Indexing Plungers (2 oldal)

• 

  • KEDVEZMÉNYEZETT
  • Volume Discount

  GANTER

  Cam action indexing plungers with flange / Guide zinc die casting

  Cam action indexing plungers GN 612.9 are used in cases where the plunger must not protrude all the time. By rotating the lever through 180° the plunger withdraws itself. The notch allows safe positioning.

  További részletek

  CAD:

  2D

  /3D

  Type	Locking Mechanism	Mounting Method	Overall Length	Body Material	All Stainless	Tip Material	Body O.D./Thread M(mm)	Stroke S(mm)
  –	–	–	–	–	–	–	16 ～ 20	–

  Normál ár (ÁFA nélkül):

  9.42 €～

  Normál ár (ÁFA nélkül):

  Speciális ár

  Normál feladási dátum:

  Raktári cikk - 1 munkanap

  Egyes tételeket még aznap fel lehet adni

  Konfigurálás
• 

  • Volume Discount

  GANTER

  Clamping indexing plungers with safety function

  Clamping indexing GN 7336.8 plungers are an advanced development of the GN 7336.7 clamping knobs with indexing plunger.Like the latter, they are used for positioning, securing and clamping adjusting elements at the same time. This configuration ensures that the indexing pin cannot be pulled from the indexing bore by turning the knurled knob, but only be deliberately pulling the handle (safety function).

  További részletek

  CAD:

  2D

  /3D

  Type	Locking Mechanism	Mounting Method	Overall Length	Body Material	All Stainless	Tip Material	Body O.D./Thread M(mm)	Stroke S(mm)
  –	–	–	–	–	–	–	–	–

  Normál ár (ÁFA nélkül):

  26.18 €～

  Normál feladási dátum:

  7 munkanapok

  Konfigurálás
• 

  • KEDVEZMÉNYEZETT
  • Volume Discount

  GANTER

  Stainless Steel-Indexing plungers with red knob / GN 817

  Stainless Steel-Indexing plungers GN 817 with rest position (Type C / CK) are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.

  További részletek

  CAD:

  2D

  /3D

  Type	Locking Mechanism	Mounting Method	Overall Length	Body Material	All Stainless	Tip Material	Body O.D./Thread M(mm)	Stroke S(mm)
  –	–	–	–	Stainless Steel	–	–	–	–

  Normál ár (ÁFA nélkül):

  12.32 €～

  Normál ár (ÁFA nélkül):

  Speciális ár

  Normál feladási dátum:

  Raktári cikk - 1 munkanap

  Egyes tételeket még aznap fel lehet adni

  Konfigurálás
• 

  • KEDVEZMÉNYEZETT
  • Volume Discount

  GANTER

  Stainless Steel-Mini indexing plungers

  Stainless Steel-Mini indexing plungers GN 822.7 are distinguished for their small dimensions. Based on the principle of the mini indexing plungers GN 822, this model combines their clever type of construction with a complete series of all current sizes of bolts and threads. They provide a reasonably priced alternative to the GN 607 / GN 607.1 indexing plungers of the appropriate sizes. To mount, first turn the mini indexing plunger in with the knurled button. Pulling the indexing pin will release the hexagon nut which can then be tightened with an open-end spanner.The spanner flats on the lock nut are revealed when retracting the pin, so that the mini indexing plunger can be easily tightened by means of a fork spanner.In type CN, the button can be turned by 30° after retracting the indexing pin, holding it in the “retraced” position using the indexing lock.

  További részletek

  CAD:

  2D

  /3D

  Type	Locking Mechanism	Mounting Method	Overall Length	Body Material	All Stainless	Tip Material	Body O.D./Thread M(mm)	Stroke S(mm)
  –	–	–	–	–	–	–	–	–

  Normál ár (ÁFA nélkül):

  14.56 €～

  Normál ár (ÁFA nélkül):

  Speciális ár

  Normál feladási dátum:

  Raktári cikk - 1 munkanap

  Egyes tételeket még aznap fel lehet adni

  Konfigurálás
• 

  • KEDVEZMÉNYEZETT
  • Volume Discount

  GANTER

  Stainless Steel-Spring latches with flange for surface mounting

  Spring latches GN 722.3 are used when the indexing pin is temporarily not allowed to protrude. The indexing pin retracts by turning the latch by 180°. A lock notch will hold the latch in both positions.Spring latches GN 722.3 are designed for use in steel construction or in locksmith shops where less precise positioning / locking is normally required. The dimensional tolerances are therefore chosen to ensure that functional safety is guaranteed under dirt exposure and that cost-effetive production methods are used.

