Indexing Plungers

?* Information on days to ship and prices

• • Promotional pricing ends 31/12/2024

  

  Index Bolt With Mounting Flange, Horizontal

  HALDER

  [Features]
  · Use washers (For example, ISO7092) for mounting.
  · On types with locks, rotate the knob 90 degrees to stop the notch moving.
  On types with holding mechanisms, pull the knob and rotate it approximately 70 degrees to keep the pin in its withdrawn state.
  · Operating temperature range: -30 to +80°C.
  · Up to 100°C on types with rings.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.91 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Index Bolt With Hexagon Collar And Locking

  HALDER

  [Features]
  · For index holes.
  · Use the distance collar (EH22120) to adjust the depth of the screw-in.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.30 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Indexing Plungers, PBX

  NABEYA BI-TECH

  Indexing plungers integrated with a mounting flange. Suitable for mounting to panel surfaces on equipment/devices, etc.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	17.32 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Indexing Plungers (NDXN-ASUS)

  IMAO CORPORATION

  Made entirely of stainless steel, this product is ideal for areas demanding rust-proofing as well as clean environments. Two types of noses are available: hardened and non-hardened.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	38.53 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Indexing Plunger - PDV

  NABEYA BI-TECH

  [Features]
  · Index plunger to control the coming and going of the pin by turning the lever.
  · Standardized three types of operational variations.
  ■ [PDV-A] [PDV-AK]-Standard Type
  · The pin retracts into the body by turning the lever 90°.
  · Turn the lever slightly and the pin returns to its original position via the action of the integrated spring.
  ■ [PDV-B] [PDV-BK]-Retention Type
  · The pin retracts into the body by turning the lever 120°.
  · The pin will not return, even if the lever is released while in the 120° position.
  · Turn the lever slightly in the opposite direction and the pin will returned to its original position via the action of the integrated spring.
  ■ [PDV-C] [PDV-CK]-Lock Function Type
  · The pin retracts into the body turning the lever 120°.
  · The guide pin then fits into the slot on the main body, locking the unit with the pin retracted.
  · To unlock, pull the lever out slightly and rotate it in the opposite direction.
  · Turn the lever slightly and the pin returns to its original position via the action of the integrated spring.
  ■ [PDV-A] [PDV-B][PDV-C]-Without Lock Nut
  · Use loosening prevention service.
  ■ [PDV-AK] [PDV-BK][PDV-CK]-With Lock Nut for Fixing.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	66.16 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Indexing Plunger IP-5

  KONISHI MFG

  Indexing plungers with a grip ball attached to the knob.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	20.38 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Indexing Plunger IP-6

  KONISHI MFG

  Indexing plungers with no tee handle attached to the knob.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	28.82 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Index Plunger PMX

  NABEYA BI-TECH

  Simple structure index plunger.
  [Features]
  · Superior cost performance.
  · For all pin diameters, coarse thread and fine thread are standardized.
  · Can select main body material quality and whether or not to include a lock nut using the product code.
  [Applications]
  · For positioning workpieces.
  · For attaching and detaching workpieces.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	12.29 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Indexing Plungers Simple Ring Type IPR

  KONISHI MFG

  Pulling the ring retracts the center pin; releasing it returns the center pin to its original position by using the force of the spring. Can be used to calculate and select the position of jigs.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	16.81 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Indexing Plungers Simple Type IP

  KONISHI MFG

  Pulling the knob retracts the center pin; releasing it returns it to its original position via spring force. Use to calculate and adjust jig positions.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	16.82 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Indexing Plunger (Stainless Steel) IP-1-Sus

  KONISHI MFG

  Pulling the knob retracts the center pin; releasing it returns it to its original position via spring force. Use to calculate and adjust jig positions.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	27.28 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Indexing Plunger PHX

  NABEYA BI-TECH

  [Features]
  - Compact indexing plunger.
  - Metal part unexposed after mounting.
  - Nickel-plated pin.
  - Superior abrasion resistance.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	16.15 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Indexing Plunger PXX

  NABEYA BI-TECH

  Indexing or positioning pin. Good abrasion resistance.
  
  [Features]
  - Indexing or positioning pin.
  - New standards for [PXXS-S] and [PXXS-SK] with stainless steel knobs.
  - Pin is hardened (steel) or nickel-plated (stainless steel). Excels in abrasion resistance.
  - If the threaded part is too long for the mounting surface, use the [PXC] indexing plunger collar instead.
  - Use a locking service for fixing indexing plungers.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	19.55 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Indexing Plunger PPLX

  NABEYA BI-TECH

  [Features]
  - Indexing plunger for accurate positioning.
  - H7 pin diameter tolerance.
  - G6 hole tolerance recommended for the mating side.
  - Use with the positioning bushings for precise positioning.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	83.83 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Index Plunger (With No Knob) (NDX-N)

  IMAO CORPORATION

  The operating unit can be remotely operated by connecting with screws. Available in steel and stainless steel.
  
  [Features]
  - A hand operated spring plunger where you pull the knob and the nose retracts to easily release the positioning, while if the knob is released, it reverts to the original state by the force of the internal spring.
  - If performing remote operation, it can be joined with the operation screw part.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	21.04 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Index Plunger (NDXN)

  IMAO CORPORATION

  It is a classic index plunger with excellent cost performance. Various types are available such as a nose hardening type, no baking type, etc.
  
  [Features]
  - It is a manual spring plunger. If you pull the knob the nose retracts and the position is determined and release it easy, when you release your hand it returns to the original state by the built-in spring.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	13.96 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Index Plunger (Short Model) (NDXNS)

  IMAO CORPORATION

  The threaded part is short so it is ideal for mounting to plates, etc.
  
