Chamfering / Centering Tools（work material：General Steel Page 7）
Search by sub-category
Centering/Countersink
Chamfer, V-Grooves
Inner R
Replaceable Blade Type Chamfering Tools/Tips/Blades
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Carbide Center Drill Noncoat KCD-90
KYOWA SEIKO
Both tip diameter and large diameter have torsional angle of 30°. Suppresses burrs and enables high-efficiency machining.Configure nowStarting from∗ ： 75.96 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Carbide Inversed Chamfering Cutter KUMC-4
KYOWA SEIKO
4 straight cutting edges.
45° (one-sided angle)
Material, general steel/heat-treated steel/stainless steel/cast iron/aluminium
Single-edged blade
Tool grade, carbideConfigure nowStarting from∗ ： 109.96 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Carbide Inversed Chamfering Cutter KUMW-4
KYOWA SEIKO
4 straight cutting edges.
90° (including angle type)
Working material, General steel/Heat treated steel/Stainless steel/Cast iron/Aluminium/Copper/Resin
Single-edged blade
Tool quality, carbide.Configure nowStarting from∗ ： 109.96 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 116.87 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 117.96 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
SPEED / T, 2-Flute, Multi 90°
SPEED TIGER
[Features]
· Blade diameters φ10 or less are high rigidity types with thick shank diameter.
· A high-lubricity AlTiN coated tool that is ideal for soft materials with a hardness of HRC 45 or less, such as raw materials or stainless steel. Handy to have one in a magazine rack.Configure nowStarting from∗ ： 42.39 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Medium Hardness Carbon Steel / Center Hole Drill for High Speed Machining MHCDS
YAMAWA MFG
- Volume Discount
Configure nowStarting from∗ ： 20.51 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Blade for Chamfer / Deburring【1-10 Pieces Per Package】
NOGAJAPAN
[Features]
One blade for chamfering and deburring.
Compatible base body: compatible holder (EL04003), compatible handle (NG3000), compatible holder (UH1000, SC1400), compatible handle (NC5100), compatible handle (NC5200).- Volume Discount
Configure nowStarting from∗ ： 31.82 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
FX-MG-CS X 90 Hole Chamfering, 3-Flute Countersink, FX Coating Carbide 90° Series
OSG
High-speed cutting is possible compared to conventional products, and a wide range of processing such as deburring and chamfering can be performed, resulting in a beautiful finished surface. High-speed steel series and carbide series are available.- Volume Discount
Configure nowStarting from∗ ： 119.56 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Chamfering Reamer (3-Flute) MC
DAIICHITOOL
[Features]
Bevel reamers with an overall length of 55 to 95 mm and handle diameters of 8 mm, 10 mm and 12 mm.Configure nowStarting from∗ ： 56.40 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Center Reamer CF
DAIICHITOOL
[Features]
A centre reamer with an overall length of 45 to 99 mm and a handle diameter of 6 to 12 mm.Configure nowStarting from∗ ： 33.97 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
WXL-Coated Chamfering Cutter Negative Type Regular W-HSCT-N
OSG
[Features]
· A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining.
The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing.
Significantly reduces turning-back, or burring.
Excellent chip discharge.Configure nowStarting from∗ ： 79.82 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
WXL-Coated Chamfering Cutter Positive Type Regular W-HSCT-P
OSG
[Features]
· A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining.
The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing.
Significantly reduces turning-back, or burring.
Excellent chip discharge.Configure nowStarting from∗ ： 79.82 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
WXL-Coated Chamfering Cutter Positive Type Long Shank WLS-HSCT-P
OSG
[Features]
· A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining.
The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing.
Significantly reduces turning-back, or burring.
Excellent chip discharge.Configure nowStarting from∗ ： 84.46 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
WXL-Coated Chamfering Cutter Negative Type Long Shank WLS-HSCT-N
OSG
[Features]
· A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining.
The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing.
Significantly reduces turning-back, or burring.
