HALDER Workpiece clamps (horizontal clamping direction)
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Lateral Spring Plungers, with spring steel sheet
HALDER
To be used for positioning and applying pressure.- 3D CAD data available
Starting from∗ ： 16.47 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Sub-Part Clamp
HALDER
The sub-part clamp and the sub-part stop enable workpieces to be clamped on the front face. This allows the full area of the machine table to be used to clamp the workpiece.- down-hold effect through an angled jaw face- clamping of large workpieces on the whole of the machine table- large clamping forces of up to 20 kN- solid version made of vibration-eliminating ductile iron- optimal adaption to the workpiece and material through the use of clamping inserts and interchangeable jaws- force closure is possible with a fixed slot tenon EH 23110. in a T-slot- minimum interference of clamping areas - even for large workpieces- location holes at the sides for fastening of longitudinal stops if required- 3D CAD data available
Starting from∗ ： 335.24 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
- Promotional pricing
Taper Clamping Units
HALDER
Inserting the socket head screw moves the two clamping chucks outwards and presses the workpieces against a stop. Using the double taper, an additional vertical clamping force will be achieved. Stroke of taper clamping units with M 5 = ±0,5, M 8 = ±0,5, M 12 = ±1 and M 16 = ±1,5. Can be mounted in a threaded hole or with T-nuts for horizontal or vertical multiple clamping.- 3D CAD data available
Starting from∗ ： 44.20 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Push Plungers, with pin, protected against rotating
HALDER
The push plunger is suitable for easy and safe positioning of workpieces or components prior to clamping or assembly.Locating pins of your own profile or design can be attached to our threaded pin types.- 3D CAD data available
Starting from∗ ： 27.31 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Double Edge Clamps
HALDER
Inserting the socket head screw moves the two clamping chucks outwards and presses the workpiece against a stop.- 3D CAD data available
Starting from∗ ： 28.77 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Stabilizing Clamping Jaws
HALDER
Due to the big clamping jaw, this clamping element is suitable for lateral clamping of high workpieces.The clamping force acts forwards and downwards. Clamping plate is turnable, i.e. to the ground or ribbed side.- 3D CAD data available
Starting from∗ ： 331.07 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Double Edge Clamps, machinable chucks
HALDER
Inserting the socket head screw moves the two clamping chucks outwards and presses the workpiece against a stop.The chucks can be machined to the needed workpiece contour. The locking plate is needed only for this machining, not for the workpiece clamping.- 3D CAD data available
Starting from∗ ： 62.58 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Locating Clamps
HALDER
Suitable for a simultaneous "positioning" and "clamping" of workpieces. The locating element is a precision element which can be assembled from either side. The clamping and locating part adapted to the workpiece is screwed to the cylindrical support. Clamping and locating parts are manufactured by the user according to the individual requirements.- 3D CAD data available
Starting from∗ ： 446.14 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Clamping Vices / moveable jaw
HALDER
The clamping vice is a solid, compact clamping module with a horizontally acting clamping force and a robust mechanical spindle.- clamping force up to max. 80 kN- clamping stroke 25 mm via screw drive WS 36- fixture via 4 cap screws M 24, quality 8.8 (tightening torque 600 Nm) with a hole spacing 100 x 100 mm- suitable clamping jaws 23231.0020 - .0033 are available- 3D CAD data available
Starting from∗ ： 1,277.99 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Standard Jaws, for vices
HALDER
[Specifications]
・Type: Side Push
・Material: Steel, Tool Steel
・Plunger: Heat-treated steel, induction hardened- 3D CAD data available
Starting from∗ ： 106.76 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Interchangeable Jaws, for vices, with pull-down effect
HALDER
The interchangeable jaws - held by 2 permanent magnets - can be inserted and exchanged with a manual handle.- 3D CAD data available
Starting from∗ ： 246.26 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Starting from∗ ： 23.37 € Min. Shipping Days ： 2 Days *Unit price with basic configuration
-
Anti-Turn Locking Devices for Taper Clamping Units, for clamping bars
HALDER
Both versions prevent turning of the taper clamping unit on the clamping bar. The version "picture 2" additionally protects against damage from scales of wood and dirt.