  [Features]
  - With the index plunger hand operation, when the knob is pulled the nose retracts but can easily be released. Let go and the nose returns to the original state by means of the internal spring.
  - Recess processing has been performed on the threaded part

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	17.62 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Index Plunger (With No Knob) (SDX-N)

  IMAO CORPORATION

  The operating unit can be remotely operated by connecting with screws. There is no hexagonal part so it can be mounted in a small space. Available in steel and stainless steel.
  
  [Features]
  - A hand operated spring plunger where you pull the knob and the nose retracts to easily release the positioning, while if the knob is released, it reverts to the original state by the force of the internal spring.
  - If performing remote operation, it can be joined with the operation screw part.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	17.34 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Indexing Plunger IP-1

  KONISHI MFG

  Pulling the knob retracts the center pin; releasing it returns it to its original position via spring force. Use to calculate and adjust jig positions.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	12.25 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Indexing Plunger PSX

  NABEYA BI-TECH

  Short type that can be mounted directly to a thin frame.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	24.07 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Indexing Plungers, PCV

  NABEYA BI-TECH

  Index plungers with pins incorporated into the main body. The pins move in and out by turning the lever.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	66.47 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Indexing Plunger - PFX

  NABEYA BI-TECH

  [Features]
  · A flanged type indexing plunger that is mounted using countersunk bolts and rivets etc.
  · The long pin type PFX-H-A (long pin type) is ideal for mounting thick panels and frames etc.
  · The pin has undergone hardening and offers excellent abrasion resistance.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	24.77 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Indexing Plunger PLX

  NABEYA BI-TECH

  Two types of standardized stroke for each pin diameter. For indexing or positioning.
  
  [Features]
  - Two types of standardized stroke for each pin diameter (except for ⌀10 and ⌀12).
  - For indexing or positioning.
  - Pin is hardened (steel) or nickel-plated (stainless steel). Excellent abrasion resistance.
  - If the threaded part is too long for the mounting surface, use the PXC indexing plunger collar instead.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	12.68 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Indexing Plunger PPX

  NABEYA BI-TECH

  [Features]
  - Indexing plunger that can be mounted on a thin plate.
  - Optimal for positioning and fixing the cases/covers of electronic/communication equipment.
  - Fixing nut can be removed.
  - Mount with a plate clamped with the fixing nut.
  - Two types of pin lengths standardized for each pin diameter.
  - Nickel-plated pin.
  - Superior abrasion resistance.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	53.02 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Indexing Plunger PXZ

  NABEYA BI-TECH

  [Features]
  - All main body threads can be embedded in equipment; only the knob is exposed.
  - Attractive look.
  - Hardened (steel) or nickel-plated (stainless steel).
  - Superior abrasion resistance.
  - New standardization for PXZS-Z and PXZS-SK with stainless steel knob.
  - Use a locking service for fixing indexing plungers.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	17.61 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Index Plunger (NDX)

  IMAO CORPORATION

  Standard index plunger. Available in steel and stainless steel.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	25.97 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Engineering Plastics Index Plunger (EIP)

  IMAO CORPORATION

  Because everything other than the nose is made of resin, it is ideal not only for for industrial machinery, but also for uses such as health care instruments, assistive devices, and in the furniture field, etc.
  
  [Features]
  - The body is made of resin and so is lightweight.
  - It is optimal for places that do not tolerate rust.
  - With the spring plunger hand operation, when the knob is pulled the nose retracts but can easily be released. Let go and the nose returns to the original state by means of the internal spring.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	12.90 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Index Plunger (SDX)

  IMAO CORPORATION

  Features
  - There is no hexagonal part so it can be mounted in a small space.
  - Mounting is easy by using the special wrench (SDX-Z).
  - Full thread type

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	17.41 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Index Plunger (SDXN)

  IMAO CORPORATION

  No hexagonal part, so can be mounted to conserve space. Can be mounted with special wrench (SDX-Z).
  
  [Features]
  - Hand operated spring plunger. When the knob is pulled the nose retracts but can easily be released. Let go and the nose returns to the original state by means of the internal spring.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	13.69 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Index Plunger (WDX)

  IMAO CORPORATION

  Fusion bonding and welding types.
  
  [Features]
  - A hand operated spring plunger. Pull the knob and the nose retracts, easily cancelling the positioning; let go of the knob and the nose will return to its original position by the internal spring.
  - The nose locking type can be locked (fixed) by rotating the knob 90° while it is pulled out and the nose is retracted.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	21.85 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Indexing Plungers Flange Type IPF

  KONISHI MFG

  Pulling the knob retracts the center pin; releasing it returns it to its original position via spring force. An index plunger with a fixed countersunk screw.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	33.74 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Indexing Plungers Without Hexagonal Collar IPN, IPN-Sus

  KONISHI MFG

  Pulling the knob retracts the center pin; releasing it returns it to its original position via spring force. Use to calculate and adjust jig positions. All screws are embedded into the device, only leaving the knob on the surface and making it look more attractive.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	33.28 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Indexing Plungers IPW

  KONISHI MFG

  Pulling the knob retracts the center pin; releasing it returns it to its original position via spring force. Use to calculate and adjust jig positions when welding or fuse mounting.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	23.04 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Indexing Plungers IPWN

  KONISHI MFG

  Pulling the knob retracts the center pin; releasing it returns it to its original position via spring force. Use to calculate and adjust jig positions when welding or fuse mounting.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	40.83 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Indexing Plunger IP-3

  KONISHI MFG

  This is a buttonless indexing plunger (IP-3). A lock nut is included.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	17.63 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Indexing Plunger IP-4

  KONISHI MFG

  This is a buttonless indexing plunger (IP-4). A lock nut is included.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	22.97 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

Loading...