MAEDLER Transmissions, Reducers（Type：Bevel gear）

?* Information on days to ship and prices

• 

  Bevel Gearboxes DZA, Version A

  MAEDLER

  General data: 4 sizes.
  Ratio either 1 : 1 or 2 : 1. Any mounting position possible.
  Ratio for gearing up to max. 750 min^-1 possible.
  Housing: Thick-walled, one-piece cast aluminium housing, fully oil-tight and dust-proof.
  Gearing: Spiral teeth, hardened.
  Shafts/bearing system: Input and output shaft are ground and mounted on ball bearings. From size 2 with keyways.
  Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free.
  Angular backlash: 15 to 30 angular minutes.
  Permissable operating temperature: -18ºC to +80ºC.

  • Volume Discount

  Starting from∗ ：	174.53 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Bevel Gearboxes HUG, Ratio 1:1

  MAEDLER

  General: Miniaturised right-angle drives for light duty.
  Suitable for manual and short term drive applications.
  Housing: Gear cases are injection moulded in filled polyamide 6.6 for low moisture take up, low thermal expansion, high rigidity.
  Electrical insulating. Shafts hardened and ground.
  Gearing: straight teeth, max. backlash 2º. Speed max. 1,000min^-1.
  Version A: with steel bevel gears, bonded onto the shafts.
  Version B: with polyacetal bevel gears, moulded onto the shafts.

  • Volume Discount

  Starting from∗ ：	49.77 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Bevel Gearboxes KEK Version A

  MAEDLER

  Angular drives with high torques at very low dimensions.
  Suitable in a wide variety of applications
  8 Sizes. Ratio 1:1.
  Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust. Can be mounted in any position.
  Gearing: Bevel gears from steel, surface hardened.
  Bearing: Ball bearings with rubber seal RS.
  Lubrication: Maintenance free grease lubrication.
  Angular backlash: 3°+/-1°.
  Operating time: 20% at 5 min.
  Life time: 1,000 hours at max. performance at speed 500 min^-1 and operating time 20%.
  Permissable operating temperature: -20° to +60°C.
  
  * Not according to DIN 6885.

  • Volume Discount

  Starting from∗ ：	122.15 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Miniature Bevel Gearboxes MKU Model L

  MAEDLER

  Miniature angular gear unit for particularly high loads and long service life. Very robust construction, as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available in ratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.
  
  General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire.
  Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceutic industry and with grease lubrication.
  Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces.The diameters c, l₁ and l₂ are provided for use as alignment studs.
  Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.
  Bearing: Life time min. 15,000h.
  Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.
  
  Model L: Straight-through output shaft, slowly turning.
  
  Permiss. Ambient temperature -10°C to +90°C.

  • Volume Discount

  Starting from∗ ：	316.14 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Bevel Gearboxes DZA, Version B

  MAEDLER

  General data: 4 sizes.
  Ratio either 1 : 1 or 2 : 1. Any mounting position possible.
  Ratio for gearing up to max. 750 min^-1 possible.
  Housing: Thick-walled, one-piece cast aluminium housing, fully oil-tight and dust-proof.
  Gearing: Spiral teeth, hardened.
  Shafts/bearing system: Input and output shaft are ground and mounted on ball bearings. From size 2 with keyways.
  Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free.
  Angular backlash: 15 to 30 angular minutes.
  Permissable operating temperature: -18ºC to +80ºC.

  • Volume Discount

  Starting from∗ ：	180.35 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Bevel Gearboxes DZR, Stainless Steel, Version B

  MAEDLER

  General data: High resistance to corrosion.
  4 sizes.
  Ratio either 1 : 1 or 2 : 1. Any mounting position possible.
  Ratio for gearing up to max. 750 min^-1 possible.
  Housing: Stainless steel 1.4401 (V4A / AISI 316). Thick-walled, one-piece housing, fully oil-tight and dust-proof.
  Gearing: Spiral teeth, hardened.
  Shafts/bearing system: Stainless steel 1.4401 (V4A / AISI 316), ground and mounted on ball bearings. From size 2 with keyways.
  Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free.
  Angular backlash: 15 to 30 angular minutes.
  Permissable operating temperature: -18ºC to +80ºC.

