OSG
A Tap Series, Spiral Tap, A-SFT
Screw Types | Screw size (Nominal) | Pitch (P), Number of Threading(mm) | Chamfer threads (Lcf) | Tool Material Type | work material | Tap Type | Hole type | Coating Y/N |
---|---|---|---|---|---|---|---|---|
Meter | M1.7 | 0.35 | 2.5P | Powder high-speed steel | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Spiral Tap | For blind hole | Available |
OSG
Point Tap Series, for General, EX-POT
Screw Types | Screw size (Nominal) | Pitch (P), Number of Threading(mm) | Chamfer threads (Lcf) | Tool Material Type | work material | Tap Type | Hole type | Coating Y/N |
---|---|---|---|---|---|---|---|---|
Meter | M1.7 | 0.35 | 5P | Vanadium High-Speed Steel | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Point tap | For through hole | N/A |
OSG
Hand Tap Series, Super Hard Hand Tap, OTT
Screw Types | Screw size (Nominal) | Pitch (P), Number of Threading(mm) | Chamfer threads (Lcf) | Tool Material Type | work material | Tap Type | Hole type | Coating Y/N |
---|---|---|---|---|---|---|---|---|
Meter | M1.7 | 0.35 | 1.5P ~ 3P | Carbide | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎] | Hand Tap | For through hole / For blind hole | N/A |
OSG
Point Tap Series, Tin Coated, TIN-POT
Screw Types | Screw size (Nominal) | Pitch (P), Number of Threading(mm) | Chamfer threads (Lcf) | Tool Material Type | work material | Tap Type | Hole type | Coating Y/N |
---|---|---|---|---|---|---|---|---|
Meter | M1.7 | 0.35 | 5P | Vanadium High-Speed Steel | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Point tap | For through hole | Available |
OSG
Groove-Free Tap Series VP New Roll VP-NRT
Screw Types | Screw size (Nominal) | Pitch (P), Number of Threading(mm) | Chamfer threads (Lcf) | Tool Material Type | work material | Tap Type | Hole type | Coating Y/N |
---|---|---|---|---|---|---|---|---|
Meter | M1.7 | 0.35 | 2P ~ 4P | Powder high-speed steel | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Roll tap | For blind hole | Available |
OSG
Spiral Tap Series, General Purpose EX-SFT
Screw Types | Screw size (Nominal) | Pitch (P), Number of Threading(mm) | Chamfer threads (Lcf) | Tool Material Type | work material | Tap Type | Hole type | Coating Y/N |
---|---|---|---|---|---|---|---|---|
Meter | M1.7 | 0.35 | 2.5P | Vanadium High-Speed Steel | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Spiral Tap | For blind hole | N/A |
OSG
Spiral Tap Series, Short Chamfer Type, EX-SC-SFT
Screw Types | Screw size (Nominal) | Pitch (P), Number of Threading(mm) | Chamfer threads (Lcf) | Tool Material Type | work material | Tap Type | Hole type | Coating Y/N |
---|---|---|---|---|---|---|---|---|
Meter | M1.7 | 0.35 | 1.5P | Vanadium High-Speed Steel | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] | Spiral Tap | For blind hole | N/A |
OSG
Spiral Tap Series, for Hard-to-Cut Materials, CPM-SFT
Screw Types | Screw size (Nominal) | Pitch (P), Number of Threading(mm) | Chamfer threads (Lcf) | Tool Material Type | work material | Tap Type | Hole type | Coating Y/N |
---|---|---|---|---|---|---|---|---|
Meter | M1.7 | 0.35 | 3P | Powder high-speed steel | High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | Spiral Tap | For blind hole | N/A |
OSG
Groove-Free Tap Series VP New Roll Long Shank VP-LT-NRT
Screw Types | Screw size (Nominal) | Pitch (P), Number of Threading(mm) | Chamfer threads (Lcf) | Tool Material Type | work material | Tap Type | Hole type | Coating Y/N |
---|---|---|---|---|---|---|---|---|
Meter | M1.7 | 0.35 | 2P ~ 4P | Powder high-speed steel | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Roll tap | For blind hole | Available |
OSG
Point Tap Series For Stainless Steel Use EX-SUS-POT
Screw Types | Screw size (Nominal) | Pitch (P), Number of Threading(mm) | Chamfer threads (Lcf) | Tool Material Type | work material | Tap Type | Hole type | Coating Y/N |
---|---|---|---|---|---|---|---|---|
Meter | M1.7 | 0.35 | 4P | Vanadium High-Speed Steel | Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] | Point tap | For through hole | N/A |
OSG
A Tap Series for Pipes Point Tap A-POT
Screw Types | Screw size (Nominal) | Pitch (P), Number of Threading(mm) | Chamfer threads (Lcf) | Tool Material Type | work material | Tap Type | Hole type | Coating Y/N |
---|---|---|---|---|---|---|---|---|
Meter | M1.7 | 0.35 | 5P | Powder high-speed steel | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] | Point tap | For through hole | Available |
YAMAWA MFG
Stainless Steel Point Tap SU+PO / SU-PO
Screw Types | Screw size (Nominal) | Pitch (P), Number of Threading(mm) | Chamfer threads (Lcf) | Tool Material Type | work material | Tap Type | Hole type | Coating Y/N |
---|---|---|---|---|---|---|---|---|
