Single Axis Robots（Usage Environment：Standard Page 2）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Configure now
Min. Shipping Days ： 19 Days -
Configure now
Min. Shipping Days ： 14 Days -
Configure now
Min. Shipping Days ： 14 Days -
Configure now
Min. Shipping Days ： 14 Days -
Configure now
Min. Shipping Days ： 14 Days -
Configure now
Min. Shipping Days ： 19 Days -
Electric actuator slider type ball screw drive LEFS series AC servo motor LECY□
SMC
[Features]
·Easy to install the main body / reduce installation man-hours
·The main body can be installed without removing exterior parts such as covers.
·Table position can be detected by auto switch
·Up to 4 locations can be attached to both sides of the body
·Ball screw drive- 2D / 3D CAD data available
Configure nowStarting from∗ ： 1,513.19 € Min. Shipping Days ： 26 Days *Unit price with basic configuration
-
Electric actuator high rigidity slider type belt drive LEJB series AC servo motor LECS□
SMC
[Features]
·Thin low center of gravity
·High precision / high rigidity
·Reduction of installation man-hours
·Weight reduced by about 37%
·No interference with the workpiece motor
·Belt drive- 2D / 3D CAD data available
Configure nowStarting from∗ ： 2,232.19 € Min. Shipping Days ： 26 Days *Unit price with basic configuration
-
Electric actuator high rigidity slider type belt drive LEJB series AC servo motor LECY□
SMC
[Features]
·Thin low center of gravity
·High precision / high rigidity
·Reduction of installation man-hours
·Weight reduced by about 37%
·No interference with the workpiece motor
·Belt driveConfigure nowStarting from∗ ： 2,392.26 € Min. Shipping Days ： 26 Days *Unit price with basic configuration
-
Electric actuator rod type with guide LEYG series AC servo motor LECY□
SMC
[Features]
·The guide rod is compactly integrated to achieve lateral load resistance and high-precision detent.
·Tip lateral load: 5 times (Comparison of rod type, size 25, 100 strokes)
·Compatible with plain bearings and ball bush bearings
·Pressing control can be switched
Can be held with the rod pressed against the work, etc.Configure nowStarting from∗ ： 1,570.63 € Min. Shipping Days ： 26 Days *Unit price with basic configuration
-
Compact Electric Cylinder, DRS2 Series
ORIENTAL MOTOR
The DRS2 Series uses the AlphaStep AZ Series with an ABZO sensor mounted on the drive motor. The ABZO sensor is a mechanical multi-turn absolute sensor that eliminates the need for an external sensor. The DRS2 Series contribute to space saving and wire saving in addition to making the device smaller and weight reduction.
The DRS2 Series contribute to space saving and wire saving in addition to making the device smaller and weight reduction.
[Features]
・ Ideal for minute feeding and accuracy positioning
・ Reduced time to device startup
・ Equipped with ABZO sensor for more space saving and wire saving
・ Full pushing operationConfigure nowStarting from∗ ： 864.43 € Min. Shipping Days ： 18 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days |
| Main Body, Peripheral Components |
| Type |
| Stroke(mm) |
| Max. Transportable Mass Range (Horizontal)(kg) |
| Max. Transportable Mass (Horizontal)(kg) |
| Max. Transportable Mass Range (Vertical)(kg) |
| Max. Transportable Mass (Vertical)(kg) |
| Drive Method |
| Guide |
| Lead(mm) |
| Input Power Supply |
| Position Detection |
| I/O Module |
| Table Width W1(mm) |
| Brake |
| Max. Thrust Force Range(N) |
| Max. Thrust Force(N) |
| Noise Filters |
| Table Length L1(mm) |
| Usage Environment |
| Positioning Repeatability(µm) |
| Maximum Velocity(mm/sec) |
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | SMC | SMC | SMC | SMC | ORIENTAL MOTOR |
