Pliers/Nippers/Pincers（Plier Type：Pliers）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Precision Crimper PA-09
ENGINEER
Pliers that are convenient for crimping small terminals of half-pitch connectors, etc.
[Features]
· Crimp height can be adjusted. Provides excellent visibility during crimping.
· Precision crimping of small-/medium-sized contacts is possible, at light weight and low cost.
· 4 die sizes enable terminals with pitch equivalent to 1.25 mm to 1.5 mm to be crimped.
· With thin die specifications. Uses an eco-friendly elastomer with excellent oil resistance for the grip.
· The surface of the body is finished with high-quality black oxide fluoropolymer.
· The set pin lets you easily adjust for looseness that occurs over long periods of use.
[Applications]
· Crimping work for ultra-small contact pin.- Volume Discount
- Stock
Configure nowStarting from∗ ： 70.17 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Pliers
FUJIYA
The most standard pliers which can be used for a wide range of applications, such as electrical work, woodworking and metalworking work, assembly and repair of mechanical parts, etc.
[Features]
· Serrations are provided on holding portion to prevent slipping.Configure nowStarting from∗ ： 38.52 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 69.92 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Precision Crimping Pliers (Die Exchange Type)
ENGINEER
Crimping pliers capable of handling more than 300 types of terminals with 3 interchangeable dies.
[Features]
· Crimped with high-precision die, for amazingly fine finish.
· Can be replaced with separately sold die to handle more terminals.
· Equipped with a replaceable-type die, it is convenient to carry.
· With wire stripper and cutter (PAD-11, PAD-12, PAD-13).
· Can be mounted on the PAD-11, 12, 13 main units (PAD-11S, PAD-12S, PAD-13S).
[Applications]
· Ideal for crimping of various terminals in electrical work, trial manufacture of electronic equipment, etc.- Volume Discount
Configure nowStarting from∗ ： 42.86 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
(Merry Mark) JIS Combination Pliers, Knurling, Highest Grade Special Steel
MUROMOTO TEKKO
[Features]
Standard pliers made from special steel for outstanding durability.
Knurl processed and can rotate nuts etc.- Volume Discount
Configure nowStarting from∗ ： 37.77 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 43.81 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 33.69 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Neji-Saurus RX PZ-59
ENGINEER
Excellent, highly evolved pliers that include cutting, turning and grasping in accordance with professional expectations.
[Features]
· Thin due to the new technology "gear teeth".
· By adopting a T type grip, weight reduction has been achieved while remaining strong and providing higher torsional resistance.
· By optimizing the vertical tooth angle (internationally patented), the screw head can be securely grasped with a frictional force that is higher than ever.
· Compared to conventional products, the force engaging the screw is improved greatly, so it is possible to turn the screws steadily with less power.
· The unique tip shape (internationally patented) enables firm grip and rotation, even on truss screws with a recessed head.
[Applications]
· Usable for removing screws with stripped heads and rusty screws.- Volume Discount
- Stock
Configure nowStarting from∗ ： 43.87 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
- Promotional pricing
Electrician's F-Pliers DF-195 / DF-220
THREE PEAKS GIKEN
Pliers capable of making clean cuts in VVF wire.
[Features]
· With their long, sharp blades, they can completely enclose VVF wire to make an easy cut with a clean-cut edge.
· A part at the back of the blades can cut up to 2 mm iron wire (indicated in the product).
· The gap at the tip of the jaws has been kept to as small as possible, so they can reliably grab thin objects.
· The handles have an elastomer resin grip that fits the hand comfortably.
· They will not harm the environment even if they are burned.
· Hole included in the grip for attaching a fall-prevention strap.
[Applications]
· Perfect for electrical-related work (air-conditioning wiring, etc.).- Volume Discount
Configure nowStarting from∗ ： 27.90 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Configure now
Starting from∗ ： 28.82 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 28.12 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 43.06 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 35.00 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 58.62 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Precision Crimper PA-20
ENGINEER
Pliers that are convenient for crimping small terminals of half-pitch connectors, etc.