Excellent chip discharge.Configure nowStarting from∗ ： 84.46 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
MUGEN Coating C Chamfer Cutter NSCV-M
NS TOOL
[Features]
· Enables easy C chamfering.
· Uses MUGEN coating that dramatically improves the durability.Configure nowStarting from∗ ： 111.08 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
X Coating Miniature Inner R Cutter NCR-2X
NS TOOL
[Features]
· Cutter for hardness of 55HRC or less.
tool material: super micro-grain carbide alloy
Surface treatment: X coating
Number of edges: 2 flutes
Machining applications: Curved surface chamfering- Volume Discount
Configure nowStarting from∗ ： 95.83 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 90°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.
· Standard type.Configure nowStarting from∗ ： 93.69 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 120°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.
· Standard type.Configure nowStarting from∗ ： 93.69 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 60°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material.
· Long tool life, improved cutting speed and reduced machining time.
· Standard type.Configure nowStarting from∗ ： 125.71 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 90°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material.
· Long tool life, improved cutting speed and reduced machining time.
· Standard type.Configure nowStarting from∗ ： 125.71 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 120°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material.
· Long tool life, improved cutting speed and reduced machining time.
· Standard type.Configure nowStarting from∗ ： 125.71 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 60°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.
· Long type.Configure nowStarting from∗ ： 110.87 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 90°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.
· Long type.Configure nowStarting from∗ ： 110.87 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 120°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.
· Long type.Configure nowStarting from∗ ： 110.87 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
V-Cut Carbide End Mills, Long Type, Coated Series AMVL 60°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material.
· Long tool life, improved cutting speed and reduced machining time.
· Long type.Configure nowStarting from∗ ： 134.27 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
V-Cut Carbide End Mills, Long Type, Coated Series AMVL 90°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material.
· Long tool life, improved cutting speed and reduced machining time.
· Long type.Configure nowStarting from∗ ： 134.27 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Carbide V Cut End Mill Long Type Coated Series AMVL 120°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material.
· Long tool life, improved cutting speed and reduced machining time.
· Long type.Configure nowStarting from∗ ： 134.27 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 60°
MAKOTOLOY
[Features]
· A small but high quality end mill that can also be used with high precision machining technology.Configure nowStarting from∗ ： 104.69 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 90°
MAKOTOLOY
[Features]
· A small but high quality end mill that can also be used with high precision machining technology.Configure nowStarting from∗ ： 104.69 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 120°
MAKOTOLOY
[Features]
· A small but high quality end mill that can also be used with high precision machining technology.Configure nowStarting from∗ ： 104.69 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
V-Cut Small Diameter Carbide End Mills Coated Series AMVS 60°
MAKOTOLOY
[Features]
· A small but high quality end mill that can also be used with high precision machining technology.Configure nowStarting from∗ ： 118.22 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
V-Cut Small Diameter Carbide End Mills Coated Series AMVS 90°
MAKOTOLOY
[Features]
· A small but high quality end mill that can also be used with high precision machining technology.Configure nowStarting from∗ ： 118.22 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
V-Cut Small Diameter Carbide End Mills Coated Series AMVS 120°
MAKOTOLOY
[Features]
· A small but high quality end mill that can also be used with high precision machining technology.Configure nowStarting from∗ ： 118.22 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
V Spot Carbide Drill, Standard Type, TiN Coat, 90°
MAKOTOLOY
[Features]
· Higher positioning precision than normal twist drills thanks to the small chisel edge.
· Made using carefully selected carbides with a TiN coating, ensuring a long tool life.
· The type with a 90° tip angle is capable of performing centering and chamfering simultaneously.Configure nowStarting from∗ ： 110.84 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
V Spot Carbide Drill, Standard Type, TiN Coat, 120°
MAKOTOLOY
[Features]
· Higher positioning precision than normal twist drills thanks to the small chisel edge.