| Product Series | Electric actuator slider type ball screw drive LEFS series AC servo motor LECY□ | Electric actuator high rigidity slider type belt drive LEJB series AC servo motor LECS□ | Electric actuator high rigidity slider type belt drive LEJB series AC servo motor LECY□ | Electric actuator rod type with guide LEYG series AC servo motor LECY□ | |||||||
| CAD |
|
|
|
|
|
|
|
| |||
| Starting from∗ | - | - | - | - | - | - | 1,513.19 € *Unit price with basic configuration | 2,232.19 € *Unit price with basic configuration | 2,392.26 € *Unit price with basic configuration | 1,570.63 € *Unit price with basic configuration | 864.43 € *Unit price with basic configuration |
| Min. Shipping Days | 19 Days | 14 Days | 14 Days | 14 Days | 14 Days | 19 Days | 26 Days | 26 Days | 26 Days | 26 Days | 18 Days |
| Main Body, Peripheral Components | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body |
| Type | Sliders | Sliders | Rods | Rods | Rods | Sliders | Sliders | Sliders | Sliders | Rods | Rods |
| Stroke(mm) | 150 ～ 1050 | 50 ～ 800 | 50 ～ 300 | 50 ～ 300 | 50 ～ 200 | 150 ～ 1050 | 1,000 ～ 900 | 1,000 ～ 3000 | 1,000 ～ 3000 | 50 ～ 300 | 50 |
| Max. Transportable Mass Range (Horizontal)(kg) | 20.1 to 50.0 / 50.1 to 100.0 | 2.1 to 5.0 / 5.1 to 10.0 | 20.1 to 50.0 | 20.1 to 50.0 / 50.1 to 100.0 | 5.1 to 10.0 / 10.1 to 20.0 | 10.1 to 20.0 / 20.1 to 50.0 / 50.1 to 100.0 | 5.1 to 10.0 / 10.1 to 20.0 / 20.1 to 50.0 / 50.1 to 100.0 | 5.1 to 10.0 / 10.1 to 20.0 / 20.1 to 50.0 | 5.1 to 10.0 / 10.1 to 20.0 / 20.1 to 50.0 | 10.1 to 20.0 / 20.1 to 50.0 / 50.1 to 100.0 | 20.1 to 50.0 |
| Max. Transportable Mass (Horizontal)(kg) | 30 ～ 80 | 4 ～ 10 | 25 ～ 40 | 50 ～ 60 | 10 ～ 20 | 15 ～ 80 | 10 ～ 60 | 10 ～ 30 | 10 ～ 30 | 18 ～ 60 | - |
| Max. Transportable Mass Range (Vertical)(kg) | - | 0 to 2.0 | 2.1 to 5.0 / 10.1 to 20.0 / 20.1 to 50.0 | 5.1 to 10.0 / 10.1 to 20.0 / 20.1 to 50.0 | 2.1 to 5.0 / 5.1 to 10.0 | 2.1 to 5.0 / 5.1 to 10.0 / 10.1 to 20.0 | 2.1 to 5.0 / 5.1 to 10.0 / 10.1 to 20.0 / 20.1 to 50.0 | - | - | 5.1 to 10.0 / 10.1 to 20.0 / 20.1 to 50.0 | 20.1 to 50.0 |
| Max. Transportable Mass (Vertical)(kg) | - | 1 ～ 2 | 5 ～ 25 | 10 ～ 30 | 3.5 ～ 7.5 | 4 ～ 20 | 4 ～ 30 | - | - | 7 ～ 44 | 50 |
| Drive Method | Rolled Ball Screw | Rolled Ball Screw | Rolled Ball Screw | Rolled Ball Screw | Rolled Ball Screw | Rolled Ball Screw | Rolled Ball Screw | Belts | Belts | Rolled Ball Screw | Rolled Ball Screw |
| Guide | - | - | Not Provided | Not Provided | Provided | Provided | Provided | Provided | Provided | Provided | Not Provided |
| Lead(mm) | 5 ～ 20 | 6 ～ 20 | 2 ～ 12 | 2 ～ 12 | 6 ～ 12 | 5 ～ 30 | 6 ～ 30 | 27 ～ 42 | 27 ～ 42 | 4 ～ 12 | 4 |
| Input Power Supply | Single-Phase, 200 to 230 V AC | 24 V DC | 24 V DC | 24 V DC | 24 V DC | Single-Phase, 200 to 230 V AC | - | - | - | - | 24/48 V DC |
| Position Detection | Incremental / Absolute | Incremental | Incremental | Incremental | Incremental | Incremental / Absolute | Absolute | Incremental / Absolute | Absolute | Absolute | Absolute |
| I/O Module | NPN / PNP / CC-Link / DeviceNet | NPN / PNP / CC-Link / DeviceNet | - | - | - | NPN / PNP / CC-Link / DeviceNet | - | - | - | - | Not Provided |
| Table Width W1(mm) | 80 | 50 | - | - | - | 94 | 50 ～ 74 | 105 ～ 129 | 105 ～ 129 | - | - |
| Brake | Not Provided | Not Provided / Provided | Not Provided / Provided | Not Provided / Provided | Not Provided / Provided | Not Provided | Not Provided / Provided | Not Provided / Provided | Not Provided / Provided | Not Provided / Provided | Not Provided / Provided |