[Features]
· Precision crimping of small-/medium-sized contacts is possible, at light weight and low cost.
· 4 die sizes enable terminals with pitch equivalent to 2.5 mm to 5 mm to be crimped.
· With thin die specifications. Uses an eco-friendly elastomer for the grip. Boasts excellent oil resistance.
· The surface of the body is finished with high-quality black oxide fluoropolymer.
[Applications]
· Ideal for crimping extremely small, thin-walled pins.- Volume Discount
Configure nowStarting from∗ ： 72.44 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Electrician's Pliers PD-06 – 08
ENGINEER
Excellent electrical pliers boasting outstanding cutting force and durability.
[Features]
· It is a soft grip which fits well in the hand.
[Applications]
· Electrical work, metalworking, assembly and repair of machine components, etc.- Volume Discount
Configure nowStarting from∗ ： 25.91 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 41.44 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
(Merry Mark) JIS Combination Pliers Knurling
MUROMOTO TEKKO
[Features]
- Gripping portion is appropriately treated with a non-slip agent.
Knurl processed and can rotate nuts etc.- Volume Discount
Configure nowStarting from∗ ： 34.17 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
(Merry) Heavy-Duty Pliers
MUROMOTO TEKKO
[Features]
Pliers with shorter tip than regular pliers for heavy duty cutting. (That make use of the principle of levers)
Gripping portion is appropriately treated with a non-slip agent.
Knurl processed and can rotate nuts etc.
[Applications]
-Electrical work.- Volume Discount
Configure nowStarting from∗ ： 45.52 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
(Merry) Lightweight Slim Pliers
MUROMOTO TEKKO
[Features]
· It has excellent cutting ability because the fulcrum from the tip is shorter than ordinary pliers. (With eccentric lever principle)
· Light, slim, and durable.
· As the cutting edge is polished with a diamond wheel, it is superior in cutting.- Volume Discount
Configure nowStarting from∗ ： 54.22 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
(Merry) Crimping Pliers (with Crimp Function)
MUROMOTO TEKKO
[Features]
Gripping portion is appropriately treated with a non-slip agent.
Knurl processed and can rotate nuts etc.
- Peeling and press fitting are possible with this product.- Volume Discount
Configure nowStarting from∗ ： 46.89 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Merry Heavy-Duty Crimp Combination Pliers (With Crimping Function 1.25 to 2 mm2) With Stripping Hole
MUROMOTO TEKKO
[Features]
· The blade is long and can cut VA wire(φ2.6, 3 cores) in one stroke.
· Just as with 2050 (Heavy Duty Pliers), the eccentric lever principle provides excellent cutting performance.
· The product can be used for terminal crimping. Further, it also has a wire stripping hole.- Volume Discount
Configure nowStarting from∗ ： 53.92 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Mary Heavy-Duty Crimping Combination Pliers (1.25 to 2 mm2 With Crimp Function)
MUROMOTO TEKKO
[Features]
· The blade is long and can cut VA wire(φ2.6, 3 cores) in one stroke.
· Just as with 2050 (Heavy Duty Pliers), the eccentric lever principle provides excellent cutting performance.
· The product can be used for terminal crimping.- Volume Discount
Configure nowStarting from∗ ： 53.97 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
(Merry) Pliers for Electrical Work
MUROMOTO TEKKO
[Features]
· Uses a uniquely shaped elastomer cover.
· Strong type pliers (with eccentric lever principle).- Volume Discount
Configure nowStarting from∗ ： 42.02 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Lightweight Pliers
THREE PEAKS GIKEN
[Features]
· Lightweight pliers to prevent fatigue even after long hours of work.
· Long blade for cutting VVF (3 cores) wire in a single action.
