SKF Bearing Covers, Seals

?* Information on days to ship and prices

• 

  Labyrinth Ring

  SKF

  [Specifications]
  ・Material: metal/VMQ
  
  [Features]
  ・Good protection from contamination
  ・Keep the lubricant in the housing
  ・Part of the three barrier solution
  ・Cost-effective

  Starting from∗ ：	87.17 €
  Min. Shipping Days ：	17 Days

  *Unit price with basic configuration

• 

  Labyrinth Seal / Steel, Silicone / TS Series

  SKF

  [Specifications]
  ・Material: steel/silicone
  
  Housing seals are the first barrier against contamination.
  
  [Features]
  ・Good protection from contamination
  ・Keep the lubricant in the housing
  ・Part of the three barrier solution
  ・Cost-effective

  Starting from∗ ：	161.38 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  SKF Felt Seal for Pedestal Bearing Housing

  SKF

  [Specifications]
  ・Shaft tolerance class: h9
  
  [Features]
  ・Felt seals provide a simple and effective sealing solution
  ・They accommodate relatively high shaft speeds, because a small gap forms between the felt and shaft, transforming the seal into a non-contact, gap-type seal
  ・Felt seals do not limit axial movements of the shaft
  ・Easy to install
  ・Cost-effective
  ・Suitable for relatively high shaft speeds

  Starting from∗ ：	15.34 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  SKF Labyrinth Seal for Pedestal Bearing Housing

  SKF

  [Specifications]
  ・Engineering material: Steel, silicon
  ・eClass code: 23-05-17-90
  
  SNL housing seals are the first barrier against contamination. For applications where there are high speeds or extreme temperatures, SKF recommends using labyrinth seals, and for highly contaminated environments, SKF recommends the three-barrier solution. This cost-effective sealing solution can have a significant impact on bearing service life as contaminants have to pass through three barriers to reach the bearing.
  
  [Features]
  ・Good protection from contamination
  ・Keep the lubricant in the housing
  ・Part of the three barrier solution
  ・Cost-effective

  Starting from∗ ：	82.74 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  SKF Felt Strips

  SKF

  [Specifications]
  ・Shaft tolerance class: h9
  
  Felt strips, and their high-temperature variants made of aluminium borosilicate, provide a simple and effective sealing solution.
  
  [Features]
  ・They accommodate relatively high shaft speeds, because a small gap forms between the felt strip and the shaft, transforming the seal into a non-contact, gap-type seal
  ・Felt strips should be cut to the correct length and soaked in hot oil prior to being installed
  ・Cost-effective
  ・Suitable for relatively high shaft speeds

  Starting from∗ ：	0.35 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Shaft Seal, CRW1 R, NBR

  SKF

  [Specifications]
  ・Internal diameter(mm): 12.7~115
  ・Outer diameter(mm): 25.37~150
  ・Material: NBR

  Starting from∗ ：	3.68 €
  Min. Shipping Days ：	17 Days

  *Unit price with basic configuration

• 

  Housing Seal

  SKF

  [Specifications]
  ・Material: HNBR, elastomer/ thermoplastic, metal/VMQ
  
  [Features]
  ・These seals provide low friction, effective sealing against many contaminants, and accommodate axial displacement of the shaft
  ・In highly contaminated environments, they can serve as the first barrier in a three-barrier sealing solution
  ・The combination of housing seals, the grease fill in the housing, and a bearing with integral seals can have a significant impact on bearing service life

  Starting from∗ ：	18.67 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Shaft Seal, HMSA10, FKM

  SKF

  [Specifications]
  ・Internal diameter(mm): 35
  ・Outer diameter(mm): 55
  ・Width(mm): 8
  ・Material: FKM
  
  Shaft seals for general industrial applications with auxiliary lip, fluoro rubber.

