Chamfer, V-Grooves（work material：Aluminum）

?* Information on days to ship and prices

• • Promotional pricing

  

  Carbide Chamfering Cutter KMC-2

  KYOWA SEIKO

  [Features] It can be used for chamfering and horizontal machining. [Features] By using carbide materials with high hardness, it can be used for cutting general steel, heat-treated steel, stainless steel, cast iron and aluminium.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	42.95 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 90°

  MAKOTOLOY

  [Features]
  · A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
  · The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
  · Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
  · An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.
  · Standard type.

  Select to compare

  Configure now
  Starting from∗ ：	93.69 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Carbide Mini WR Chamfer Cutter

  EIKOSHA

  Front / Back R-Chamfering

  Select to compare

  Configure now
  Starting from∗ ：	208.09 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  CMC MC Chamfering Cutter G2

  ASAHI TOOLS

  Soldering shape, Angle tolerance ±15'.
  Shape accuracy with straight edge.
  Applications, Hole chamfering/bevelling/horizontal run Work material, General steel/heat treated steel/stainless steel/cast iron/aluminium/copper/resin
  Single-edged blade
  2 blades.

  Select to compare

  Configure now
  Starting from∗ ：	113.60 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  TS coated carbide chamfer, V grooving end mill, 2-flute

  MISUMI

  [Features]
  -Ideal for chamfers and V-grooves
  -It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
  -Can be reground. Please refer to the "Regrinding Service" page for application methods, performance range, prices, delivery times, etc.

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes

  Select to compare

  Configure now
  Starting from∗ ：	71.59 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model

  MISUMI

  Ideal for the Deep Chamfering of Workpieces

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes

  Select to compare

  Configure now
  Starting from∗ ：	48.89 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  TiCN Coated Powdered High-Speed Steel Chamfering End Mill, 2-Flute, Short

  MISUMI

  The chamfer angle can be selected from 60, 90 and 120°according to the machining style

  • Volume Discount

  • TiCN
  • 2 Flutes
  • S (Short)

  Select to compare

  Configure now
  Starting from∗ ：	57.90 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  XAL Series Carbide Chamfer End Mill, 3-Flute / Short Type

  MISUMI

  [Features]
  ・Popular 3-flute type for helix angle chambering with high feed rate.
  ・Ideal for chamfering.(V-groove machining is not possible because there is no cutting edge at the tip)
  ・Since it has an outer peripheral flute, it can perform inclined contours and helical cutting.
  ・With the 3-flute shape, the feed can be increased up to 1.5 times that of the 2-flute type.
  ・Since the outer peripheral flute has a helix angle, the machining shown in the above figure is possible.
  ・It can also be used as a deburring tool.
  ・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	41.90 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  XAL Series Carbide Chamfer End Mill, 2-Flute / Short Type

  MISUMI

  [Features]
  ・Popular chamfering product with helix angle.
  ・Since it has a peripheral flute, it can be used for tilting, contouring and helical cutting.
  ・Since the outer peripheral flute has a helix angle, the machining shown in the above figure is possible. It can also be used as a deburring tool.
  ・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	37.71 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Leading Drills, TIN-NC-LDS

  OSG

  TiN Coating Makes Possible Higher Speed and Longer Life than NC-LDS

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	21.10 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Spiral Chamfering Cutter for SV Chamfering Process

  UNION TOOL

  [Features]
  · Carbide spiral chamfering cutter
  · Half Taper Angle of 45°
  · The external blade is a torsion type that limits the occurrence of burrs when compared with the straight blade type.

  Select to compare

  Configure now
  Starting from∗ ：	135.77 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Center reamer

  FUKUDA

  Reamers for center hole finishing or chamfering. Edges of odd number reduce chatter.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	30.94 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  CoroMill Plura - General Purpose Chamfering End Mill, Cylindrical Shank / Weldon Shank

  SANDVIK

  Select to compare

  Configure now
  Starting from∗ ：	116.87 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Chamfering Reamer (3-Flute) MC

  DAIICHITOOL

  [Features]
  Bevel reamers with an overall length of 55 to 95 mm and handle diameters of 8 mm, 10 mm and 12 mm.

  Select to compare

  Configure now
  Starting from∗ ：	56.40 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 60°

  MAKOTOLOY

  [Features]
  · A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
  · The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
  · Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
  · An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.
  · Standard type.

