrations are protected from swarf and similar particles by the cover. This cover can be inserted by hand (elastic segments engage into a groove) and removed with a screw driver.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	107.26 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Installation kits for position indicators

  GANTER

  The GN 296 installation kits are needed for mounting a position indicator on linear units. The installation kits comprise an adapter shaft and a torque support including attachment screws.
  Order mechanical position indicators GN 953 / GN 954 / GN 955 with a counter pitch that corresponds to that of the trapezoidal threaded spindle.
  For position indicators GN 9053 / GN 9054, the position indicator pitch is programmed.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	90.62 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Stainless Steel-Tension levers

  GANTER

  Stainless Steel-Tension levers GN 212 are used as clamping element as well as operating levers.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	19.32 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Electric return stop

  ASUTEC

  Return stops are used in low-friction transfer systems (eg with accumulation roller chain). They prevent rebounding of the workpiece carrier from the separator in the stopping process. Rebounding the workpiece carriers leads to complications in the control of the workpiece carriers since the workpiece carrier is temporarily not at the presumed position. In addition, rebounding has a negative effect on the cycle time, and the components of the transfer system are more strongly loaded by the multiple impact of the workpiece carrier on the separator. Retrun stops may not be used to stop the workpiece carriers in the conveying direction. During transport ot the workpiece carrier in regular transport direction, the pawl of the return stop is pressed down by the workpiece carrier when moving over it.Retrun stops "ASREL" can be lowered electrically for the reversing operation of the conveyor.

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	455.36 €
  Min. Shipping Days ：	15 Days

  *Unit price with basic configuration

• 

  Pneumatic separator for roller conveyor system without damping

  ASUTEC

  The separator from ASUTEC for roller conveyor systems have the advantage that they can be usedfor direct integration into roller conveyors because of the specially developed slim design. These separators stop one or more accumulated workpiece carriers on the defined workpiece carrier stop plate in roller conveyor systems. Especially useful are the separator for tight installation spaces between the rollers. The concept developed by Asutec with extreme stability and high resistance to contamination makes these separators universally applicable. For all ASUTEC separators for roller conveyor systems, it is possible to query the upper and the lowered position with inductive proximity switches.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	424.70 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Cable fasteners stainless steel or plastic in Hygienic DESIGN, cable gland (K1453)

  KIPP

  [Specifications]
  ・Main material: plastic, stainless steel
  ・Component material: silicon
  ・Component colour: blue
  
  Cable fasteners stainless steel or plastic in Hygienic DESIGN, cable gland (K1453)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	9.53 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Quarter turn latches, with cross head (K1730)

  KIPP

  · Small lock with high tensile strength
  
  · Opened or closed with a quarter turn
  
  · Vibration-resistant and tolerance-compensating
  
  · Loss-proof (according to mechanical engineering directive)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2.82 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Repair kit (K0935)

  KIPP

  [Features]
  ・Locating cylinder carbon steel.
  ・Balls roller bearing steel.
  ・Locating cylinder tempered, black oxidised. Balls hardened, bright.

  Select to compare

  Configure now
  Starting from∗ ：	11.80 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Quarter turn latches, with star grip (05592)

  NORELEM

  · Small lock with high tensile strength
  
  · Opened or closed with a quarter turn
  
  · Vibration-resistant and tolerance-compensating
  
  · Loss-proof (according to mechanical engineering directive)

  Select to compare

  Configure now
  Starting from∗ ：	6.98 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Quarter turn latches, with knurled head (05592)

  NORELEM

  · Small lock with high tensile strength
  
  · Opened or closed with a quarter turn
  
  · Vibration-resistant and tolerance-compensating
  
  · Loss-proof (according to mechanical engineering directive)

  Select to compare

  Configure now
  Starting from∗ ：	6.98 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Quarter turn latches, with cross head (05592)

  NORELEM

  · Small lock with high tensile strength
  
  · Opened or closed with a quarter turn
  
  · Vibration-resistant and tolerance-compensating
  
  · Loss-proof (according to mechanical engineering directive)

  Select to compare

  Configure now
  Starting from∗ ：	3.46 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Clamping plates steel for quarter-turn clamp locks (05592)

  NORELEM

  · Fastening screws included
  
  · Mounting option for plate thickness starting from 9 mm
  
  · Accessory for quarter-turn clamp lock 05592-10

  Select to compare

  Configure now
  Starting from∗ ：	19.29 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Quarter-turn clamp locks stainless steel, knob stainless steel (05592)

  NORELEM

  · High clamping forces up to 400 N
  
  · Ideal where space is restricted:
  
