GANTER Indexing Plungers（Page 2）

Narrow search by specifying Type

Standard Knob
Lever Type
With Side Flange
With Ring
With Vertical Flange
Related Components
W/o Knob
Special Knobs

Data to be displayed: 30; 45; 60

Sort by:

?* Information on days to ship and prices

Stainless Steel-Spring latches for welding / GN 722.1

GANTER

Stainless Steel-Spring latches GN 722.1 are used when the indexing pin is temporarily not allowed to protrude. The indexing pin retracts by turning the latch by 180°. A lock notch will hold the latch in both positions.
The square bar allows the latch to be welded in any desired position. To prevent excessive heating up and the resulting change in the spring properties, fixing with welding spots is recommended.
Stainless Steel-Spring latches GN 722.1 are designed for use in steel construction or in locksmith shops where less precise positioning / locking is normally required. The dimensional tolerances are therefore chosen to ensure that functional safety is guaranteed under dirt exposure and that cost-effetive production methods are used.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	28.38 €
Min. Shipping Days ：	12 Days

*Unit price with basic configuration

Stainless Steel-Spring latches for welding / GN 722.1 / TypeA , AU

GANTER

[Specifications]
・Type: A. Latch riveted. not removable, AU. Latch screwed. removable
・Material: A4. Stainless Steel precision casting

With spring latches GN 722.1, the plunger pin is retracted over the curve of the guide by a 180° turn of the latch. The notch at the upper end of the curve causes the latch to be held in place if the plunger pin needs to be kept temporarily from protruding.The ST version is designed for applications in steel construction, whereas the A4 stainless steel version is suitable for use in particularly aggressive environments.

Volume Discount

Starting from^∗ ：	24.86 €
Min. Shipping Days ：	12 Days

*Unit price with basic configuration

Promotional pricing

Cam action indexing plungers with flange / SW, black, textured finish

GANTER

Cam action indexing plungers GN 612.10 are used in cases where the plunger must not protrude all the time. By rotating the lever through 180° the plunger withdraws itself. The notch allows safe positioning.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	10.12 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Cam action indexing plungers, Plunger pin protruded

GANTER

Cam action indexing plungers GN 712 are used in such applications where the plunger pin must not protrude continually. When turning the cam by 90° resp.120° degrees in anti-clockwise direction, the plunger pin is moved through a curved opening in the body. After that, the plunger pin is retracted.
Depending on the type, the plunger pin is moved back by a spring in its original position (Type A), is held in retracted position (Type R), resp. is secured against accidental operation (Type S).
In order to move the plunger pin, safety version Type S requires an additional lifting of the latch.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	24.32 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Cam action indexing plungers, Zinc die casting

GANTER

Cam action indexing plungers GN 612.8 are used in cases where the locking pin must not protrude all the time. By rotating the lock through 180° the locking pin withdraws itself. The notch allows safe positioning.
These cam action indexing plungers made of die-cast zinc are very reasonably priced design versions.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	7.80 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Indexing plungers with rest position, Steel / Plastic knob

GANTER

Indexing plungers GN 617.1 with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted.
A notch keeps the plunger in this position.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	10.48 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Promotional pricing

Indexing plungers without thread, Steel / Plastic knob

GANTER

Indexing plungers GN 618 without thread are for applications where welding, resin bonding (Loctite) or clamping is favoured.
Type G has been designed for applications where the indexing plunger is not operated with the standard knob.
The indexing plungers are designed such that the plunger set in the end position (spring is "on block") can also absorb axial forces. For applications in which these forces are substantially above the tensile force applied by the operator (Type G), additional information can be submitted on request.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	8.66 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Indexing plungers, Plunger Stainless Steel

GANTER

Stainless Steel-Indexing plungers GN 608.5 are distinguished for their small dimensions.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	11.56 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Indexing plungers, Plunger Steel

GANTER

Indexing plungers GN 608 are distinguished for their small dimensions.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	8.62 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Indexing plungers, Steel / Plastic-knob / with rest position

