Thread Cutters（Screw size (Nominal)：M20）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Configure now
Starting from∗ ： 301.37 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Carbide Solid Mill Thread Metric Screw (ISO)
CARMEX
Enables internal threading to be performed in a single pass.
[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.Configure nowStarting from∗ ： 514.91 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads
MISUMI
Threading cutters that enable the high-speed stable processing are available at special prices- Volume Discount
Configure nowStarting from∗ ： 273.56 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads
MISUMI
[Features]
-Thread cutting with small diameters from M1.4 × 0.3 (pilot hole diameter ø1.1 mm) is possible
-Reduced cutting load due to short flute length (3 webs)
-Enables effective thread cutting right into the corners of blind holes.- Volume Discount
Configure nowStarting from∗ ： 452.22 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Thread Cutter for Blind Hole / Through Hole TM SP for 2 X D 3737
GUHRING
[Features]
· Threading is performed with helical cutting.
· If the pitch is the same, one unit can process threads with different diameters.
· Both right-handed and left-handed female threads can be machined.Configure nowStarting from∗ ： 565.31 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Thread Cutter for Blind Hole / Through Hole TM SP for 2 X D 4133
GUHRING
[Features]
· Threading is performed with helical cutting.
· If the pitch is the same, one unit can process threads with different diameters.
· Both right-handed and left-handed female threads can be machined.Configure nowStarting from∗ ： 372.90 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Carbide Solid Mill Thread with Oil Hole ISO
CARMEX
Metric thread / for I.D.
[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.Configure nowStarting from∗ ： 643.40 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
MTZ Jet Mill Thread with Oil Hole ISO
CARMEX
For metric I.D. thread.
[Features]
· New type of carbide solid mill thread with oil holes inside the spiral groove.
· Efficiently conveys cooling fluid to the cutting edge for smoother machining.
· Especially effective with through holes.
· Effective for cutting powder removal.
· Also suitable for machinery that does not include an external lubricating device.Configure nowStarting from∗ ： 668.95 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 659.08 € Min. Shipping Days ： Quote *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days |
| Screw Types |
| Screw size (Nominal) |
| Pitch (P), Number of Threading(mm) |
| Tool Material Type |
| work material |
| Tap Type |
| Hole type |
| Coating Y/N |
| Coating Type |
| Overall Length (L)(mm) |
|
|
|
|
|
|
|
|
| |
| Brand | FEIN | CARMEX | MISUMI | MISUMI | GUHRING | GUHRING | CARMEX | CARMEX | SANDVIK |
| Product Series | TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads | TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads | Thread Cutter for Blind Hole / Through Hole TM SP for 2 X D 3737 | Thread Cutter for Blind Hole / Through Hole TM SP for 2 X D 4133 | SANDVIK CoroMill Plura Solid Carbide End Mill for Thread Milling | ||||
| Starting from∗ | 301.37 € *Unit price with basic configuration Volume Discount | 514.91 € *Unit price with basic configuration | 273.56 € *Unit price with basic configuration Volume Discount | 452.22 € *Unit price with basic configuration Volume Discount | 565.31 € *Unit price with basic configuration | 372.90 € *Unit price with basic configuration | 643.40 € *Unit price with basic configuration | 668.95 € *Unit price with basic configuration | 659.08 € *Unit price with basic configuration |
| Min. Shipping Days | 7 Days | 5 Days | 5 Days | 7 Days | 8 Days | 8 Days | 5 Days | 5 Days | Quote |
| Screw Types | - | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter |
| Screw size (Nominal) | M20 | M20 | M20 | M20 | M20 | M20 | M20 | M20 | M20 |
| Pitch (P), Number of Threading(mm) | - | 2.5 | 2.5 | 2.5 | 1.5 ～ 2.5 | 2.5 | 2.5 | 2.5 | 2.5 |
| Tool Material Type | - | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | - |
| work material | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] | - | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | - |
| Tap Type | - | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | - |
| Hole type | - | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For through hole / For blind hole | - |
| Coating Y/N | - | Available | Available | Available | Available | Available | Available | Available | - |
| Coating Type | - | TiAlN | TiAlN | TiAlN | TiCN | TiCN | Nitriding Treatment | Nitriding Treatment | - |
| Overall Length (L)(mm) | - | 84 ～ 105 | 105 ～ 115 | 105 | 102 | 102 | 105 | 101 | 105 |
Loading...