  • Volume Discount

  Starting from∗ ：	6.20 €
  Min. Shipping Days ：	Quote

  *Unit price with basic configuration

• 

  Taconite-seal

  SKF

  [Specifications]
  ・Internal diameter(mm): 100
  ・Outer diameter(mm): 120
  ・Material: FKM
  ・eClass code: 23-07-08-01
  
  Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. HMS5 seals are designed with a rubber outside diameter. They have a conventional sealing lip made of elastomer with a garter spring to maintain the right radial load.
  
  [Features]
  ・High pumping rate
  ・With garter spring
  ・Accommodate misalignment

  Starting from∗ ：	259.28 €
  Min. Shipping Days ：	17 Days

  *Unit price with basic configuration

• 

  Sealing washer / Internal diameter 50mm

  SKF

  [Specifications]
  ・Internal diameter(mm): 50
  ・Outer diameter(mm): 110
  ・eClass code: 23-05-17-90
  
  SKF sealing washers of the Z-type form efficient labyrinth seals that can be used in a wide variety of applications. Being primarily recommended for simple bearing arrangements, they provide inexpensive solutions to many sealing problems. The sealing efficiency depends on the washer design (standard or F design) and the number of washers used.
  
  [Features]
  ・Cost-effective
  ・Support sealing solutions

  Starting from∗ ：	15.95 €
  Min. Shipping Days ：	17 Days

  *Unit price with basic configuration

• 

  Spacing Washer ZW-type / Width 2mm

  SKF

  [Specifications]
  ・Inner Diameter(mm): 12-80
  ・Outer Diameter(mm): 17-90
  ・Width(mm): 2
  
  [Features]
  ・Cost-effective
  ・Enable relubrication of bearings with Z-type sealing washers

  Starting from∗ ：	1.47 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Sealing Ring, Single Lipped

  SKF

  [Specifications]
  ・Internal diameter(mm): 8-70
  ・Outer diameter(mm): 12-78
  ・Width(mm): 3, 4, 5
  ・Material: NBR
  
  Radial shaft seal with low cross-sectional height for needle roller bearings, G design.
  
  [Features]
  ・Low cross-sectional height
  ・Retain the lubricant
  ・Exclude contaminants

  Starting from∗ ：	3.39 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Shaft Seal, CRW1, NBR

  SKF

  [Specifications]
  ・Internal diameter(mm): 17.48, 25.4, 47.63
  ・Outer diameter(mm): 28.55, 36.5, 63.55
  ・eClass code: 23-07-08-01
  
  Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
  
  [Features]
  ・For oil or grease
  ・With garter spring
  ・WAVE lip creates higher pumping rate
  ・WAVE lip has less friction between shaft and lip
  ・WAVE lip has a lower temperature at the contact point

  Starting from∗ ：	3.78 €
  Min. Shipping Days ：	17 Days

  *Unit price with basic configuration

• 

  V-ring-sealing Set

  SKF

  [Specifications]
  ・Material: Steel plate/NBR
  ・eClass code: 23-05-17-90
  
  V-ring seals consist of a V-ring and a sheet steel sealing washer with a vulcanized rubber lip. The rubber lip fits into the seal groove in the housing. The washer is protected against corrosion. The seals are used to protect bearings from contamination or as secondary seals to protect primary seals in highly contaminated environments. They are a cost-effective and easy to install contaminant barrier for all kind of shafts. They are available in nitrile rubber.
  
  [Features]
  ・Easy to install
  ・Many variants
  ・Cost-effective

  Starting from∗ ：	21.78 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Housing seals F Series / Internal diameter 50mm

  SKF

  [Specifications]
  ・Internal diameter(mm): 50
  ・Outer diameter(mm): 110
  ・eClass code: 23-05-17-90
  
  SKF sealing washers of the Z-type form efficient labyrinth seals that can be used in a wide variety of applications. Being primarily recommended for simple bearing arrangements, they provide inexpensive solutions to many sealing problems. The sealing efficiency depends on the washer design (standard or F design) and the number of washers used.

