Indexing Plungers（Page 7）

?* Information on days to ship and prices

• • Promotional pricing

  

  Indexing plungers for welding, without rest position

  GANTER

  Indexing plungers GN 607.4 are designed for welded fixing, in particular for use in steel square tubings.
  The lug d2 is intended for positioning.
  The plastic knob with the in-moulded indexing pin is driven on after the welding process.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	14.96 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Indexing plungers with rest position, for thin walled equipment

  GANTER

  Indexing plungers GN 607.3 have been developed for installation in thin walled equipment.
  It has to be taken into consideration that, depending on the mounting plate thickness 's', the protruding plunger length 'l1' and the position of the hexagon nut on its centre bush, the plunger nose might not always be fully retractable.
  For design reasons the positional accuracy of this indexing plunger is not as precise as plunger GN 607.
  Indexing plungers with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.
  

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	20.32 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing plungers without thread, Steel / Plastic knob

  GANTER

  Indexing plungers GN 618 without thread are for applications where welding, resin bonding (Loctite) or clamping is favoured.
  Type G has been designed for applications where the indexing plunger is not operated with the standard knob.
  The indexing plungers are designed such that the plunger set in the end position (spring is "on block") can also absorb axial forces. For applications in which these forces are substantially above the tensile force applied by the operator (Type G), additional information can be submitted on request.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	8.66 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing plungers, plunger conical

  GANTER

  Indexing plungers GN 817.5 allow highly accurate positioning, with the guidance made by the positioning bushings DIN 172 / DIN 179 with cylindrical bore. The actual indexing bore is fitted with positioning bushings GN 172.1 / GN 179.1 with conical bores.
  The conical shape of the indexing pin / the indexing bore makes the positioning virtually clearance-free and therefore highly precise.
  Type C is used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	35.32 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Indexing plungers, Stainless Steel / plastic knob

  GANTER

  Type G or GK of the indexing plungers GN 613 have been designed for applications where the indexing plunger is not operated with the standard knob.
  The indexing plungers are designed such that the plunger set in the end position (spring is "on block") can also absorb axial forces. For applications in which these forces are substantially above the tensile force applied by the operator (Type G), GN 817 indexing plungers are to be preferred.
  A special screw driver GN 613.1 is available. Two slots are provided in the upper end of the body which are accessible with the knob in its retracted position.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	11.28 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing plungers, Stainless Steel / Plastic-knob / with rest position

  GANTER

  Stainless Steel-Indexing plungers GN 607.1 with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.
  Stainless Steel-Indexing plungers GN 607.1 are distinguished for their small dimensions. The extremely low Stainless Steel-Lock nuts GN 909.5 enlarge the mounting options. The locking tab is an integral part of the knob thus giving reliable operation at all times.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	23.32 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing plungers, Stainless Steel / Plastic-knob / without rest position

  GANTER

  Stainless Steel-Indexing plungers GN 607 are distinguished for their small dimensions.
  The extremely low Stainless Steel-Lock nuts GN 909.5 enlarge the mounting options.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	15.32 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing plungers, Steel / long Plastic-knob

  GANTER

  Indexing plungers GN 817.2 correspond to GN 817, they only differ by a longer knob.
  Type C / CK are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	9.70 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Indexing plungers, Steel / plastic knob

  GANTER

  Type G or GK of the GN 613 indexing plungers have been designed for applications where the indexing plunger is not operated with the standard knob.
  The indexing plungers are designed such that the plunger set in the end position (spring is "on block") can also absorb axial forces. For applications in which these forces are substantially above the tensile force applied by the operator (Type G), GN 817 indexing plungers are to be preferred.
  A special screw driver GN 613.1 is available. Two slots are provided in the upper end of the body which are accessible with the knob in its retracted position.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.60 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing plungers, Steel / Plastic-knob / without rest position

  GANTER

  Indexing plungers GN 607 are distinguished for their small dimensions.
  The extremely low lock nuts GN 909 enlarge the mounting options.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	10.46 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Indexing plungers, Steel / Plastic-knob / with or without rest position