· Elastomer resin grip that comfortably fits the hand.- Volume Discount
Configure nowStarting from∗ ： 44.80 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 27.33 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Pliers with Crimper, Hole Type
FUJIYA
Equipped with a crimping function at the base of the grip, these pliers can easily crimp a terminal 1.25-5.5 mm in size. With Hole- Volume Discount
Configure nowStarting from∗ ： 46.50 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Standard Pliers 1800-175/1800-200
FUJIYA
General-use model of pliers.
[Features]
· Can cut up to ø2.6 (diameter 2.6 mm) VA/VVF wire × 3 cores.
· Made of a special high-performance steel with a unique heat treatment, they have superior durability.
· Using the principles of eccentricity and leverage allow the pliers to cut easily.
· 'The jaws have a serrated shape to keep the item being held from slipping.
· The grip has a built-in hole for attaching fall prevention rope.
[Applications]
· Can be used for applications ranging from electrical work, engineering, construction and machine assembly and repair to general household DIY.- Volume Discount
Configure nowStarting from∗ ： 51.81 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Pliers With Crimper 1150B-175
FUJIYA
Pliers with crimping functionality.
[Features]
· Features a crimping feature at the base of the grip.
· Allows you to easily perform crimping on crimp terminals from 1.25 to 5.5 mm.
· The jaws are serrated, so they resist slipping.
· With a built-in fall prevention hole, they can be safely used when working at height.
[Applications]
· For work involving cutting, grasping, bending and twisting iron and copper wire.- Volume Discount
Configure nowStarting from∗ ： 46.50 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
High-Power Pliers (With Crimping Function) 1700-175 / 1700-200
FUJIYA
Pliers with crimping functionality.
[Features]
· Can also cut VA/VVF wires, and can cut up to ø2.6 (diameter 2.6 mm) × 3 cores.
· Made of a special high-performance steel with a unique heat treatment, they have superior durability.
· Using the principles of eccentricity and leverage allow the pliers to cut easily.
· The jaws have a serrated shape to prevent the item being held from slipping.
· The included crimping function is useful and easy to use at the job site, and the crimp terminal connection range is 1.25/2/5.5 mm2.
[Applications]
· Perfect for cutting wires and uncomplicated crimping, such as for indoor and outdoor wiring construction, electrical facilities construction, etc.- Volume Discount
Configure nowStarting from∗ ： 55.84 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Electrician's Power Pliers (With Crimping Function) 3000Z-225
FUJIYA
The cover on the handles has a double-layer structure for pliers with better performance.
[Features]
· Excellent cutting ability and durability because they're made of a special proprietary steel.
· With blades longer than conventional pliers and a hexagon-shaped hole on the back part of the pliers, they can even cut VA wire that is 2.6 × 3 cores.
· The jaws have a serrated shape to prevent the item in the jaws from slipping.
· The grip has a built-in hole for attaching fall prevention rope.
· The grip makes use of a composite resin cover with a double-layer structure as a safety feature.
· An easy-to-use crimping function is also built-in, and the crimp terminal connection range is 2.0 to 5.5 mm².
[Applications]
· Perfect for working on electrical equipment, etc., such as for indoor and outdoor wiring construction.- Volume Discount
Configure nowStarting from∗ ： 60.05 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Electrician's Pliers (With Crimping Function) 3300-225
FUJIYA
Pliers with crimping function.
[Features]
· Increased cutting power thanks to cutting-edge polishing technology called a "micro mirror blade."
· The blades are long, and the back part of the blade has a hexagonal shape.
· Can easily cut up to VA/VVF wire 2.6 mm × 3 cores.
· Safe for use in work at height because they're fitted with a fall-prevention hole.
[Applications]
· Can be used in a broad range of fields, such as indoor and outdoor wiring construction, electrical equipment, telecommunications construction, engineering construction, DIY, etc.- Volume Discount
Configure nowStarting from∗ ： 81.90 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Electrician's Pliers H-Grade 1050Z-175 / 1050Z-200
FUJIYA
Pliers featuring a composite resin cover.