GANTER

Indexing plungers GN 607.1 with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.
Indexing plungers GN 607.1 are distinguished for their small dimensions. The extremely low Stainless Steel-Lock nuts GN 909 enlarge the mounting options. The locking tab is an integral part of the knob thus giving reliable operation at all times.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	13.62 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Indexing plungers, with rest position, Plunger Stainless Steel

GANTER

Indexing plungers GN 608.6 with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.
Indexing plungers GN 608.6 are distinguished for their small dimensions. The locking tab is integrated into the knob thus giving reliable operation at all times.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	11.80 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Key for locking plungers / 816-10

GANTER

For locking plungers GN 816 with operation with key (Type B / BK) this key is required to move the plunger. Locking plungers Ø 6 and 8 have the same key GN 816-10.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	7.70 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Promotional pricing

Locking plungers, Plunger protruded

GANTER

If not operated, the plunger of the locking plungers GN 816 protrudes. To retract, move against the spring force and hold in the end position by turning by 90°.
The shape of the cam curve secures the plunger against accidental operation.
When operating the button (Type AR / ARK), the visible red covering sleeve indicates the locking status: Indexing pin does not protrude.
For the execution with operation with key (Type B / BK) a key is required to move the plunger. In this execution, a cover sleeve provides additional security and safety from unauthorized removal of the locking plunger. The cover sleeve also provides additional protection against malfunction caused by dirt.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	19.58 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Stainless Steel-Indexing plungers with long plastic knob

GANTER

Stainless Steel-Indexing plungers GN 817.2 correspond to GN 817, they only differ by a longer knob.
Type C / CK are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	14.28 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Stainless Steel-Mini indexing plungers, with and without rest position

GANTER

Stainless Steel-Mini indexing plungers GN 822.9 are distinguished for their small dimensions. They are mounted by countersunk screws.
The Stainless Steel-Mini indexing plungers present an affordable alternative to the GN 608.5 and GN 608.6 Stainless Steel-Indexing plungers.
In types C and CN, the button can be turned by 30° after retracting the indexing pin, holding it in the "retraced" position using the indexing lock.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	14.38 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Indexing plungers, flange surface mounting, right-angled the plunger

GANTER

[Specifications]
・Type: A. with pull ring

With indexing plungers GN 722.5, the plunger pin is actuated via the pull ring. This is done either manually, with a cable or by means of an extended pull rod with hook. The ZB and SW versions are designed for applications in steel construction, whereas the A4 stainless steel version is suitable for use in particularly aggressive environments.

Volume Discount

Starting from^∗ ：	20.60 €
Min. Shipping Days ：	12 Days

*Unit price with basic configuration

Stainless Steel-Indexing plungers with red knob / GN 8170

GANTER

[Specifications]
・Type: B. without rest position, C. with rest position
・Material (Sealing ring): H. H-NBR

Stainless steel indexing plungers GN 8170 are intended for use in hygienic areas and meet hygiene requirements on the knob side (front hygiene). Wipers between the knob and the guide as well as the sealing ring between the guide and the housing keep the locking mechanism on the knob side leak-tight. At the same time, the high surface quality (Ra < 0,8 um) and dead-space-free mounting prevent dirt from adhering and facilitate cleaning.

Volume Discount

Starting from^∗ ：	84.62 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Cam action indexing plungers for welding

GANTER

Cam action indexing plungers GN 612.3 are used in cases where the locking pin must not protrude all the time. By rotating the lock through 180° the locking pin withdraws itself. A notch keeps the plunger in this position.
The square body can therefore be welded in any required position. In order to prevent a change in the spring load by the transferred heat we recommend spot welding the plunger body.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	20.90 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Clamping indexing plungers with safety function

GANTER

Clamping indexing GN 7336.8 plungers are an advanced development of the GN 7336.7 clamping knobs with indexing plunger.
Like the latter, they are used for positioning, securing and clamping adjusting elements at the same time. This configuration ensures that the indexing pin cannot be pulled from the indexing bore by turning the knurled knob, but only be deliberately pulling the handle (safety function).