  Select to compare

  Configure now
  Starting from∗ ：	93.69 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 120°

  MAKOTOLOY

  [Features]
  · A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
  · The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
  · Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
  · An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.
  · Standard type.

  Select to compare

  Configure now
  Starting from∗ ：	93.69 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 60°

  MAKOTOLOY

  [Features]
  · A small but high quality end mill that can also be used with high precision machining technology.

  Select to compare

  Configure now
  Starting from∗ ：	104.69 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  TS coated carbide chamfering end mill, 2-flute / 15° spiral

  MISUMI

  [Features]
  -The hard-to-machine flute tip and the shape that facilitates chip evacuation allow machining from positioning ( = centering) to chamfering with a single tool
  -The coating has high oxidation resistance and high hardness and achieves long tool life. Effective in high-speed machining and dry machining as coating properties
  -Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes

  Select to compare

  Configure now
  Starting from∗ ：	42.10 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  TS coated carbide chamfering end mill, 2-flute / short model

  MISUMI

  [Features]
  -Ideal for chamfering. Can also be used as a deburring tool
  -Since it has circumferential grooves, it is possible to perform bevel, contour and oblique cutting
  -Since the circumferential grooves have a bevel angle, it is possible to machine as shown in the figure above
  -It has a coating with high oxidation resistance and high hardness, and achieves a long service life. Effective in high-speed machining and dry machining as coating properties
  -Can be reground. Please refer to the "Regrinding Service" page for how to use the product, its performance, etc.

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes
  • S (Short)

  Select to compare

  Configure now
  Starting from∗ ：	38.81 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  TS coated carbide chamfering end mill, 3-flute / short model

  MISUMI

  [Features]
  -Ideal for chamfering (V-groove is not possible as the tip has no cutting groove).
  -Peripheral grooves allow bevel, contour and spiral cutting
  -The 3-groove shape allows feed rate improvement to the 1st step. The 3-flute shape enables up to 1.5 times the feed rate compared to the 2-flute type
  -With helix angle on peripheral flutes
  -Can also be used as a deburring tool
  -It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.

  • Volume Discount

  • TS
  • General Steel
  • 3 Flutes
  • S (Short)

  Select to compare

  Configure now
  Starting from∗ ：	46.59 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  TS coated carbide inner R-cutter, 2-flute

  MISUMI

  [Features]
  Easy high-quality machining of corner radii
  -It has a coating with high oxidation resistance and high hardness and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes

  Select to compare

  Configure now
  Starting from∗ ：	50.04 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Carbide inner R-cutter, 2-flute

  MISUMI

  Achieves the easy and high-quality processing of the corner R with the extensive 20 sizes

  • Volume Discount

  • Non-Coated
  • General Steel
  • 2 Flutes

  Select to compare

  Configure now
  Starting from∗ ：	49.42 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  TS Coated Carbide Chamfering End Mill for Stainless Steel Machining, 2-Flute / No Side Blade

  MISUMI

  The helix flute suppresses the occurrence of burrs in chamfering difficult-to-cut SUS, etc.

  • Volume Discount

  • TS
  • SUS
  • 2 Flutes

  Select to compare

  Configure now
  Starting from∗ ：	74.67 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Carbide Chamfering End Mill for Aluminum Machining, 2-Flute, 30° Spiral

  MISUMI

  Capable of everything from positioning to chamfering in a single shot

  • Volume Discount

  • Non-Coated
  • Aluminum
  • 2 Flutes

  Select to compare

  Configure now
  Starting from∗ ：	40.79 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Carbide Chamfering End Mill for Aluminum Machining, 2-Flute

  MISUMI

  The sharp helix blade achieves the clean machined surface with less burr

  • Volume Discount

  • Non-Coated
  • Aluminum
  • 2 Flutes

  Select to compare

  Configure now
  Starting from∗ ：	72.54 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  High-Speed Steel Chamfering End Mill, 2-Flute / Short

  MISUMI

  Chamfering end mill with the angle that can be freely selected in 1° increments

  • Non-Coated
  • 2 Flutes
  • S (Short)

  Select to compare

  Configure now
  Min. Shipping Days ：	7 Days

• 

  XAL Series Carbide Chamfer End Mill, 2-Flute / 15° Helix Angle

  MISUMI

  [Features]
  ・Machining from positioning to chamfering with a single tool.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	42.61 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  XAL Series Carbide Chamfer End Mill 2-Flute