· Made using carefully selected carbides with a TiN coating, ensuring a long tool life.Configure nowStarting from∗ ： 110.84 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
V Spot Carbide Drill, Long Type, TiN Coat, 90°
MAKOTOLOY
[Features]
· Higher positioning precision than normal twist drills thanks to the small chisel edge.
· Made using carefully selected carbides with a TiN coating, ensuring a long tool life.
· The type with a 90° tip angle is capable of performing centering and chamfering simultaneously.Configure nowStarting from∗ ： 145.35 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
V Spot Carbide Drill, Long Type, TiN Coat, 120°
MAKOTOLOY
[Features]
· Higher positioning precision than normal twist drills thanks to the small chisel edge.
· Made using carefully selected carbides with a TiN coating, ensuring a long tool life.Configure nowStarting from∗ ： 145.35 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Chamfering Cutter, Carbide, Uramen-Maru (Standard Type) C-BMC-V
THE CUT
[Features]
· No need to turn over the work material. (Also removes through-hole burrs)
· Both sides can be chamfered with the one cutter tool.
· Ultra-fine particle carbide with TiAlN coating for a longer tool life.Configure nowStarting from∗ ： 189.86 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Mini Corner Rounding Cutter, Carbide C-CRC-V
THE CUT
[Features]
· Ideal for CNC machining.
· Capable of machining extremely thin workpieces.
· Simple regrinding/repolishing.- Volume Discount
Configure nowStarting from∗ ： 116.82 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
V Men-Maru C-MPE-V
THE CUT
[Features]
· Capable of chamfering, side surface machining, etc. For models with a tip angle of 90° or 120°, work such as V-grooving, hole drilling and centering can all be done without the use of additional tools.
· Sharp cutting edge with a helix angle of 40°. Boasts good cutting chip discharge, delivering excellent cutting performance.
· Ultra-fine particle carbide with a TiAlN coating for high rigidity, excellent wear resistance and a significantly longer tool life.Configure nowStarting from∗ ： 116.30 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Point Set Drill, Carbide C-NC-PSD
THE CUT
[Features]
· Allows for machining at higher speeds and a significantly longer tool life than with a high speed steel (TiAlN) point set drill.- Volume Discount
Configure nowStarting from∗ ： 59.35 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Chamfering Cutter 90°, 3 Flutes, TiN Coat, CSQ-G
THE CUT
[Features]
· The tool life is drastically improved through the use of 3 flutes and a TiN coating.
· No chatter.
· Capable of true circular machining.- Volume Discount
Configure nowStarting from∗ ： 56.02 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Double Sided Chamfering Cutter 45° DFC
THE CUT
[Features]
· Capable of V-grooving both front and back surfaces as well as the side surfaces.
· Capable of chamfering up to C2.8 for front chamfering.
· The use of a dedicated insert (4 cutting edges) delivers high precision machining.Configure nowStarting from∗ ： 256.85 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Insert For New Tornado MT-CP / CC
THE CUT
[Features]
Cutting speed (m/min): 60 to 150
Feed speed (mm/t): 0.02 to 0.08
Set screw: MST-4S, MST-2.5S, MST-3S, MST-2 (M5), MST-2L040 (M6)Configure nowStarting from∗ ： 15.78 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days |
| Application |
| Tip angle (θ) |
| Tool Diameter (D)(mm) |
| work material |
| Single blade, two blades |
| Peripheral Blade Y/N |
| Tool Material Type |
| Coating Y/N |
| Coating Type |
| R Size (R)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | KYOWA SEIKO | KYOWA SEIKO | KYOWA SEIKO | SANDVIK | SANDVIK | SPEED TIGER | YAMAWA MFG | NOGAJAPAN | OSG | DAIICHITOOL | DAIICHITOOL | OSG | OSG | OSG | OSG | NS TOOL | NS TOOL | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | THE CUT | THE CUT | THE CUT | THE CUT | THE CUT | THE CUT | THE CUT |