  További részletek

  CAD:

  2D

  /3D

  Type	Locking Mechanism	Mounting Method	Overall Length	Body Material	All Stainless	Tip Material	Body O.D./Thread M(mm)	Stroke S(mm)
  –	–	–	–	Stainless Steel	–	–	–	–

  Normál ár (ÁFA nélkül):

  31.88 €～

  Normál ár (ÁFA nélkül):

  Speciális ár

  Normál feladási dátum:

  Raktári cikk - 1 munkanap

  Egyes tételeket még aznap fel lehet adni

  Konfigurálás
• 

  NORELEM

  Indexing plungers, steel or stainless steel with plastic mushroom grip and locking slot (03089)

  · Indexing plungers facilitate indexing and locking· Application sectors: machine, instrument and fixture construction, measuring technology, domestic use· High stability· Easy handling· Material: steel or stainless steel

  További részletek

  Type	Locking Mechanism	Mounting Method	Overall Length	Body Material	All Stainless	Tip Material	Body O.D./Thread M(mm)	Stroke S(mm)
  Standard Knob	–	–	–	Steel / Stainless Steel	–	–	6x0.75 ～ 24x2	3.5 ～ 16

  Normál ár (ÁFA nélkül):

  10.45 €～

  Normál feladási dátum:

  4 munkanapok

  Konfigurálás
• 

  • KEDVEZMÉNYEZETT
  • Volume Discount

  MISUMI

  Indexing Plungers / Knobless / Compact

  CAD:

  2D

  /3D

  Type	Locking Mechanism	Mounting Method	Overall Length	Body Material	All Stainless	Tip Material	Body O.D./Thread M(mm)	Stroke S(mm)
  W/o Knob	Without Locking Nose	Screw-In	Standard	Steel / Stainless Steel	–	Steel / Stainless Steel	8 ～ 16	4 ～ 12

  Normál ár (ÁFA nélkül):

  14.61 €～

  Normál ár (ÁFA nélkül):

  Speciális ár

  Normál feladási dátum:

  Raktári cikk - 1 munkanap

  Egyes tételeket még aznap fel lehet adni

  Konfigurálás
• 

  • Volume Discount

  IMAO CORPORATION

  Index Plunger (LBLT)

  Simple type index plunger ideal for temporary work fixing, etc.

  További részletek

  CAD:

  2D

  /3D

  Type	Locking Mechanism	Mounting Method	Overall Length	Body Material	All Stainless	Tip Material	Body O.D./Thread M(mm)	Stroke S(mm)
  Lever Type	With Locking Nose	Screw-In	Standard	Steel	Not Compliant	Steel	6 ～ 16	9.5 ～ 25

  Normál ár (ÁFA nélkül):

  18.91 €～

  Normál feladási dátum:

  6 munkanapok

  Konfigurálás
• 

  • Volume Discount

  IMAO CORPORATION

  Index Plunger (Nose Lock Model) (NDXN-L-ASUS)

  This has the nose-locking style that keeps the pin in a retracted state. It is all made of stainless steel so it is optimal for locations requiring rust resistance and for use in clean environments. It is available in two types, the nose hardening type and no-bake type. [Features]- It is a hand operated index plunger. Pull the knob and the nose retracts and the position release is easily done, let go of the knob and the nose returns to the original state by the force of the internal spring. - The nose locking type can be locked (fixed) by rotating the knob 90° while it is pulled and the nose is retracted.

  További részletek

  CAD:

  2D

  /3D

  Type	Locking Mechanism	Mounting Method	Overall Length	Body Material	All Stainless	Tip Material	Body O.D./Thread M(mm)	Stroke S(mm)
  Standard Knob	With Locking Nose	Screw-In	Standard	Stainless Steel	Applicable	Stainless Steel	6 ～ 20	3.5 ～ 10

  Normál ár (ÁFA nélkül):

  46.02 €～

  Normál feladási dátum:

  6 munkanapok

  Konfigurálás
• 

  HALDER

  Index Bolt With Hexagon Collar, Locking / Stainless steel 1.4305 / nickel-plated / EH 22120.

  [Features]· For index holes.· Pull the knob and rotate 90 degrees to fix the pin in place in a withdrawn state using the notch.· Use distance collar (EH22120) to adjust the depth of the screw-in.

  További részletek

  CAD:

  3D

  Type	Locking Mechanism	Mounting Method	Overall Length	Body Material	All Stainless	Tip Material	Body O.D./Thread M(mm)	Stroke S(mm)
  Standard Knob	–	Screw-In	–	–	–	–	–	–

  Normál ár (ÁFA nélkül):

  28.47 €～

  Normál feladási dátum:

  2 munkanapok

  Konfigurálás
• 

  • Volume Discount

  GANTER

  Indexing plungers with rest position, Steel / Plastic knob

  Indexing plungers GN 617.1 with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted.A notch keeps the plunger in this position.

  További részletek

  CAD:

  2D

  /3D

  Type	Locking Mechanism	Mounting Method	Overall Length	Body Material	All Stainless	Tip Material	Body O.D./Thread M(mm)	Stroke S(mm)
  –	–	–	–	–	–	–	–	–

  Normál ár (ÁFA nélkül):

  10.48 €～

  Normál feladási dátum:

  4 munkanapok

  Konfigurálás
• 

  • KEDVEZMÉNYEZETT
  • Volume Discount

  GANTER

  Locking plungers, Plunger protruded

  If not operated, the plunger of the locking plungers GN 816 protrudes. To retract, move against the spring force and hold in the end position by turning by 90°.The shape of the cam curve secures the plunger against accidental operation.When operating the button (Type AR / ARK), the visible red covering sleeve indicates the locking status: Indexing pin does not protrude.For the execution with operation with key (Type B / BK) a key is required to move the plunger. In this execution, a cover sleeve provides additional security and safety from unauthorized removal of the locking plunger. The cover sleeve also provides additional protection against malfunction caused by dirt.

