MISUMI Carbide Square End Mills（work material：High Hardness Steel: to HRC55）
Search by sub-category
Square End Mills (Carbide)
Multi-Function Square End Mills (Carbide)
High Helical End Mills (Carbide)
Roughing End Mills (Carbide)
Long Neck Square End Mills (Carbide)
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Starting from∗ ： 44.57 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XAC series carbide roughing end mill, fine pitch / regular model
MISUMI
Strongly supports the cost reduction of roughing with the limited special price for standard sizes- Volume Discount
- TiAlN
- General Steel
- R (Regular)
Starting from∗ ： 63.49 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XAC series carbide high-helical end mill for high-hardness steel machining, multi-blade, 45° torsion / long model
MISUMI
The expensive long flute type for high hardness is offered at an affordable price- Volume Discount
- TiAlN
- High-Hardness Steel
- Multi-Flutes （5 ~）
Starting from∗ ： 45.94 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long shank, short model
MISUMI
[Features]
-Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-Due to the unique shape of the chip groove, groove cutting can be performed with a depth of cut comparable to that of a 2-groove.
-The application of a rounded blade at the rear end of the groove suppresses machining streaks that occur during multi-step machining of the side face. (Product in Fig. 3 only)
-The 45° helix angle makes it ideal for high-speed machining compared to the general 30° helix angle
It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- S (Short)
Starting from∗ ： 61.53 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide radius end mill for countersink, 3-flute / short model
MISUMI
[Features]
-Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-By leaving the round land width (the width of the cylindrical part without clearance angle at the circumferential groove), it is possible to achieve an effect similar to that of a reamer and improve the surface roughness of the machined surface
-The end cutting edge is almost flat, making it ideal for finishing counterbores.
-The 3-flute shape suppresses chatter that can occur during drilling and counterboring
-Optimal for machining in the low to medium speed range due to the universal 30° helix angle
-The coating has high oxidation resistance and high hardness, achieving long life. Effective in high-speed machining and dry machining as coating characteristics.- Volume Discount
- TS
- General Steel
- 3 Flutes
- S (Short)
Starting from∗ ： 53.95 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide high-helical end mill, multi-flute, 53° spiral / regular model
MISUMI
[Features]
-When machining raw material, heat-treated steel, aluminium, etc., when finishing standing walls of the mould bottom (main mould), etc., they show their strength thanks to the positive rake angle, the sharp corners of the bottom edge and the strong bevel angle of 53°
-High tool rigidity minimises tool tilt during side milling.- Volume Discount
- TS
- General Steel
- Multi-Flutes （5 ~）
- R (Regular)
Min. Shipping Days ： 5 Days -
TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / stub model
MISUMI
[Features]
-Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-Adopting the 3-blade shape, it is resistant to chattering and can operate from plunging to grooving without steps
-The unique shape of the chip groove enables grooving with a depth of cut equivalent to that of a 2-blade tool
-Adopting the stub-blade length, which is 1. 5 times longer than the cutting edge diameter, it is possible to machine the bottom surface while suppressing chatter
-Compared with square cutters with 30° spiral angle, both rotation and feed are more than twice as fast
-The 45° spiral angle makes it ideal for high-speed machining compared with the general 30° spiral angle
It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.- Volume Discount
- TS
- General Steel
- 3 Flutes
- B (Stub)
Min. Shipping Days ： 5 Days -
TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / short model
MISUMI
[Features]
-Demonstrates high performance when machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-Adopting the 3-flank shape makes it resistant to chatter, The unique shape of the chip groove enables flute cutting with a depth of cut equivalent to that of a 2-flute tool
-The 45° helix angle makes it ideal for high-speed machining compared to a 30° helix angle for general purpose
-It has a coating with high oxidation resistance and high hardness and achieves long life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 3 Flutes
- S (Short)
Min. Shipping Days ： 5 Days -
TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / SR Flute Length
MISUMI
[Features]
-Demonstrates high performance when machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-Adopting the 3-flank shape, it is resistant to chatter,
-The unique shape of the chip groove enables flute cutting with a depth of cut equivalent to that of a 2-flute tool
-This product has an average cutting edge length between TSC-HEM3S (short cutting edge length) and TSC-HEM3R (normal cutting edge length), hence it is called "SR Cutting Edge Length. "
-Compared to square cutters with 30° helix angle, both rotation and feed are more than twice as fast
-The 45° helix angle makes it ideal for high-speed machining compared to general-purpose cutters with 30° helix angle
It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.- Volume Discount
- TS
- General Steel
- 3 Flutes
- SR
Min. Shipping Days ： 5 Days -
TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / regular model
MISUMI
[Features]
-Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-Adopting the 3-flute shape, it is resistant to chatter and can operate from plunging to grooving without steps
-The unique shape of the chip groove enables grooving with a depth of cut equivalent to that of a 2-flute tool
-Comparable to 30° helix angle square shoulder cutters, both rotation and feed are more than twice as fast
-The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle cutters
-The coating has high oxidation resistance and hardness and achieves long life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 3 Flutes
- R (Regular)
Min. Shipping Days ： 5 Days -
TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long model
MISUMI
[Features]
-Demonstrates high performance when machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-The unique shape of the chipbreaker enables grooves to be cut with a depth of cut equivalent to that of a 2-flute tool
-Compared to square shoulder cutters with 30° helix angle, both rotation and feed are more than twice as fast
-The 45° helix angle makes it ideal for high speed machining compared to a general purpose square end mill with 30° helix angle
-it has a coating with high oxidation resistance and high hardness and achieves long life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 3 Flutes
- L (Long)
Min. Shipping Days ： 5 Days -
TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long shank, short model
MISUMI
[Features]
-High performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-The unique shape of the chip groove enables cutting grooves with a depth of cut equivalent to that of a two flute tool
-The application of a rounded cutting edge at the rear end of the flute suppresses machining streaks that occur when machining the side face in multiple steps (product shown in Fig. 3 only).