  Starting from∗ ：	33.47 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Housing seals / Internal diameter 10~380mm

  SKF

  [Specifications]
  ・Internal diameter(mm): 10~380
  ・Outer diameter(mm): 26~415
  ・Version(g): Labyrinth seal, Sealing lamellas
  ・eClass code: 23-05-17-90

  Starting from∗ ：	1.78 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Bearing Covers, Seals A Series / Internal diameter 31~100mm

  SKF

  [Specifications]
  ・Internal diameter(mm): 31~100
  ・Outer diameter(mm): 39~160.5
  ・Version(g): V-Ring seal
  ・eClass code: 23-05-17-90
  
  V-ring seals consist of a V-ring and a sheet steel sealing washer with a vulcanized rubber lip. The rubber lip fits into the seal groove in the housing. The washer is protected against corrosion. The seals are used to protect bearings from contamination or as secondary seals to protect primary seals in highly contaminated environments. They are a cost-effective and easy to install contaminant barrier for all kind of shafts. They are available in nitrile rubber.
  
  [Features]
  ・Easy to install
  ・Many variants
  ・Cost-effective

  Starting from∗ ：	24.07 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Distance washers / Internal diameter 35, 45mm

  SKF

  [Specifications]
  ・Internal diameter(mm): 35, 45
  ・Outer diameter(mm): 42, 55
  ・eClass code: 23-05-17-90
  
  SKF spacing washers of the ZW-type enable open bearings with Z-type sealing washers on both sides to be relubricated. Using a set of spacing washers enables a free passage for fresh grease. The set consists of two washers – one to be mounted in the housing bore and one to be mounted on the shaft. These housing and shaft washers are ordered separately.
  
  [Features]
  ・Cost-effective
  ・Enable relubrication of bearings with Z-type sealing washers

  Starting from∗ ：	1.87 €
  Min. Shipping Days ：	17 Days

  *Unit price with basic configuration

• 

  Housing seals / Double lip seal

  SKF

  These seals provide low friction, effective sealing against many contaminants, and accommodate axial displacement of the shaft. In highly contaminated environments, they can serve as the first barrier in a three-barrier sealing solution. The combination of housing seals, the grease fill in the housing, and a bearing with integral seals can have a significant impact on bearing service life.
  
  [Features]
  ・Good protection from contamination
  ・Keep the lubricant in the housing
  ・Part of the three barrier solution
  ・Low friction
  ・eClass code: 23-05-17-90

  Starting from∗ ：	20.83 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  SKF Four-Lip Seal for Pedestal Bearing Housing

  SKF

  [Specifications]
  ・Engineering material: thermoplastic elastomer
  ・eClass code: 23-05-17-90
  
  SKF housing seals are the first barrier against contamination. The four-lip seals replace the former double-lip seals. The four-lip seals are more effective than the double-lip and generate less friction, which enables higher shaft speeds. For highly contaminated environments, SKF recommends the three-barrier solution. This cost-effective sealing solution can have a significant impact on bearing service life as contaminants have to pass through three barriers to reach the bearing.
  
  [Features]
  ・Good protection from contamination
  ・Keep the lubricant in the housing
  ・Part of three barrier solution

  Starting from∗ ：	11.91 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  SKF End Cover for Pillow Block Unit

  SKF

  [Specifications]
  ・Engineering material: Nitrile rubber/Steel
  ・eClass code: 23-05-17-90
  
  End covers can be used at the end of shafts instead of seals. These end covers are made of polypropylene and designed for SNL bearing housings in sizes 05 to 32. They have good resistance to most chemicals and can withstand operating temperatures up to 110 °C (230 °F). End covers are easy to install and cost-effective accessories.
  
  [Features]
  ・Good chemical resistance
  ・Designed for temperatures up to 110 °C (230 °F)
  ・Easy to install
  ・Cost-effective

  Starting from∗ ：	5.23 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Felt-Sealing Set

  SKF

  [Specifications]
  ・Material: aluminium/felt
  ・eClass code: 23-05-17-90
  
  Felt seals provide a simple and effective sealing solution. They accommodate relatively high shaft speeds, because a small gap forms between the felt and shaft, transforming the seal into a non-contact, gap-type seal. Felt seals do not limit axial movements of the shaft.
  