  GANTER

  Indexing plungers GN 817.1 (Type C) are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	10.42 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Key for locking plungers / 816.1-10

  GANTER

  For locking plungers GN 816.1 with operation with key (Type B / BK) this key is required to move the plunger. Locking plungers Ø 6 and 8 have the same key GN 816.1-10.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.72 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Key for locking plungers / 816-10

  GANTER

  For locking plungers GN 816 with operation with key (Type B / BK) this key is required to move the plunger. Locking plungers Ø 6 and 8 have the same key GN 816-10.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.70 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Locking plungers, Plunger retracted

  GANTER

  If not operated, the plunger of the locking plungers GN 816.1 is retracted. To move out, move against the spring force and hold in the end position by turning by 90°.
  The shape of the cam curve secures the plunger against accidental operation.
  When operating the button (Type AR / ARK), the visible red covering sleeve indicates the locking status: Indexing pin does not protrude.
  For the execution with operation with key (Type B / BK) a key is required to move the plunger. In this execution, a cover sleeve provides additional security and safety from unauthorized removal of the locking plunger. The cover sleeve also provides additional protection against malfunction caused by dirt.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	19.92 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Screw drivers for GN 613

  GANTER

  [Specifications]
  ・Type: 613.1
  
  Type G or GK of the GN 613 indexing plungers have been designed for applications where the indexing plunger is not operated with the standard knob. The indexing plungers are designed such that the plunger set in the end position (spring is „on block“) can also absorb axial forces. For applications in which these forces are substantially above the tensile force applied by the operator (Type G), GN 817 indexing plungers are to be preferred.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	10.32 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Stainless Steel-Cam action indexing plungers, with locking function

  GANTER

  For GN 721.5 Stainless Steel-Cam action indexing plungers the indexing plunger pin is withdrawn by turning the lock by 180°.
  When the cam action indexing plungers are positioned symmetrically, the left or right handed types allow for a practical, i.e. equal, direction setting of the lock.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	22.30 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Stainless Steel-Indexing plungers / with lever, with and without rest position / GN 7017

  GANTER

  GN 7017 Stainless Steel-Indexing plungers are activated through a lever and are characterized by small dimensions. These indexing plungers are universally applicable due to their prevention of misalignments and positioning errors of the mating indexing bores.
  The type C / CK with rest position are used for such applications where the plunger has to stay in its retracted position.
  During assembly, the max. tightening torques shown in the table should not be exceeded when securing the lock nut.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	8.72 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Index Plungers, with rapid locking head

  HALDER

  Index plungers are used for indexing bores.
  
  [Operation]
  The locking pin is drawn in and locked by pulling the knob. The projecting red press button indicates the locking position (locking pin drawn in). Pushing the red press button causes the locking pin to jump back into the locking position.

  Select to compare

  Configure now
  Starting from∗ ：	19.27 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Indexing plungers, flange surface mounting, right-angled the plunger

  GANTER

  [Specifications]
  ・Type: A. with pull ring
  
  With indexing plungers GN 722.5, the plunger pin is actuated via the pull ring. This is done either manually, with a cable or by means of an extended pull rod with hook. The ZB and SW versions are designed for applications in steel construction, whereas the A4 stainless steel version is suitable for use in particularly aggressive environments.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	20.60 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Stainless Steel-Indexing plungers with red knob / GN 8170

  GANTER

  [Specifications]
  ・Type: B. without rest position, C. with rest position
  ・Material (Sealing ring): H. H-NBR
  
  Stainless steel indexing plungers GN 8170 are intended for use in hygienic areas and meet hygiene requirements on the knob side (front hygiene). Wipers between the knob and the guide as well as the sealing ring between the guide and the housing keep the locking mechanism on the knob side leak-tight. At the same time, the high surface quality (Ra < 0,8 um) and dead-space-free mounting prevent dirt from adhering and facilitate cleaning.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	84.62 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Stainless Steel-Indexing plungers, Knob pin side Hygienic Design (full hygie

