Indexing Plungers（Page 2）

?* Information on days to ship and prices

• 

  Index Plungers, with mounting flange, horizontal, stainless steel

  HALDER

  Material

  Housing

  • Stainless steel 1.4308, precision casting, bright, matt blasted
  

  Locking pin

  • Stainless steel 1.4305
  

  Pull-ring Type

  • Stainless steel 1.4310
  

  Knob Type

  • Thermoplastic PA 6, black, dull
  

  Assembly

  Assembly by means of washers ISO 7092.

  Operation

  When using locking index plungers, the knob is pulled-out, turned 90° and secured by a notched catch (when locking pin should not overhang).

  Notes

  Knob not removable.

  Select to compare

  Configure now
  Starting from∗ ：	10.89 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Indexing Plungers / Switch Lever / Fine Thread

  MISUMI

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	39.04 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Plungers

  TOSHIN CASTER

  Simple, sturdy structure for easy, safe locking/unlocking. Optimal for equipment that performs positioning or height adjustment.
  
  [Features]
  - Lever-type indexing plunger with simple structure, high strength, and safe design.
  - When locked, the design prevents it from coming off due to accidental shock or contact.
  - When unlocked, the lever can be pulled up, retracted, and retained on the opposite side.
  - Whether locked or unlocked, the lever will not get in the way.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	30.47 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing plungers, Steel, with lifting ring / with wire loop, without rest posit

  GANTER

  GN 717 indexing plungers are characterized by small dimensions. These indexing plungers are universally applicable due to their prevention of misalignments and positioning errors of the mating indexing bores.
  During assembly, the max. tightening torques shown in the table should not be exceeded when securing the lock nut.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.08 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Spring latches with flange for surface mounting / GN 722.2

  GANTER

  Spring latches GN 722.2 are used when the indexing pin is temporarily not allowed to protrude. The indexing pin retracts by turning the latch by 180°. A lock notch will hold the latch in both positions.
  Spring latches GN 722.2 are designed for use in steel construction or in locksmith shops where less precise positioning / locking is normally required. The dimensional tolerances are therefore chosen to ensure that functional safety is guaranteed under dirt exposure and that cost-effetive production methods are used.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	13.78 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Index Plunger PMX

  NABEYA BI-TECH

  Simple structure index plunger.
  [Features]
  · Superior cost performance.
  · For all pin diameters, coarse thread and fine thread are standardized.
  · Can select main body material quality and whether or not to include a lock nut using the product code.
  [Applications]
  · For positioning workpieces.
  · For attaching and detaching workpieces.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	12.29 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Index Plunger (With No Knob) (SDX-N)

  IMAO CORPORATION

  The operating unit can be remotely operated by connecting with screws. There is no hexagonal part so it can be mounted in a small space. Available in steel and stainless steel.
  
  [Features]
  - A hand operated spring plunger where you pull the knob and the nose retracts to easily release the positioning, while if the knob is released, it reverts to the original state by the force of the internal spring.
  - If performing remote operation, it can be joined with the operation screw part.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	17.34 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Index Bolt Without Hexagon Collar

  HALDER

  [Features]
  · For index holes.
  · Operating temperature range: -30 to +80°C.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.63 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Cam action indexing plunger, Plunger pin retracted

  GANTER

  Cam action indexing plungers GN 712.1 are used in such applications where the plunger pin has to protrude only occasionally. When turning the cam by 90° resp. 120° degrees in clockwise direction, the plunger pin is moved through a curved opening in the body. After that, the plunger pin is protruded.
  Depending on the type, the plunger pin is moved back by a spring in its original position (Type A), is held in protruded position (Type R), resp. is secured against accidental operation (Type S). In order to move the plunger pin, safety version Type S requires an additional pushing of the latch.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	25.62 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Spring latches with flange for surface mounting

  GANTER

  Spring latches GN 722.3 are used when the indexing pin is temporarily not allowed to protrude. The indexing pin retracts by turning the latch by 180°.
  A lock notch will hold the latch in both positions.
  Spring latches GN 722.3 are designed for use in steel construction or in locksmith shops where less precise positioning / locking is normally required. The dimensional tolerances are therefore chosen to ensure that functional safety is guaranteed under dirt exposure and that cost-effetive production methods are used.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	15.46 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Indexing plungers with rotation lock and lead-in chamfer, Form A (K1300)

  KIPP

  · Indexing plungers facilitate indexing and locking
  
  · Application sectors: machine, instrument and fixture construction, measuring technology, domestic use

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	10.87 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing Plungers / Resin Knob

  MISUMI

  [Features] The pin can be pushed in and out manually with a knob or lever. Suitable for temporary positioning of workpieces.