Meter | M1.7 | 0.35 | 5P | High-speed steel | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] | Point tap | For through hole | N/A |
YAMAWA MFG
Dry Processing Roll Tap OL+RZ / OL-RZ
Screw Types | Screw size (Nominal) | Pitch (P), Number of Threading(mm) | Chamfer threads (Lcf) | Tool Material Type | work material | Tap Type | Hole type | Coating Y/N |
---|---|---|---|---|---|---|---|---|
Meter | M1.7 | 0.35 | 4P | Powder high-speed steel | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Roll tap | For through hole | Available |
SANDVIK
SANDVIK CoroTap 400 Forming Tap
Screw Types | Screw size (Nominal) | Pitch (P), Number of Threading(mm) | Chamfer threads (Lcf) | Tool Material Type | work material | Tap Type | Hole type | Coating Y/N |
---|---|---|---|---|---|---|---|---|
Meter | M1.7 | – | – | – | – | – | – | – |
OSG
Spiral Tap Series, Tin Coated, TIN-SFT
Screw Types | Screw size (Nominal) | Pitch (P), Number of Threading(mm) | Chamfer threads (Lcf) | Tool Material Type | work material | Tap Type | Hole type | Coating Y/N |
---|---|---|---|---|---|---|---|---|
Meter | M1.7 | 0.35 | 2.5P | Vanadium High-Speed Steel | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Spiral Tap | For blind hole | Available |
OSG
Point Tap Series, for Difficult-to-Machine Material, CPM-POT
Screw Types | Screw size (Nominal) | Pitch (P), Number of Threading(mm) | Chamfer threads (Lcf) | Tool Material Type | work material | Tap Type | Hole type | Coating Y/N |
---|---|---|---|---|---|---|---|---|
Meter | M1.7 | 0.35 | 5P | Powder high-speed steel | High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | Point tap | For through hole | N/A |
OSG
Groove-Free Tap Series IT New Roll IT-NRT
Screw Types | Screw size (Nominal) | Pitch (P), Number of Threading(mm) | Chamfer threads (Lcf) | Tool Material Type | work material | Tap Type | Hole type | Coating Y/N |
---|---|---|---|---|---|---|---|---|
Meter | M1.7 | 0.35 | 2P | Powder high-speed steel | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Roll tap | For blind hole | Available |
OSG
Groove-Free Tap Series, Tin Coated, TIN-NRT
Screw Types | Screw size (Nominal) | Pitch (P), Number of Threading(mm) | Chamfer threads (Lcf) | Tool Material Type | work material | Tap Type | Hole type | Coating Y/N |
---|---|---|---|---|---|---|---|---|
Meter | M1.7 | 0.35 | 2P ~ 4P | Vanadium High-Speed Steel | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Roll tap | For blind hole | Available |
OSG
Groove-Free Tap Series VP New Roll Short Chamfer VP-SC-NRT
Screw Types | Screw size (Nominal) | Pitch (P), Number of Threading(mm) | Chamfer threads (Lcf) | Tool Material Type | work material | Tap Type | Hole type | Coating Y/N |
---|---|---|---|---|---|---|---|---|
Meter | M1.7 | 0.35 | 1P | Powder high-speed steel | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Roll tap | For blind hole | Available |
OSG
Groove-Free Tap Series X Performer S-XPF
Screw Types | Screw size (Nominal) | Pitch (P), Number of Threading(mm) | Chamfer threads (Lcf) | Tool Material Type | work material | Tap Type | Hole type | Coating Y/N |
---|---|---|---|---|---|---|---|---|
Meter | M1.7 | 0.35 | 2P ~ 4P | Vanadium High-Speed Steel | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Roll tap | For through hole / For blind hole | Available |
TANOI MFG
Screw Types | Screw size (Nominal) | Pitch (P), Number of Threading(mm) | Chamfer threads (Lcf) | Tool Material Type | work material | Tap Type | Hole type | Coating Y/N |
---|---|---|---|---|---|---|---|---|
Meter | M1.7 | 0.2 ~ 0.35 | 1P ~ 4P | High-speed steel | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Titanium Alloy (Ti-6Al-4V, etc)[○] | Roll tap | – | Available |
TANOI MFG
Screw Types | Screw size (Nominal) | Pitch (P), Number of Threading(mm) | Chamfer threads (Lcf) | Tool Material Type | work material | Tap Type | Hole type | Coating Y/N |
---|---|---|---|---|---|---|---|---|
Meter | M1.7 | 0.2 ~ 0.35 | 1P ~ 4P | High-speed steel | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Roll tap | – | Available |
YAMAWA MFG
Titanium Coating Roll Tap R+V / R-V
Screw Types | Screw size (Nominal) | Pitch (P), Number of Threading(mm) | Chamfer threads (Lcf) | Tool Material Type | work material | Tap Type | Hole type | Coating Y/N |
---|---|---|---|---|---|---|---|---|
Meter | M1.7 | 0.35 | 2P | High-speed steel | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Roll tap | For through hole / For blind hole | Available |
YAMAWA MFG
Solid Die D for Metric Threads
Screw Types | Screw size (Nominal) | Pitch (P), Number of Threading(mm) | Chamfer threads (Lcf) | Tool Material Type | work material | Tap Type | Hole type | Coating Y/N |
---|---|---|---|---|---|---|---|---|
Meter | M1.7 | 0.35 | – | High-speed steel | – | Die | – | N/A |