| Product Series | CoroMill Plura - General Purpose Chamfering End Mill, Cylindrical Shank / Weldon Shank | CoroMill Plura General-Purpose End Mill For Round Chamfering, 1U000 | Medium Hardness Carbon Steel / Center Hole Drill for High Speed Machining MHCDS | FX-MG-CS X 90 Hole Chamfering, 3-Flute Countersink, FX Coating Carbide 90° Series | WXL-Coated Chamfering Cutter Positive Type Long Shank WLS-HSCT-P | WXL-Coated Chamfering Cutter Negative Type Long Shank WLS-HSCT-N | V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 90° | V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 120° | V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 60° | V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 90° | V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 120° | V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 60° | V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 90° | V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 120° | V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 60° | V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 90° | V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 120° | V-Cut Small Diameter Carbide End Mills Coated Series AMVS 60° | V-Cut Small Diameter Carbide End Mills Coated Series AMVS 90° | V-Cut Small Diameter Carbide End Mills Coated Series AMVS 120° | Chamfering Cutter, Carbide, Uramen-Maru (Standard Type) C-BMC-V | ||||||||||||||||||||||||
| CAD | |||||||||||||||||||||||||||||||||||||||||||||
| Starting from∗ | 75.96 € *Unit price with basic configuration | 109.96 € *Unit price with basic configuration | 109.96 € *Unit price with basic configuration | 116.87 € *Unit price with basic configuration | 117.96 € *Unit price with basic configuration | 42.39 € *Unit price with basic configuration | 20.51 € *Unit price with basic configuration Volume Discount | 31.82 € *Unit price with basic configuration Volume Discount | 119.56 € *Unit price with basic configuration Volume Discount | 56.40 € *Unit price with basic configuration | 33.97 € *Unit price with basic configuration | 79.82 € *Unit price with basic configuration | 79.82 € *Unit price with basic configuration | 84.46 € *Unit price with basic configuration | 84.46 € *Unit price with basic configuration | 111.08 € *Unit price with basic configuration | 95.83 € *Unit price with basic configuration | 93.69 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024 | 93.69 € *Unit price with basic configuration | 125.71 € *Unit price with basic configuration | 125.71 € *Unit price with basic configuration | 125.71 € *Unit price with basic configuration | 110.87 € *Unit price with basic configuration | 110.87 € *Unit price with basic configuration | 110.87 € *Unit price with basic configuration | 134.27 € *Unit price with basic configuration | 134.27 € *Unit price with basic configuration | 134.27 € *Unit price with basic configuration | 104.69 € *Unit price with basic configuration | 104.69 € *Unit price with basic configuration | 104.69 € *Unit price with basic configuration | 118.22 € *Unit price with basic configuration | 118.22 € *Unit price with basic configuration | 118.22 € *Unit price with basic configuration | 110.84 € *Unit price with basic configuration | 110.84 € *Unit price with basic configuration | 145.35 € *Unit price with basic configuration | 145.35 € *Unit price with basic configuration | 189.86 € *Unit price with basic configuration | 116.82 € *Unit price with basic configuration Volume Discount | 116.30 € *Unit price with basic configuration | 59.35 € *Unit price with basic configuration Volume Discount | 56.02 € *Unit price with basic configuration Volume Discount | 256.85 € *Unit price with basic configuration | 15.78 € *Unit price with basic configuration |
| Min. Shipping Days | 8 Days | 8 Days | 8 Days | 6 Days | 8 Days | 7 Days | 8 Days | 5 Days | 6 Days | 8 Days | 8 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | Same day | 8 Days | 8 Days | 8 Days | 8 Days | 8 Days | 8 Days | 8 Days | 6 Days | 8 Days | 8 Days | 8 Days | 8 Days | 8 Days | 8 Days | 8 Days | 8 Days | 8 Days | 8 Days | 8 Days | 8 Days | 8 Days | 6 Days | 6 Days | 6 Days | 6 Days | 8 Days | 6 Days |