-The helix angle of 45° makes it ideal for high-speed machining, compared with the general helix angle of 30°
-It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 3 Flutes
- S (Short)
Starting from∗ ： 77.95 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / stub model
MISUMI
[Features]
-Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-The unique shape of the chip groove enables grooves to be cut with a depth of cut equivalent to that of a 2-blade tool
-By adopting a stitch groove length 1. 5 times longer than the cutting edge diameter, it is possible to machine the bottom surface while suppressing chatter
-Compared to square end mills with 30° helix angle, both rotation and feed are more than twice as fast
-The 45° helix angle makes it ideal for high-speed machining compared to a general-purpose cutter with 30° helix angle
-it has a coating with high oxidation resistance and high hardness, and achieves long life. Effective in high-speed machining and dry machining as coating characteristics
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- B (Stub)
Min. Shipping Days ： 5 Days -
TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / short model
MISUMI
[Features]
-Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat treated steel (up to 50 HRC)
-The unique shape of the chipbreaker enables flute cutting with a depth of cut equivalent to that of a 2-flute tool
-Compared to square shoulder cutters with 30° helix angle, both rotation and feed are more than twice as fast
-The 45° helix angle makes it ideal for high speed machining compared to a general purpose square end mill with 30° helix angle
-it has a coating with high oxidation resistance and high hardness and achieves long life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- S (Short)
Min. Shipping Days ： 5 Days -
TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / SR Flute Length model
MISUMI
[Features]
-The high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-The unique shape of the chip groove enables cutting grooves with a depth of cut equivalent to that of a two flute tool
-This product has an average flute length between TSC-HEM4S (short flute length) and TSC-HEM4R (normal flute length), hence it is called "SR flute length". "
-Compared to square end mills with 30° helix angle, both rotation and feed are more than twice as fast
-The 45° helix angle makes it ideal for high-speed machining compared to general-purpose end mills with 30° helix angle
It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- SR
Min. Shipping Days ： 5 Days -
TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / regular model
MISUMI
[Features]
-Demonstrates high performance when machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-The unique shape of the chipbreaker enables grooves to be cut with a depth of cut equivalent to that of a 2-flute tool
-Compared to square shoulder cutters with 30° helix angle, both rotation and feed are more than twice as fast
-The 45° helix angle makes it ideal for high speed machining compared to a general purpose square end mill with 30° helix angle
-it has a coating with high oxidation resistance and high hardness and achieves long life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application methods, range of services, prices, delivery times, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- R (Regular)
Min. Shipping Days ： 5 Days -
TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long model
MISUMI
[Features]
-The high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-The unique shape of the chip groove enables cutting of grooves with a depth of cut equivalent to that of a 2-flute tool
-Compared to square shoulder cutters with 30° helix angle, both rotation and feed are more than twice as fast
-The 45° helix angle makes it ideal for high-speed machining compared to a general-purpose 30° helix square cutter
-it has a coating with high oxidation resistance and high hardness, and achieves long life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- L (Long)
Min. Shipping Days ： 5 Days -
TSC series carbide square end mill, 4-flute / 4D Flute Length (long) model
MISUMI
[Features]
-The cutter shows high performance in machining general steel, EN 1.4301 Equiv. (sintered) and quenched and tempered steel (up to 50 HRC)
-All-purpose cutter with 4 cutting edges for a wide range of applications
-Optimal for machining in the low to medium speed range due to the general-purpose helix angle of 30°
-The coating shows high oxidation resistance and high hardness and achieves a long tool life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- L (Long)
Min. Shipping Days ： 5 Days -
TSC series carbide end mill for key grooves, 2-flute / short model
MISUMI
[Features]
-Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-2-flute end mill for machining keyways
-The shape of the end cutting edge is almost flat so that the workpiece can be machined flat.
-Short cutting edge length that is resistant to chattering (1. 5 times longer than the cutting edge diameter)
-Since the cutting edge has been machined into a sharp corner, corner edges can also be machined
-Optimal for low to medium speed machining due to the universal 30° helix angle
-The coating has high oxidation resistance and high hardness and achieves long life. Effective in high-speed machining and dry machining as coating characteristics.- Volume Discount
- TS
- General Steel
- 2 Flutes
- S (Short)
Starting from∗ ： 38.96 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide long neck square end mill, 3-flute, 45° spiral / long neck model
MISUMI
[Features]
-Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-Multifunctional square long-neck type with high feed capability and excellent durability
-The 45° helix angle makes it ideal for high-speed machining compared to general 30° helix angle
-It has coating with high oxidation resistance and high hardness and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.- Volume Discount
- TS
- General Steel
- 3 Flutes
Min. Shipping Days ： 5 Days -
TSC series carbide high-helical end mill (for shrink fit holder / cutting edge deflection accuracy of 5μm or Less). Multi-flute, 53° spiral / stub model
MISUMI
The high precision high helical end mill for shrink fit holder is ideal for side finishing- Volume Discount
- TS
- General Steel
- Multi-Flutes （5 ~）
- B (Stub)
Starting from∗ ： 98.32 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide high-helical end mill (cutting edge deflection accuracy of 5 μm or less)
MISUMI
[Features]
-Cutting edge runout accuracy within 5µm (compared to manufacturer's measurements), back taper within 5µm and shank diameter tolerance h5 standards are used, making it ideal for lateral surface machining that requires high precision using high quality tools with low quality variation
-Designed with a blade shape that emphasises sharpness with positive blade and cutting edge sharpness corner, suitable for machining raw material such as carbon steel.- Volume Discount
- TS
- General Steel
- Multi-Flutes （5 ~）
- R (Regular)
Starting from∗ ： 94.04 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide high-helical end mill, multi-flute, 53° spiral / short model
MISUMI
[Features]
When machining raw material, heat-treated steel, aluminium, etc., finishing standing walls for mould bottom (main mould), etc., they show their strength thanks to the positive rake angle, sharp corners of the bottom edge and strong bevel angle of 53°
-High tool rigidity minimises tool tilt during side milling.- Volume Discount
- TS
- General Steel
- Multi-Flutes （5 ~）
- S (Short)
Min. Shipping Days ： 5 Days -
TSC series carbide roughing end mill, fine pitch / short model
MISUMI
[Features]
-Roughing cutter for rough and medium to coarse machining with fine pitch
-The coating has high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- S (Short)
Min. Shipping Days ： 5 Days -
TSC series carbide roughing end mill, fine pitch / regular model
MISUMI
[Features]
Roughing cutter for rough and medium to coarse machining with fine pitch
-The coating has high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- R (Regular)
Min. Shipping Days ： 5 Days -
TSC series carbide roughing end mill, fine pitch / long model
MISUMI
[Features]
-Roughing cutter for rough and medium to coarse machining with fine pitch
-The coating has high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- L (Long)
Min. Shipping Days ： 5 Days -
TSC series carbide roughing end mill, fine pitch / long regular model
MISUMI
[Features]
-Roughing cutter for rough and medium to coarse machining with fine pitch
-Long shank, ideal for milling deep cavities
-The coating has high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- R (Regular)
Min. Shipping Days ： 5 Days -
TSC series carbide roughing end mill, 45° spiral / fine pitch / short model
MISUMI
[Features]
-High-speed rotary machining is possible with 45° helix angle
-Roughing cutter for rough and medium to coarse machining with fine pitch
-The coating has high oxidation resistance and high hardness and achieves long service life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- S (Short)
Min. Shipping Days ： 5 Days -
TSC series carbide roughing end mill, 45° spiral / fine pitch / regular model
MISUMI
[Features]
-High-speed rotary machining is possible with 45° helix angle
-Roughing cutter for rough and medium to coarse machining with fine pitch
-The coating has high oxidation resistance and high hardness and achieves long service life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- R (Regular)
Min. Shipping Days ： 5 Days -
TSC series carbide roughing end mill, 45° spiral / fine pitch / long model
MISUMI
[Features]
-High-speed rotary machining is possible by adopting 45° helix angle
-Roughing cutter for rough and medium to coarse machining with fine pitch
-The coating has high oxidation resistance and high hardness and achieves long service life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- L (Long)
Min. Shipping Days ： 5 Days -
TS coated carbide roughing end mill, 45°spiral, fine pitch / long shank, regular model
MISUMI
[Features]
-High-speed rotary machining is possible by using a 45° helix angle
-Roughing cutter for rough and medium to coarse machining with fine pitch
-Long shank, ideal for milling deep cavities
-The coating has high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating features.- Volume Discount
- TS
- General Steel
- R (Regular)
Min. Shipping Days ： 5 Days -
XAC series carbide high-helical end mill, for high-hardness steel machining, multi-blade, 45° torsion / regular model
MISUMI
[Features]
-Designed with a tool shape that increases rigidity for machining high hardness steels
-Since it is designed with a large rake angle, it can also be used on machines where the cutting speed is not increased
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.- Volume Discount
- TiAlN
- High-Hardness Steel
- Multi-Flutes （5 ~）
Starting from∗ ： 40.63 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / short model
MISUMI
MISUMI's original "Z mill" that's thoroughly focused on the thrusting performance- Volume Discount
- TS
- General Steel
- 4 Flutes
- S (Short)
Starting from∗ ： 42.42 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Non-Coated TS Coated Carbide 0.1 mm Unit Corner C Designated End Mill
MISUMI
[Features]
-Alteration cutter that can determine the corner chamfer size of carbide cutters in 0.1 mm steps
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices etc.- Non-Coated
- General Steel
Min. Shipping Days ： 13 Days -
XCP Coated Carbide Square End Mill For Tempered Steel / High Hardness Steel Machining / 4-Flute / Stub / Short Type (Gash Land)
MISUMI
· A highly versatile series that's ideal for machining work materials from tempered steel (up to 45 HRC) to high hardness steel (up to 65 HRC).
