Szűrési feltételek

Mindent töröl

Készlet
Csak a készleten lévő tételek megjelenítése

Screw Types

Meter
Unified

Screw size (Nominal)

Pitch (P), Number of Threading(mm)

0.25
0.4

Chamfer threads (Lcf)

1P
1.5P
2P
2.5 P
2.5P
3P
4P
5 P
5P
6P

Tool Material Type

High-speed steel
Cobalt HSS
Powder high-speed steel
Carbide
Alloy HSS
Vanadium High-Speed Steel

work material

Low-Carbon Steel (carbon alloy less than 0.25%)
Medium carbon steel (carbon content 0.25 to 0.45%)
High Carbon Steel (C with a content over 0.45%)
Alloy Steel (SCM)
Stainless Steel (JIS-SUS)
Quenched and tempered steel (25 to 35 HRC)
Quenched and tempered steel (35 to 45 HRC)
Quenched and tempered steel (45 to 55 HRC)
High Hardness Steel (50-60 HRC)
Tool Steel (Before SKD Hardening)
Steel casting (SC)
Cast Iron (FC)
Ductile Cast Iron (FCD)
Copper (Cu)
Brass (Bs)
Brass cast iron (BsC)
Bronze (Pb)
Aluminum Rolled Material (AL)
Aluminum Alloy Casting (AC, ADC)
Magnesium Alloy (MC)
Zinc Alloy Casting (ZDC)
Titanium Alloy (Ti-6Al-4V, etc)
Nickel-based alloy (Inconel, etc.)
Thermosetting plastic (bakelite, phenol, etc.)
Thermoplastic plastic (vinyl chloride, nylon, etc.)

Tap Type

Spiral Tap
Point tap
Roll tap
Hand Tap
Thread cutter
Die

Hole type

For through hole
For blind hole

Coating Y/N

Available
N/A

Coating Type

TiAlN
TiCN
TiN
Non-Coated
Nitriding Treatment
Other

Overall Length (L)(mm)

Gyártó

Screw-Hole-Related Tools (Screw size (Nominal): M2 2 oldal)

Threading tools have functions to cut threads in accordance with the required thread types and sizes, or to conduct plastic forming. Commonly-used tool type is formed tools called taps. They are used in many different ways; for example, handles are attached to them for manual machining, or for large-lot production, they are mounted to machine tools called tool holders or NC machine tool. High-speed steel is most commonly employed for these tools, and alloy carbide (coated alloy carbide is mainly applied) is also increasingly employed for its durability. When threading with taps, the thinner taps are, the more likely they break. As cutting chips solidify with heat, or the tap end makes contact with the bottom of pilot hole, there is more possibility the tap is damaged. Additionally, when using a coil insert, a dedicated tap needs to be used rather than a regular tap.

69 elem

* Információk a szállítási határidőkről, szállítási költségekről és árakról.

Lista

Fénykép

Specifikációk összehasonlítása

Megjelenítendő elemek száma:Rendezési szempont:

Feladási dátum:

Előző

Point Tap Series, for Thin Plates, EX-SS-POT

KEDVEZMÉNYEZETT
Volume Discount

OSG

Point Tap Series, for Thin Plates, EX-SS-POT

Well suited for thread cutting of soft steel sheets with a pull strength of 700N or below. Achieves Beautiful Finishing Surfaces by Preventing Whiskers, Burrs, and Tears on Punched Holes and Buring Holes

További részletek

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M2	0.4	5P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Stainless Steel (JIS-SUS)[○] / Copper (Cu)[○]	Point tap	For through hole	N/A

Normál ár (ÁFA nélkül):

12.65 €

Normál ár (ÁFA nélkül):

Speciális ár

Normál feladási dátum:

15 munkanapok

Screw-Hole-Related Tools (Screw size (Nominal): M2 2 oldal)

A következőhöz kapcsolódó kategóriák: Screw-Hole-Related Tools