Szűrési feltételek

Mindent töröl

Phoenix Head Replaceable Type Drills

An indexable drill is a drill with a replaceable tip attached to the tip of the drill. Drills are tools that perform drilling, which is indispensable for machining, however, if used for a long time, the cutting edge will wear. In this case, you must either grind the cutting edge to improve cutting performance, or replace the drill body before using it. With the indexable drill, if the cutting edge becomes worn, it is possible to replace only the insert at the tip instead of the drill body, so maintenance work time and cost reduction can be expected, especially when the machining diameter is large. There are many variations in the shape and size of the drill, and the shape and material of the tip to be mounted also vary. There are drills that can handle multiple inserts, and various work materials and holes can be machined.
  • Cam Drill (Replaceable-Head Drill Body) DCM-3D Processing Diameter 7.5 mm–25.9 mm

      ISCAR

      Cam Drill (Replaceable-Head Drill Body) DCM-3D Processing Diameter 7.5 mm–25.9 mm

      Machining Diameter: 7.5 mm to 25.9 mm
      További részletek
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      13.5 to 13.940General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○]106.5End Mill ShankN/AAvailable
      Normál ár (ÁFA nélkül):
      311.33 €
      Normál feladási dátum:
      8 munkanapok
      Konfigurálás
    • SUMOCHAM (Head Replacement Type Drill Body) DCN-3D, Machining Diameter 6.0 mm–32.9 mm

        ISCAR

        SUMOCHAM (Head Replacement Type Drill Body) DCN-3D, Machining Diameter 6.0 mm–32.9 mm

        Machining Diameter: 6.0 mm to 32.9 mm
        További részletek
        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
        13.5 to 13.941General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]106.1End Mill ShankN/AN/A
        Normál ár (ÁFA nélkül):
        349.46 €
        Normál feladási dátum:
        8 munkanapok
        Konfigurálás
      • SUMOCHAM (Head Replacement Type Drill Body) DCN-5D, Machining Diameter 6.0 mm–32.9 mm

          ISCAR

          SUMOCHAM (Head Replacement Type Drill Body) DCN-5D, Machining Diameter 6.0 mm–32.9 mm

          The cutting force increases the clamping force of the head, which enables stable machining, and is a part for free-cutting steelOCHAM that achieves good internal lubrication through the coolant hole at the tip of the holder.
          További részletek
          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
          13.5 to 13.968General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]133.1End Mill ShankN/AN/A
          Normál ár (ÁFA nélkül):
          399.75 €
          Normál feladási dátum:
          6 munkanapok
          Konfigurálás