  További részletek

  CAD:

  2D

  /3D

  Type	Locking Mechanism	Mounting Method	Overall Length	Body Material	All Stainless	Tip Material	Body O.D./Thread M(mm)	Stroke S(mm)
  –	–	–	–	–	–	–	–	–

  Normál ár (ÁFA nélkül):

  19.58 €～

  Normál ár (ÁFA nélkül):

  Speciális ár

  Normál feladási dátum:

  Raktári cikk - 1 munkanap

  Egyes tételeket még aznap fel lehet adni

  Konfigurálás
• 

  • KEDVEZMÉNYEZETT
  • Volume Discount

  GANTER

  Locking plungers, PUSH-PUSH locking mechanism

  The indexing pin in the locking plungers GN 514 is moved via a so-called cardioid mechanism. This mechanism means that the indexing pin is both extended and retracted alone by pressing the operating button (PUSH-PUSH locking mechanism). Please note that the indexing pin cannot absorb any axial forces and that it retracts virtually by spring action; the indexing pin must therefore remain free and easy to move.

  További részletek

  CAD:

  2D

  /3D

  Type	Locking Mechanism	Mounting Method	Overall Length	Body Material	All Stainless	Tip Material	Body O.D./Thread M(mm)	Stroke S(mm)
  –	–	–	–	–	–	–	–	–

  Normál ár (ÁFA nélkül):

  14.76 €～

  Normál ár (ÁFA nélkül):

  Speciális ár

  Normál feladási dátum:

  Raktári cikk - 1 munkanap

  Egyes tételeket még aznap fel lehet adni

  Konfigurálás
• 

  • KEDVEZMÉNYEZETT
  • Volume Discount

  GANTER

  Spring latches with flange for surface mounting / GN 722.2

  Spring latches GN 722.2 are used when the indexing pin is temporarily not allowed to protrude. The indexing pin retracts by turning the latch by 180°. A lock notch will hold the latch in both positions.Spring latches GN 722.2 are designed for use in steel construction or in locksmith shops where less precise positioning / locking is normally required. The dimensional tolerances are therefore chosen to ensure that functional safety is guaranteed under dirt exposure and that cost-effetive production methods are used.

  További részletek

  CAD:

  2D

  /3D

  Type	Locking Mechanism	Mounting Method	Overall Length	Body Material	All Stainless	Tip Material	Body O.D./Thread M(mm)	Stroke S(mm)
  With Side Flange	With Locking Nose	Flange	Standard	Steel / Stainless Steel	Applicable / Not Compliant	Steel / Stainless Steel	–	14

  Normál ár (ÁFA nélkül):

  13.78 €～

  Normál ár (ÁFA nélkül):

  Speciális ár

  Normál feladási dátum:

  Raktári cikk - 1 munkanap

  Egyes tételeket még aznap fel lehet adni

  Konfigurálás
• 

  KIPP

  Indexing plungers Form B (K0338)

  · Indexing plungers facilitate indexing and locking· Application sectors: machine, instrument and fixture construction, measuring technology, domestic use· High stability· Easy handling· Material: steel or stainless steel

  További részletek

  CAD:

  2D

  /3D

  Type	Locking Mechanism	Mounting Method	Overall Length	Body Material	All Stainless	Tip Material	Body O.D./Thread M(mm)	Stroke S(mm)
  –	–	–	–	Steel / Stainless Steel	–	–	–	3.5 ～ 16

  Normál ár (ÁFA nélkül):

  7.05 €～

  Normál feladási dátum:

  4 munkanapok

  Konfigurálás
• 

  KIPP

  Indexing plungers Form B (K0339)

  · Indexing plungers facilitate indexing and locking· Application sectors: machine, instrument and fixture construction, measuring technology, domestic use· High stability· Material: steel or stainless steel

  További részletek

  CAD:

  2D

  /3D

  Type	Locking Mechanism	Mounting Method	Overall Length	Body Material	All Stainless	Tip Material	Body O.D./Thread M(mm)	Stroke S(mm)
  –	–	–	–	Steel / Stainless Steel	–	–	–	5 ～ 10

  Normál ár (ÁFA nélkül):

  7.76 €～

  Normál feladási dátum:

  4 munkanapok

  Konfigurálás
• 

  KIPP

  Indexing plungers with extended locking pin Form A (K0630)

  · Indexing plungers facilitate indexing and locking· Application sectors: machine, instrument and fixture construction, measuring technology, domestic use· High stability· Material: steel or stainless steel

  További részletek

  CAD:

  2D

  /3D

  Type	Locking Mechanism	Mounting Method	Overall Length	Body Material	All Stainless	Tip Material	Body O.D./Thread M(mm)	Stroke S(mm)
  –	–	–	–	Steel / Stainless Steel	–	–	–	5 ～ 24

  Normál ár (ÁFA nélkül):