  · Click signal when locked
  
  · Fastening screws included
  
  · Mounting option for plate thickness 6 to 20 mm

  Select to compare

  Configure now
  Starting from∗ ：	88.60 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Quarter-turn clamp locks stainless steel, knob plastic (05592)

  NORELEM

  · High clamping forces up to 400 N
  
  · Ideal where space is restricted:
  
  · Click signal when locked
  
  · Fastening screws included
  
  · Mounting option for plate thickness 6 to 20 mm

  Select to compare

  Configure now
  Starting from∗ ：	77.24 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Quarter-turn clamp lock steel, rotary knob stainless steel (05591-05)

  NORELEM

  · Locking element for connecting two separate plates
  
  · With retractable shank, ideal for places where space is limited
  
  · Click signal when locked
  
  · Mounting option for plate thickness 6 to 14 mm
  
  · Fastening screws included

  Select to compare

  Configure now
  Starting from∗ ：	77.24 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Quarter-turn clamp lock steel, rotary knob plastic (05591-05)

  NORELEM

  · Locking element for connecting two separate plates
  
  · With retractable shank, ideal for places where space is limited
  
  · Click signal when locked
  
  · Mounting option for plate thickness 6 to 14 mm
  
  · Fastening screws included

  Select to compare

  Configure now
  Starting from∗ ：	43.15 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Quarter-turn clamp locks stainless steel, knob plastic (05591)

  NORELEM

  · Locking element for connecting two separate plates
  
  · Click signal when locked
  
  · Form A mounting option: for plate thickness 6 or 12 mm
  
  · Fastening screws included

  Select to compare

  Configure now
  Starting from∗ ：	40.02 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Locating cylinder stainless steel, pneumatic (03161)

  NORELEM

  · Suitable for automation processes
  
  · Pneumatic actuation
  
  · Compact design
  
  · Rust-free

  Select to compare

  Configure now
  Starting from∗ ：	128.64 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Locating cylinder Ball Lock (03153)

  NORELEM

  · Mechanical positioning and clamping system
  
  · Various sizes
  
  · High retaining forces
  
  · For different thicknesses of clamping plate

  Select to compare

  Configure now
  Starting from∗ ：	125.59 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Locating pins removable Form A (K0817)

  KIPP

  · Hardened
  
  · Ground

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	11.96 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Eccentric supports (K0822)

  KIPP

  · Flexible positioning through off-centre fastening hole
  
  · Contact faces ground and tempered
  
  · Fastened with a socket head screw
  
  · Various heights available
  
  · For supporting workpieces

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	23.16 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Support blocks (K0827)

  KIPP

  · Contact faces ground and tempered
  
  · Various heights available
  
  · Fastened with a socket head screw
  
  · For supporting workpieces

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	113.41 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Angle plates with T-slots, grey cast iron (K1451)

  KIPP

  Material:
  GJL 250 annealed.
  
  On request:
  Other slot widths.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2,093.00 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Locating cylinder pneumatic, form A, carbon steel black hardened (03161)

  NORELEM

  · Fast opening and closing
  
  · Pneumatic positioning and clamping system
  
  · Reduced changeover times
  
  · Quick and easy component assembly

  Select to compare

  Configure now
  Starting from∗ ：	676.20 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Magnet for telescopic clamping unit (02403)

  NORELEM

  · Can be positioned anywhere
  
  · Flexible placement
  
  · Simple activation and deactivation of the magnet
  
  · Magnetic force up to 1470 N
  
  · Interface with stabiliser via clamping ball with cup

  Select to compare

  Configure now
  Starting from∗ ：	804.54 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Positioning unit sprung, carbon steel, Comp:Tool steel (03170)

  NORELEM

  · Positioning and supporting of workpieces with boreholes
  
  · Form A: locating and support element
  
  · Form B: locating element

  Select to compare

  Configure now
  Starting from∗ ：	155.61 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Serration Lock _LXP

  NABEYA BI-TECH

  [Features]
  · Rotational direction positioning part.
  · With 2 serration locks in combination 6° and the adjustment multiple angle, that is 2, 3, 5, 6, 10, 12, 15, 20, 30 can be positioned.
  · At the center of the serration lock, the reamer hole and female thread have been machined.
  · In serration lock sets there are 2 types of system
  · Choose from 2 types of installation methods for machinery / equipment.
  · Used in conjunction with serration lock use guide LXP, rotation operation in loosened serration lock state is easy.
  · Used in conjunction with serration lock use spring LXP when the serration lock is loosened, serration engagement releases.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	58.05 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Adjusting Stopper (Lightweight Type) (BJ210)

  IMAO CORPORATION

  The screw height can be changed in three steps and can also be used as an auxiliary clamp. A short type with a fixed screw height is also available.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	19.14 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Mini Adjusting Stopper (BJ211)

