ISCAR
Cam Drill (Replaceable-Head Drill Body) DCM-3D Processing Diameter 7.5 mm–25.9 mm
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
21.0~21.9 | 63 | General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] | – | 146.8 | End Mill Shank | N/A | – | Available |
ISCAR
SUMOCHAM (Head Replacement Type Drill Body) DCN-3D, Machining Diameter 6.0 mm–32.9 mm
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
21.0~21.9 | 63 | General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | – | 156.2 | End Mill Shank | N/A | – | N/A |
ISCAR
SUMOCHAM (Head Replacement Type Drill Body) DCN-5D, Machining Diameter 6.0 mm–32.9 mm
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
21.0~21.9 | 105 | General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | – | 198.2 | End Mill Shank | N/A | – | N/A |
SANDVIK
CoroThread 266, Coromant Capto, Cutting Head, C-266RFAZ-16
NITTA
Urethane Tube U2 for General Air Pressures
NORELEM
Steel spur gears, module 1.5, milled toothing, straight-toothed, 20° engagement angle, Form A, with hub (22400)
NORELEM
Pin with head ISO 2341 Form B (07337-20)
FESTO
Plastic tubing, PUN Series
SMC
Guide Cylinder MG / Fine Lock Cylinder CLG1 / Cylinder With Lock CNG Packing Set
LAPP
EPIC® Contacts for circular connectors