· Coating with excellent hardness and heat resistance makes it suitable for high speed machining.
· Popular XCP series end mill with a shape that emphasizes blade tip rigidity- Volume Discount
Starting from∗ ： 32.66 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XCP Coated Carbide Square End Mill For Tempered Steel / High Hardness Steel Machining / 4-Flute / 2.5D / Regular Type (Gash Land)
MISUMI
· A highly versatile series that's ideal for machining work materials from tempered steel (up to 45 HRC) to high hardness steel (up to 65 HRC).
· Coating with excellent hardness and heat resistance makes it suitable for high speed machining.
· Available in MISUMI's extensive blade tip specifications- Volume Discount
Starting from∗ ： 25.15 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XCP Coated Carbide Square End Mill For Tempered Steel / High Hardness Steel Machining / 4-Flute / 45° Torsion / Short/Regular Type
MISUMI
· A highly versatile series that's ideal for machining work materials from tempered steel (up to 45 HRC) to high hardness steel (up to 65 HRC).
· Coating with excellent hardness and heat resistance makes it suitable for high speed machining.
· 45° high torsion end mill with a long contact surface between work material and blade that provides a long tool life.- Volume Discount
Starting from∗ ： 48.45 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC Series Carbide Uneven Lead 4-Flute Square End Mill
MISUMI
The long-awaited unequal lead 4-flute square end mill is introduced in the TSC Series (helix angle of 40° / 43°)- Volume Discount
Starting from∗ ： 45.45 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
VAC Series Carbide 2-Flute Square End Mill (Extra-Long Model)
MISUMI
[Features]
-Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered), and heat-treated steel (up to 50 HRC)
-Effective for machining deep parts due to extra-long blade length
-Ultra-fine-grained carbide base material and coating with excellent adhesion and heat resistance are used
-Can machine heat-treated steel up to 50HRC
-. Optimal for machining in low to medium rotation range due to universal 30° helix angle
-Coating with excellent lubricity provides stable abrasion resistance and improves workpiece shape accuracy (VAC coating has weak electrical conductivity. Please be careful when using an electric set-up device)
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
Starting from∗ ： 35.98 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
VAC Series Carbide 2-Flute Long Neck Square End Mill
MISUMI
[Features]
-Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered), and heat-treated steel (up to 50 HRC)
-Effective for deep cutting due to long neck type
-Ultra-fine particle carbide base material and coating with excellent adhesion and heat resistance are adopted
-Can machine heat-treated steel up to 50HRC
-. Optimal for machining in low to medium rotation range due to general 30° helix angle
-Coating with excellent lubricity provides stable abrasion resistance and improves workpiece shape accuracy (VAC coating has weak electrical conductivity. Please be careful when using an electric set-up device)
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
Starting from∗ ： 22.84 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
VAC Series Carbide 4-Flute Uneven Lead Square End Mill
MISUMI
[Features]
-Demonstrates high performance when machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-Suppresses chattering with uneven pitch and uneven flutes
-Ultra-fine particle carbide base material and coating with excellent adhesion and heat resistance are used
-Stable machining is possible while maintaining the accuracy of the finished surface
-Coating with excellent lubricity provides stable abrasion resistance and improves the shape accuracy of the workpiece (VAC coating has weak electrical conductivity. Please be careful when using an electric set-up device)
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
Starting from∗ ： 38.20 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
VAC Series Carbide 4-Flute Square End Mill (Extra-Long Model)
MISUMI
[Features]
-Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered), and heat-treated steel (up to 50 HRC)
-Effective for machining deep parts due to extra long blade length
-Ultra-fine-grained carbide base material and coating with excellent adhesion and heat resistance are used
-Can machine heat-treated steel up to 50HRC
-. Optimal for machining in low to medium rotation range due to universal 30° helix angle
-Coating with excellent lubricity provides stable abrasion resistance and improves workpiece shape accuracy (VAC coating has weak electrical conductivity. Please be careful when using an electric set-up device)
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