[Features]
· The cover on the handles (the grip) has a double-layer structure for better performance.
· If the blue resin cover becomes worn, scratched or cracked, it exposes the yellow layer underneath. This double-layer system acts as a warning.
· Excellent cutting ability and durability because they're made of a special proprietary steel.
· The jaws have a serrated shape to prevent the item being held from slipping.
· The grip has a built-in hole for attaching fall prevention rope, so they can be safely used when working at height.
[Applications]
· Perfect for working on electrical equipment, etc., such as for indoor and outdoor wiring construction.- Volume Discount
Configure nowStarting from∗ ： 48.66 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 16.32 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 9.03 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Craft Laser Case Set, Brown Laser
IGARASHI PLIERS
It contains tools for scoops such as micro combination pliers, micro wire cutters and precision tweezers, and is made of leather so it can be used for a long time.- Volume Discount
Configure nowStarting from∗ ： 103.47 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Stripper Blade PA-30
ENGINEER
Equipped with a stopper that can freely adjust the strip length between 2 and 20 mm.
[Features]
· Just by holding the grip, a flat cable with a width of 12 mm or less can be easily stripped in a single action.
· Solid wires from AWG20 to 10 can be stripped.
* The core may be disconnected when stripping wires with a thin insulating coating (such as fluoropolymer wire).- Volume Discount
Configure nowStarting from∗ ： 37.32 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Wire Stripper (for Ultra Fine Wire, Thin Wire, Thick Wire)
ENGINEER
A high-performance stripping unit with excellent sharpness and wear resistance.
[Features]
· Utilizes precision polishing finishing and achieves a shape that is extremely close to a perfect circle.
· Maintains outstanding sharpness without damaging the core wire.
· The stripping hole is designed to fit both stranded wires and solid wires.
· High-carbon steel body for excellent resistance to wear.
· Boasts excellent oil resistance.
· Uses an eco-friendly elastomer design for the grip.
[Applications]
· Optimal for stripping stranded and single wires.- Volume Discount
Configure nowStarting from∗ ： 43.79 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Round Pliers PM-06
ENGINEER
Optimal for the bending of wires, wire casting, and coiling
[Features]
· Round-nose tip.
[Applications]
· Optimal for the bending of wires, wire casting, and coiling.- Volume Discount
Configure nowStarting from∗ ： 30.11 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Precision Crimper PA-21
ENGINEER
Pliers capable of crimping 100 or more kinds of terminals into the desired shape.
[Features]
· Inexpensive and light-weight.
· Crimp height can be adjusted when crimping. Provides excellent visibility during crimping to reduce errors.
· Compatible with a wide variety of terminals since core barrels and coated wire barrels are crimped separately.
· It adopts a new die shape and also supports the long terminal of a spring (barrel).
· The die is precision finished. The grip boasts excellent oil resistance, and uses environmentally-friendly elastomer.
[Applications]
· 4 dies enable AWG26 to 18 compliant terminals to be crimped.
· Optimal for ultra-small connector crimping.- Volume Discount
Configure nowStarting from∗ ： 79.04 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Heavy Duty Pliers 0205
KNIPEX
[Features]
· The gripping surface has a shape that supports plates and pipes, allowing it to be used in a wide range of applications.
· The side cutter can cut soft wire, hard wire, and piano wire.
· Hardness of the cutter which has been carefully quenched is approximately HRC 64.
· Oil tempered and quenched high quality special tool steel is used for the material.
· Head finish: Chrome plated.
· Handle Specification: Comfort- Volume Discount
Configure nowStarting from∗ ： 114.18 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Pliers for Electrical Engineer
KNIPEX
[Features]
· These are perfect pliers for all kinds of work related to cables.
· For gripping and bending wires.
· Head finish: Polished.- Volume Discount
Configure nowStarting from∗ ： 122.50 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
End Sleeve Crimping Pliers 9771
KNIPEX
[Features]
· For crimping 0.25 to 16 mm2 end sleeves compliant with article 1 or article 4 of DIN46228.