  [Features]
  ・Easy to install
  ・Cost-effective
  ・Suitable for relatively high shaft speeds

  Starting from∗ ：	25.50 €
  Min. Shipping Days ：	17 Days

  *Unit price with basic configuration

• 

  Sealing Strip

  SKF

  [Specifications]
  ・Width(mm):6, 8
  ・Length(mm): 190, 260
  ・eClass code: 23-05-17-90
  
  Felt strips, and their high-temperature variants made of aluminium borosilicate, provide a simple and effective sealing solution. They accommodate relatively high shaft speeds, because a small gap forms between the felt strip and the shaft, transforming the seal into a non-contact, gap-type seal. Felt strips should be cut to the correct length and soaked in hot oil prior to being installed.
  
  [Features]
  ・Cost-effective
  ・Suitable for relatively high shaft speeds

  Starting from∗ ：	16.22 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Shaft Seal, CRWA1, NBR

  SKF

  [Specifications]
  ・Internal diameter(mm): 31.8
  ・Outer diameter(mm): 44.5
  ・Material: NBR

  Starting from∗ ：	4.82 €
  Min. Shipping Days ：	17 Days

  *Unit price with basic configuration

• 

  Shaft Seal, HM14 R, NBR

  SKF

  [Specifications]
  ・Internal diameter(mm): 28.58, 57.15
  ・Outer diameter(mm): 34.93, 66.68
  ・Material: NBR

  Starting from∗ ：	3.08 €
  Min. Shipping Days ：	17 Days

  *Unit price with basic configuration

• 

  End cover, for SNL bearing housings / Outer diameter 276mm

  SKF

  [Specifications]
  ・Outer Diameter(mm): 276
  ・Width(mm): 21
  ・eClass code: 23-05-17-90
  
  End covers can be used at the end of shafts instead of seals. End covers in the ETS series are designed for SNL bearing housings in sizes 34 to 96. They have good resistance to most chemicals, are robust, and can withstand high operating temperatures. End covers are easy to install and cost-effective accessories.
  
  [Features]
  ・Robust design
  ・Good chemical resistance
  ・Designed for high operating temperatures
  ・Easy to install
  ・Cost-effective

  Starting from∗ ：	274.77 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Spacing washer / Internal diameter 90mm

  SKF

  [Specifications]
  ・Internal diameter(mm): 90
  ・Outer diameter(mm): 276
  ・eClass code: 23-05-17-90
  
  SKF spacing washers of the ZW-type enable open bearings with Z-type sealing washers on both sides to be relubricated. Using a set of spacing washers enables a free passage for fresh grease. The set consists of two washers – one to be mounted in the housing bore and one to be mounted on the shaft. These housing and shaft washers are ordered separately.
  
  [Features]
  ・Cost-effective
  ・Enable relubrication of bearings with Z-type sealing washers

  Starting from∗ ：	5.48 €
  Min. Shipping Days ：	17 Days

  *Unit price with basic configuration

• 

  Housing seals A Series / Internal diameter 90mm

  SKF

  [Specifications]
  ・Internal diameter(mm): 50
  ・Outer diameter(mm): 170.5
  ・eClass code: 23-05-17-90
  
  V-ring seals consist of a V-ring and a sheet steel sealing washer with a vulcanized rubber lip. The rubber lip fits into the seal groove in the housing. The washer is protected against corrosion. The seals are used to protect bearings from contamination or as secondary seals to protect primary seals in highly contaminated environments. They are a cost-effective and easy to install contaminant barrier for all kind of shafts. They are available in nitrile rubber. When ordering, please note that one item (seal pack) contains two seals.
  