Starting from∗ ： 39.03 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
VAC Series Carbide 2-Flute Square End Mill
MISUMI
[Features]
-Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered), and heat-treated steel (up to 50 HRC)
-All-purpose blade with regular 2-blade length
-Ultra-fine carbide base material and coating with excellent adhesion and heat resistance are used
-Can machine heat-treated steel up to 50HRC
-. Optimal for machining in low to medium rotation range due to general purpose helix angle of 30°
-Coating with excellent lubricity provides stable abrasion resistance and improves workpiece shape accuracy (VAC coating has weak electrical conductivity. Please be careful when using an electric set-up device)
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
Starting from∗ ： 16.60 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Specifications |
| Blade diameter (D)(φ) |
| work material |
| Blade length (ℓ)(mm) |
| Number of flutes(sheet) |
| Type |
| Coating |
| Shank diameter (d)(mm) |
| Overall Length (L)(mm) |
| Underneck length (ℓ1)(mm) |
| Machining Application |
| Blade tip shape |
| Torsion Angle (θ) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
| Product Series | XAC series carbide roughing end mill, fine pitch / regular model | TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long shank, short model | TSC series carbide radius end mill for countersink, 3-flute / short model | TSC series carbide high-helical end mill, multi-flute, 53° spiral / regular model | TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / stub model | TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / short model | TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / SR Flute Length | TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / regular model | TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long model | TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long shank, short model | TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / stub model | TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / short model | TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / SR Flute Length model | TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / regular model | TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long model | TSC series carbide square end mill, 4-flute / 4D Flute Length (long) model | TSC series carbide end mill for key grooves, 2-flute / short model | TSC series carbide long neck square end mill, 3-flute, 45° spiral / long neck model | TSC series carbide high-helical end mill (cutting edge deflection accuracy of 5 μm or less) | TSC series carbide high-helical end mill, multi-flute, 53° spiral / short model | TSC series carbide roughing end mill, fine pitch / short model | TSC series carbide roughing end mill, fine pitch / regular model | TSC series carbide roughing end mill, fine pitch / long model | TSC series carbide roughing end mill, fine pitch / long regular model | TSC series carbide roughing end mill, 45° spiral / fine pitch / short model | TSC series carbide roughing end mill, 45° spiral / fine pitch / regular model | TSC series carbide roughing end mill, 45° spiral / fine pitch / long model | TS coated carbide roughing end mill, 45°spiral, fine pitch / long shank, regular model | TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / short model | Non-Coated TS Coated Carbide 0.1 mm Unit Corner C Designated End Mill | VAC Series Carbide 2-Flute Square End Mill (Extra-Long Model) | VAC Series Carbide 4-Flute Square End Mill (Extra-Long Model) | |||||||||||
| Starting from∗ | 44.57 € *Unit price with basic configuration Volume Discount | 63.49 € *Unit price with basic configuration Volume Discount | 45.94 € *Unit price with basic configuration Volume Discount | 61.53 € *Unit price with basic configuration Volume Discount | 53.95 € *Unit price with basic configuration Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | 77.95 € *Unit price with basic configuration Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | 38.96 € *Unit price with basic configuration Volume Discount | - Volume Discount | 98.32 € *Unit price with basic configuration Volume Discount | 94.04 € *Unit price with basic configuration Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | 40.63 € *Unit price with basic configuration Volume Discount | 42.42 € *Unit price with basic configuration Volume Discount | - | 32.66 € *Unit price with basic configuration Volume Discount | 25.15 € *Unit price with basic configuration Volume Discount | 48.45 € *Unit price with basic configuration Volume Discount | 45.45 € *Unit price with basic configuration Volume Discount | 35.98 € *Unit price with basic configuration Volume Discount | 22.84 € *Unit price with basic configuration Volume Discount | 38.20 € *Unit price with basic configuration Volume Discount | 39.03 € *Unit price with basic configuration Volume Discount | 16.60 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days ： | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 13 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days |
| Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||
| Blade diameter (D)(φ) | 3 ～ 12 | 6 ～ 20 | 6 ～ 20 | 2 ～ 22 | 3 ～ 16 | 1 ～ 20 | 1 ～ 12 | 1 ～ 20 | 3 ～ 16 | 1 ～ 20 | 2 ～ 20 | 2 ～ 20 | 1 ～ 16 | 1 ～ 20 | 3 ～ 16 | 1 ～ 20 | 2 ～ 20 | 1 ～ 12 | 2 ～ 14 | 1 ～ 6 | 3 ～ 12 | 3 ～ 12 | 1 ～ 12 | 5 ～ 20 | 3 ～ 20 | 6 ～ 20 | 5 ～ 20 | 5 ～ 20 | 3 ～ 20 | 6 ～ 20 | 6 ～ 20 | 6 ～ 25 | 3 ～ 12 | 2 ～ 12 | 1 ～ 12 | 1 ～ 16 | 2 ～ 12 | 2 ～ 25 | 1 ～ 20 | 0.2 ～ 12 | 2 ～ 20 | 1.5 ～ 25 | 0.3 ～ 20 |
| work material | High Hardness Steel: to HRC55[○] | High Hardness Steel: to HRC55[○] | High Hardness Steel: to HRC55[◎] | High Hardness Steel: to HRC55[○] | High Hardness Steel: to HRC55[○] | High Hardness Steel: to HRC55[○] | High Hardness Steel: to HRC55[○] | High Hardness Steel: to HRC55[○] | High Hardness Steel: to HRC55[○] | High Hardness Steel: to HRC55[○] | High Hardness Steel: to HRC55[○] | High Hardness Steel: to HRC55[○] | High Hardness Steel: to HRC55[○] | High Hardness Steel: to HRC55[○] | High Hardness Steel: to HRC55[○] | High Hardness Steel: to HRC55[○] | High Hardness Steel: to HRC55[○] | High Hardness Steel: to HRC55[○] | High Hardness Steel: to HRC55[○] | High Hardness Steel: to HRC55[○] | High Hardness Steel: to HRC55[○] | High Hardness Steel: to HRC55[○] | High Hardness Steel: to HRC55[○] | High Hardness Steel: to HRC55[○] | High Hardness Steel: to HRC55[○] | High Hardness Steel: to HRC55[○] | High Hardness Steel: to HRC55[○] | High Hardness Steel: to HRC55[○] | High Hardness Steel: to HRC55[○] | High Hardness Steel: to HRC55[○] | High Hardness Steel: to HRC55[○] | High Hardness Steel: to HRC55[◎] | High Hardness Steel: to HRC55[○] | High Hardness Steel: to HRC55[○] | High Hardness Steel: to HRC55[◎] | High Hardness Steel: to HRC55[◎] | High Hardness Steel: to HRC55[◎] | High Hardness Steel: to HRC55[○] | High Hardness Steel: to HRC55[○] | High Hardness Steel: to HRC55[○] | High Hardness Steel: to HRC55[○] | High Hardness Steel: to HRC55[○] | High Hardness Steel: to HRC55[○] |
| Blade length (ℓ)(mm) | 8 ～ 30 | 16 ～ 38 | 26 ～ 76 | 3.5 ～ 30 | 8 ～ 32 | 2.5 ～ 45 | 1.5 ～ 18 | 3 ～ 38 | 5 ～ 40 | 4 ～ 56 | 5 ～ 75 | 3.5 ～ 30 | 1.5 ～ 24 | 3 ～ 38 | 5 ～ 40 | 4 ～ 56 | 5 ～ 75 | 4 ～ 48 | 3 ～ 21 | 1.5 ～ 13 | 4.5 ～ 18 | 10 ～ 30 | 2 ～ 24 | 10 ～ 38 | 15 ～ 45 | 25 ～ 65 | 15 ～ 45 | 10 ～ 38 | 15 ～ 45 | 25 ～ 65 | 15 ～ 45 | 13 ～ 44 | 8 ～ 26 | 3 ～ 36 | 2 ～ 24 | 2.5 ～ 40 | 6 ～ 38 | 4 ～ 50 | 4 ～ 80 | 0.3 ～ 20 | 6 ～ 45 | 6 ～ 120 | 0.6 ～ 45 |
| Number of flutes(sheet) | 3 ～ 4 | 3 ～ 4 | 6 ～ 8 | 4 | 3 | 4 ～ 6 | 3 | 3 | 3 | 3 | 3 | 3 | 4 | 4 | 4 | 4 | 4 | 4 | 2 | 3 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 4 | 3 ～ 4 | 4 | 3 ～ 4 | 3 ～ 4 | 3 ～ 4 | 3 ～ 4 | 3 ～ 4 | 6 ～ 8 | 4 | 2 ～ 4 | 4 | 4 | 4 | 4 | 2 | 2 | 4 | 4 | 2 |
| Type | Roughing | Roughing | High Helical | Square | Square | High Helical | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Long-Neck Square | High Helical | High Helical | High Helical | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | High Helical | Square | Square | Square | Square | Square | Square | Square | Long-Neck Square | Square | Square | Square |
| Coating | - | TiAlN | TiAlN | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | TiAlN | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | - | - | - | - | - |
| Shank diameter (d)(mm) | 6 ～ 12 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | 6 ～ 16 | 6 ～ 20 | 6 ～ 12 | 4 ～ 20 | 6 ～ 16 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | 6 ～ 16 | 4 ～ 20 | 6 ～ 16 | 6 ～ 20 | 6 ～ 20 | 4 ～ 12 | 6 ～ 16 | 4 ～ 6 | 6 ～ 12 | 6 ～ 12 | 6 ～ 12 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | 6 ～ 25 | 6 ～ 12 | 4 ～ 12 | 3 ～ 12 | 3 ～ 16 | 6 ～ 12 | 6 ～ 25 | 6 ～ 20 | 4 ～ 12 | 6 ～ 20 | 4 ～ 25 | 4 ～ 20 |
| Overall Length (L)(mm) | 50 ～ 80 | 57 ～ 104 | 70 ～ 140 | 80 ～ 200 | 50 ～ 110 | 60 ～ 130 | 60 ～ 100 | 60 ～ 110 | 60 ～ 110 | 60 ～ 130 | 60 ～ 150 | 80 ～ 200 | 60 ～ 110 | 60 ～ 110 | 60 ～ 110 | 60 ～ 130 | 60 ～ 150 | 45 ～ 100 | 45 ～ 75 | 50 ～ 100 | 50 ～ 75 | 60 ～ 100 | 60 ～ 100 | 57 ～ 104 | 60 ～ 130 | 100 ～ 150 | 100 ～ 150 | 60 ～ 110 | 60 ～ 130 | 100 ～ 150 | 100 ～ 150 | 57 ～ 104 | 60 ～ 100 | 40 ～ 85 | 40 ～ 75 | 40 ～ 120 | 60 ～ 100 | 50 ～ 120 | 60 ～ 200 | 40 ～ 110 | 50 ～ 100 | 60 ～ 250 | 40 ～ 100 |
| Underneck length (ℓ1)(mm) | - | - | - | 30 ～ 140 | - | 20 ～ 92 | 14 ～ 68 | 18 ～ 73 | 22 ～ 78 | 26 ～ 92 | 30 ～ 112 | 30 ～ 140 | 14 ～ 74 | 18 ～ 72 | 22 ～ 78 | 26 ～ 92 | 30 ～ 112 | 29 ～ 70 | - | 4 ～ 60 | - | - | 17 ～ 70 | 17 ～ 66 | 20 ～ 92 | 30 ～ 112 | 20 ～ 95 | 17 ～ 72 | 20 ～ 92 | 30 ～ 112 | 20 ～ 95 | - | - | - | 5 ～ 25 | - | - | - | - | 0.5 ～ 50 | - | - | - |