  7.29 €～

  Normál feladási dátum:

  4 munkanapok

  Konfigurálás
• 

  NORELEM

  Indexing plungers, steel or stainless steel with plastic mushroom grip, locking slot and locknut (03090)

  · Indexing plungers facilitate indexing and locking· Application sectors: machine, instrument and fixture construction, measuring technology, domestic use· High stability· Material: steel or stainless steel

  További részletek

  Type	Locking Mechanism	Mounting Method	Overall Length	Body Material	All Stainless	Tip Material	Body O.D./Thread M(mm)	Stroke S(mm)
  Standard Knob	–	–	–	Steel / Stainless Steel	–	–	10x1 ～ 20x1.5	5 ～ 10

  Normál ár (ÁFA nélkül):

  12.31 €～

  Normál feladási dátum:

  4 munkanapok

  Konfigurálás
• 

  NORELEM

  Indexing plungers, steel with draw hook (03091)

  · Indexing plungers facilitate indexing and locking· Application sectors: machine, instrument and fixture construction, measuring technology, domestic use· High stability

  További részletek

  Type	Locking Mechanism	Mounting Method	Overall Length	Body Material	All Stainless	Tip Material	Body O.D./Thread M(mm)	Stroke S(mm)
  W/o Knob	–	–	–	Steel	–	–	6 ～ 16	9.5 ～ 25

  Normál ár (ÁFA nélkül):

  6.79 €～

  Normál feladási dátum:

  4 munkanapok

  Konfigurálás
• 

  • KEDVEZMÉNYEZETT
  • Volume Discount

  NABEYA BI-TECH

  Indexing Plunger PXX

  Indexing or positioning pin. Good abrasion resistance.[Features]- Indexing or positioning pin.- New standards for [PXXS-S] and [PXXS-SK] with stainless steel knobs.- Pin is hardened (steel) or nickel-plated (stainless steel). Excels in abrasion resistance.- If the threaded part is too long for the mounting surface, use the [PXC] indexing plunger collar instead.- Use a locking service for fixing indexing plungers.

  További részletek

  CAD:

  2D

  /3D

  Type	Locking Mechanism	Mounting Method	Overall Length	Body Material	All Stainless	Tip Material	Body O.D./Thread M(mm)	Stroke S(mm)
  Standard Knob / W/o Knob	Not Provided	Screw-In	Standard	–	Applicable / Not Compliant	–	10 ～ 20	5 ～ 10

  Normál ár (ÁFA nélkül):

  19.55 €～

  Normál ár (ÁFA nélkül):

  Speciális ár

  Normál feladási dátum:

  Raktári cikk - 1 munkanap

  Egyes tételeket még aznap fel lehet adni

  Konfigurálás
• 

  • KEDVEZMÉNYEZETT
  • Volume Discount

  NABEYA BI-TECH

  Indexing Plunger PLY

  Two types of standardized stroke for each pin diameter. Pull the knob and rotate 90° to lock with the pin retracted. To unlock, pull the knob slightly and rotate 90°. Returns to its original position via internal spring action.

  További részletek

  CAD:

  2D

  /3D

  Type	Locking Mechanism	Mounting Method	Overall Length	Body Material	All Stainless	Tip Material	Body O.D./Thread M(mm)	Stroke S(mm)
  Standard Knob	With Locking Nose	Screw-In	Standard	–	Not Compliant	–	8 ～ 20	4 ～ 15

  Normál ár (ÁFA nélkül):

  13.93 €～

  Normál ár (ÁFA nélkül):

  Speciális ár

  Normál feladási dátum:

  Raktári cikk - 1 munkanap

  Egyes tételeket még aznap fel lehet adni

  Konfigurálás
• 

  • KEDVEZMÉNYEZETT

  HALDER

  Index Bolt

  [Features]· For index holes.· If the lever is rotated 180 degrees the pin retracts. The knob section can be used to maintain this state.· The operating temperature range of the plastic cap is from -30 to +80°C.

  További részletek

  CAD:

  3D

  Type	Locking Mechanism	Mounting Method	Overall Length	Body Material	All Stainless	Tip Material	Body O.D./Thread M(mm)	Stroke S(mm)
  Special Knobs	–	Screw-In	–	–	–	–	–	–

  Normál ár (ÁFA nélkül):

  12.58 €～

  Normál ár (ÁFA nélkül):

  Speciális ár

  Normál feladási dátum:

  Raktári cikk - 1 munkanap

  Egyes tételeket még aznap fel lehet adni

  Konfigurálás
• 

  • KEDVEZMÉNYEZETT
  • Volume Discount

  GANTER

  Cam action indexing plungers, Steel

  Cam action indexing plungers GN 612 are used in cases where the locking pin must not protrude all the time. By rotating the lock through 180° the locking pin withdraws itself. A groove is provided in either position to prevent the lock from rotating.