| Application | Centering (Positioning) | Chamfering/Horizontal | Chamfering/Horizontal | Chamfering/Horizontal | Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Other | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Chamfering/Horizontal | Centering (Positioning) | Chamfering/Horizontal | - | - | - | Chamfering/Horizontal | Round Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling | Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling | Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling | Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling | Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling | Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Hole Chamfer / Drilling / Other | Round Chamfer | Centering (Positioning) / Chamfering/Horizontal / V Groove / Drilling / Other | Hole Chamfer | Hole Chamfer | Hole Chamfer / V Groove | - |
| Tip angle (θ) | 120° | - | - | 90° | - | 90 | 60 ～ 90 | - | 90 | 60° ～ 90° | 60° ～ 90° | 90° | - | - | - | 45° | - | 90 | 120 | 60 | 90 | 120 | 60 | 90 | 120 | 60 | 90 | 120 | 60 | 90 | 120 | 60 | 90 | 120 | 90 | 120 | 90 | 120 | 90° | - | 60 ～ 120 | 90 | 90 | - | - |
| Tool Diameter (D)(mm) | 0.3 ～ 3 | - | - | 8 ～ 12 | 6 ～ 20 | 3 ～ 20 | 1 ～ 6 | - | 1 ～ 3.8 | 8 ～ 46 | 6 ～ 50 | - | - | - | - | 4 ～ 6 | 1.5 | 1 ～ 20 | 1 ～ 20 | 1 ～ 20 | 1 ～ 20 | 1 ～ 20 | 3 ～ 20 | 3 ～ 20 | 3 ～ 20 | 3 ～ 20 | 3 ～ 20 | 3 ～ 20 | 0.3 ～ 0.9 | 0.3 ～ 0.9 | 0.3 ～ 0.9 | 0.3 ～ 0.9 | 0.3 ～ 0.9 | 0.3 ～ 0.9 | 3 ～ 25 | 3 ～ 25 | 3 ～ 25 | 3 ～ 25 | 2.8 ～ 12 | 1 ～ 2.5 | 3 ～ 20 | 3 ～ 10 | 6.3 ～ 31 | 11 ～ 20 | - |
| work material | General Steel[◎] | General Steel[◎] | General Steel[◎] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[◎] | General Steel[○] | General Steel[○] | General Steel[◎] | General Steel[○] | General Steel[○] | General Steel[◎] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] |
| Single blade, two blades | Double-edged | Single blade | Single blade | Single blade | Single blade | Double-edged | Single blade | - | Single blade | Single blade | Single blade | Single blade | - | - | - | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | - | - |
| Peripheral Blade Y/N | - | - | - | N/A | N/A | Available | Available | - | N/A | Available | Available | N/A | - | - | - | Available | N/A | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Tool Material Type | Carbide | Carbide | Carbide | Carbide | Carbide | - | High-speed steel | High-speed steel / Cobalt HSS | Carbide | Cobalt HSS | High-speed steel | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | High-speed steel | - | - |
| Coating Y/N | N/A | N/A | N/A | Available | N/A | Available | Available | - | Available | - | - | Available | Available | Available | Available | Available | Available | N/A | N/A | Available | Available | Available | N/A | N/A | N/A | Available | Available | Available | N/A | N/A | N/A | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | N/A | Available | - | - |
| Coating Type | - | - | - | Other | - | Other | - | - | TiAlN | - | - | - | Other | Other | Other | TiAlN | TiCN | - | - | TiAlN | TiAlN | TiAlN | - | - | - | TiAlN | TiAlN | TiAlN | - | - | - | TiAlN | TiAlN | TiAlN | TiN | TiN | TiN | TiN | TiAlN | TiAlN | TiAlN | - | TiN | - | - |
| R Size (R)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1.25 ～ 3 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.25 ～ 2.5 | - | - | - | - | - |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Application
-
Tip angle (θ)
-
Tool Diameter (D)(mm)
- 0 to 2
- 0.03
- 0.04
- 0.05
- 0.06
- 0.07
- 0.08
- 0.09
- 0.1
- 0.11
- 0.12
- 0.13
- 0.14
- 0.15
- 0.16
- 0.17
- 0.18
- 0.19
- 0.2
- 0.21
- 0.22
- 0.23
- 0.24
- 0.25
- 0.26
- 0.27
- 0.28
- 0.29
- 0.3
- 0.3, 0.6
- 0.35
- 0.4
- 0.45
- 0.45～2.1
- 0.45～2.7
- 0.5
- 0.5, 1
- 0.55
- 0.6
- 0.65
- 0.65～2.1
- 0.65～2.7
- 0.7
- 0.75
- 0.8
- 0.85
- 0.9
- 0.95
- 1
- 1, 2
- 1–6
- 1.1
- 1.2
- 1.25
- 1.3
- 1.4
- 1.5
- 1.6
- 1.6～3.35
- 1.7
- 1.8
- 1.9
- 2.