| Machining Application | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking |
| Blade tip shape | - | C plane | With Lead | Sharp Edge / With Lead | Sharp Edge | Sharp Edge | With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | With Lead | With Lead | With Lead | Sharp Edge / With Lead | With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge | With Lead | Sharp Edge | Sharp Edge | Sharp Edge | Micro R | Micro R | Micro R | Micro R | C plane | C plane | C plane | C plane | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | - | - | - | - | - |
| Torsion Angle (θ) | - | Weak torsion (15˚ to 25˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | Standard Helix (30˚ to 40˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | Standard Helix (30˚ to 40˚) | Weak torsion (15˚ to 25˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | Weak torsion (15˚ to 25˚) | Weak torsion (15˚ to 25˚) | Weak torsion (15˚ to 25˚) | Weak torsion (15˚ to 25˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | High Helix (45˚ to 60˚) | Variable lead | - | - | - | - | - |
Loading...
Filter by:
Narrow search by specifying spec./dim.
-
Blade diameter (D)(φ)
-
0.01～0.99
- 0.01
- 0.02
- 0.03
- 0.04
- 0.05
- 0.06
- 0.07
- 0.08
- 0.09
- 0.1
- 0.11
- 0.12
- 0.13
- 0.14
- 0.15
- 0.16
- 0.17
- 0.18
- 0.19
- 0.2
- 0.21
- 0.22
- 0.23
- 0.24
- 0.25
- 0.26
- 0.27
- 0.28
- 0.29
- 0.3
- 0.31
- 0.32
- 0.33
- 0.34
- 0.35
- 0.36
- 0.37
- 0.38
- 0.39
- 0.4
- 0.41
- 0.42
- 0.43
- 0.44
- 0.45
- 0.46
- 0.47
- 0.48
- 0.49
- 0.5
- 0.51
- 0.52
- 0.53
- 0.54
- 0.55
- 0.56
- 0.57
- 0.58
- 0.59
- 0.6
- 0.61
- 0.62
- 0.63
- 0.64
- 0.65
- 0.66
- 0.67
- 0.68
- 0.69
- 0.7
- 0.71
- 0.72
- 0.73
- 0.74
- 0.75
- 0.76
- 0.77
- 0.78
- 0.79
- 0.8
- 0.81
- 0.82
- 0.83
- 0.84
- 0.85
- 0.86
- 0.87
- 0.88
- 0.89
- 0.9
- 0.91
- 0.92
- 0.93
- 0.94
- 0.95
- 0.96
- 0.97
- 0.98
- 0.99
-
1～1.99
- 1
- 1.01
- 1.02
- 1.03
- 1.04
- 1.05
- 1.06
- 1.07
- 1.08
- 1.09
- 1.1
- 1.11
- 1.12
- 1.13
- 1.14
- 1.15
- 1.16
- 1.17
- 1.18
- 1.19
- 1.2
- 1.21
- 1.22
- 1.23
- 1.24
- 1.25
- 1.26
- 1.27
- 1.28
- 1.29
- 1.3
- 1.31
- 1.32
- 1.33
- 1.34
- 1.35
- 1.36
- 1.37
- 1.38
- 1.39
- 1.4
- 1.41
- 1.42
- 1.43
- 1.44
- 1.45
- 1.46
- 1.47
- 1.48
- 1.49
- 1.5
- 1.51
- 1.52
- 1.53
- 1.54
- 1.55
- 1.56
- 1.57
- 1.58
- 1.59
- 1.6
- 1.61
- 1.62
- 1.63
- 1.64
- 1.65
- 1.66
- 1.67
- 1.68
- 1.69
- 1.7
- 1.71
- 1.72
- 1.73
- 1.74
- 1.75
- 1.76
- 1.77
- 1.78
- 1.79
- 1.8
- 1.81
- 1.82
- 1.83
- 1.84
- 1.85
- 1.86
- 1.87
- 1.88
- 1.89
- 1.9
- 1.91
- 1.92
- 1.93
- 1.94
- 1.95
- 1.96
- 1.97
- 1.98
- 1.99
-
2～2.99
- 2
- 2.01
- 2.02
- 2.03
- 2.04
- 2.05
- 2.06
- 2.07
- 2.08
- 2.09
- 2.1
- 2.11
- 2.12
- 2.13
- 2.14
- 2.15
- 2.16
- 2.17
- 2.18
- 2.19
- 2.2
- 2.21
- 2.22
- 2.23
- 2.24
- 2.25
- 2.26
- 2.27
- 2.28
- 2.29
- 2.3
- 2.31
- 2.32
- 2.33
- 2.34
- 2.35
- 2.36
- 2.37
- 2.38
- 2.39
- 2.4
- 2.41
- 2.42
- 2.43
- 2.44
- 2.45
- 2.46
- 2.47
- 2.48
- 2.49
- 2.5
- 2.51
- 2.52
- 2.53
- 2.54
- 2.55
- 2.56
- 2.57
- 2.58
- 2.59
- 2.6
- 2.61
- 2.62
- 2.63
- 2.64
- 2.65
- 2.66
- 2.67
- 2.68
- 2.69
- 2.7
- 2.71
- 2.72
- 2.73
- 2.74
- 2.75
- 2.76
- 2.77
- 2.78
- 2.79
- 2.8
- 2.81
- 2.82
- 2.83
- 2.84
- 2.85
- 2.86
- 2.87
- 2.88
- 2.89
- 2.9
- 2.91
- 2.92
- 2.93
- 2.94
- 2.95
- 2.96
- 2.97
- 2.98
- 2.99
-
3～3.99
- 3
- 3.01
- 3.02
- 3.03
- 3.04
- 3.05
- 3.06
- 3.07
- 3.08
- 3.09
- 3.1
- 3.11
- 3.12
- 3.13
- 3.14
- 3.15
- 3.16
- 3.17
- 3.175
- 3.18
- 3.19
- 3.2
- 3.21
- 3.22
- 3.23
- 3.24
- 3.25
- 3.26
- 3.27
- 3.28
- 3.29
- 3.3
- 3.31
- 3.32
- 3.33
- 3.34
- 3.35
- 3.36
- 3.37
- 3.38
- 3.39
- 3.4
- 3.41
- 3.42
- 3.43
- 3.44
- 3.45
- 3.46
- 3.47
- 3.48
- 3.49
- 3.5
- 3.51
- 3.52
- 3.53
- 3.54
- 3.55
- 3.56
- 3.57
- 3.58
- 3.59
- 3.6
- 3.61
- 3.62
- 3.63
- 3.64
- 3.65
- 3.66
- 3.67
- 3.68
- 3.69
- 3.7
- 3.71
- 3.72
- 3.73
- 3.74
- 3.75
- 3.76
- 3.77
- 3.78
- 3.79
- 3.8
- 3.81
- 3.82
- 3.83
- 3.84
- 3.85
- 3.86
- 3.87
- 3.88
- 3.89
- 3.9
- 3.91
- 3.92
- 3.93
- 3.94
- 3.95
- 3.96
- 3.97
- 3.98
- 3.99
-
4～4.99
- 4
- 4.01
- 4.02
- 4.03
- 4.04
- 4.05
- 4.06
- 4.07
- 4.08
- 4.09
- 4.1
- 4.11
- 4.12
- 4.13
- 4.14
- 4.15
- 4.16
- 4.17
- 4.18
- 4.19
- 4.2
- 4.21
- 4.22
- 4.23
- 4.24
- 4.25
- 4.26
- 4.27
- 4.28
- 4.29
- 4.3
- 4.31
- 4.32
- 4.33
- 4.34
- 4.35
- 4.36
- 4.37
- 4.38
- 4.39
- 4.4
- 4.41
- 4.42
- 4.43
- 4.44
- 4.45
- 4.46
- 4.47
- 4.48
- 4.49
- 4.5
- 4.51
- 4.52
- 4.53
- 4.54
- 4.55
- 4.56
- 4.57
- 4.58
- 4.59
- 4.6
- 4.61
- 4.62
- 4.63
- 4.64
- 4.65
- 4.66
- 4.67
- 4.68
- 4.69
- 4.7
- 4.71
- 4.72
- 4.73
- 4.74
- 4.75
- 4.76
- 4.77
- 4.775
- 4.78
- 4.79
- 4.8
- 4.81
- 4.82
- 4.83
- 4.84
- 4.85
- 4.86
- 4.87
- 4.88
- 4.89
- 4.9
- 4.91
- 4.92
- 4.93
- 4.94
- 4.95
- 4.96
- 4.97
- 4.98
- 4.99
-
5～5.99
- 5
- 5.01
- 5.02
- 5.03
- 5.04
- 5.05
- 5.06
- 5.07
- 5.08
- 5.09
- 5.1
- 5.11
- 5.12
- 5.13
