KAMEDA DENKI Mounting Brackets

?* Information on days to ship and prices

• 

  Collar【50-200 Pieces Per Package】

  KAMEDA DENKI

  An auxiliary collar for tightening U fixtures.
  
  [Features]
  - A high-strength spacer for equipment mounting/installation.

  Starting from∗ ：	30.78 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Free Rail (Long Hole)

  KAMEDA DENKI

  A DIN standard compliant 35mm-width rail. (long hole)
  
  [Features]
  - Made of aluminum for light weight, ease of handling, and a nice finish.
  - Cutting is easy; no need to perform anti-rust treatment on the cut ends.
  - Any part compatible with JIS and DIN-standard rails can be mounted, regardless of manufacturer.
  - Parts and terminal blocks can be freely installed on and removed from any position on the rail, letting it accommodate design changes and added circuits.
  - Even parts which are not DIN rail compatible can be mounted using an attachment bracket such as an NF base

  2D CAD data available

  Starting from∗ ：	5.57 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Mini Bracket, Auxiliary Bracket【10 Pieces Per Package】

  KAMEDA DENKI

  This auxiliary bracket is convenient for mounting wiring ducts and small components.
  
  [Features]
  · Can be flexibly used for the support of wiring and small components.
  · Grove conformation with series of holes allows for flexible positioning.
  · The product can be further bent for compatibility with hard-to-mount areas.

  Starting from∗ ：	6.68 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Pipe Clamp

  KAMEDA DENKI

  Open board frame pipe fitting.
  
  [Features]
  · Made from steel plate, so it is lightweight and unbreakable.
  · Has a chrome plated finish and requires no painting.
  · Comes with a set U bolt for convenience.

  Starting from∗ ：	13.93 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Mini brackets, mount brackets for terminal blocks S【10-50 Pieces Per Package】

  KAMEDA DENKI

  Auxiliary brackets allow the terminal block to be mounted at an angle.

  • Volume Discount

  2D CAD data available

  Starting from∗ ：	8.34 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Mini-Quick Connector / Mount【50 Pieces Per Package】

  KAMEDA DENKI

  A supporting clasp useful for wiring ducts and small parts.
  
  [Features]
  · Convenient adjustment of height and dimensions.
  · Use push-mount ties with KS-14 for easy wiring

  Starting from∗ ：	52.77 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  L type bracket L40 one hole type

  KAMEDA DENKI

  An L-bracket for supporting piping.

  Starting from∗ ：	10.66 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  U Canada【1-20 Pieces Per Package】

  KAMEDA DENKI

  In addition to the switchboard’s construction material, it contains U-type channels that allow for electrical projects, etc.

  • Volume Discount

  Starting from∗ ：	14.47 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Bar Holder BHX

  KAMEDA DENKI

  Inserted into low-pressure bus bars for support.
  
  [Features]
  · Capable of a broad range of copper band support, from 8 mm to 20 mm.
  · The width of the groups between face A and face B differs, so please use the group that matches the plate thickness of the copper band.
  · Insulation bolts are included, so please choose a product number based on the width of the copper band.

  Starting from∗ ：	9.98 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Multi-channel, KC Type【1-20 Pieces Per Package】

  KAMEDA DENKI

  Perforated C type channel with unlimited applications, including electrical work, piping, air-conditioning work, and switchboards.
  
  [Features]
  · Perforated C type channel with unlimited applications, including electrical work, piping, air-conditioning work, and switchboards.

  • Volume Discount

  Starting from∗ ：	26.49 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Protective cover stay　S19【10 Pieces Per Package】

  KAMEDA DENKI

  A support tool to attach DIN rail relay and other protective terminal covers.
  
  [Features]
  ・Jointly fasten terminal block stopping tools to more easily attach protective covers.
  ・Please use the stopping tool for each terminal block market product.
  ・Two varieties: 20 mm and 35 mm height.

  2D CAD data available

  Starting from∗ ：	24.09 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Mini-Clasp, Strut Clasp【20 Pieces Per Package】

  KAMEDA DENKI

  A clasp with adjustable height designed for panel doors and devices.
  