  MISUMI

  [Features]
  ・Recommended for chamfering general steel.
  ・Ideal for chamfering and V-groove machining.
  ・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	32.62 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  XAL Series Carbide Chamfering / V-Groove End Mill, 2-Flute / Long Shank Type

  MISUMI

  [Features]
  ・Recommended for deep section chamfering of general steel.
  ・Ideal for chamfering and V-groove machining.
  ・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.
  ・The long type is ideal for deep cavity milling.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	43.97 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  XAL Series Carbide Inner Radius Cutter, 2-Flute

  MISUMI

  [Features]
  ・An essential item for corner rounding.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	50.04 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Leading Drills, VP-LDS

  OSG

  V coating enables longer lasting life than TIN-NC-LDS

  Select to compare

  Configure now
  Starting from∗ ：	17.24 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Leading Drills, NC-LDS

  OSG

  Available tip angles are 90° (45° chamfer), 120°, and 130° (EX GOLD drill centering for slope / curved surfaces).

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	12.20 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Leading Drills, FX-LS-LDS

  OSG

  90° of tip angle with FX coating, carbide leading drill with long shank. Ideal for chamfering deep parts.

  Select to compare

  Configure now
  Starting from∗ ：	295.75 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Leading Drills, FX-LDS

  OSG

  90° of tip angle with FX coating, carbide leading drill. It enables high speed and long life.

  Select to compare

  Configure now
  Starting from∗ ：	357.80 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  2-Flute Spiral Chamfering Cutter FX-SCC

  OSG

  By adopting of sharp high helix, clean working surface with less burr can be obtained.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	88.29 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  2-Flute Spiral Chamfering Cutter (for Steel / Aluminum Alloy) CA-SCC

  OSG

  By adopting of sharp high helix, clean working surface with less burr can be obtained.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	81.19 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  2-Flute Long Shank Spiral Chamfering Cutter FX-LS-SCC

  OSG

  Long shank type suited for working deep section. Does not generate chatter even with large extruding amounts due to use of twisted blade.

  Select to compare

  Configure now
  Starting from∗ ：	84.50 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  2-Flute Long Shank Spiral Chamfering Cutter (for Steel / Aluminum) CA-LS-SCC

  OSG

  Long shank type suited for working deep section. Does not generate chatter even with large extruding amounts due to use of twisted blade.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	87.63 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  3-Flute, Chamfering Cutter (Negative Type) HSCT-N

  OSG

  End mill for negative chamfering. It suppresses chatter during machining and has good chip evacuation for a beautiful finished surface.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	73.17 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  3-Flute, Chamfering Cutter (Positive Type) HSCT-P

  OSG

  End mill for positive chamfering. It suppresses chatter during machining and has good chip evacuation for a beautiful finished surface.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	73.51 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  3-Flute Long Shank Chamfering Cutter (Negative Type) LS-HSCT-N

  OSG

  End mill for negative chamfering, long shank type. It suppresses chatter during machining and has good chip evacuation for a nice surface finish.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	78.36 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  3-Flute Long Shank Chamfering Cutter (Positive Type) LS-HSCT-P

  OSG

  Positive chamfer cutter with long shank. It suppresses chatter during machining and has good chip evacuation for a beautiful finished surface.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	78.36 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  High Speed Chamfering Series, V-Coated XPM 2-Flute Chamfering Cutters

  OSG

  By adopting of sharp high helix, clean working surface with less burr can be obtained.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	44.76 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Hole Chamfering Leading Drill V Coating Powder HSS Long Shank

  OSG

  Leading long shank drill with powder metal high speed steel XPM as base material, with 90° V-coated point angle. Ideal for chamfering deep parts.

  Select to compare

  Configure now
  Starting from∗ ：	23.64 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Chatterless Chamfer Milling Machine

  FUKUDA

  6-flute blade improves cutting force, fantastic sharpness means zero chatter, horizontal motion during face milling is possible, and the uncomfortable metallic sound during machining is drastically reduced.
  
  [Features]
  · Chamfering.
  · Drilling machines, milling machines, machining centers.
  · Horizontal Milling

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	42.97 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

Loading...