  • Volume Discount

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	18.00 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Index Plunger (Long Stroke) (NDXNE)

  IMAO CORPORATION

  As the nose length is long, It can be inserted deeply into the other side. Available in steel and stainless steel.
  
  [Features]
  - With the spring plunger hand operation, when the knob is pulled the nose retracts but can easily be released. Let go and the nose returns to the original state by means of the internal spring.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	18.60 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing Plunger IP-5

  KONISHI MFG

  Indexing plungers with a grip ball attached to the knob.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	20.38 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Index Plungers, Mini Indexes, Basic Type

  HALDER

  [Features]
  · Small index bolts are particularly well suited for mounting to thin objects.
  · On items with hold mechanisms, pull out the knob and rotate it 30° to hold.
  · Operating temperature range: -30 to 80°C.
  · Mounting method: screw in the screw area on the main body, then lift up the knob and use the hexagonal section to tighten it.
  · Increased screw size.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.90 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Index Bolt With Hexagon Collar, Locking / Stainless steel 1.4305 / nickel-plated / EH 22120.

  HALDER

  [Features]
  · For index holes.
  · Pull the knob and rotate 90 degrees to fix the pin in place in a withdrawn state using the notch.
  · Use distance collar (EH22120) to adjust the depth of the screw-in.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	28.47 €
  Min. Shipping Days ：	2 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Precision Index Plungers With Cylindrical Pin

  HALDER

  [Features]
  · This precision index bolt can be used in combination with bushings for speedy positioning and fixing in place.
  · Both parts are accurately finished, ensuring high repetition accuracy.
  · For specifications with hold mechanisms, pull the knob and rotate it 90 degrees.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	17.93 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing plunger, Steel / Plastic knob

  GANTER

  Type G or GK of the GN 617 indexing plungers have been designed for applications where the indexing plunger is not operated with the standard knob.
  The indexing plungers are designed such that the plunger set in the end position (spring is "on block") can also absorb axial forces. For applications in which these forces are substantially above the tensile force applied by the operator (Type G), GN 817 indexing plungers are to be preferred.
  

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	8.86 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing plungers with T-Handle

  GANTER

  Indexing plungers GN 817.4 are similar to GN 817, but with a T-handle instead of a round head.
  This shape allows better visual orientation of the indexing position of Type C and is advantageous when greater unlocking forces occur.
  Type C with rest position is used in such applications where the plunger must not protrude continually. In that case the knob is retracted and afterwards turned by 90°. A notch keeps the plunger in this position.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	9.50 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing Plungers / Removable / Steel / GN 817.8

  GANTER

  Indexing plungers GN 817.8 have been designed such that special versions of the indexing pins can also be made economically in smaller unit quantities.
  If reqired, the indexing pins can be machined or made by the user as shown in the drawing above. They are assembled with a countersunk screw and can therefore be assembled several times. All parts are supplied in a non-assembled set.
  The indexing plungers type C / CK are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	12.46 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing Plungers / Steel, Plastic-Knob / GN 817

  GANTER

  Indexing plungers GN 817 with rest position (Type C / CK) are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.80 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Mini indexing plungers, covered indexing mechanism / with and without rest position

  GANTER

  Mini indexing plungers GN 822.6 are distinguished for their small dimensions.
  Based on the principle of the GN 822 mini indexing plungers, this model combines their clever type of construction with a complete series of all current sizes of bolts and threads. They provide a reasonably priced alternative to the GN 607 / GN 607.1 indexing plungers of the appropriate sizes. To mount, first turn the mini indexing plunger in with the knurled button. Pulling the indexing pin will release the hexagon nut which can then be tightened with an open-end spanner.
  They are inserted into position by holding them by the serrated knob. The spanner flats on the lock nut are revealed when retracting the pin, so that the mini indexing plunger can be easily tightened by means of a fork spanner.
  In type C, the button can be turned by 30° after retracting the indexing pin, holding it in the “retraced” position using the indexing lock.
  

