GANTER Clamping Knobs

?* Information on days to ship and prices

• • Promotional pricing

  

  Star knobs, plastic, threaded bolt Stainless Steel

  GANTER

  Star knobs GN 6336.5 comply with DIN 6336 type L.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	1.32 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Quick release star knobs, Plastic

  GANTER

  Quick release star knobs GN 6336.3 are used in such applications where the knob has to be completely removed after the releasing operation and refitted rapidly for re-clamping.
  The knob is tilted over the threaded spindle. When in position, the knob is brought into a straight position for meshing of the two threads on nut and spindle. The knob will then have to be turned only by fraction of a rotation to achieve clamping.
  Functional safety exists only if the clamping surface lies at a right angle to the threaded bolt.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	6.28 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Knurled screws, Stainless Steel

  GANTER

  All Stainless Steel-Knurled screws DIN 464 are machined from solid bar.
  Unlike in the official standard sheet, they are generally made with thread right up to the head and without recess groove at the end of the thread.

  • Volume Discount

  Starting from∗ ：	2.68 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Star knobs with movable thrust pad

  GANTER

  Star knobs GN 6336.12 have a ball pin whose diameter is smaller than the core diameter of the thread.
  The movable thrust pad is easily clipped on and taken off.
  The thrust pads are supplied unmounted.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	3.08 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Star Knobs with Loss Protection / GN 6336.13

  GANTER

  Star knobs GN 6336.13 can be captive-attached to a base element with the help of a ball chain or a retaining cable.
  The star knobs are supplied ready assembled (with retaining ring and ball chain or retaining cable).

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	4.56 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Knurled screws, Steel / Stainless Steel

  GANTER

  Knurled screws DIN 464 are machined from solid bar.
  Unlike in the official standard sheet, they are generally made with thread right up to the head and without recess groove at the end of the thread.
  The official standard sheet also provides for the sizes M1 / M1,2 / M1,6 / M2 and M2,5.

  • Volume Discount

  Starting from∗ ：	1.10 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Stainless Steel-Star knobs with threaded bolt AISI 304

  GANTER

  The original ELESA design with 5 recess grips is typical for GN 5334 star knobs.
  This form gives these grips an appealing look and additionally allows a high torque to be achieved.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	11.94 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Star knobs with pivot

  GANTER

  Star knobs GN 6336.10 with brass or plastic thrust pad are used when indentations or damage is to be avoided.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	2.70 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Waist shaped knobs, Steel

  GANTER

  Waist shaped knobs GN 75 boast a compact and timeless design.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	3.62 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Quick release toggle nuts

  GANTER

  Quick release toggle nuts GN 6305.1 are used in such applications where the knob has to be completely removed after the releasing operation and refitted rapidly for re-clamping.
  Plug the toggle nut onto the threaded bolt at an oblique angle. During the clamping action, it engages into the threads of the bolt.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	19.20 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Star knobs, plastic, with threaded bolt steel

  GANTER

  Star knobs GN 6336.4 comply with DIN 6336 type L.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	0.76 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Tommy screws, with movable bar

  GANTER

  The thrust point of these screws DIN 6306 is designed to be used with or without the thrust pad for clamping.
  The snap ring is a simple and quick method to connect the thrust pad to the tommy screw.
  Instead of DIN 6311 a thrust pad GN 6311.1 can be used. In that case the tommy screw and the thrust pad have to be ordered separately.
  The movable bar of the tommy screw DIN 6306 is held in any position by the pressure spring.
  The end caps are pressed on to the bar and thus limit the bar travel, they can also be supplied separately should the bar be plated first.The official DIN standard sheets provides for steel rings at this point.
  

  • Volume Discount

  Starting from∗ ：	18.00 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Stainless Steel-Hand knobs, casting only

  GANTER

  • Volume Discount

  Starting from∗ ：	14.82 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Flat Knurled screws, Stainless Steel

  GANTER

  All Stainless Steel-Flat knurled screws DIN 653 are produced from one piece and threaded over its full length.