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	26.18 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Promotional pricing

Clamping knobs with indexing plunger

GANTER

Clamping knobs with indexing plunger GN 7336.7 are used for positioning, securing and clamping adjusting elements at the same time.
The axial movement of the handle (pulling) pulls the indexing pin from the engaged position against the spring force, with the star know at the same time remaining connected with form-lock to the clamping screw via a hexagonal element, allowing both clamping and releasing.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	8.56 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Double ring spanner

GANTER

[Specifications]
・Type: 607.9

Indexing plungers GN 607.2 have been developed for installation in thin walled equipment.

Volume Discount

Starting from^∗ ：	3.16 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Promotional pricing

Indexing plungers for thin walled equipment

GANTER

Indexing plungers GN 607.2 have been developed for installation in thin walled equipment.
It has to be taken into consideration that, depending on the mounting plate thickness 's', the protruding plunger length 'l1' and the position of the hexagon nut on its centre bush, the plunger nose might not always be fully retractable.
For design reasons the positional accuracy of this indexing plunger is not as precise as plunger GN 607.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	17.36 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Indexing plungers for welding, with rest position

GANTER

Indexing plungers GN 607.5 with rest position are used in cases where the indexing pin is temporarily not allowed to protrude. After pulling out, the knob is turned by 90°.

A notch keeps the plunger in this position.

The GN 607.5 indexing plungers are intended for welded fixing, in particular for use in steel square tubings.

The lug d2 is intended for positioning.

The plastic knob with the in-moulded indexing pin is driven on after the welding process.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	15.66 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Promotional pricing

Indexing plungers for welding, without rest position

GANTER

Indexing plungers GN 607.4 are designed for welded fixing, in particular for use in steel square tubings.
The lug d2 is intended for positioning.
The plastic knob with the in-moulded indexing pin is driven on after the welding process.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	14.96 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Indexing plungers with rest position, for thin walled equipment

GANTER

Indexing plungers GN 607.3 have been developed for installation in thin walled equipment.
It has to be taken into consideration that, depending on the mounting plate thickness 's', the protruding plunger length 'l1' and the position of the hexagon nut on its centre bush, the plunger nose might not always be fully retractable.
For design reasons the positional accuracy of this indexing plunger is not as precise as plunger GN 607.
Indexing plungers with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	20.32 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Promotional pricing

Indexing plungers, plunger conical

GANTER

Indexing plungers GN 817.5 allow highly accurate positioning, with the guidance made by the positioning bushings DIN 172 / DIN 179 with cylindrical bore. The actual indexing bore is fitted with positioning bushings GN 172.1 / GN 179.1 with conical bores.
The conical shape of the indexing pin / the indexing bore makes the positioning virtually clearance-free and therefore highly precise.
Type C is used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	35.32 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Indexing plungers, Stainless Steel / plastic knob

GANTER

Type G or GK of the indexing plungers GN 613 have been designed for applications where the indexing plunger is not operated with the standard knob.
The indexing plungers are designed such that the plunger set in the end position (spring is "on block") can also absorb axial forces. For applications in which these forces are substantially above the tensile force applied by the operator (Type G), GN 817 indexing plungers are to be preferred.
A special screw driver GN 613.1 is available. Two slots are provided in the upper end of the body which are accessible with the knob in its retracted position.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	11.28 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Promotional pricing

Indexing plungers, Stainless Steel / Plastic-knob / with rest position

GANTER

Stainless Steel-Indexing plungers GN 607.1 with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.
Stainless Steel-Indexing plungers GN 607.1 are distinguished for their small dimensions. The extremely low Stainless Steel-Lock nuts GN 909.5 enlarge the mounting options. The locking tab is an integral part of the knob thus giving reliable operation at all times.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	23.32 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Indexing plungers, Stainless Steel / Plastic-knob / without rest position

GANTER

Stainless Steel-Indexing plungers GN 607 are distinguished for their small dimensions.
The extremely low Stainless Steel-Lock nuts GN 909.5 enlarge the mounting options.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	15.32 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Indexing plungers, Steel / long Plastic-knob