  További részletek

  CAD:

  2D

  /3D

  Type	Locking Mechanism	Mounting Method	Overall Length	Body Material	All Stainless	Tip Material	Body O.D./Thread M(mm)	Stroke S(mm)
  –	–	–	–	–	–	–	–	–

  Normál ár (ÁFA nélkül):

  14.22 €～

  Normál ár (ÁFA nélkül):

  Speciális ár

  Normál feladási dátum:

  Raktári cikk - 1 munkanap

  Egyes tételeket még aznap fel lehet adni

  Konfigurálás
• 

  • KEDVEZMÉNYEZETT
  • Volume Discount

  GANTER

  Indexing Plungers / Removable / Steel / GN 817.8

  Indexing plungers GN 817.8 have been designed such that special versions of the indexing pins can also be made economically in smaller unit quantities.If reqired, the indexing pins can be machined or made by the user as shown in the drawing above. They are assembled with a countersunk screw and can therefore be assembled several times. All parts are supplied in a non-assembled set.The indexing plungers type C / CK are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.

  További részletek

  CAD:

  2D

  /3D

  Type	Locking Mechanism	Mounting Method	Overall Length	Body Material	All Stainless	Tip Material	Body O.D./Thread M(mm)	Stroke S(mm)
  –	–	–	–	Steel	–	–	–	–

  Normál ár (ÁFA nélkül):

  12.46 €～

  Normál ár (ÁFA nélkül):

  Speciális ár

  Normál feladási dátum:

  Raktári cikk - 1 munkanap

  Egyes tételeket még aznap fel lehet adni

  Konfigurálás
• 

  • KEDVEZMÉNYEZETT
  • Volume Discount

  GANTER

  Indexing plungers, Stainless Steel, with knob, with and without rest position

  GN 717 Stainless Steel-Indexing plungers are characterized by small dimensions. These indexing plungers are universally applicable due to their prevention of misalignments and positioning errors of the mating indexing bores.The type C / CK with rest position are used for such applications where the plunger has to stay in its retracted position.During assembly, the max. tightening torques shown in the table should not be exceeded when securing the lock nut.

  További részletek

  CAD:

  2D

  /3D

  Type	Locking Mechanism	Mounting Method	Overall Length	Body Material	All Stainless	Tip Material	Body O.D./Thread M(mm)	Stroke S(mm)
  –	–	–	–	Stainless Steel	–	–	–	–

  Normál ár (ÁFA nélkül):

  5.52 €～

  Normál ár (ÁFA nélkül):

  Speciális ár

  Normál feladási dátum:

  Raktári cikk - 1 munkanap

  Egyes tételeket még aznap fel lehet adni

  Konfigurálás
• 

  • KEDVEZMÉNYEZETT
  • Volume Discount

  GANTER

  Indexing plungers, Steel, with knob, with and without rest position

  GN 717 indexing plungers are characterized by small dimensions. These indexing plungers are universally applicable due to their prevention of misalignments and positioning errors of the mating indexing bores.The type C / CK with rest position are used for such applications where the plunger has to stay in its retracted position.During assembly, the max. tightening torques shown in the table should not be exceeded when securing the lock nut.

  További részletek

  CAD:

  2D

  /3D

  Type	Locking Mechanism	Mounting Method	Overall Length	Body Material	All Stainless	Tip Material	Body O.D./Thread M(mm)	Stroke S(mm)
  –	–	–	–	Steel	–	–	–	–

  Normál ár (ÁFA nélkül):

  5.12 €～

  Normál ár (ÁFA nélkül):

  Speciális ár

  Normál feladási dátum:

  Raktári cikk - 1 munkanap

  Egyes tételeket még aznap fel lehet adni

  Konfigurálás
• 

  • KEDVEZMÉNYEZETT
  • Volume Discount

  GANTER

  Mini indexing plungers, Stainless Steel / Plastic knob

  Mini indexing plungers GN 822.7 are distinguished for their small dimensions. Based on the principle of the mini indexing plungers GN 822, this model combines their clever type of construction with a complete series of all current sizes of bolts and threads. They provide a reasonably priced alternative to the GN 607 / GN 607.1 indexing plungers of the appropriate sizes. To mount, first turn the mini indexing plunger in with the knurled button. Pulling the indexing pin will release the hexagon nut which can then be tightened with an open-end spanner.They are inserted into position by holding them by the serrated knob. The spanner flats on the lock nut are revealed when retracting the pin, so that the mini indexing plunger can be easily tightened by means of a fork spanner.In type C, the button can be turned by 30° after retracting the indexing pin, holding it in the “retraced” position using the indexing lock.

  További részletek

  CAD:

  2D

  /3D

  Type	Locking Mechanism	Mounting Method	Overall Length	Body Material	All Stainless	Tip Material	Body O.D./Thread M(mm)	Stroke S(mm)
  –	–	–	–	–	–	–	–	–

  Normál ár (ÁFA nélkül):

  6.46 €～

  Normál ár (ÁFA nélkül):

  Speciális ár

  Normál feladási dátum:

  Raktári cikk - 1 munkanap

  Egyes tételeket még aznap fel lehet adni

  Konfigurálás
• 

  • KEDVEZMÉNYEZETT
  • Volume Discount

  GANTER

  Stainless Steel-Mini indexing plungers, with and without rest position

  Stainless Steel-Mini indexing plungers GN 822.9 are distinguished for their small dimensions. They are mounted by countersunk screws.The Stainless Steel-Mini indexing plungers present an affordable alternative to the GN 608.5 and GN 608.6 Stainless Steel-Indexing plungers.In types C and CN, the button can be turned by 30° after retracting the indexing pin, holding it in the "retraced" position using the indexing lock.