  [Features]
  ・Easy to install
  ・Many variants
  ・Cost-effective

  Starting from∗ ：	73.17 €
  Min. Shipping Days ：	17 Days

  *Unit price with basic configuration

• 

  Housing seals C Series / Internal diameter 85mm

  SKF

  [Specifications]
  ・Internal diameter(mm): 85
  ・Outer diameter(mm): 153.5
  ・eClass code: 23-05-17-90
  
  Felt seals provide a simple and effective sealing solution. They accommodate relatively high shaft speeds, because a small gap forms between the felt and shaft, transforming the seal into a non-contact, gap-type seal. Felt seals do not limit axial movements of the shaft. When ordering, please note that one item (seal pack) contains two seals (four halves).
  
  [Features]
  ・Easy to install
  ・Cost-effective
  ・Suitable for relatively high shaft speeds

  Starting from∗ ：	86.82 €
  Min. Shipping Days ：	17 Days

  *Unit price with basic configuration

• 

  Housing seals CE Series

  SKF

  [Specifications]
  ・Internal diameter(mm): 55.56
  ・Outer diameter(mm): 83
  ・eClass code: 23-05-17-90
  
  Felt seals provide a simple and effective sealing solution. They accommodate relatively high shaft speeds, because a small gap forms between the felt and shaft, transforming the seal into a non-contact, gap-type seal. Felt seals do not limit axial movements of the shaft.
  
  [Features]
  ・Easy to install
  ・Cost-effective
  ・Suitable for relatively high shaft speeds

  Starting from∗ ：	46.55 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Housing seals L Series / Internal diameter 40mm

  SKF

  [Specifications]
  ・Internal diameter(mm): 50
  ・Outer diameter(mm): 110
  ・eClass code: 23-05-17-90
  
  SKF housing seals are the first barrier against contamination. The four-lip seals replace the former double-lip seals. The four-lip seals are more effective than the double-lip and generate less friction, which enables higher shaft speeds. For highly contaminated environments, SKF recommends the three-barrier solution. This cost-effective sealing solution can have a significant impact on bearing service life as contaminants have to pass through three barriers to reach the bearing.
  
  [Features]
  ・Good protection from contamination
  ・Keep the lubricant in the housing
  ・Part of three barrier solution

  Starting from∗ ：	19.57 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Housing seals S Series / Internal diameter 90mm

  SKF

  [Specifications]
  ・Internal diameter(mm): 90
  ・Outer diameter(mm): 165
  ・eClass code: 23-05-17-90
  
  SNL housing seals are the first barrier against contamination. For applications where there are high speeds or extreme temperatures, SKF recommends using labyrinth seals, and for highly contaminated environments, SKF recommends the three-barrier solution. This cost-effective sealing solution can have a significant impact on bearing service life as contaminants have to pass through three barriers to reach the bearing.
  
  [Features]
  ・Good protection from contamination
  ・Keep the lubricant in the housing
  ・Part of the three barrier solution

  Starting from∗ ：	443.22 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Covers, Caps / Outer diameter(40~256mm)

  SKF

  [Specifications]
  ・Outer Diameter(mm): 40~256
  ・Width(mm): 5.5~45
  ・Version(g): End cover, Housing cover
  ・eClass code: 23-05-17-90

  Starting from∗ ：	3.65 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Housing seals A Series / Internal diameter 20~175mm

  SKF

  [Specifications]
  ・Internal diameter(mm): 20~175
  ・Outer diameter(mm): 41.5~215.5
  ・Version(g): V-Ring seal
  ・eClass code: 23-05-17-90
  
  V-ring seals consist of a V-ring and a sheet steel sealing washer with a vulcanized rubber lip. The rubber lip fits into the seal groove in the housing. The washer is protected against corrosion. The seals are used to protect bearings from contamination or as secondary seals to protect primary seals in highly contaminated environments. They are a cost-effective and easy to install contaminant barrier for all kind of shafts.
  