GANTER

Indexing plungers GN 817.2 correspond to GN 817, they only differ by a longer knob.
Type C / CK are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	9.70 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Indexing plungers, Steel / plastic knob

GANTER

Type G or GK of the GN 613 indexing plungers have been designed for applications where the indexing plunger is not operated with the standard knob.
The indexing plungers are designed such that the plunger set in the end position (spring is "on block") can also absorb axial forces. For applications in which these forces are substantially above the tensile force applied by the operator (Type G), GN 817 indexing plungers are to be preferred.
A special screw driver GN 613.1 is available. Two slots are provided in the upper end of the body which are accessible with the knob in its retracted position.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	7.60 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Promotional pricing

Indexing plungers, Steel / Plastic-knob / without rest position

GANTER

Indexing plungers GN 607 are distinguished for their small dimensions.
The extremely low lock nuts GN 909 enlarge the mounting options.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	10.46 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Indexing plungers, Steel / Plastic-knob / with or without rest position

GANTER

Indexing plungers GN 817.1 (Type C) are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	10.42 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Key for locking plungers / 816.1-10

GANTER

For locking plungers GN 816.1 with operation with key (Type B / BK) this key is required to move the plunger. Locking plungers Ø 6 and 8 have the same key GN 816.1-10.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	1.72 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Locking plungers, Plunger retracted

GANTER

If not operated, the plunger of the locking plungers GN 816.1 is retracted. To move out, move against the spring force and hold in the end position by turning by 90°.
The shape of the cam curve secures the plunger against accidental operation.
When operating the button (Type AR / ARK), the visible red covering sleeve indicates the locking status: Indexing pin does not protrude.
For the execution with operation with key (Type B / BK) a key is required to move the plunger. In this execution, a cover sleeve provides additional security and safety from unauthorized removal of the locking plunger. The cover sleeve also provides additional protection against malfunction caused by dirt.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	19.92 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Screw drivers for GN 613

GANTER

[Specifications]
・Type: 613.1

Type G or GK of the GN 613 indexing plungers have been designed for applications where the indexing plunger is not operated with the standard knob. The indexing plungers are designed such that the plunger set in the end position (spring is „on block“) can also absorb axial forces. For applications in which these forces are substantially above the tensile force applied by the operator (Type G), GN 817 indexing plungers are to be preferred.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	10.32 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Promotional pricing

Spring bolts, Stainless Steel / Plastic knob

GANTER

The plunger of the Stainless Steel-Spring bolts GN 313 does not protrude in the inoperative position.
It can be operated manually or in Type D and DK mechanically (pneumatic cylinder, cam plate, etc.) when it will protrude only as long as it is operated.
Using the internal thread at identification 2 on the pressure side, special pressure bolts or a rod arrangement can be operated, for instance.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	13.50 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Stainless Steel-Cam action indexing plungers for welding

GANTER

Stainless Steel-Cam action indexing plungers GN 612.3 are used in cases where the locking pin must not protrude all the time. By rotating the lock through 180° the locking pin withdraws itself. A notch keeps the plunger in this position.
The square body can therefore be welded in any required position. In order to prevent a change in the spring load by the transferred heat we recommend spot welding the plunger body.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	25.90 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Promotional pricing

Stainless Steel-Cam action indexing plungers, without locking function

GANTER

For GN 721.5 Stainless Steel-Cam action indexing plungers the indexing plunger pin is withdrawn by turning the lock by 180°.
When the cam action indexing plungers are positioned symmetrically, the left or right handed types allow for a practical, i.e. equal, direction setting of the lock.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	22.20 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Stainless Steel-Indexing plungers / without rest position / GN 613

GANTER

The indexing plungers GN 613 are designed such that the plunger set in the end position (spring is "on block") can also absorb axial forces. For applications in which these forces are substantially above the tensile force applied by the operator, GN 817 indexing plungers are to be preferred.
A special screw driver GN 613.1 is available. Two slots are provided in the upper end of the body which are accessible with the knob in its retracted position.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	18.78 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Promotional pricing