  • Volume Discount

  Starting from∗ ：	2.48 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Hand knobs, Aluminum with Stainless Steel-Threaded bolt

  GANTER

  Hand knobs, Aluminum with Stainless Steel-Threaded bolt

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	13.52 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Stainless Steel-Knurled screws with recessed stud for loss prevention

  GANTER

  Stainless Steel-Knurled screws GN 653.2 can be used for to prevent loss of the thumb screw, due to the d4 recessed portion of the stud.
  When using, instead of a typical tapped and bore hole, it is necessary to provide tapped bores with a thread d1 on each of the two elements to be assembled. Additionally, a clearance bore of d5 on one or both sides must be cut.
  Depending on the design and required clamping length a1 ... a3 of the component being attached, there are a number of assembly options as shown above.
  

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	5.22 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Star knobs with loss protection

  GANTER

  Star knobs GN 6336.13 can be captive-attached to a base element with the help of a ball chain or a retaining cable.
  The star knobs are supplied ready assembled (with retaining ring and ball chain or retaining cable).

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	6.30 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Star knobs with stainless steel insert

  GANTER

  Star knobs with stainless steel insert

  • Volume Discount

  Starting from∗ ：	2.10 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Star knobs, Aluminum

  GANTER

  Star knobs GN 5336 are forged, therefore a close grain structure is maintained providing a high tensile strength and a smooth surface.
  Original ELESA design, now produced in metal in agreement with ELESA s.p.a.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	6.76 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Star knobs, Aluminum with Stainless Steel-Threaded bolt

  GANTER

  Star knobs, Aluminum with Stainless Steel-Threaded bolt

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	13.52 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Torque Limiting Knob Screws / GN 3663

  GANTER

  Torque limiting knob screws GN 3663 are used when the manually applied torque is to be limited.
  When turned clockwise, the torque mechanical system of the knurled knob triggers an „over-engagement“ as soon as the specified torque is reached. When turning anti-clockwise, the mechanical system locks such that the torque is not limited. When tightening, this will ensure that the maximum permissible torque is not exceeded. On the other hand, the torque necessary for releasing will always be transferred reliably.
  After removing the cover and loosening the countersunk screw, the thread or bore insert can be dismantled.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	58.58 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Waist shaped Stainless Steel-Knobs, Hygienic Design (GN 75.6)

  GANTER

  GN 75.6 waist shaped Stainless Steel-Knobs are intended for use in hygiene areas. The sealed mounting surface enables mounting without dead spaces; the impervious geometry in combination with the high quality finish prevents the accumulation of dirt and facilitates cleaning.
  
  GN 75.6 waist shaped Stainless Steel-Knobs have a compact and timeless design.

  • Volume Discount

  Starting from∗ ：	19.98 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Knurled screws with recessed stud for loss prevention

  GANTER

  Knurled screws GN 653.2 can be used for to prevent loss of the thumb screw, due to the d4 recessed portion of the stud.
  When using, instead of a typical tapped and bore hole, it is necessary to provide tapped bores with a thread d1 on each of the two elements to be assembled. Additionally, a clearance bore of d5 on one or both sides must be cut.
  Depending on the design and required clamping length a1 ... a3 of the component being attached, there are a number of assembly options as shown above.
  

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	2.12 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Quick release star knobs, Plastic, bushing, Stainless Steel

  GANTER

  Quick release star knobs GN 6336.3 are used in such applications where the knob has to be completely removed after the releasing operation and refitted rapidly for re-clamping.
  The knob is tilted over the threaded spindle. When in position, the knob is brought into a straight position for meshing of the two threads on nut and spindle. The knob will then have to be turned only by fraction of a rotation to achieve clamping.
  Functional safety exists only if the clamping surface lies at a right angle to the threaded bolt.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	10.08 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Stainless Steel-Flat knurled screws with brass / plastic pivot

  GANTER

  Stainless Steel-Flat knurled screws GN 653.10 with pivot in brass or plastic are used in applications, where marks and damages on the workpiece are unacceptable.
  The head dimensions comply with flat knurled thumb screws DIN 653.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	6.44 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Star knobs, Plastic

  GANTER

  Star knobs DIN 6336 with bore H7 are available under code GN 6336.1 and GN 6336.2.