- 5.14
- 5.15
- 5.16
- 5.17
- 5.18
- 5.19
- 5.2
- 5.21
- 5.22
- 5.23
- 5.24
- 5.25
- 5.26
- 5.27
- 5.28
- 5.29
- 5.3
- 5.31
- 5.32
- 5.33
- 5.34
- 5.35
- 5.36
- 5.37
- 5.38
- 5.39
- 5.4
- 5.41
- 5.42
- 5.43
- 5.44
- 5.45
- 5.46
- 5.47
- 5.48
- 5.49
- 5.5
- 5.51
- 5.52
- 5.53
- 5.54
- 5.55
- 5.56
- 5.57
- 5.58
- 5.59
- 5.6
- 5.61
- 5.62
- 5.63
- 5.64
- 5.65
- 5.66
- 5.67
- 5.68
- 5.69
- 5.7
- 5.71
- 5.72
- 5.73
- 5.74
- 5.75
- 5.76
- 5.77
- 5.78
- 5.79
- 5.8
- 5.81
- 5.82
- 5.83
- 5.84
- 5.85
- 5.86
- 5.87
- 5.88
- 5.89
- 5.9
- 5.91
- 5.92
- 5.93
- 5.94
- 5.95
- 5.96
- 5.97
- 5.98
- 5.99
-
6～6.9
- 6
- 6H
- 6.01
- 6.05
- 6.1
- 6.2
- 6.25
- 6.3
- 6.35
- 6.4
- 6.5
- 6.57
- 6.6
- 6.7
- 6.75
- 6.8
- 6.9
-
7～7.99
- 7
- 7.01
- 7.02
- 7.03
- 7.04
- 7.05
- 7.06
- 7.07
- 7.08
- 7.09
- 7.1
- 7.11
- 7.12
- 7.13
- 7.14
- 7.15
- 7.16
- 7.17
- 7.18
- 7.19
- 7.2
- 7.21
- 7.22
- 7.23
- 7.24
- 7.25
- 7.26
- 7.27
- 7.28
- 7.29
- 7.3
- 7.31
- 7.32
- 7.33
- 7.34
- 7.35
- 7.36
- 7.37
- 7.38
- 7.39
- 7.4
- 7.41
- 7.42
- 7.43
- 7.44
- 7.45
- 7.46
- 7.47
- 7.48
- 7.49
- 7.5
- 7.51
- 7.52
- 7.53
- 7.54
- 7.55
- 7.56
- 7.57
- 7.58
- 7.59
- 7.6
- 7.61
- 7.62
- 7.63
- 7.64
- 7.65
- 7.66
- 7.67
- 7.68
- 7.69
- 7.7
- 7.71
- 7.72
- 7.73
- 7.74
- 7.75
- 7.76
- 7.77
- 7.78
- 7.79
- 7.8
- 7.81
- 7.82
- 7.83
- 7.84
- 7.85
- 7.86
- 7.87
- 7.88
- 7.89
- 7.9
- 7.91
- 7.92
- 7.93
- 7.94
- 7.95
- 7.96
- 7.97
- 7.98
- 7.99
-
8～8.9
- 8
- 8H
- 8.01
- 8.02
- 8.1
- 8.15
- 8.2
- 8.21
- 8.25
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.75
- 8.8
- 8.9
-
9～9.99
- 9
- 9.01
- 9.02
- 9.03
- 9.04
- 9.05
- 9.06
- 9.07
- 9.08
- 9.09
- 9.1
- 9.11
- 9.12
- 9.13
- 9.14
- 9.15
- 9.16
- 9.17
- 9.18
- 9.19
- 9.2
- 9.21
- 9.22
- 9.23
- 9.24
- 9.25
- 9.26
- 9.27
- 9.28
- 9.29
- 9.3
- 9.31
- 9.32
- 9.33
- 9.34
- 9.35
- 9.36
- 9.37
- 9.38
- 9.39
- 9.4
- 9.41
- 9.42
- 9.43
- 9.44
- 9.45
- 9.46
- 9.47
- 9.48
- 9.49
- 9.5
- 9.51
- 9.52
- 9.525
- 9.53
- 9.54
- 9.55
- 9.56
- 9.57
- 9.58
- 9.59
- 9.6
- 9.61
- 9.62
- 9.63
- 9.64
- 9.65
- 9.66
- 9.67
- 9.68
- 9.69
- 9.7
- 9.71
- 9.72
- 9.73
- 9.74
- 9.75
- 9.76
- 9.77
- 9.78
- 9.79
- 9.8
- 9.81
- 9.82
- 9.83
- 9.84
- 9.85
- 9.86
- 9.87
- 9.88
- 9.89
- 9.9
- 9.91
- 9.92
- 9.93
- 9.94
- 9.95
- 9.96
- 9.97
- 9.98
- 9.99
-
10～10.9
- 10
- 10H
- 10.1
- 10.15
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.99
- 11
- 11.01
- 11.02
- 11.03
- 11.04
- 11.05
- 11.06
- 11.07
- 11.08
- 11.09
- 11.1
- 11.11
- 11.12
- 11.13
- 11.14
- 11.15
- 11.16
- 11.17
- 11.18
- 11.19
- 11.2
- 11.21
- 11.22
- 11.23
- 11.24
- 11.25
- 11.26
- 11.27
- 11.28
- 11.29
- 11.3
- 11.31
- 11.32
- 11.33
- 11.34
- 11.35
- 11.36
- 11.37
- 11.38
- 11.39
- 11.4
- 11.41
- 11.42
- 11.43
- 11.44
- 11.45
- 11.46
- 11.47
- 11.48
- 11.49
- 11.5
- 11.51
- 11.52
- 11.53
- 11.54
- 11.55
- 11.56
- 11.57
- 11.58
- 11.59
- 11.6
- 11.61
- 11.62
- 11.63
- 11.64
- 11.65
- 11.66
- 11.67
- 11.68
- 11.69
- 11.7
- 11.71
- 11.72
- 11.73
- 11.74
- 11.75
- 11.76
- 11.77
- 11.78
- 11.79
- 11.8
- 11.81
- 11.82
- 11.83
- 11.84
- 11.85
- 11.86
- 11.87
- 11.88
- 11.89
- 11.9
- 11.91
- 11.92
- 11.93
- 11.94
- 11.95
- 11.96
- 11.97
- 11.98
- 11.99
-
12～12.9
- 12
- 12H
- 12.1
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.7
- 12.8
- 12.9
-
13～13.9
- 13
- 13.1
- 13.2
- 13.3
- 13.4
- 13.5
- 13.6
- 13.7
- 13.8
- 13.9
-
14～14.9
- 14
- 14.1
- 14.2
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
- 14.9
-
15～15.99
- 15
- 15.1
- 15.2
- 15.3
- 15.4
- 15.5
- 15.51
- 15.52
- 15.53
- 15.54
- 15.55
- 15.56
- 15.57
- 15.58
- 15.59
- 15.6
- 15.61
- 15.62
- 15.63
- 15.64
- 15.65
- 15.66
- 15.67
- 15.68
- 15.69
- 15.7
- 15.71
- 15.72
- 15.73
- 15.74
- 15.75
- 15.76
- 15.77
- 15.78
- 15.79
- 15.8
- 15.81
- 15.82
- 15.83
- 15.84
- 15.85
- 15.86
- 15.87
- 15.875
- 15.88
- 15.89
- 15.9
- 15.91
- 15.92
- 15.93
- 15.94
- 15.95
- 15.96
- 15.97
- 15.98
- 15.99
-
16～16.9
- 16
- 16.1
- 16.2
- 16.3
- 16.4
- 16.5
- 16.6
- 16.7
- 16.8
- 16.9
-
17～17.9
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.5
- 17.6
- 17.7
- 17.8
- 17.9
-
18～18.9
- 18
- 18.1
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.7
- 18.8
- 18.9
-
19～19.99
- 19
- 19..5
- 19.05
- 19.1
- 19.2
- 19.3
- 19.4
- 19.5
- 19.51
- 19.52
- 19.53
- 19.54
- 19.55
- 19.56
- 19.57
- 19.58
- 19.59
- 19.6
- 19.61
- 19.62
- 19.63
- 19.64
- 19.65
- 19.66
- 19.67
- 19.68
- 19.69
- 19.7
- 19.71
- 19.72
- 19.73
- 19.74
- 19.75
- 19.76
- 19.77
- 19.78
- 19.79
- 19.8
- 19.81
- 19.82
- 19.83
- 19.84
- 19.85
- 19.86
- 19.87
- 19.88
- 19.89
- 19.9
- 19.91
- 19.92
- 19.93
- 19.94
- 19.95
- 19.96
- 19.97
- 19.98
- 19.99
-
20～20.5
- 20
- 20.5
-
21～21.5
- 21
- 21.5
-
22～22.5
- 22
- 22.5
-
23～23.5
- 23
- 23.5
-
24～24.5
- 24
- 24.5
-
25～25.5
- 25
- 25.4
- 25.5
-
26～26.5
- 26
- 26.5
-
27～27.5
- 27
- 27.5
-
28～28.5
- 28
- 28.5
-
29～29.5
- 29
- 29.5
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