  [Features]
  · Easily adjustable with just a screwdriver.
  · Can be adjusted and fine-tuned after attaching it to a device

  Starting from∗ ：	60.77 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Minikanagu mounting fitting, S【10 Pieces Per Package】

  KAMEDA DENKI

  This product is an auxiliary metal fitting for mounting terminal blocks etc.
  
  [Features]
  ・A mounting hole has now been added, making it easier to use.

  2D CAD data available

  Starting from∗ ：	13.80 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Uni-Clasp【1-10 Pieces Per Package】

  KAMEDA DENKI

  Multi-angle U connection clasp.
  
  [Features]
  · Very useful for putting clasps together in various positions. UN-26 coupler series works with the U-1 and U-26; the UN-38 series works with the U-38 and L-40, and the UN-40 series works with the L-40.
  · The UN-26 series includes parts with attractive nickel plating, making them useful support clasps for interior furniture as well

  Starting from∗ ：	5.63 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  L-Type Bracket , L40 Two-Hole Type

  KAMEDA DENKI

  An L-type bracket with holes on both ends.
  
  [Features]
  · Connecting holes included for all mounting types.
  · Lightweight and easily handled.
  · Pre-manufactured for to reduce costs and delivery times.
  · Made of hygienic, rust-resistant stainless steel.
  · Screw holes included for easy attachment to a wooden base

  • Volume Discount

  Starting from∗ ：	10.61 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Quick Strut, Hinge Side

  KAMEDA DENKI

  A hinge-side strut for supporting and opening/closing the inside doors of panel boards.
  
  [Features]
  · Both hinge type and fixed type are available.
  ▪ Supports 5 types of distribution boards of varying depths.
  · Lightweight while retaining adequate strength.
  · The center door can be removed by removing the hinge pin

  Starting from∗ ：	9.68 €
  Min. Shipping Days ：	11 Days

  *Unit price with basic configuration

• 

  Quick Strut, Hinge Receiver Side

  KAMEDA DENKI

  A receiver-side strut for supporting and opening/closing the inside doors of panel boards.
  
  [Features]
  · Both hinge type and fixed type are available.
  ▪ Supports 5 types of distribution boards of varying depths.
  · Lightweight while retaining adequate strength.
  · The center door can be removed by removing the hinge pin

  Starting from∗ ：	9.29 €
  Min. Shipping Days ：	11 Days

  *Unit price with basic configuration

• 

  Quick Strut, Fixed Type

  KAMEDA DENKI

  A fixed strut strut for supporting the inside doors of panel boards.
  
  [Features]
  · Both hinge type and fixed type are available.
  ▪ Supports 5 types of distribution boards of varying depths.
  · Lightweight while retaining adequate strength.
  · The center door can be removed by removing the hinge pin

  Starting from∗ ：	10.38 €
  Min. Shipping Days ：	11 Days

  *Unit price with basic configuration

• 

  Bar Holder, BHS

  KAMEDA DENKI

  A holder for screwing in low-voltage bus bars.
  
  [Features]
  · Freely adjustable bus bar interval widths for supporting each bus bar vertically.
  · Stays in place with a single bolt; compatible with a wide range of copper-band dimensions.
  · Made of polypropylene reinforced with glass fiber, providing ample strength

  Starting from∗ ：	6.19 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Flat bar

  KAMEDA DENKI

  This is a flat bar with holes, with limitless applications in electrical work, piping, air conditioning work, wiring boards, etc.

  • Volume Discount

  Starting from∗ ：	21.37 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Reinforced Free Rail, Multifunctional-Type

  KAMEDA DENKI

  A reinforced, multifunctional DIN rail with a useful center nut.
  
  [Features]
  · Component can be attached to the rail center by inserting a free nut* on the inside.
  *Use the NS square nut for DA-301 and 302. N2 and N0 types can also be used.
  · Components that are not DIN rail-compatible can be mounted on this rail. .
  · DIN rail type of terminal block and compact terminal block (Higashizawa RT series or Kasuga TR series) can be mounted on the same rail.
  · By using the AC or NF bases, all types of components can be mounted.
  · Strong torsion resistance due to the unique form which does not shake even when used in long lengths.
  · Heavy-duty parts can also be mounted stably.
  · A simple design where the mounting hole pitch of 25 mm fits the duct hole pitch of 50 mm.