  GANTER

  [Specifications]
  ・Type: B. without rest position, C. with rest position
  ・Material: ST. Steel precision casting
  
  Stainless steel indexing plungers GN 8170 are intended for use in hygienic areas, and with their additional sealing nuts, they meet hygiene requirements on the knob and pin sides (complete hygiene). Wipers between knob and guide and between guide and pin as well as sealing rings on the guide and sealing nut keep the locking mechanism leak-tight. At the same time, the high surface quality (Ra < 0,8 um) and dead-space-free mounting prevent dirt from adhering and facilitate cleaning.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	111.60 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Stainless Steel-Indexing plungers for welding, removable / GN 722.4

  GANTER

  [Specifications]
  ・Type: A. with pull ring, A. with pull ring. mounted, AU. with pull ring. unmounted
  ・Material: A4. Stainless Steel precision casting
  
  With indexing plungers GN 722.4, the plunger pin is actuated via the pull ring. This is done either manually, with a cable or by means of an extended pull rod with hook. The ST version is designed for applications in steel construction, whereas the A4 stainless steel version is suitable for use in particularly aggressive environments.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	26.48 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Actuating elements for Indexing plunger with remote actuation, Form D (K1502)

  KIPP

  · Actuation possible in inaccessible assembly spaces
  
  · Ergonomically optimised actuating position possible
  
  · Actuation possible even when safety distances are required
  
  · Easy replacement of wear parts
  
  · Flexible connection of an actuating element

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	39.25 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Cam-action indexing plungers stainless steel (K0640)

  KIPP

  · Can be used for all types of locking and fixating
  
  · The lock is released by turning the grip 180°
  
  · Indexing notch for holding the position
  
  · Stainless steel 1.4308, 1.4305, 1.4301

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	15.20 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Cam-action indexing plungers with stop stainless steel, Form A (K1285)

  KIPP

  · Can be used for all types of locking and fixating
  
  · The lock is released by turning the grip 180°
  
  · 180° stop prevents the indexing pin extending
  
  · Indexing notch for holding the position

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	18.19 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Cam-action indexing plungers with stop stainless steel, Form B (K1285)

  KIPP

  · Can be used for all types of locking and fixating
  
  · The lock is released by turning the grip 180°
  
  · 180° stop prevents the indexing pin extending
  
  · Indexing notch for holding the position

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	18.60 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Cam-action indexing plungers with stop, Form A and C (K1284)

  KIPP

  · Can be used for all types of locking and fixating
  
  · The lock is released by turning the grip 180°
  
  · 180° stop prevents the indexing pin extending
  
  · Indexing notch for holding the position
  
  · Indexing pin hardened

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	14.56 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Indexing plunger with status sensor, Form C (K1495)

  KIPP

  · No interference contours
  
  · Intelligent battery management enables long runtime
  
  · Elimination of complex cabling
  
  · Wireless transmission of the actuation status

  Select to compare

  Configure now
  Starting from∗ ：	134.39 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Indexing plunger with status sensor, Form D (K1495)

  KIPP

  · No interference contours
  
  · Intelligent battery management enables long runtime
  
  · Elimination of complex cabling
  
  · Wireless transmission of the actuation status

  Select to compare

  Configure now
  Starting from∗ ：	134.39 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Indexing plungers - Premium with cylindrical pin, Form A (K0736)

  KIPP

  · Higher processing requirements
  
  · Centring on the threaded sleeve for positioning accuracy
  
  · Indexing plungers facilitate indexing and locking
  
  · Application sectors: machine, instrument and fixture construction, measuring technology, domestic use
  
  · High stability
  
  · Material: steel or stainless steel

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	18.29 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Indexing plungers - Premium with cylindrical pin, Form B (K0736)

  KIPP

  · Higher processing requirements
  
  · Centring on the threaded sleeve for positioning accuracy
  
  · Indexing plungers facilitate indexing and locking
  
  · Application sectors: machine, instrument and fixture construction, measuring technology, domestic use
  