Starting from∗ ： 52.36 € Min. Shipping Days ： 1 Day *Unit price with basic configuration
-
Stop Plates for Taper Clamping Units, for clamping bars
HALDER
The stop plate is used when clamping only on one side of the taper clamping unit. One side of the taper clamping unit rests against the step of the stop plate and is thus fixed.
Starting from∗ ： 154.40 € Min. Shipping Days ： 1 Day *Unit price with basic configuration
-
Stops
HALDER
With the stop a flexible stop for a workpiece can be realised.
Together with a grub screw (e.g. EH 22540.), a workpiece can be mounted and aligned.
The grub screw should be secured in position with a hexagon nut.
Suitable for clamping devices M 20 - M 24.
Starting from∗ ： 225.38 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days ： |
| Max. Clamping Force(N) |
| Material |
| Type |
| Type |
| Applicable Tightening Force(N) |
| Stroke S(mm) |
| Attaching Portion Shape |
| Arm Height Type |
| Arm Height H(mm) |
| Arm Length Type |
| Arm Length L(mm) |
| Tip Bolt Type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER |
| Product Series | Anti-Turn Locking Devices for Taper Clamping Units, for clamping bars | ||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
| ||||
| Starting from∗ | 16.47 € *Unit price with basic configuration | 335.24 € *Unit price with basic configuration | 44.20 € Special price *Unit price with basic configuration Promotional pricing | 27.31 € Special price *Unit price with basic configuration Promotional pricing | 28.77 € *Unit price with basic configuration | 331.07 € *Unit price with basic configuration | 62.58 € *Unit price with basic configuration | 446.14 € *Unit price with basic configuration | 1,277.99 € *Unit price with basic configuration | 106.76 € *Unit price with basic configuration | 246.26 € *Unit price with basic configuration | 23.37 € *Unit price with basic configuration | 52.36 € *Unit price with basic configuration | 154.40 € *Unit price with basic configuration | 225.38 € *Unit price with basic configuration |
| Min. Shipping Days ： | Same day | 3 Days | Same day | Same day | 3 Days | 4 Days | 3 Days | 4 Days | 3 Days | 3 Days | 3 Days | 2 Days | 1 Day | 1 Day | 3 Days |
| Max. Clamping Force(N) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Material | Steel | Steel | Steel | Steel | Aluminum Alloy | Steel | Aluminum Alloy | Steel | Steel | Steel | Steel | - | Steel | Steel | Steel |
| Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Type | Side Push | Side Push | Side Push | Side Push | Side Push | Side Push | Side Push | Side Push | Side Push | Side Push | Side Push | - | - | - | - |
| Applicable Tightening Force(N) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Stroke S(mm) | 1.5 | - | - | 6 ～ 10 | - | - | - | - | - | - | - | - | - | - | 65 |
| Attaching Portion Shape | Flange Base | - | Straight Base | Straight Base | Straight Base | Straight Base | Straight Base | Straight Base | - | - | - | - | - | - | - |
| Arm Height Type | - | - | - | - | - | - | - | Standard | - | - | - | - | - | - | - |
| Arm Height H(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Arm Length Type | - | - | - | - | - | - | - | Standard | - | - | - | - | - | - | - |
| Arm Length L(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Tip Bolt Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Stock
-
- Stock Items Included
Narrow search by specifying spec./dim.
-
Max. Clamping Force(N)
- Up to 100
- 100 to 1000
- 1000 to 3000
- 3000 or More
-
Material
- Steel
- Stainless Steel
- Aluminum Alloy
- MC Nylon
- Zinc Alloy
-
Type
- Main Body
- Optional Components
-
Type
-
Applicable Tightening Force(N)
-
Stroke S(mm)
-
Attaching Portion Shape
-
Arm Height Type
-
Arm Height H(mm)
-
Arm Length Type
-
Arm Length L(mm)
-
Tip Bolt Type
- Not Provided
Narrow search by specifying Brand
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Workpiece clamps (horizontal clamping direction)
Fizetési mód
Átutalás
Előre fizetés
Igény szerinti gyártás
Tanúsítványok
Copyright © MISUMI Corporation Minden jog fenntartva.