  [Features]
  ・Easy to install
  ・Many variants
  ・Cost-effective

  Starting from∗ ：	18.20 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Housing seals C Series / Internal diameter 20~140mm

  SKF

  [Specifications]
  ・Internal diameter(mm): 20~140
  ・Outer diameter(mm): 37~208.5
  ・Version(g): Felt seal
  ・eClass code: 23-05-17-90
  
  Felt seals provide a simple and effective sealing solution. They accommodate relatively high shaft speeds, because a small gap forms between the felt and shaft, transforming the seal into a non-contact, gap-type seal. Felt seals do not limit axial movements of the shaft.
  
  [Features]
  ・Easy to install
  ・Cost-effective
  ・Suitable for relatively high shaft speeds

  Starting from∗ ：	17.22 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Housing seals F Series / Internal diameter 20~50mm

  SKF

  [Specifications]
  ・Internal diameter(mm): 20~50
  ・Outer diameter(mm): 42~90
  ・Version(g): Sealing lamellas with felt insert
  ・eClass code: 23-05-17-90
  
  SKF sealing washers of the Z-type form efficient labyrinth seals that can be used in a wide variety of applications. Being primarily recommended for simple bearing arrangements, they provide inexpensive solutions to many sealing problems. The sealing efficiency depends on the washer design (standard or F design) and the number of washers used.
  
  [Features]
  ・Cost-effective
  ・Support sealing solutions

  Starting from∗ ：	5.22 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Housing seals L Series / Internal diameter 35~155mm

  SKF

  [Specifications]
  ・Internal diameter(mm): 35~155
  ・Outer diameter(mm): 69.6~187.4
  ・Version(g): Four-lip seal
  ・eClass code: 23-05-17-90
  
  SKF housing seals are the first barrier against contamination. The four-lip seals replace the former double-lip seals. The four-lip seals are more effective than the double-lip and generate less friction, which enables higher shaft speeds. For highly contaminated environments, SKF recommends the three-barrier solution. This cost-effective sealing solution can have a significant impact on bearing service life as contaminants have to pass through three barriers to reach the bearing.
  
  [Features]
  ・Good protection from contamination
  ・Keep the lubricant in the housing
  ・Part of three barrier solution

  Starting from∗ ：	13.78 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Housing seals S Series / Internal diameter 25~165mm

  SKF

  [Specifications]
  ・Internal diameter(mm): 25~165
  ・Outer diameter(mm): 42.5~210
  ・Version(g): Labyrinth seal
  ・eClass code: 23-05-17-90
  
  SNL housing seals are the first barrier against contamination. For applications where there are high speeds or extreme temperatures, SKF recommends using labyrinth seals, and for highly contaminated environments, SKF recommends the three-barrier solution. This cost-effective sealing solution can have a significant impact on bearing service life as contaminants have to pass through three barriers to reach the bearing.
  
  [Features]
  ・Good protection from contamination
  ・Keep the lubricant in the housing
  ・Part of the three barrier solution
  ・Cost-effective

  Starting from∗ ：	87.17 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Housing seals S Series / Internal diameter 150, 180mm

  SKF

  [Specifications]
  ・Internal diameter(mm): 150, 180
  ・Outer diameter(mm): 55~236
  ・Version(g): Double lip seal, End cover, Housing cover, Labyrinth seal
  ・eClass code: 23-05-17-90

  Starting from∗ ：	3.12 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Bearing Covers, Seals C Series

  SKF

  [Specifications]
  ・Internal diameter(mm): 20~135
  ・Outer diameter(mm): 42~198.5
  ・eClass code: 23-05-17-90
  
  Felt seals provide a simple and effective sealing solution. They accommodate relatively high shaft speeds, because a small gap forms between the felt and shaft, transforming the seal into a non-contact, gap-type seal. Felt seals do not limit axial movements of the shaft.
  