- 2
- 2–10
- 2～13
- 2.1
- 2.2
- 2.3
- 2.4
- 2.5
- 2.5～5.3
- 2.6
- 2.7
- 2.8
- 2.9
- 3
- 3~14
- 3 to 15
- 3.1
- 3.15
- 3.17
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.8
- 4
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.8
- 5
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.6
- 5.8
- 6
- 6.2
- 6.3
- 6.3,8.3,10.4,12.4,16.5,20.5
- 6.30/8.30/10.40/12.40/16.50/20.50
- 6.3/8.3/10.4/12.4/16.5/20.5
- 6.35
- 6.4
- 6.5
- 6.6
- 6.8
- 7
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 7.92
- 8
- 8.2
- 8.3
- 8.4
- 8.5
- 8.8
- 9
- 9.1
- 9.4
- 9.5
- 9.52
- 9.53
- 10
- 10.1
- 10.2
- 10.3
- 10.4
- 10.5
- 10.8
- 11
- 11.1
- 11.2
- 11.4
- 11.5
- 11.88
- 12
- 12.1
- 12.3
- 12.4
- 12.5
- 12.7
- 13
- 13.4
- 13.5
- 14
- 14.2
- 14.4
- 14.5
- 14.6
- 14.8
- 15
- 15.1
- 15.2
- 15.4
- 15.5
- 15.6
- 15.87
- 15.88
- 16
- 16.15
- 16.3
- 16.5
- 17
- 17.1
- 17.7
- 18
- 18.2
- 18.5
- 18.6
- 19
- 19.05
- 19.5
- 20
- 20.5
- 21
- 21.77
- 22
- 22.3
- 22.5
- 23
- 23.4
- 23.5
- 24
- 24.5
- 25
- 25.0(+0.3)
- Max: 25, Min: 4.2
- 25.20
- 25.3
- 25.4
- 26
- 26.5
- 26.6
- 27
- 27.5
- 28
- 28.5
- 29
- 29.9
- 30
- Max: 30, Min: 4
- 30.20
- 30.5
- 31
- Max: 31, Min: 10
- 31.5
- 31.7
- 31.9
- 32
- 32.6
- 32.7
- 33.1
- 33.3
- 34
- 34.1
- 34.8
- 34.9
- 35
- 35.4
- 35.9
- 36
- 36.9
- 37
- 37.1
- 37.9
- 38
- 39
- 39.83
- 40
- Max: 41, Min: 20
- 42
- 43
- 45
- 45.6
- 46
- 47
- 48
- 49
- 49.85～134.6
- 50
- 50.7
- 51
- 52
- 52.8
- 53
- 53.6
- 53.91
- 54
- 54.3
- 55
- 56
- 56.8
- 57.0
- 57.9
- 58
- 58.2
- 60
- 61.4
- 62
- 62.2
- 63
- 64
- 64.6
- 65
- 66
- 67.4
- 67.94
- 69.2
- 69.8
- 70
- 71.8
- 72
- 73.3
- 74
- 75
- 76
- 80
- 90
- 95
- 100
-
work material
-
Single blade, two blades
-
Peripheral Blade Y/N
-
Tool Material Type
-
Coating Y/N
-
Coating Type
-
R Size (R)(mm)
- 0.1
- 0.15
- 0.2
- 0.25
- 0.3
- 0.35
- 0.4
- 0.45
- 0.5
- R0.5
- 0.5/1/1.5/2
- 0.5 to 4