  • Volume Discount

  Starting from∗ ：	0.90 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Waist shaped Stainless Steel-Knobs

  GANTER

  Waist shaped knobs GN 75.5 boast a compact and timeless design.
  They are made of high-grade stainless steel which makes them the first choice when it comes to applications requiring high standards of hygiene. The favourably designed and non-scooped geomtery helps to prevent damp and the related risk of dirt collecting.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	9.28 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Torque Limiting Knobs / GN 3663

  GANTER

  Torque limiting knobs GN 3663 are used when the manually applied torque is to be limited.
  When turned clockwise, the torque mechanical system of the knurled knob triggers an „over-engagement“ as soon as the specified torque is reached. When turning anti-clockwise, the mechanical system locks such that the torque is not limited. When tightening, this will ensure that the maximum permissible torque is not exceeded. On the other hand, the torque necessary for releasing will always be transferred reliably.
  After removing the cover and loosening the countersunk screw, the thread or bore insert can be dismantled.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	58.48 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Control knobs, Stainless Steel

  GANTER

  Control knobs, Stainless Steel

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	18.32 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Flat knurled screws, Steel

  GANTER

  All flat knurled screws DIN 653 are produced from one piece and threaded over ist full length.

  • Volume Discount

  Starting from∗ ：	1.12 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Hand knobs, Aluminum

  GANTER

  Hand knobs, Aluminum

  • Volume Discount

  Starting from∗ ：	7.36 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Hand knobs, Duroplast, with protruding steel bushing

  GANTER

  Hand knobs GN 6335.1 with protruding steel bushing have important advantages:
  The face of the bushing is exactly square to the bore and is with the complete diameter out of steel. The protruding steel bushing allows a perfect cross-dowels connection.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	2.22 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Hand knobs, Plastic

  GANTER

  Hand knobs DIN 6335 with bore H7 are available as GN 6335.1.

  • Volume Discount

  Starting from∗ ：	0.80 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Hand knobs, Plastic, protruding steel bushing, threaded bolt

  GANTER

  The hand knobs GN 6335.4 have an immaculate contact or clamping surface thanks to the protruding steel bushing.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	2.22 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Hand knobs, Technopolymer, with protruding Stainless Steel bushing

  GANTER

  Hand knobs GN 6335.2 with protruding Stainless Steel bushing have important advantages:
  The face of the bushing is exactly square to the bore and is with the complete diameter out of Stainless Steel. The protruding Stainless Steel bushing allows a perfect cross-dowels connection.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	3.42 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Knurled nuts, Stainless steel

  GANTER

  The knurling of the Stainless steel-Knurled nuts GN 536 allows a use in an environment with hygienic requirements.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	9.90 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Stainless Steel-Star knobs AISI 304

  GANTER

  The original ELESA design with 5 recess grips is typical for GN 5334 star knobs.
  This form gives these grips an appealing look and additionally allows a high torque to be achieved.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	11.44 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Stainless Steel-Star knobs with threaded bolt AISI 316L (A4)

  GANTER

  The original ELESA design with 5 recess grips is typical for GN 5334 star knobs.
  This form gives these grips an appealing look and additionally allows a high torque to be achieved.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	15.44 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Stainless Steel-Star knobs, highly polished

  GANTER

  Stainless Steel-Star knobs GN 5335 are a special development intended for the food processing machinery industry. The smooth and enclosed areas as well as the large corner radii comply with the requirements of hygiene standards.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	26.16 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Stainless Steel-Wing nuts

  GANTER

  Stainless Steel-Wing nuts

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	5.72 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Star knobs, cast, iron, with steel threaded bolt steel

  GANTER

  Star knobs, cast, iron, with steel threaded bolt steel

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	8.66 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Star knobs, Duroplast

  GANTER

  Star knobs GN 6336.1 with bushing have important advantages:
  The face of the bushing is exactly square to the bore and is with the complete diameter out of steel. The protruding steel bushing allows a perfect cross-dowels connection.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	2.00 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Star knobs, Stainless Steel

  GANTER

  Star knobs, Stainless Steel

  • Volume Discount

  Starting from∗ ：	10.12 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Star knobs, Technopolymer, with protruding Stainless Steel bushing

  GANTER

  Star knobs GN 6336.2 with all Stainless Steel bushing (main dimensions of DIN 6336) have important advantages:
  The face of the bushing is exactly square to the bore and is with the complete diameter out of Stainless Steel. The protruding Stainless Steel bushing allows a perfect cross-dowels connection.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	2.80 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Torque limiting knobs

  GANTER

  • Volume Discount

  Starting from∗ ：	40.50 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

Loading...