Stainless Steel-Indexing plungers / with lever, with and without rest position / GN 7017

GANTER

GN 7017 Stainless Steel-Indexing plungers are activated through a lever and are characterized by small dimensions. These indexing plungers are universally applicable due to their prevention of misalignments and positioning errors of the mating indexing bores.
The type C / CK with rest position are used for such applications where the plunger has to stay in its retracted position.
During assembly, the max. tightening torques shown in the table should not be exceeded when securing the lock nut.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	8.72 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Stainless Steel-Indexing plungers, Knob pin side Hygienic Design (full hygie

GANTER

[Specifications]
・Type: B. without rest position, C. with rest position
・Material: ST. Steel precision casting

Stainless steel indexing plungers GN 8170 are intended for use in hygienic areas, and with their additional sealing nuts, they meet hygiene requirements on the knob and pin sides (complete hygiene). Wipers between knob and guide and between guide and pin as well as sealing rings on the guide and sealing nut keep the locking mechanism leak-tight. At the same time, the high surface quality (Ra < 0,8 um) and dead-space-free mounting prevent dirt from adhering and facilitate cleaning.

Volume Discount

Starting from^∗ ：	111.60 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Stainless Steel-Indexing plungers for welding, removable / GN 722.4

GANTER

[Specifications]
・Type: A. with pull ring, A. with pull ring. mounted, AU. with pull ring. unmounted
・Material: A4. Stainless Steel precision casting

With indexing plungers GN 722.4, the plunger pin is actuated via the pull ring. This is done either manually, with a cable or by means of an extended pull rod with hook. The ST version is designed for applications in steel construction, whereas the A4 stainless steel version is suitable for use in particularly aggressive environments.

Volume Discount

Starting from^∗ ：	26.48 €
Min. Shipping Days ：	12 Days

*Unit price with basic configuration


Brand
Product Series
CAD
Starting from^∗
Min. Shipping Days ：
Type
Locking Mechanism
Mounting Method
Overall Length
Body Material
All Stainless
Tip Material
Body O.D./Thread M(mm)
Stroke S(mm)
Tip Surface Treatment
Tip Heat Treatment
Tip O.D. d(Ø)
Length L(mm)