· Trapezoidal crimping part crimps sleeve and conductor according to the noted size.
· Crimped part supports 8 sizes.
· Oil tempered and quenched special tool steel is used for the material.
· Compatible terminal: End sleeve.
· Head finish: Polished.
· Handle specification: Plastic coating.- Volume Discount
Configure nowStarting from∗ ： 113.74 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Crimper Pliers 9752-04 / 9752-05 / 9752-06 / 9752-08 / 9752-09 / 9752-10 / 9752-13 / 9752-19 / 9752-23
KNIPEX
Jaw replacement cannot be performed.
[Features]
· Next generation crimping pliers that adopt a design that maximizes the effect of the principle of leverage.
· For crimping work with terminals, etc., that do not require soldering.
· It can crimp with 30% less force than the conventional crimp pliers.
· Head finish: Black finish.
· Handle specification: Plastic coating.Configure nowStarting from∗ ： 255.78 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Crimp Combination Pliers, 9752-50
KNIPEX
For crimping work with terminals, etc., that do not require soldering.- Volume Discount
Configure nowStarting from∗ ： 227.79 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days |
| Specifications |
| Product Category |
| Plier Type |
| Plier Type |
| Nipper Type |
| Overall Length(mm) |
| Shaft/hole |
| With or without Spring |
| Steel Wire Cutting Performance(φ/mm) |
| Copper Wire Cutting Performance(φ/mm) |
| Piano Wire Cutting Performance(φ/mm) |
| Plastic Cutting Performance(φ/mm) |
| Stranded Wire Cutting Ability(φ/mm) |
| Stainless steel cutting ability(φ/mm) |
| VA (VVF) Wire Cutting Capacity(φ/mm) |
| With/without tip claw replacement function |
| Tip claw diameter(mm) |
| Compatible Ring Size(mm) |
| Parts Type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | ENGINEER | FUJIYA | KTC(KYOTO TOOL) | ENGINEER | MUROMOTO TEKKO | KTC(KYOTO TOOL) | TRUSCO NAKAYAMA | ENGINEER | THREE PEAKS GIKEN | HOZAN | MAEDAKINNZOKU | HOZAN | HOZAN | MAEDAKINNZOKU | ENGINEER | ENGINEER | HANAZONO TOOL | MUROMOTO TEKKO | MUROMOTO TEKKO | MUROMOTO TEKKO | MUROMOTO TEKKO | MUROMOTO TEKKO | MUROMOTO TEKKO | MUROMOTO TEKKO | THREE PEAKS GIKEN | TRUSCO NAKAYAMA | FUJIYA | FUJIYA | FUJIYA | FUJIYA | FUJIYA | FUJIYA | FUJIYA | SK 11 | M & M | IGARASHI PLIERS | ENGINEER | ENGINEER | ENGINEER | ENGINEER | KNIPEX | KNIPEX | KNIPEX | KNIPEX | KNIPEX |
| Product Series | (Merry Mark) JIS Combination Pliers, Knurling, Highest Grade Special Steel | Merry Heavy-Duty Crimp Combination Pliers (With Crimping Function 1.25 to 2 mm2) With Stripping Hole | Mary Heavy-Duty Crimping Combination Pliers (1.25 to 2 mm2 With Crimp Function) | High-Power Pliers (With Crimping Function) 1700-175 / 1700-200 | Electrician's Power Pliers (With Crimping Function) 3000Z-225 | ||||||||||||||||||||||||||||||||||||||||