-
work material
-
Blade length (ℓ)(mm)
-
0.01～0.9
- 0.01
- 0.02
- 0.03
- 0.04
- 0.045
- 0.05
- 0.06
- 0.07
- 0.075
- 0.08
- 0.09
- 0.1
- 0.105
- 0.12
- 0.135
- 0.15
- 0.16
- 0.2
- 0.23
- 0.24
- 0.25
- 0.3
- 0.32
- 0.4
- 0.45
- 0.5
- 0.55
- 0.6
- 0.65
- 0.7
- 0.75
- 0.8
- 0.9
-
1～1.9
- 1
- 1.05
- 1.1
- 1.2
- 1.25
- 1.3
- 1.35
- 1.4
- 1.5
- 1.6
- 1.7
- 1.75
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 2.9
-
3～3.96
- 3
- 3.1
- 3.18
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.75
- 3.8
- 3.9
- 3.96
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.3688
- 4.4
- 4.5
- 4.6
- 4.7
- 4.78
- 4.8
- 4.9
-
5～5.9
- 5
- 5.1
- 5.2
- 5.25
- 5.3
- 5.4
- 5.5
- 5.5626
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.1
- 6.2
- 6.25
- 6.3
- 6.35
- 6.4
- 6.5
- 6.6
- 6.7
- 6.75
- 6.8
- 6.9
-
7～7.9502
- 7
- 7.1
- 7.2
- 7.3
- 7.4
- 7.5
- 7.5438
- 7.6
- 7.7
- 7.8
- 7.9
- 7.9502
-
8～8.9
- 8
- 8.1
- 8.2
- 8.25
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.8
- 8.9
-
9～9.9
- 9
- 9.1
- 9.1186
- 9.2
- 9.3
- 9.4
- 9.5
- 9.52
- 9.525
- 9.6
- 9.7
- 9.8
- 9.9
-
10～10.9
- 10
- 10.1
- 10.2
- 10.3
- 10.3124
- 10.4
- 10.49
- 10.5
- 10.6
- 10.7
- 10.7188
- 10.8
- 10.9
-
11～11.9126
- 11
- 11.0998
- 11.1
- 11.2
- 11.3
- 11.4
- 11.5
- 11.5062
- 11.6
- 11.7
- 11.8
- 11.9
- 11.9126
-
12
-
12～12.9
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.7
- 12.8
- 12.9
-
13～13.8938
- 13
- 13.1
- 13.2
- 13.3
- 13.4
- 13.4874
- 13.5
- 13.6
- 13.7
- 13.8
- 13.8938
-
14～14.9
- 14
- 14.1
- 14.2
- 14.2748
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
- 14.9
-
15～15.9
- 15
- 15.2
- 15.3
- 15.4
- 15.5
- 15.6
- 15.8
- 15.875
- 15.88
- 15.9
-
16～16.8
- 16
- 16.2
- 16.4
- 16.5
- 16.6
- 16.8
-
17～17.8
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.4498
- 17.5
- 17.6
- 17.7
- 17.8
-
18～18.8
- 18
- 18.2
- 18.2626
- 18.3
- 18.4
- 18.5
- 18.6
- 18.8
-
19～19.8
- 19
- 19.05
- 19.2
- 19.4
- 19.5
- 19.6
- 19.8
-
20～20.8
- 20
- 20.1
- 20.2
- 20.3
- 20.4
- 20.5
- 20.6
- 20.6502
- 20.7
- 20.8
-
21～21.9
- 21
- 21.2
- 21.3
- 21.4
- 21.4376
- 21.5
- 21.6
- 21.8
- 21.9
-
22～22.8
- 22
- 22.2
- 22.225
- 22.4
- 22.5
- 22.6
- 22.8
-
23～23.8
- 23
- 23.1
- 23.2
- 23.3
- 23.4
- 23.4188
- 23.5
- 23.6
- 23.7998
- 23.8
-
24～24.9
- 24
- 24.2
- 24.3
- 24.4
- 24.5
- 24.6
- 24.8
- 24.9
-
25～25.8
- 25
- 25.2
- 25.4
- 25.5
- 25.6
- 25.8
-
26～26.8
- 26
- 26.1874
- 26.2
- 26.4
- 26.5
- 26.6
- 26.7
- 26.8
-
27～27.9
- 27
- 27.0002
- 27.2
- 27.3
- 27.4
- 27.5
- 27.6
- 27.7876
- 27.8
- 27.9
-
28～28.8
- 28
- 28.2
- 28.4
- 28.5
- 28.575
- 28.8
-
29～29.8
- 29
- 29.1
- 29.2
- 29.5
- 29.6
- 29.7
- 29.8
-
30～30.9626
- 30
- 30.1752
- 30.3
- 30.4
- 30.5
- 30.6
- 30.8
- 30.9
- 30.9626
-
31～31.8
- 31
- 31.2
- 31.5
- 31.6
- 31.75
- 31.8
-
32～32.8
- 32
- 32.1
- 32.4
- 32.5
- 32.7
- 32.8
-
33～33.9
- 33
- 33.2
- 33.3
- 33.3502
- 33.6
- 33.9
-
34～34.8
- 34
- 34.2
- 34.4
- 34.5
- 34.8
-
35～35.8
- 35
- 35.1
- 35.2
- 35.4
- 35.5
- 35.6
- 35.7
- 35.8
-
36～36.8
- 36
- 36.4
- 36.4998
- 36.5
- 36.8
-
37～37.6936
- 37
- 37.2
- 37.5
- 37.6
- 37.6936
-
38～38.8
- 38
- 38.4
- 38.5
- 38.8
-
39～39.7002
- 39
- 39.2
- 39.5
- 39.6
- 39.7002
-
40～40.8
- 40
- 40.4
- 40.4876
- 40.5
- 40.8
-
41～41.6
- 41
- 41.2
- 41.28
- 41.5
- 41.6
-
42～42.8498
- 42
- 42.4
- 42.5
- 42.8
- 42.8498
-
43～43.6
- 43
- 43.2
- 43.5
- 43.6
-
44～44.8
- 44
- 44.4
- 44.5
- 44.8
-
45～45.5
- 45
- 45.2
- 45.5
-
46～46.8
- 46
- 46.4
- 46.4312
- 46.5
- 46.8
-
47～47.8
- 47
- 47.2
- 47.5
- 47.6
- 47.8
-
48～48.5
- 48
- 48.5
-
49～49.5
- 49
- 49.2252
- 49.5
-
50～50.8
- 50
- 50.5
- 50.8
-
51～51.5
- 51
- 51.5
-
52
-
53～53.5
- 53
- 53.1876
- 53.5
-
54～54.5
- 54
- 54.5
-
55～55.5
- 55
- 55.5
-
56
-
57～57.5
- 57
- 57.15
- 57.5
-
58～58.7502
- 58
- 58.5
- 58.7502
-
59～59.5376
- 59
- 59.5
- 59.5376
-
60～60.5
- 60
- 60.5
-
62
-
63～63.5
- 63
- 63.5
-
64
-
65
-
66
-
67
-
70～70.5
- 70
- 70.5
-
72
-
75
-
76
-
77.95
-
78
-
80
-
82
-
83
-
85
-
90
-
95
-
100
-
103
-
106
-
110
-
112
-
115
-
120
-
125
-
130
-
150
-
200
[5-75/1mm Unit(s)]
-
-
Number of flutes(sheet)
-
Type
- Square
- Roughing
- Long-Neck Square
- High Helical
-
Coating
-
Shank diameter (d)(mm)
-
Overall Length (L)(mm)
-
Underneck length (ℓ1)(mm)
-
Machining Application
-
Blade tip shape
-
Torsion Angle (θ)
Narrow search by specifying Brand
-
- MISUMI (43)
- NS TOOL (46)
- OSG (36)
- NACHI(FUJIKOSHI) (34)
- KYOCERA (14)
- SANKO MFG (13)
- OKAZAKI SEIKO (11)
- UNION TOOL (11)
- SANDVIK (10)
- 7 LEADERS (6)
- ASAHI TOOLS (6)
- DIJET (5)
- THE CUT (4)
- TOYO DRILL (3)
- SPEED TIGER (3)
- GCT (2)
- VAN_HOORN (2)
- WIDIN (0)
- EIKOSHA (0)
- PROCHI (0)
- ATOM (0)
- KYOWA SEIKO (0)
- TAIYO-TOOL (0)
- GUHRING (0)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Carbide Square End Mills
Fizetési mód
Átutalás
Előre fizetés
Igény szerinti gyártás
Tanúsítványok
Copyright © MISUMI Corporation Minden jog fenntartva.