  IMAO CORPORATION

  A stopper that can be adjusted to the desired height. Can also be used as an auxiliary clamp. A short type is also available.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	12.82 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Adjustable Tenison levers, Stainless Steel

  GANTER

  Adjustable tension levers GN 212.5 have proved to be ideal whenever parts have to be clamped in a confined space or a particular lever position is re-quired. The threaded insert is connected with the hub via serrations which can be disengaged.
  Pulling the lever, disengages the serrations and allowing it to be swivelled to the ideal clamping position. On releasing the lever it will automatically re-engage.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	31.34 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Adjustable Tension levers, Stainless Steel

  GANTER

  Adjustable tension levers GN 212.5 have proved to be ideal whenever parts have to be clamped in a confined space or a particular lever position is required. The threaded insert is connected with the hub via serrations which can be disengaged.
  Pulling the lever, disengages the serrations and allowing it to be swivelled to the ideal clamping position. On releasing the lever it will automatically re-engage.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	30.68 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Adjustable tension levers, Steel

  GANTER

  Adjustable tension levers GN 212.3 have proved to be ideal whenever parts have to be clamped in a confined space or a particular lever position is required. The threaded insert is connected with the hub via serrations which can be disengaged.
  Pulling the lever, disengages the serrations and allowing it to be swivelled to the ideal clamping position. On releasing the lever it will automatically re-engage.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	20.82 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Control levers, Steel

  GANTER

  Control levers GN 223 can also be supplied as standard with:
  Square DIN 79 V + Bore diameter
  Keyway DIN 6885 K + Bore diameter

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	16.58 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Control levers, Steel

  GANTER

  Control levers GN 211 can be used in connection with indexing elements, grooves for angle limitations and such like due to their comparably big hub diameter.
  Spring plungers as well as indexing plungers can be used as indexing elements.
  Control levers GN 211 can also be supplied as standard with:
  Square DIN 79 V + Bore diameter
  Keyway DIN 6885 K + Bore diameter

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	17.48 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Installation kits for position indicators

  GANTER

  The GN 295 installation kits are needed for mounting a position indicator on linear units. The installation kits comprise an adapter shaft and a torque support including attachment screws.
  Order mechanical position indicators GN 953 / GN 954 / GN 955 with a counter pitch that corresponds to that of the trapezoidal threaded spindle.
  For position indicators GN 9053 / GN 9054, the position indicator pitch is programmed.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	36.30 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Installation kits for position indicators

  GANTER

  The installation kits GN 491.1 are required for the attachment of a position indicator to double tube linear actuators. They consist of an adapter shaft and, depending on the position indicator, a torque support including fixing screws.
  Mechanical position indicators GN 953 / GN 954 / GN 955 must be ordered so that the counter is aligned with the rising of the trapezoidal thread spindle.
  For the position indicators GN 9053 / GN 9054 the respective rising is set at the position indicator for every programming.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	18.30 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Tension levers, Steel

  GANTER

  Tension levers GN 212 are used as clamping element as well as operating levers.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	15.92 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Turret levers, Steel

  GANTER

  Turret levers GN 213 can also be supplied as standard with:
  Square DIN 79 V + Bore diameter
  Keyway DIN 6885 K + Bore diameter

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	43.00 €
  	Special price
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Electrical positioning unit

  ASUTEC

  Positioning units are used to precisely position the workpiece carrier after stopping. When the positioning cylinder is extended, the workpiece carrier is centered with suitable locating pins and thus exactly positioned. Typically, the workpiece carrier is lifted by the positioning slightly from the conveyor belt and above pressed against a fixed stop. Thus, the workpiece carrier no longer rests on the conveyor belt and processes on the work piece can occur without vibration. The positioning units are supplied without accessories and have a receiving bore for the insertion of suitable locating pin. The electrical positioning units "ASPEL" from ASUTEC have an electromotive drive and an integrated evaluation electronics.

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1,270.94 €
  Min. Shipping Days ：	15 Days

  *Unit price with basic configuration

• 

  Pneumatic accelerator module

  ASUTEC

  Acceleration modules from ASUTEC ensure a noticeable reduction of the cycle times by shortening the time between the individual machining cycles. The acceleration module ensures that the workpiece to be machined leaves the machining station more quickly and thus the next machining cycle can start earlier. The use of an acceleration module is very effective especially in transfer systems with low belt friction, as in the case of an accumulation roller chain conveyor. As soon as the separator lowers and releases the workpiece carrier for further transport, the acceleration module is activated and pushes and accelerates the workpiece carrier. This makes it possible to shorten the cycle times of up to 2 seconds.

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	290.66 €
  Min. Shipping Days ：	19 Days

  *Unit price with basic configuration

Loading...