- 0.5~5
- 0.55
- 0.6
- 0.65
- 0.7
- 0.75
- R0.75
- 0.8
- 0.85
- 0.9
- 0.95
- 1
- 1RM
- 1RY
- R1
- 1, 1.5
- 1/2/3/4
- 1–3
- 1–5
- 1.05
- 1.1
- 1.15
- 1.2
- 1.25
- R1.25
- 1.3
- 1.35
- 1.4
- 1.45
- 1.5
- R1.5
- 1.55
- 1.6
- 1.65
- 1.7
- 1.75
- 1.8
- 1.85
- 1.9
- 1.95
- 2
- 2RM
- 2RY
- R2
- 2, 3
- 2.05
- 2.1
- 2.15
- 2.2
- 2.25
- 2.3
- 2.35
- 2.4
- 2.45
- 2.5
- R2.5
- 2.6
- 2.7
- 2.75
- 2.8
- 2.9
- 3
- 3RM
- 3RY
- R3
- 3.25
- 3.5
- R3.5
- 3.75
- 4
- 4RM
- 4RY
- R4
- 4.25
- 4.5
- R4.5
- 4.75
- 5
- 5RM
- R5
- 5–10
- 5.25
- 5.5
- 5.75
- 6
- R6
- 6.25
- 6.5
- 6.75
- 7
- R7
- 7.25
- 7.5
- 7.75
- 8
- R8
- 8.25
- 8.5
- 8.75
- 9
- R9
- 9.5
- 10
- R10
- 10.5
- 11
- 11.5
- 12
- R12
- 12.5
- R12.5
- 13
- 13.5
- 14
- 14.5
- 15
- R15
- 15.5
- 16
- R16
- 16.5
- 17
- 17.5
- 18
- 18.5
- 19
- 19.5
- 20
- 20.5
- 21
- 21.5
- 22
- 22.5
- 23
- 23.5
- 24
- 24.5
- 25
- 25.5
- 26
- 26.5
- 27
- 27.5
- 28
- 28.5
- 29
- 29.5
- 30
- XRM
- XRY
Brand
-
- FUJIGEN (60)
- IWATA TOOL (35)
- MAKOTOLOY (22)
- GUHRING (22)
- OSG (20)
- EIKOSHA (19)
- THE CUT (13)
- NAKAJIMAKOUKI (9)
- YAMAWA MFG (9)
- ATOM (7)
- BIG KAISER (7)
- ILIX (7)
- KYOWA SEIKO (7)
- SANKO MFG (7)
- FUKUDA (5)
- OKAZAKI SEIKO (4)
- ASAHI TOOLS (3)
- DIXI (3)
- NS TOOL (3)
- SANDVIK (3)
- TRUSCO NAKAYAMA (3)
- DAIICHITOOL (2)
- DIJET (2)
- NOGAJAPAN (2)
- NINE9 (2)
- 7 LEADERS (1)
- NT TOOL (1)
- SPEED TIGER (1)
- UNION TOOL (1)
- PREVOST (0)
- MAPAL (0)
- NIKKEN KOSAKUSHO (0)
- RYOKO SEIKI (0)
- STAR-M (0)
- WALTER TITEX (0)
- SKC (0)
- ESCO (0)
- WERA (0)
- WATERMILLS (0)
- METABO (0)
- ALPEN (0)
- REX TOOLS (0)
- TAIYO-TOOL (0)
- WOLFCRAFT (0)
CAD data type
-
- 2D
- 3D
Categories related to Chamfering / Centering Tools
-
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
Fizetési mód
Átutalás
Előre fizetés
Igény szerinti gyártás
Tanúsítványok
Copyright © MISUMI Corporation Minden jog fenntartva.