| Starting from∗ | 70.17 € *Unit price with basic configuration Volume Discount | 38.52 € *Unit price with basic configuration | 69.92 € *Unit price with basic configuration Volume Discount | 42.86 € *Unit price with basic configuration Volume Discount | 37.77 € *Unit price with basic configuration Volume Discount | 43.81 € *Unit price with basic configuration Volume Discount | 33.69 € *Unit price with basic configuration Volume Discount | 43.87 € *Unit price with basic configuration Volume Discount | 27.90 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 28.82 € *Unit price with basic configuration Volume Discount | 28.12 € *Unit price with basic configuration Volume Discount | 43.06 € *Unit price with basic configuration Volume Discount | 35.00 € *Unit price with basic configuration Volume Discount | 58.62 € *Unit price with basic configuration Volume Discount | 72.44 € *Unit price with basic configuration Volume Discount | 25.91 € *Unit price with basic configuration Volume Discount | 41.44 € *Unit price with basic configuration Volume Discount | 34.17 € *Unit price with basic configuration Volume Discount | 45.52 € *Unit price with basic configuration Volume Discount | 54.22 € *Unit price with basic configuration Volume Discount | 46.89 € *Unit price with basic configuration Volume Discount | 53.92 € *Unit price with basic configuration Volume Discount | 53.97 € *Unit price with basic configuration Volume Discount | 42.02 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 44.80 € *Unit price with basic configuration Volume Discount | 27.33 € *Unit price with basic configuration Volume Discount | 46.50 € *Unit price with basic configuration Volume Discount | 51.81 € *Unit price with basic configuration Volume Discount | 46.50 € *Unit price with basic configuration Volume Discount | 55.84 € *Unit price with basic configuration Volume Discount | 60.05 € *Unit price with basic configuration Volume Discount | 81.90 € *Unit price with basic configuration Volume Discount | 48.66 € *Unit price with basic configuration Volume Discount | 16.32 € *Unit price with basic configuration Volume Discount | 9.03 € *Unit price with basic configuration Volume Discount | 103.47 € *Unit price with basic configuration Volume Discount | 37.32 € *Unit price with basic configuration Volume Discount | 43.79 € *Unit price with basic configuration Volume Discount | 30.11 € *Unit price with basic configuration Volume Discount | 79.04 € *Unit price with basic configuration Volume Discount | 114.18 € *Unit price with basic configuration Volume Discount | 122.50 € *Unit price with basic configuration Volume Discount | 113.74 € *Unit price with basic configuration Volume Discount | 255.78 € *Unit price with basic configuration | 227.79 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days | 5 Days | 5 Days | 6 Days | 5 Days | 6 Days | 6 Days | 9 Days | 5 Days | Same day | 7 Days | 5 Days | 6 Days | 6 Days | 9 Days | 6 Days | 5 Days | 5 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | Same day | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 5 Days | 9 Days | 7 Days | 5 Days | 6 Days | 5 Days | 6 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days |
| Specifications |
|
| |||||||||||||||||||||||||||||||||||||||||||
| Product Category | Pliers | Pliers | Pliers | Pliers / Parts | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers |
| Plier Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Plier Type | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers |
| Nipper Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Nippers | - | - | - | - | - | - | - | - | - |
| Overall Length(mm) | 175 | 160 ～ 217 | 178 | - | 175 ～ 200 | 165 ～ 190 | 160 | 204 | 223.5 | 163 ～ 188 | 164 ～ 224 | 195 ～ 220 | 118 | 170 | 175 | 165 ～ 185 | 167 ～ 217 | 150 ～ 200 | 185 ～ 225 | 210 | 185 | 200 | 200 | 200 | 214.5 | 160 ～ 186 | 192 | 202 ～ 222 | 192 | 222 | 230 | 228 | 192 ～ 217 | 150 ～ 175 | - | - | 170 | 175 | 145 | 175 | 225 | 160 | 180 | 250 | 220 |
| Shaft/hole | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| With or without Spring | Available | N/A | Available | - | Available | N/A | Available | N/A | N/A | N/A | - | N/A | Available | - | Available | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | Available | N/A | N/A | N/A | Available | N/A | N/A | N/A | N/A | N/A | - | Available | - | Available | Available | Available | Available | N/A | N/A | N/A | - | - |
| Steel Wire Cutting Performance(φ/mm) | - | 2.2 ～ 3.4 | - | - | 2.6 ～ 3.2 | 2.15 ～ 2.75 | - | 3.2 | 2 | - | 1.6 ～ 2 | - | - | 1.2 (Soft Iron Wire) | - | 1.6 ～ 1.8 | 2.2 ～ 3.5 | 2 ～ 3.2 | 3.2 ～ 3.6 | 3.6 | 2.6 | 3.2 | 3.2 | 3.6 | 3.4 | 2.2 ～ 3 | 3 | 3 ～ 3.4 | 3 | 3.4 | 3.6 | 3.6 | 3 ～ 3.4 | 2 ～ 3 | 0.8 | - | - | - | - | - | - | - | - | - | - |
| Copper Wire Cutting Performance(φ/mm) | - | 3 ～ 4 | - | - | 3.5 ～ 4 | - | - | - | 3.2 | 3.3 ～ 3.5 | - | 3.5 ～ 4 | - | 2 | - | - | 3 ～ 4 | 3 ～ 4 | 4 ～ 4.5 | 4.5 | 3.5 | 4 | 4 | 4.5 | 4 | 3 ～ 3.5 | 3.5 | 3.5 ～ 4 | 3.5 | 4 | 4 | 4 | 3.5 ～ 4 | 3 ～ 3.5 | - | - | - | - | - | - | 14 | - | - | - | - |
| Piano Wire Cutting Performance(φ/mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1.2 ～ 2 | - | - | - | - | - | - | - | - | - | - | - | - | - | 2 | 2 | - | - | - | - | - | - | - | - | 2.5 | - | - | - | - |
| Plastic Cutting Performance(φ/mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Stranded Wire Cutting Ability(φ/mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Stainless steel cutting ability(φ/mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| VA (VVF) Wire Cutting Capacity(φ/mm) | - | - | - | - | 2.0X3 core | - | - | - | 2.0 x 4 core | 1.6 x 2 core ～ 1.6 x 3 core | - | 1.6 x 3 core ～ 2.0 × 3 core | - | - | - | - | - | 1.6X3 core ～ 2.0X3 core | 2.0X3 core ～ 2.6X3 core | 2.6X3 core | 2X3 core | 2.6X3 core | 2.6X3 core | 2X3 core | 2.6X3 core | 1.6X3 core ～ 2.0X3 core | - | 2.6X3 | 2X3 | 2.6X3 | 2.6X3 | 2.6X3 | 2X3 | - | - | - | - | - | - | - | - | - | - | - | - |
| With/without tip claw replacement function | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Tip claw diameter(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Compatible Ring Size(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Parts Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Product Category
- Pliers
- Pliers
- Nippers
- Parts
-
Plier Type
- Pliers
- Retaining Ring Pliers
-
Plier Type
- Pliers
- Lead Pliers
- Longnose pliers
-
Nipper Type
- Nippers
- Heat Nippers
-