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.02 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Mini indexing plungers, covered indexing mechanism

  GANTER

  Mini indexing plungers GN 822 are distinguished for their small dimensions. They have been designed for installation in thin walled sheet metal constructions.
  They are inserted into position by holding them by the serrated knob. The spanner flats on the lock nut are revealed when retracting the pin, so that the mini indexing plunger can be easily tightened by means of a fork spanner.
  With Type C the knob can be turned by 30° and a notch keeps the knob in this position.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.36 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Spring bolts, Steel / Plastic knob

  GANTER

  The plunger of the spring bolts GN 313 does not protrude in the inoperative position.
  It can be operated manually or in Type D and DK mechanically (pneumatic cylinder, cam plate, etc.) when it will protrude only as long as it is operated.
  Using the internal thread at identification 2 on the pressure side, special pressure bolts or a rod arrangement can be operated, for instance.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	9.38 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Indexing plungers without collar Form T (K0635)

  KIPP

  · Indexing plungers facilitate indexing and locking
  
  · Application sectors: machine, instrument and fixture construction, measuring technology, domestic use
  
  · High stability
  
  · Key ring to operate the indexing plungers
  
  · Material: steel or stainless steel

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.57 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Indexing plungers without collar with extended pin Form H (K0633)

  KIPP

  · Indexing plungers facilitate indexing and locking
  
  · Application sectors: machine, instrument and fixture construction, measuring technology, domestic use
  
  · High stability
  
  · Material: steel or stainless steel

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.19 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing Plunger - PDV

  NABEYA BI-TECH

  [Features]
  · Index plunger to control the coming and going of the pin by turning the lever.
  · Standardized three types of operational variations.
  ■ [PDV-A] [PDV-AK]-Standard Type
  · The pin retracts into the body by turning the lever 90°.
  · Turn the lever slightly and the pin returns to its original position via the action of the integrated spring.
  ■ [PDV-B] [PDV-BK]-Retention Type
  · The pin retracts into the body by turning the lever 120°.
  · The pin will not return, even if the lever is released while in the 120° position.
  · Turn the lever slightly in the opposite direction and the pin will returned to its original position via the action of the integrated spring.
  ■ [PDV-C] [PDV-CK]-Lock Function Type
  · The pin retracts into the body turning the lever 120°.
  · The guide pin then fits into the slot on the main body, locking the unit with the pin retracted.
  · To unlock, pull the lever out slightly and rotate it in the opposite direction.
  · Turn the lever slightly and the pin returns to its original position via the action of the integrated spring.
  ■ [PDV-A] [PDV-B][PDV-C]-Without Lock Nut
  · Use loosening prevention service.
  ■ [PDV-AK] [PDV-BK][PDV-CK]-With Lock Nut for Fixing.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	66.16 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing Plunger PHY

  NABEYA BI-TECH

  Compact indexing plunger.
  
  [Features]
  - A compact indexing plunger.
  - Pull the knob and rotate 30° to lock with the pin retracted.
  - To unlock, pull the knob slightly and rotate 30°.
  - Returns to its original position via internal spring action.
  - Lock mechanism built into the knob.
  - Overall length is the same as a PHX without a lock mechanism.
  - Pin is nickel-plated for good abrasion resistance.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	17.53 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Index Plunger (Short Model) (NDXNS)

  IMAO CORPORATION

  The threaded part is short so it is ideal for mounting to plates, etc.
  
  [Features]
  - With the index plunger hand operation, when the knob is pulled the nose retracts but can easily be released. Let go and the nose returns to the original state by means of the internal spring.
  - Recess processing has been performed on the threaded part

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	17.62 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Index Plunger (Nose Lock Model) (GDX)

  IMAO CORPORATION

  The nose can be pulled out and put in by turning the lever, giving excellent operation efficiency. Steel and stainless steel types are provided.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	46.16 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Indexing Lever Plungers (Stainless Steel) ILP-Sus

  KONISHI MFG

  Rotate the lever 180° to retract the center pin and engage the lock. Use to calculate and adjust the position of jigs.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	111.02 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Index Bolts Simple Finish

  HALDER

  [Features]
  · Simple shape that does not require much space.
  · Only for use in situations that do not require a high degree of precision.
  · Operating temperature range: from -30 to +80°C, and up to +250°C on types with rings.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.15 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Stainless Steel-Mini indexing plungers

  GANTER

  Stainless Steel-Mini indexing plungers GN 822.7 are distinguished for their small dimensions.
  Based on the principle of the mini indexing plungers GN 822, this model combines their clever type of construction with a complete series of all current sizes of bolts and threads. They provide a reasonably priced alternative to the GN 607 / GN 607.1 indexing plungers of the appropriate sizes. To mount, first turn the mini indexing plunger in with the knurled button. Pulling the indexing pin will release the hexagon nut which can then be tightened with an open-end spanner.
  The spanner flats on the lock nut are revealed when retracting the pin, so that the mini indexing plunger can be easily tightened by means of a fork spanner.
  In type CN, the button can be turned by 30° after retracting the indexing pin, holding it in the “retraced” position using the indexing lock.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	14.56 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Indexing plungers with T-grip, without locking slot, without locknut, Form A (K1124)