  [Features]
  ・Easy to install
  ・Cost-effective
  ・Suitable for relatively high shaft speeds

  Starting from∗ ：	32.25 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Bearing Covers, Seals L Series / Internal diameter 30~142.7mm

  SKF

  [Specifications]
  ・Internal diameter(mm): 30~142.7
  ・Outer diameter(mm): 58.1~210.1
  ・Version(g): Four-lip seal
  ・eClass code: 23-05-17-90
  
  SKF housing seals are the first barrier against contamination. The four-lip seals replace the former double-lip seals. The four-lip seals are more effective than the double-lip and generate less friction, which enables higher shaft speeds. For highly contaminated environments, SKF recommends the three-barrier solution. This cost-effective sealing solution can have a significant impact on bearing service life as contaminants have to pass through three barriers to reach the bearing.
  
  [Features]
  ・Good protection from contamination
  ・Keep the lubricant in the housing
  ・Part of three barrier solution

  Starting from∗ ：	13.37 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Bearing Covers, Seals LA Series / Internal diameter 61.91mm

  SKF

  [Specifications]
  ・Internal diameter(mm): 61.91
  ・Outer diameter(mm): 94.7
  ・Version(g): Four-lip seal
  ・eClass code: 23-05-17-90
  
  SKF housing seals are the first barrier against contamination. The four-lip seals replace the former double-lip seals. The four-lip seals are more effective than the double-lip and generate less friction, which enables higher shaft speeds. For highly contaminated environments, SKF recommends the three-barrier solution. This cost-effective sealing solution can have a significant impact on bearing service life as contaminants have to pass through three barriers to reach the bearing.
  
  [Features]
  ・Good protection from contamination
  ・Keep the lubricant in the housing
  ・Part of three barrier solution

  Starting from∗ ：	23.33 €
  Min. Shipping Days ：	17 Days

  *Unit price with basic configuration

• 

  Bearing Covers, Seals S Series / Internal diameter 55, 100, 115mm

  SKF

  [Specifications]
  ・Internal diameter(mm): 55, 100, 115
  ・Outer diameter(mm): 78.5, 126, 145
  ・Version(g): Labyrinth seal
  ・eClass code: 23-05-17-90
  
  SNL housing seals are the first barrier against contamination. For applications where there are high speeds or extreme temperatures, SKF recommends using labyrinth seals, and for highly contaminated environments, SKF recommends the three-barrier solution. This cost-effective sealing solution can have a significant impact on bearing service life as contaminants have to pass through three barriers to reach the bearing.
  
  [Features]
  ・Good protection from contamination
  ・Keep the lubricant in the housing
  ・Part of the three barrier solution
  ・Cost-effective

  Starting from∗ ：	111.28 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Covers, Caps / Outer diameter 94,158.6mm

  SKF

  [Specifications]
  ・Outer Diameter(mm): 94,158.6
  ・Version(g): End cover, Housing cover
  ・eClass code: 23-05-17-90
  
  [Features]
  ・Easy to install
  ・Good chemical resistance
  ・Cost effective

  Starting from∗ ：	4.53 €
  Min. Shipping Days ：	17 Days

  *Unit price with basic configuration

• 

  Housing seals A Series / / Internal diameter 75, 125mm

  SKF

  [Specifications]
  ・Internal diameter(mm): 75, 125
  ・Outer diameter(mm): 103, 190.5
  ・eClass code: 23-05-17-90
  
  V-ring seals consist of a V-ring and a sheet steel sealing washer with a vulcanized rubber lip. The rubber lip fits into the seal groove in the housing. The washer is protected against corrosion. The seals are used to protect bearings from contamination or as secondary seals to protect primary seals in highly contaminated environments. They are a cost-effective and easy to install contaminant barrier for all kind of shafts. They are available in nitrile rubber.
  
  [Features]
  ・Easy to install
  ・Many variants
  ・Cost-effective

  Starting from∗ ：	48.42 €
  Min. Shipping Days ：	17 Days

  *Unit price with basic configuration

Loading...