  További részletek

  CAD:

  2D

  /3D

  Type	Locking Mechanism	Mounting Method	Overall Length	Body Material	All Stainless	Tip Material	Body O.D./Thread M(mm)	Stroke S(mm)
  –	–	–	–	–	–	–	–	–

  Normál ár (ÁFA nélkül):

  14.38 €～

  Normál ár (ÁFA nélkül):

  Speciális ár

  Normál feladási dátum:

  Raktári cikk - 1 munkanap

  Egyes tételeket még aznap fel lehet adni

  Konfigurálás
• 

  • KEDVEZMÉNYEZETT
  • Volume Discount

  ELESA

  PMT.100 - Indexing plungers -SUPER-technopolymer body

  Indexing plungers with threaded body in glass fibre reinforced polyamide-based SUPER-technopolymer, plunger in hardened and burnished steel or AISI 303 stainless steel, knob in high-resilience polyamide-based technopolymer in black or red RAL 3000, spring in stainless steel AISI 302 and locking nut in glass fibre reinforced polyamide-based SUPER-technopolymer.Thanks to the low coefficient of friction of the material, the application of lubricating grease is not required.

  További részletek

  CAD:

  2D

  /3D

  Type	Locking Mechanism	Mounting Method	Overall Length	Body Material	All Stainless	Tip Material	Body O.D./Thread M(mm)	Stroke S(mm)
  –	–	–	–	Stainless Steel / Polyamide	–	–	M10 ～ M20	5 ～ 10

  Normál ár (ÁFA nélkül):

  5.37 €～

  Normál ár (ÁFA nélkül):

  Speciális ár

  Normál feladási dátum:

  Raktári cikk - 1 munkanap

  Egyes tételeket még aznap fel lehet adni

  Konfigurálás
• 

  KIPP

  Indexing plungers Form C (K0338)

  · Indexing plungers facilitate indexing and locking· Application sectors: machine, instrument and fixture construction, measuring technology, domestic use· High stability· Easy handling· Material: steel or stainless steel

  További részletek

  CAD:

  2D

  /3D

  Type	Locking Mechanism	Mounting Method	Overall Length	Body Material	All Stainless	Tip Material	Body O.D./Thread M(mm)	Stroke S(mm)
  –	–	–	–	Steel / Stainless Steel	–	–	–	3.5 ～ 16

  Normál ár (ÁFA nélkül):

  8.71 €～

  Normál feladási dátum:

  4 munkanapok

  Konfigurálás
• 

  KIPP

  Indexing plungers Form D (K0338)

  · Indexing plungers facilitate indexing and locking· Application sectors: machine, instrument and fixture construction, measuring technology, domestic use· High stability· Easy handling· Material: steel or stainless steel

  További részletek

  CAD:

  2D

  /3D

  Type	Locking Mechanism	Mounting Method	Overall Length	Body Material	All Stainless	Tip Material	Body O.D./Thread M(mm)	Stroke S(mm)
  –	–	–	–	Steel / Stainless Steel	–	–	–	3.5 ～ 16

  Normál ár (ÁFA nélkül):

  8.81 €～

  Normál feladási dátum:

  4 munkanapok

  Konfigurálás
• 

  KIPP

  Indexing plungers with extended pin Form B (K0630)

  · Indexing plungers facilitate indexing and locking· Application sectors: machine, instrument and fixture construction, measuring technology, domestic use· High stability· Material: steel or stainless steel

  További részletek

  CAD:

  2D

  /3D

  Type	Locking Mechanism	Mounting Method	Overall Length	Body Material	All Stainless	Tip Material	Body O.D./Thread M(mm)	Stroke S(mm)
  –	–	–	–	Steel / Stainless Steel	–	–	–	5 ～ 24

  Normál ár (ÁFA nélkül):

  7.36 €～

  Normál feladási dátum:

  4 munkanapok

  Konfigurálás
• 

  HALDER

  Index Plungers, with hexagon collar, stainless steel A4

  MaterialBody • Stainless steel 1.4401Locking pin • Stainless steel 1.4401 nickel-platedKnob • Thermoplastic PA 6, black-grey, matt • Stainless steel 1.4401Lock nut • Stainless steel 1.4401NotesKnob not removable.Lock nuts have to be purchased separately.