  KIPP

  · Indexing plungers facilitate indexing and locking
  
  · Application sectors: machine, instrument and fixture construction, measuring technology, domestic use
  
  · High stability
  
  · Ergonomic grip
  
  · Material: steel or stainless steel

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.74 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Indexing plungers, steel or stainless steel with plastic cam lever and locknut (03090)

  NORELEM

  · Simple and quick operation
  
  · Suitable for high temperature applications
  
  · With integrated detent function

  Select to compare

  Configure now
  Starting from∗ ：	12.64 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing Plunger PXV

  NABEYA BI-TECH

  Turn the lever to control pin insertion on the indexing plunger.
  
  [Features]
  - Pin retracts into the body with a 180° turn of the lever.
  - Lever can be locked with a notch machined in the main body.
  - Ergonomic lever cap attached to the PXV-B/BK.
  - Hardened pin for good abrasion resistance.
  - PXV-A and PXV-B have no lock nut.
  - PXV-AK and PXV-BK have a lock nut for fixing.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	40.46 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Manual Handles, for positioning clamping pins

  HALDER

  The manual handle enables an easy and fast operation of the positioning clamping pin.
  

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	8.54 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Cam action indexing plungers, Steel

  GANTER

  Cam action indexing plungers GN 612 are used in cases where the locking pin must not protrude all the time. By rotating the lock through 180° the locking pin withdraws itself. A groove is provided in either position to prevent the lock from rotating.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	14.22 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing plungers, Steel, with red knob

  GANTER

  Indexing plungers GN 817 with rest position (Type C / CK) are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.80 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Mini indexing plungers Zinc die casting / Plastic-knob

  GANTER

  Mini indexing plungers GN 822.8 are distinguished for their small dimensions. They are mounted by countersunk screws.
  The mini indexing plungers present an affordable alternative to the GN 608 and GN 608.1 indexing plungers.
  In type C, the button can be turned by 30° after retracting the indexing pin, holding it in the “retraced” position using the indexing lock.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.24 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Mini indexing plungers, covered indexing mechanism, with red knob

  GANTER

  Mini indexing plungers GN 822 are distinguished for their small dimensions. They have been designed for installation in thin walled sheet metal constructions.
  They are inserted into position by holding them by the serrated knob. The spanner flats on the lock nut are revealed when retracting the pin, so that the mini indexing plunger can be easily tightened by means of a fork spanner.
  With type C the knob can be turned by 30° and a notch keeps the knob in this position.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.36 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Mini indexing plungers, open indexing mechanism, with red knob

  GANTER

  Mini indexing plungers GN 822.1 are distinguished for their small dimensions. They have been designed for installation in thin walled sheet metal constructions.
  Type C with rest position is used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.40 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Mini indexing plungers, Stainless Steel / Plastic knob

  GANTER

  Mini indexing plungers GN 822.7 are distinguished for their small dimensions.
  Based on the principle of the mini indexing plungers GN 822, this model combines their clever type of construction with a complete series of all current sizes of bolts and threads. They provide a reasonably priced alternative to the GN 607 / GN 607.1 indexing plungers of the appropriate sizes. To mount, first turn the mini indexing plunger in with the knurled button. Pulling the indexing pin will release the hexagon nut which can then be tightened with an open-end spanner.
  They are inserted into position by holding them by the serrated knob. The spanner flats on the lock nut are revealed when retracting the pin, so that the mini indexing plunger can be easily tightened by means of a fork spanner.
  In type C, the button can be turned by 30° after retracting the indexing pin, holding it in the “retraced” position using the indexing lock.
  

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.46 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Stainless Steel-Cam action indexing plungers, with locking function

  GANTER

  For GN 721.5 Stainless Steel-Cam action indexing plungers the indexing plunger pin is withdrawn by turning the lock by 180°.
  When the cam action indexing plungers are positioned symmetrically, the left or right handed types allow for a practical, i.e. equal, direction setting of the lock.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	22.30 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Stainless Steel-Indexing plungers / with rest position / GN 617.1

  GANTER

  Stainless Steel-Indexing plungers GN 617.1 with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.
  

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	30.50 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

Loading...