Filter by:
-
Screw Types
- Meter
- Unified
- Whitworth
- Taper for Pipe
- Parallel for Pipes
- Other
-
Screw size (Nominal)
- NO.0-80UNF
- S0.1
- NO.1-72UNF
- NO.1-64UNC
- NO.10-32UNF
- NO.10-24UNC
- NO.12-28UNF
- NO.12-24UNC
- S0.2
- NO.2-64UNF
- NO.2-56UNC
- S0.3
- NO.3-56UNF
- NO.3-48UNC
- S0.4
- NO.4-48UNF
- NO.4-40UNC
- S0.5
- NO.5-44UNF
- NO.5-40UNC
- S0.6
- NO.6-40UNF
- S0.8
- NO.8-36UNF
- NO.8-32UNC
- M1
- S1
- UNC 1
- G1"-3"
- G1/2 5/8
- G1/4
- UNC 1/4
- UNF 1/4
- 1/4-28UNF
- 1/4-20UNC
- G1/8
- M1.2
- S1.2
- M1.4
- S1.4
- M1.6
- M2
- UNC 2
- UNF 2
- M2.2
- M2.5
- M3
- UNC 3
- UNF 3
- G3/8
- M3 - M10
- M3 - M12
- 3.5
- M3.5
- 4
- M4
- UNC 4
- UNF 4
- M5
- G5/8 3/4
- M5 - M12
- UNC 5/16
- UNF 5/16
- 6
- M6
- MF6
- UNC 6
- UNF 6
- 7 execution M3 - M12
- 7.5
- M8
- MF8
- UNC 8
- 9
- M10
- MF10
- UNC 10
- UNF 10
- M12
- MF12
- Mf12
- M12 x 1.5
- M14
- MF14
- M16
- MF16
- Mf16
- M16 x 1.5
- M18
- M20
- MF20
- Mf20
- M20 x 1.5
- M22
- M24
- MF24
- Mf25
- M25 x 1.5
- M27
- MF28
- Mf32
- 1015
- 1020N100M
- 1020N150M
- 06510X28R
- 10154
- 12204
- 12254N100M
- 12254N150M
- 12254N200M
- 16304N100M
- 16304N150M
- 16304N200M
- 16304N250M
- 20305
- 20505N100M
- 20505N150M
- 20505N200M
- 20505N300M
- 20505N350M
- 25506N100M
- 25506N150M
- 25506N200M
- 25506N300M
- 25506N350M
- 32506
- 32506N150M
- 32506N200M
- 32506N300M
- 035083N075M
- 035083N080M
- 040123N100M
- 060163N050M
- 060163N100M
- 060163N125M
- 065103X28G
- 075203N125M
- 075203N150M
- 080153X19G
- 080153X19R
- 080203N050M
- 080203N100M
- 090244N125M
- 090244N175M
- 100254N050M
- 100254N100M
- 100254N150M
- 100254N200M
- 120204X14G
- 120204X14R
- 120304N100M
- 120304N150M
- 120304N200M
- 160264X11G
- 160264X11R
- 160404N150M
- 160404N200M
- 160404N250M
- 200305X11G
- 200305X11R
- 200505N150M
- 200505N200M
- 200505N300M
-
Pitch (P), Number of Threading(mm)
-
Tool Material Type
-
work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless Steel (JIS-SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
-
Tap Type
-
Hole type
-
Coating Y/N
-
Coating Type
-
Overall Length (L)(mm)
Brand
-
- CARMEX (3)
- GUHRING (2)
- SANDVIK (1)
- FEIN (1)
- WERA (0)
- OSG (0)
- NS TOOL (0)
- BERNSTEIN AG (0)
- RUKO (0)
- STAHLWILLE (0)
- GEDORE (0)
- HAZET (0)
- YAMAWA MFG (0)
- REX TOOLS (0)
CAD data type
-
- 2D
- 3D
Categories related to Thread Cutters
Fizetési mód
Átutalás
Előre fizetés
Igény szerinti gyártás
Tanúsítványok
Copyright © MISUMI Corporation Minden jog fenntartva.