Overall Length(mm)
- 36
- 46
- 92
- 100
- 102.5
- 105
- 108
- 110
- 111.5
- 115
- 116
- 117
- 117.5
- 118
- 120
- 123
- 124
- 125
- 125.5
- 126
- 128
- 128.5
- 129
- 130
- 131
- 132
- 132.5
- 133
- 134
- 135
- 136
- 138
- 139
- 140
- 140|170|180|130
- 140|180
- 140|180|130|165
- 140|180|165
- 141
- 142
- 143
- 144
- 145
- 146
- 147
- 148
- 149
- 150
- 151
- 152
- Approx. 152
- 152.5
- 153
- 154
- 155
- 157
- 158
- 158.5
- 159
- 160
- 161
- 162
- 163
- 164
- 165
- 166
- 167
- 168
- 170
- 170|180
- 171
- 172
- 173
- 174
- 175
- 178
- 179
- 180
- 180|250
- 181
- 183
- 185
- 186
- 188
- 189
- 190
- 192
- 193
- 194
- 195
- 197
- 199
- 200
- Approx. 200
- 201.5
- 202
- 203
- 204
- 205
- 206
- 208
- 210
- 214.5
- 215
- 217
- 219
- 220
- 222
- 223
- 223.5
- 224
- 225
- 227
- 228
- 229
- 230
- 232
- 235
- 240
- 242
- 245
- 250
- 260
- 266
- 270
- 275
- Approximately 275
- 280
- 282
- 285
- Approximately 285
- 287
- 290
- 293
- 297
- 300
- 305
- 310
- 320
- 340
- 370
- 400
- 443
- 455
- 460
- 465
- 560
- 570
- 580
- 585
- 590
- 595
- 600
- 620
- 920
-
Shaft/hole
- For Shaft
- For Hole
- Use with both shaft and hole
-
With or without Spring
- Available
- N/A
-
Steel Wire Cutting Performance(φ/mm)
-
Copper Wire Cutting Performance(φ/mm)
-
Piano Wire Cutting Performance(φ/mm)
-
Plastic Cutting Performance(φ/mm)
-
Stranded Wire Cutting Ability(φ/mm)
-
Stainless steel cutting ability(φ/mm)
-
VA (VVF) Wire Cutting Capacity(φ/mm)
-
With/without tip claw replacement function
- Available
- N/A
-
Tip claw diameter(mm)
-
Compatible Ring Size(mm)
-
Parts Type
- Blade Tip
- Spring
- Grip
- Snap ring plier tip claw
Brand
-
- ENGINEER (9)
- FUJIYA (8)
- MUROMOTO TEKKO (8)
- KNIPEX (7)
- HOZAN (4)
- TSUNODA (4)
- KEIBA (3)
- HANAZONO TOOL (2)
- KTC(KYOTO TOOL) (2)
- M & M (2)
- MAEDAKINNZOKU (2)
- THREE PEAKS GIKEN (2)
- TRUSCO NAKAYAMA (2)
- IGARASHI PLIERS (1)
- MITOLOY (1)
- SMATO (1)
- SK 11 (1)
- TRAD (1)
- ANEX (0)
- WOLFCRAFT (0)
- GRIPONTOOLS (0)
- WELLER (0)
- ARC GREATTOOL (0)
- AS ONE (0)
- H & H (0)
- NEPROS (0)
- ONISHI MANUFACTURING (0)
- RITTAL (0)
- ARC (0)
- MITSUTOMO (0)
- FACOM (0)
- BERNSTEIN AG (0)
- E VALUE (0)
- SIGNET (0)
- LINDSTROM (0)
- ESCO (0)
- HAZET (0)
- GEDORE (0)
- BAHCO (0)
- WEIDMUELLER (0)
- LOBTEX (0)
- RENNSTEIG (0)
- WIHA (0)
- PHOENIX CONTACT (0)
- NWS (0)
- CIMCO (0)
CAD data type
-
- 2D
- 3D
Categories related to Pliers/Nippers/Pincers
-
- Wrenches / Offset Wrenches / Ratchet Wrenches
- Hex Wrenches
- Monkey Wrenches
- Hexalobular Wrenches
- Socket Wrenches
- Torque Wrenches
- Screwdrivers
- Torque Screwdrivers
- Pliers/Nippers/Pincers
- Hammers
- Tool Sets / Tool Boxes
- Cutter, rotary cutter, scalpel knife
- Chisels
- Screwdriver Bits
- Socket Bits
- Crowbars
- Pullers
- Tweezers, clamps, pliers
- Engravers/Punches
- Vehicle Maintenance Tools
- Tools for Water Supply Faucets and Air-Conditioning Piping
- Cutting Tools
- Insulation Tools
- Sheet Metal Tools
- Caulking Tools
- Tools Used at Electric Facilities
-
Fizetési mód
Átutalás
Előre fizetés
Igény szerinti gyártás
Tanúsítványok
Copyright © MISUMI Corporation Minden jog fenntartva.