  További részletek

  Type	Locking Mechanism	Mounting Method	Overall Length	Body Material	All Stainless	Tip Material	Body O.D./Thread M(mm)	Stroke S(mm)
  Standard Knob	–	–	–	–	–	–	–	–

  Normál ár (ÁFA nélkül):

  18.17 €～

  Normál feladási dátum:

  3 munkanapok

  Konfigurálás
• 

  NORELEM

  Indexing plungers ECO, steel or stainless steel, with plastic mushroom grip (03089)

  · Indexing plungers facilitate indexing and locking· Application sectors: machine, instrument and fixture construction, measuring technology, domestic use· High stability· Material: steel or stainless steel· Inexpensive version

  További részletek

  Type	Locking Mechanism	Mounting Method	Overall Length	Body Material	All Stainless	Tip Material	Body O.D./Thread M(mm)	Stroke S(mm)
  Standard Knob	–	–	–	Steel / Stainless Steel	–	–	6 ～ 12x1.5	3.5 ～ 8

  Normál ár (ÁFA nélkül):

  4.43 €～

  Normál feladási dátum:

  4 munkanapok

  Konfigurálás
• 

  NORELEM

  Indexing plungers, steel or stainless steel, without collar, with threaded pin and locknut (03096)

  · Indexing plungers facilitate indexing and locking· Application sectors: machine, instrument and fixture construction, measuring technology, domestic use· High stability· Threaded pins enable the indexing plunger to be operated· Material: steel or stainless steel

  További részletek

  Type	Locking Mechanism	Mounting Method	Overall Length	Body Material	All Stainless	Tip Material	Body O.D./Thread M(mm)	Stroke S(mm)
  W/o Knob	–	–	–	Steel / Stainless Steel	–	–	6x0.75 ～ 24x2	3.5 ～ 16

  Normál ár (ÁFA nélkül):

  7.44 €～

  Normál feladási dátum:

  4 munkanapok

  Konfigurálás
• 

  NORELEM

  Indexing plungers ECO, steel or stainless steel, with plastic mushroom grip and locknut (03089)

  · Indexing plungers facilitate indexing and locking· Application sectors: machine, instrument and fixture construction, measuring technology, domestic use· High stability· Material: steel or stainless steel· Inexpensive version

  További részletek

  Type	Locking Mechanism	Mounting Method	Overall Length	Body Material	All Stainless	Tip Material	Body O.D./Thread M(mm)	Stroke S(mm)
  Standard Knob	–	–	–	Steel / Stainless Steel	–	–	6 ～ 12x1.5	3.5 ～ 8

  Normál ár (ÁFA nélkül):

  4.51 €～

  Normál feladási dátum:

  4 munkanapok

  Konfigurálás
• 

  • Volume Discount

  MISUMI

  Indexing Plungers / Plate Mount

  [Features] It can be used in places where there is no space for a knob.

  További részletek

  CAD:

  2D

  /3D

  Type	Locking Mechanism	Mounting Method	Overall Length	Body Material	All Stainless	Tip Material	Body O.D./Thread M(mm)	Stroke S(mm)
  Standard Knob	With Locking Nose	Flange	Short	Steel	–	Steel	–	6

  Normál ár (ÁFA nélkül):

  87.53 €

  Normál feladási dátum:

  Raktári cikk - 1 munkanap

  Aznapi feladás lehetséges

  Konfigurálás
• 

  • KEDVEZMÉNYEZETT
  • Volume Discount
  • Order quantities extended (D-JIT)

  MISUMI

  Indexing Plungers / Press Fit

  [Features] Indexing plunger Press-fit type. Please drive it in from the top of the press-fit collar.

  További részletek

  CAD:

  2D

  /3D

  Type	Locking Mechanism	Mounting Method	Overall Length	Body Material	All Stainless	Tip Material	Body O.D./Thread M(mm)	Stroke S(mm)
  W/o Knob	Without Locking Nose	Press Fit	Standard	–	–	Stainless Steel	–	4 ～ 12

  Normál ár (ÁFA nélkül):

  24.42 €～

  Normál ár (ÁFA nélkül):

  Speciális ár

  Normál feladási dátum:

  Raktári cikk - 1 munkanap

  Egyes tételeket még aznap fel lehet adni

  Konfigurálás
• 

  • Volume Discount

  GANTER

  Cam action indexing plunger, Plunger pin retracted

  Cam action indexing plungers GN 712.1 are used in such applications where the plunger pin has to protrude only occasionally. When turning the cam by 90° resp. 120° degrees in clockwise direction, the plunger pin is moved through a curved opening in the body. After that, the plunger pin is protruded.Depending on the type, the plunger pin is moved back by a spring in its original position (Type A), is held in protruded position (Type R), resp. is secured against accidental operation (Type S). In order to move the plunger pin, safety version Type S requires an additional pushing of the latch.

  További részletek

  CAD:

  2D

  /3D

  Type	Locking Mechanism	Mounting Method	Overall Length	Body Material	All Stainless	Tip Material	Body O.D./Thread M(mm)	Stroke S(mm)
  –	–	–	–	–	–	–	–	–

  Normál ár (ÁFA nélkül):

  25.62 €～

  Normál feladási dátum:

  7 munkanapok

  Konfigurálás
• 

  • KEDVEZMÉNYEZETT
  • Volume Discount

  GANTER

  Indexing plunger, Steel / Plastic knob

  Type G or GK of the GN 617 indexing plungers have been designed for applications where the indexing plunger is not operated with the standard knob.The indexing plungers are designed such that the plunger set in the end position (spring is "on block") can also absorb axial forces. For applications in which these forces are substantially above the tensile force applied by the operator (Type G), GN 817 indexing plungers are to be preferred.