| Max. Thrust Force Range(N) | 0 to 100 / 101 to 200 / 301 to 500 | 0 to 100 | 101 to 200 / 201 to 300 / 501 to 1000 | 201 to 300 / 501 to 1000 | 0 to 100 | 301 to 500 | 0 to 100 / 101 to 200 / 201 to 300 / 301 to 500 / 501 to 1000 | 0 to 100 / 101 to 200 / 201 to 300 | 0 to 100 / 101 to 200 / 201 to 300 | 101 to 200 / 301 to 500 / 501 to 1000 | 301 to 500 |
| Max. Thrust Force(N) | 84 ～ 339 | 27 ～ 90 | 150 ～ 600 | 250 ～ 900 | 75 ～ 100 | 339 | 98 ～ 588 | 98 ～ 294 | 98 ～ 294 | 131 ～ 736 | 500 |
| Noise Filters | Not Provided / Provided | - | - | - | - | - | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided |
| Table Length L1(mm) | 154 | 70 | - | - | - | 90 | 102 ～ 170 | 160 ～ 172 | 160 ～ 172 | - | - |
| Usage Environment | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard |
| Positioning Repeatability(µm) | ±10 | ±20 | ±20 | ±20 | ±20 | ±10 | ±10 ～ ±20 | ±40 | ±40 | ±20 | - |
| Maximum Velocity(mm/sec) | 300 ～ 1200 | 300 ～ 1000 | 80 ～ 500 | 50 ～ 300 | 250 ～ 500 | 1800 | 1,000 ～ 940 | 2000 ～ 3000 | 2000 ～ 3000 | 1,000 ～ 900 | 50 |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Main Body, Peripheral Components
- Main Body
- Peripheral Components
-
Type
-
Sliders -
Rods
-
-
Stroke(mm)
- 1,000
- 1,100
- 1,200
- 1,500
- 1,800
- 2,000
- 10
- 15
- 20
- 25
- 30
- 40
- 50
- 60
- 70
- 75
- 80
- 100
- 120
- 125
- 150
- 200
- 250
- 300
- 350
- 400
- 450
- 500
- 550
- 600
- 650
- 700
- 750
- 800
- 850
- 900
- 950
- 1000
- 1050
- 1100
- 1150
- 1200
- 1250
- 1300
- 1350
- 1400
- 1450
- 1500
- 1550
- 1600
- 1650
- 1700
- 1750
- 1800
- 1850
- 1900
- 1950
- 2000
- 2050
- 2100
- 2150
- 2200
- 2250
- 2300
- 2350
- 2400
- 2450
- 2500
- 2550
- 2600
- 2650
- 2700
- 2750
- 2800
- 2850
- 2900
- 2950
- 3000
- 3050
-
Max. Transportable Mass Range (Horizontal)(kg)
- 0 to 2.0
- 2.1 to 5.0
- 5.1 to 10.0
- 10.1 to 20.0
- 20.1 to 50.0
- 50.1 to 100.0
- 150.1 or Higher
The calculation method differs depending on the manufacturer. For details, see the technical data provided by the relevant manufacturer.
-
Max. Transportable Mass (Horizontal)(kg)
- 0.75
- 1
- 1.5
- 2
- 2.4
- 2.5
- 3
- 4
- 4.4
- 5
- 6
- 7
- 7.3
- 7.5
- 8
- 8.2
- 9
- 10
- 11
- 11.9
- 12
- 14
- 15
- 17
- 18
- 19
- 20
- 23
- 25
- 30
- 35
- 40
- 45
- 50
- 55
- 60
- 65
- 70
- 80
- 85
- 90
- 200
The calculation method differs depending on the manufacturer. For details, see the technical data provided by the relevant manufacturer.
-
Max. Transportable Mass Range (Vertical)(kg)
- 0 to 2.0
- 2.1 to 5.0
- 5.1 to 10.0
- 10.1 to 20.0
- 20.1 to 50.0
- 50.1 to 100.0
- 100.1 or Higher
The calculation method differs depending on the manufacturer. For details, see the technical data provided by the relevant manufacturer.
-
Max. Transportable Mass (Vertical)(kg)
- 0.05
- 0.1
- 0.25
- 0.5
- 1
- 1.5
- 2
- 2.5
- 3
- 3.5
- 4
- 4.5
- 5
- 6
- 7
- 7.5
- 8
- 8.5
- 9
- 10
- 11
- 12
- 12.5
- 13
- 14
- 15
- 16
- 17
- 18.5
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 27
- 28.5
- 29
- 30
- 35
- 37
- 38
- 41
- 42
- 43
- 44
- 46
- 50
- 51
- 53
- 72
- 115
- Not vertical
The calculation method differs depending on the manufacturer. For details, see the technical data provided by the relevant manufacturer.
-
Drive Method
-
Guide
-
Lead(mm)
-
Input Power Supply
-
Position Detection
-
I/O Module
- NPN
- PNP
- CC-Link
- DeviceNet
- Ethernet
- Not Provided
- EtherCAT
- IO-Link
- PROFINET
-
Table Width W1(mm)
-
Brake
-
Max. Thrust Force Range(N)
-
Max. Thrust Force(N)
-
Noise Filters
-
Table Length L1(mm)
-
Usage Environment
-
Positioning Repeatability(µm)
-
Maximum Velocity(mm/sec)
CAD data type
-
- 2D
- 3D
Examples how you can use these components
Categories related to Single Axis Robots
Fizetési mód
Átutalás
Előre fizetés
Igény szerinti gyártás
Tanúsítványok
Copyright © MISUMI Corporation Minden jog fenntartva.