  • Volume Discount

  Starting from∗ ：	667.48 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Miniature Bevel Gearboxes MKU Model H

  MAEDLER

  Miniature angular gear unit for particularly high loads and long service life. Very robust construction, as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available in ratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.
  
  General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire.
  Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceutic industry and with grease lubrication.
  Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces.The diameters c, l₁ and l₂ are provided for use as alignment studs.
  Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.
  Bearing: Life time min. 15,000h.
  Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.
  
  Model H: Straight-through output hollow shaft, slowly turning.
  
  Permiss. Ambient temperature -10°C to +90°C.

  • Volume Discount

  Starting from∗ ：	334.06 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Miniature Bevel Gearboxes MKU Model K

  MAEDLER

  Miniature angular gear unit for particularly high loads and long service life. Very robust construction, as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available in ratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.
  
  General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire.
  Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceutic industry and with grease lubrication.
  Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces.The diameters c, l₁ and l₂ are provided for use as alignment studs.
  Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.
  Bearing: Life time min. 15,000h.
  Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.
  
  Model K: Input side C: Transmission ratio for gearing down.
  
  Permiss. Ambient temperature -10°C to +90°C.

  • Volume Discount

  Starting from∗ ：	316.14 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Bevel Gearboxes DZA Model H, Size 2

  MAEDLER

  General data: Gearbox with hollow shaft on the output side.
  Ratio either 1 : 1 or 2 : 1 or 3 : 1. Any mounting position possible.
  The maximum input speed (hollow shaft as input device) for gearing up is 750 min^-1 at 2 : 1 and 500 min^-1 at 3 : 1.
  Housing: Thick-walled, one-piece cast aluminium housing, fully oil-tight and dust-proof.
  Gearing: Spiral teeth, hardened.
  Shafts/bearing system: Input and output shaft are ground and mounted on ball bearings.
  Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free.
  Angular backlash: 15 to 30 angular minutes.
  Permissable operating temperature: -18ºC to +80ºC.

  • Volume Discount

  Starting from∗ ：	454.84 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Bevel Gearboxes DZR, Stainless Steel, Version A

  MAEDLER

  General data: High resistance to corrosion.
  4 sizes.
  Ratio either 1 : 1 or 2 : 1. Any mounting position possible.
  Ratio for gearing up to max. 750 min^-1 possible.
  Housing: Stainless steel 1.4401 (V4A / AISI 316). Thick-walled, one-piece housing, fully oil-tight and dust-proof.
  Gearing: Spiral teeth, hardened.
  Shafts/bearing system: Stainless steel 1.4401 (V4A / AISI 316), ground and mounted on ball bearings. From size 2 with keyways.
  Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free.
  Angular backlash: 15 to 30 angular minutes.
  Permissable operating temperature: -18ºC to +80ºC.

  • Volume Discount

  Starting from∗ ：	627.37 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Bevel Gearboxes DZA Model H, Size 3

  MAEDLER

  General data: Gearbox with hollow shaft on the output side.
  Ratio either 1 : 1 or 2 : 1 or 3 : 1. Any mounting position possible.
  The maximum input speed (hollow shaft as input device) for gearing up is 750 min^-1 at 2 : 1 and 500 min^-1 at 3 : 1.
  Housing: Thick-walled, one-piece cast aluminium housing, fully oil-tight and dust-proof.
  Gearing: Spiral teeth, hardened.
  Shafts/bearing system: Input and output shaft are ground and mounted on ball bearings.
  Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free.
  Angular backlash: 15 to 30 angular minutes.
  Permissable operating temperature: -18ºC to +80ºC.

  • Volume Discount

  Starting from∗ ：	656.24 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Bevel Gearboxes KEK Version B

  MAEDLER

  Angular drives with high torques at very low dimensions.
  Suitable in a wide variety of applications
  8 Sizes. Ratio 1:1.
  
  Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust. Can be mounted in any position.
  Gearing: Bevel gears from steel, surface hardened.
  Bearing: Ball bearings with rubber seal RS.
  Lubrication: Maintenance free grease lubrication.
  Angular backlash: 3°+/-1°.
  Operating time: 20% at 5 min.
  Life time: 1,000 hours at max. performance at speed 500 min^-1 and operating time 20%.
  Permissable operating temperature: -20° to +60°C.
  
  * Not according to DIN 6885.

  • Volume Discount

  Starting from∗ ：	168.91 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

Loading...