  További részletek

  CAD:

  2D

  /3D

  Type	Locking Mechanism	Mounting Method	Overall Length	Body Material	All Stainless	Tip Material	Body O.D./Thread M(mm)	Stroke S(mm)
  –	–	–	–	–	–	–	–	–

  Normál ár (ÁFA nélkül):

  8.86 €～

  Normál ár (ÁFA nélkül):

  Speciális ár

  Normál feladási dátum:

  Raktári cikk - 1 munkanap

  Egyes tételeket még aznap fel lehet adni

  Konfigurálás
• 

  • KEDVEZMÉNYEZETT
  • Volume Discount

  GANTER

  Indexing plungers with rest position, Stainless Steel / Plastic knob

  Stainless Steel-Indexing plungers GN 617.1 with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted.A notch keeps the plunger in this position.

  További részletek

  CAD:

  2D

  /3D

  Type	Locking Mechanism	Mounting Method	Overall Length	Body Material	All Stainless	Tip Material	Body O.D./Thread M(mm)	Stroke S(mm)
  –	–	–	–	Stainless Steel	–	–	–	–

  Normál ár (ÁFA nélkül):

  14.98 €～

  Normál ár (ÁFA nélkül):

  Speciális ár

  Normál feladási dátum:

  Raktári cikk - 1 munkanap

  Egyes tételeket még aznap fel lehet adni

  Konfigurálás
• 

  • KEDVEZMÉNYEZETT
  • Volume Discount

  GANTER

  Indexing plungers, Plunger Steel

  Indexing plungers GN 608 are distinguished for their small dimensions.

  További részletek

  CAD:

  2D

  /3D

  Type	Locking Mechanism	Mounting Method	Overall Length	Body Material	All Stainless	Tip Material	Body O.D./Thread M(mm)	Stroke S(mm)
  –	–	–	–	–	–	–	–	–

  Normál ár (ÁFA nélkül):

  8.62 €～

  Normál ár (ÁFA nélkül):

  Speciális ár

  Normál feladási dátum:

  Raktári cikk - 1 munkanap

  Egyes tételeket még aznap fel lehet adni

  Konfigurálás
• 

  • KEDVEZMÉNYEZETT
  • Volume Discount

  GANTER

  Indexing Plungers / Steel, Plastic-Knob / GN 817

  Indexing plungers GN 817 with rest position (Type C / CK) are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.

  További részletek

  CAD:

  2D

  /3D

  Type	Locking Mechanism	Mounting Method	Overall Length	Body Material	All Stainless	Tip Material	Body O.D./Thread M(mm)	Stroke S(mm)
  –	–	–	–	–	–	–	–	–

  Normál ár (ÁFA nélkül):

  7.80 €～

  Normál ár (ÁFA nélkül):

  Speciális ár

  Normál feladási dátum:

  Raktári cikk - 1 munkanap

  Egyes tételeket még aznap fel lehet adni

  Konfigurálás
• 

  • KEDVEZMÉNYEZETT
  • Volume Discount

  GANTER

  Mini indexing plungers, covered indexing mechanism, with red knob

  Mini indexing plungers GN 822 are distinguished for their small dimensions. They have been designed for installation in thin walled sheet metal constructions.They are inserted into position by holding them by the serrated knob. The spanner flats on the lock nut are revealed when retracting the pin, so that the mini indexing plunger can be easily tightened by means of a fork spanner.With type C the knob can be turned by 30° and a notch keeps the knob in this position.

  További részletek

  CAD:

  2D

  /3D

  Type	Locking Mechanism	Mounting Method	Overall Length	Body Material	All Stainless	Tip Material	Body O.D./Thread M(mm)	Stroke S(mm)
  –	–	–	–	Steel / Stainless Steel	–	–	–	–

  Normál ár (ÁFA nélkül):

  5.36 €～

  Normál ár (ÁFA nélkül):

  Speciális ár

  Normál feladási dátum:

  Raktári cikk - 1 munkanap

  Egyes tételeket még aznap fel lehet adni

  Konfigurálás
• 

  • KEDVEZMÉNYEZETT
  • Volume Discount

  GANTER

  Spring latches with flange for surface mounting

  Spring latches GN 722.3 are used when the indexing pin is temporarily not allowed to protrude. The indexing pin retracts by turning the latch by 180°. A lock notch will hold the latch in both positions.Spring latches GN 722.3 are designed for use in steel construction or in locksmith shops where less precise positioning / locking is normally required. The dimensional tolerances are therefore chosen to ensure that functional safety is guaranteed under dirt exposure and that cost-effetive production methods are used.

  További részletek

  CAD:

  2D

  /3D

  Type	Locking Mechanism	Mounting Method	Overall Length	Body Material	All Stainless	Tip Material	Body O.D./Thread M(mm)	Stroke S(mm)
  –	–	–	–	–	–	–	–	–

  Normál ár (ÁFA nélkül):

  15.46 €～

  Normál ár (ÁFA nélkül):

  Speciális ár

  Normál feladási dátum:

  Raktári cikk - 1 munkanap

  Egyes tételeket még aznap fel lehet adni

  Konfigurálás