  · High stability
  
  · Material: steel or stainless steel

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	18.45 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Indexing plungers - Premium with cylindrical pin, Form C (K0736)

  KIPP

  · Higher processing requirements
  
  · Centring on the threaded sleeve for positioning accuracy
  
  · Indexing plungers facilitate indexing and locking
  
  · Application sectors: machine, instrument and fixture construction, measuring technology, domestic use
  
  · High stability
  
  · Material: steel or stainless steel

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	20.13 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Indexing plungers - Premium with tapered pin, Form B (K0736)

  KIPP

  · Higher processing requirements
  
  · Indexing plungers facilitate indexing and locking
  
  · Application sectors: machine, instrument and fixture construction, measuring technology, domestic use
  
  · High stability
  
  · Material: steel or stainless steel

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	18.85 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Indexing plungers Form A (K0339)

  KIPP

  · Indexing plungers facilitate indexing and locking
  
  · Application sectors: machine, instrument and fixture construction, measuring technology, domestic use
  
  · High stability
  
  · Material: steel or stainless steel

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.62 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Indexing plungers Form A (K0747)

  KIPP

  · Indexing plungers facilitate indexing and locking
  
  · Application sectors: machine, instrument and fixture construction, measuring technology, domestic use
  
  · High stability
  
  · Material: steel or stainless steel
  
  · Inexpensive version

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.69 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Indexing plungers Form B (K0747)

  KIPP

  · Indexing plungers facilitate indexing and locking
  
  · Application sectors: machine, instrument and fixture construction, measuring technology, domestic use
  
  · High stability
  
  · Material: steel or stainless steel
  
  · Inexpensive version

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.76 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Indexing plungers Form C (K0339)

  KIPP

  · Indexing plungers facilitate indexing and locking
  
  · Application sectors: machine, instrument and fixture construction, measuring technology, domestic use
  
  · High stability
  
  · Material: steel or stainless steel

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	9.59 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Indexing plungers Form C (K0747)

  KIPP

  · Indexing plungers facilitate indexing and locking
  
  · Application sectors: machine, instrument and fixture construction, measuring technology, domestic use
  
  · High stability
  
  · Material: steel or stainless steel
  
  · Inexpensive version

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.80 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Indexing plungers Form R (K0342)

  KIPP

  · Indexing plungers facilitate indexing and locking
  
  · Application sectors: machine, instrument and fixture construction, measuring technology, domestic use
  
  · High stability
  
  · Key ring to operate the indexing plungers
  
  · Material: steel or stainless steel

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.19 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Indexing plungers Form S (K0342)

  KIPP

  · Indexing plungers facilitate indexing and locking
  
  · Application sectors: machine, instrument and fixture construction, measuring technology, domestic use
  
  · High stability
  
  · Key ring to operate the indexing plungers
  
  · Material: steel or stainless steel

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.27 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Indexing plungers stainless steel without collar Form G (K0634)

  KIPP

  · Indexing plungers facilitate indexing and locking
  
  · Application sectors: machine, instrument and fixture construction, measuring technology, domestic use
  
  · High stability
  
  · Stainless steel 1.4305, 1.4034

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	13.71 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Indexing plungers stainless steel without collar Form H (K0634)

  KIPP

  · Indexing plungers facilitate indexing and locking
  
  · Application sectors: machine, instrument and fixture construction, measuring technology, domestic use
  
  · High stability
  
  · Stainless steel 1.4305, 1.4034

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	15.00 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Indexing plungers steel or stainless steel with status sensor, hardwired, Form A (K1744)

  KIPP

  · electronic status monitoring
  
  · No interfering edges
  
  · short switching distance

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	89.83 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Indexing plungers steel or stainless steel with status sensor, hardwired, Form B (K1744)

  KIPP

  · electronic status monitoring
  
  · No interfering edges
  
  · short switching distance

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	89.83 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Indexing plungers steel or stainless steel with status sensor, hardwired, Form C (K1744)

  KIPP

  · electronic status monitoring
  
  · No interfering edges
  
  · short switching distance

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	91.82 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

Loading...