  Starting from∗ ：	11.42 €
  Min. Shipping Days ：	13 Days

  *Unit price with basic configuration

• 

  Multi-angle Z type

  KAMEDA DENKI

  This is a Z-type angle with limitless applications in electrical work, air conditioning work, wiring boards etc.

  • Volume Discount

  Starting from∗ ：	140.74 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Quick holder, KH【10 Pieces Per Package】

  KAMEDA DENKI

  A bracket for mounting wiring and other things by gripping it at an angle.
  
  [Features]
  - Bracket is fixed with one screw, minimizing the work required to form holes.
  - With the KH-65 and KH-100, the wiring can be directly fixed in place using a zip tie.
  - Brackets with insulation coating also available.

  Starting from∗ ：	20.87 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Mini Fitting - Switch Mounting Platform S-14【1-10 Pieces Per Package】

  KAMEDA DENKI

  Fitting for mounting switches and knobs.
  
  [Features]
  S-14Z is a Z-type for easy retrofitting.
  S-14F can be mounted onto free rail (DIN rail) at any location.

  Starting from∗ ：	4.11 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Mini Bracket, Switch Mount, ZK【10 Pieces Per Package】

  KAMEDA DENKI

  The ZK series of brackets is used to mount switches and volume controls.
  
  [Features]
  - A total of five different switch mounting hole sizes are provided: 9 φ, 13 φ, 22 φ, 25 φ, and 30 φ, providing compatibility with all switches and volume controls.
  - Each size supports both one mounting point and two mounting points; multiple mounting points of three or more are also supported by combining multiple instances of the above.
  - The switch mounting surface is wide, making mounting of nameplates easy.
  - For the 9 φ and 13 φ versions, there is a single small hole at the 0° and 90° positions for locking, so both vertical and horizontal uses are supported.

  2D CAD data available

  Starting from∗ ：	29.04 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  MINI Canada duct mount【10 Pieces Per Package】

  KAMEDA DENKI

  A tool for mounting a control panel rear door wiring duct.
  
  [Features]
  ・Inserting a metal bracket into the pilot lamp or operation switch to secure the duct avoids the need to place stud bolts.
  ・3 varieties for use with 22φ, 25φ, and 30φ.

  2D CAD data available

  Starting from∗ ：	18.80 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Mini Bracket, Connection / Mounting【10 Pieces Per Package】

  KAMEDA DENKI

  This is an auxiliary bracket for the mounting, connection, etc. of ducting, wiring, or small components.
  
  [Features]
  · All brackets include tap holes for component mounting, so there is no need for the use of nuts (excluding S-5).
  · S-11 and S-11B are used when directly connecting U-1 or U-26 (the S-11B includes a 9Φ hole rather than a tap hole).
  · The S-20-25 and S-20-32 are sturdy right-angle connection brackets. They can be used for anchoring heavy objects.

  Starting from∗ ：	9.31 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Triangle Bracket

  KAMEDA DENKI

  This is a triangular bracket for piping support.
  
  [Features]
  · This is a bracket which is used to support wall surface piping.
  · The stay is welded and is sturdier than L type brackets.
  · Both sides are the same length, so it can be used facing either up, down, left or right.

  Starting from∗ ：	33.46 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Wire Holding Clasp

  KAMEDA DENKI

  A clasp for affixing high-voltage lines to epoxy insulators.
  
  [Features]
  - For wiring high-voltage switchboards, high-voltage support insulators, isolators, and shutoff switches.
  - Manufactured following the JIS standard for resin formation technology (JISC3851) for stable quality.
  - Smaller, lighter, more shock resistant, and provides better electrical and mechanical properties than traditional porcelain insulators.
  - EP-O wire clasp sold separately.

  Starting from∗ ：	3.69 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

Loading...