			Promotional pricing				Promotional pricing	Promotional pricing	Promotional pricing	Promotional pricing			Promotional pricing	Promotional pricing	Promotional pricing					Promotional pricing		Promotional pricing		Promotional pricing		Promotional pricing		Promotional pricing	Promotional pricing	Promotional pricing		Promotional pricing					Promotional pricing		Promotional pricing		Promotional pricing
Brand	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER
Product Series	Stainless Steel-Spring latches for welding / GN 722.1	Stainless Steel-Spring latches for welding / GN 722.1 / TypeA , AU	Cam action indexing plungers with flange / SW, black, textured finish	Cam action indexing plungers, Plunger pin protruded	Cam action indexing plungers, Zinc die casting	Indexing plungers with rest position, Steel / Plastic knob	Indexing plungers without thread, Steel / Plastic knob	Indexing plungers, Plunger Stainless Steel	Indexing plungers, Plunger Steel	Indexing plungers, Steel / Plastic-knob / with rest position	Indexing plungers, with rest position, Plunger Stainless Steel	Key for locking plungers / 816-10	Locking plungers, Plunger protruded	Stainless Steel-Indexing plungers with long plastic knob	Stainless Steel-Mini indexing plungers, with and without rest position	Indexing plungers, flange surface mounting, right-angled the plunger	Stainless Steel-Indexing plungers with red knob / GN 8170	Cam action indexing plungers for welding	Clamping indexing plungers with safety function	Clamping knobs with indexing plunger	Double ring spanner	Indexing plungers for thin walled equipment	Indexing plungers for welding, with rest position	Indexing plungers for welding, without rest position	Indexing plungers with rest position, for thin walled equipment	Indexing plungers, plunger conical	Indexing plungers, Stainless Steel / plastic knob	Indexing plungers, Stainless Steel / Plastic-knob / with rest position	Indexing plungers, Stainless Steel / Plastic-knob / without rest position	Indexing plungers, Steel / long Plastic-knob	Indexing plungers, Steel / plastic knob	Indexing plungers, Steel / Plastic-knob / without rest position	Indexing plungers, Steel / Plastic-knob / with or without rest position	Key for locking plungers / 816.1-10	Locking plungers, Plunger retracted	Screw drivers for GN 613	Spring bolts, Stainless Steel / Plastic knob	Stainless Steel-Cam action indexing plungers for welding	Stainless Steel-Cam action indexing plungers, without locking function	Stainless Steel-Indexing plungers / without rest position / GN 613	Stainless Steel-Indexing plungers / with lever, with and without rest position / GN 7017	Stainless Steel-Indexing plungers, Knob pin side Hygienic Design (full hygie	Stainless Steel-Indexing plungers for welding, removable / GN 722.4
CAD	2D / 3D		2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D			2D / 3D	2D / 3D	2D / 3D		2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D
Starting from^∗	28.38 € *Unit price with basic configuration Volume Discount	24.86 € *Unit price with basic configuration Volume Discount	10.12 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	24.32 € *Unit price with basic configuration Volume Discount	7.80 € *Unit price with basic configuration Volume Discount	10.48 € *Unit price with basic configuration Volume Discount	8.66 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	11.56 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	8.62 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	13.62 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	11.80 € *Unit price with basic configuration Volume Discount	7.70 € *Unit price with basic configuration Volume Discount	19.58 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	14.28 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	14.38 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	20.60 € *Unit price with basic configuration Volume Discount	84.62 € *Unit price with basic configuration Volume Discount	20.90 € *Unit price with basic configuration Volume Discount	26.18 € *Unit price with basic configuration Volume Discount	8.56 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	3.16 € *Unit price with basic configuration Volume Discount	17.36 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	15.66 € *Unit price with basic configuration Volume Discount	14.96 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	20.32 € *Unit price with basic configuration Volume Discount	35.32 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	11.28 € *Unit price with basic configuration Volume Discount	23.32 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	15.32 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	9.70 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	7.60 € *Unit price with basic configuration Volume Discount	10.46 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	10.42 € *Unit price with basic configuration Volume Discount	1.72 € *Unit price with basic configuration Volume Discount	19.92 € *Unit price with basic configuration Volume Discount	10.32 € *Unit price with basic configuration Volume Discount	13.50 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	25.90 € *Unit price with basic configuration Volume Discount	22.20 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	18.78 € *Unit price with basic configuration Volume Discount	8.72 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	111.60 € *Unit price with basic configuration Volume Discount	26.48 € *Unit price with basic configuration Volume Discount
Min. Shipping Days ：	12 Days	12 Days	Same day	7 Days	3 Days	4 Days	Same day	Same day	Same day	Same day	7 Days	7 Days	Same day	Same day	Same day	12 Days	7 Days	7 Days	7 Days	Same day	7 Days	Same day	7 Days	Same day	7 Days	Same day	3 Days	Same day	Same day	Same day	7 Days	Same day	7 Days	7 Days	7 Days	7 Days	Same day	7 Days	Same day	7 Days	Same day	7 Days	12 Days
Type	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Locking Mechanism	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Mounting Method	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Overall Length	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Body Material	Stainless Steel	-	-	-	-	-	-	-	-	Steel	-	-	-	Stainless Steel	-	-	-	-	-	-	-	Steel	Steel	Steel	Steel	-	Stainless Steel	Stainless Steel	Stainless Steel	-	-	Steel	-	-	-	-	-	Stainless Steel	-	Stainless Steel	Stainless Steel	-	-
All Stainless	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Tip Material	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Body O.D./Thread M(mm)	-	-	16 ～ 20	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Stroke S(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Tip Surface Treatment	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Tip Heat Treatment	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Tip O.D. d(Ø)	-	-	6 ～ 12	6 ～ 10	4 ～ 12	5 ～ 10	5 ～ 8	6 ～ 8	6 ～ 8	6 ～ 8	6 ～ 8	-	6 ～ 10	4 ～ 12	4 ～ 10	-	-	-	-	-	-	6 ～ 8	6 ～ 8	6 ～ 8	6 ～ 8	6 ～ 10	5 ～ 10	6 ～ 8	6 ～ 8	4 ～ 12	5 ～ 10	6 ～ 8	6 ～ 10	-	6 ～ 8	-	5 ～ 10	-	5 ～ 10	5 ～ 10	4 ～ 10	-	-
Length L(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Filter by:

Stock

- Stock Items Included
Clear

Narrow search by specifying spec./dim.

Locking Mechanism
- Not Provided
- With Locking Nose
- Without Locking Nose
Images

Clear

Mounting Method
- Screw-In
- Press Fit
- Bolt Mounting
- Others
- Flange
Clear

Overall Length
- Standard
- Short
Clear

Body Material
- Steel
- Stainless Steel
- Zinc Die Cast
- Polyamide
- Others
Clear

All Stainless
- Applicable
- Not Compliant
Clear

Tip Material
- Steel
- Stainless Steel
Clear

Body O.D./Thread M(mm)
3

5

6

6x0.75

8

8x1

10

M10

10x1

12

M12

12x1.5

14

14.5

16

M16

16x1.5

18

20

M20

20x1.5

22

24

24x2
Drawing

Clear

Stroke S(mm)
3.5

4

5

5-9

6

6-10

7

7.5

8

9

9.5

10

12

14

14.3

15

16

18

19

20

24

25

25.4
Drawing

Clear

Tip Surface Treatment
- Not Provided
- Black Oxide
- Trivalent Chromate
- Electroless Nickel Plating
- Nickel Plating
- Others
- Zinc Plating
Clear

Tip Heat Treatment
- Not Provided
- Hardened
- Carburized
Clear

Tip O.D. d(Ø)
2

2.5

3

4

5

6

7

7.1

8

M8 x 1

8.28

10

M10 x 1

11.52

12

M12 x 1,5

14

15.49

16

M16 x 1,5

18

19.7

20

M20 x 1,5

22

25

30

60

80
Drawing

Clear

Length L(mm)
24

25

25.5

26.5

29.5

30

30.5

31

31.5

32

33

34

34.5

35

36

37

37.5

38

38.5

39

40

40.5

41

41.5

41.7

42

42.5

43

43.5

44

44.5

45

46

46.5

47

47.5

48

49

49.5

50

50.5

51

51.7

52

52.2

52.8

53

54

54.5

54.7

55

55.5

56

56.5

56.9

57

57.25

57.5

57.7

57.8

58

58.5

59

59.5

60.4

60.5

61

61.7

62

62.9

63

63.5

64.5

65

65.1

66

67.5

68

68.5

69

70

70.5

71

72

72.5

73

74

75

75.5

76

77

78

79

80

80.5

81

82

83

84

85

86

86.5

87

89

91

92

96

98.5

99.9

102.5

102.9

104

106

106.5

110.5

114.5

123

130

134

1000

3000

5000
Drawing

Clear

Narrow search by specifying Brand

- MISUMI (19)
- Cost Efficient Products ()
- NORELEM (183)
- KIPP (142)
- GANTER (88)
- HALDER (37)
- NABEYA BI-TECH (24)
- KONISHI MFG (19)
- IMAO CORPORATION (18)
- ELESA (4)
- NABEYA (1)
- TOSHIN CASTER (1)
Clear

Narrow search by specifying CAD data type

- 2D
- 3D
Clear

Narrow search by specifying lead time

All

Same day

2 Days or Less

3 Days or Less

4 Days or Less

5 Days or Less

6 Days or Less

7 Days or Less

8 Days or Less

9 Days or Less

10 Days or Less
Clear