Grooving / Cutting Off Holders
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Configure now
Starting from∗ ： 2,109.00 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Punching Blade KTKB-S Type
KYOCERA
P is a special breaker designed for automatic lathes and other low feeds. At feeds of 0.03 to 0.08 mm/rev the chips are small curls and excellent chip discharge performance is demonstrated.Configure nowStarting from∗ ： 113.24 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 232.95 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Min. Shipping Days ： 5 Days -
Outer Diameter Shallow Groove Holder KGBA Type
KYOCERA
[Features] This is a lever lock type holder that can be used for shallow recesses on outer diameters.Configure nowStarting from∗ ： 118.37 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Multi-Functional / Grooving (Cutting-Off) Chip GMM Type
KYOCERA
Sharp edge specification enables 40% reduction in cutting resistance from C surface specification.Configure nowStarting from∗ ： 19.09 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 2,109.00 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 3,798.54 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Cutter Holder TKN Type
KYOCERA
P is a special breaker designed for automatic lathes and other low feeds. At feeds of 0.03 to 0.08 mm/rev the chips are small curls and excellent chip discharge performance is demonstrated.Configure nowStarting from∗ ： 13.52 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 251.73 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 190.68 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Kyocera Mill Routing Tip Holder
KYOCERA
[Features]
· KGD-S type: Realizes high efficiency machining thanks to the excellent chip discharge performance and high rigidity holder.
[Applications]
· Holder for Grooving and Cutting OffConfigure nowStarting from∗ ： 155.37 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 1,382.62 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 4,419.69 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 432.62 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
SANDVIK Manual Clamping Unit
SANDVIK
[Specifications]
・Type: Clamping unit, Manually operated clamping unit
・Cutting Direction: Right-hand, Left-hand
・eClass-5.1: 21021103, 21021105
[Features]
・High torque transmission
・High bending strength
・Quick change and automated tool change
・Advanced nozzle technology for process security even at low pressures
・Through-tool delivery of high-pressure coolant, from machine to cutting edge
・Balanced and concentric
・Self-centeringConfigure nowMin. Shipping Days ： 5 Days -
Slit Tip GDM Type
KYOCERA
When groove machining is performed with PF and PM breakers (for parting), the groove bottom shape will not be flat.Configure nowStarting from∗ ： 19.72 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Tool Block for Holding Blade, KTKTB Type (Split Type)
KYOCERA
[Features]
A split tool block to hold a Kyocera blade.
[Features]
For fixing blades.Configure nowStarting from∗ ： 247.81 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
SANDVIK T-Max Q-Cut Blade for Parting
SANDVIK
[Specifications]
・Type: Blade insert, Cutting blade
・External or internal machining: External machining
・Cutting Direction: No-hand
・Bracket Clamping technology: Spring tension system
・eClass-5.1: 21011812Configure nowMin. Shipping Days ： 5 Days -
Configure now
Starting from∗ ： 2,284.38 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
SANDVIK VDI to Coromant Capto Clamping Unit
SANDVIK
[Specifications]
・Type: Clamping unit, Manually operated clamping unit, VDI basic holder
・Cutting Direction: Right-hand, Left-hand, No-hand
・eClass-5.1: 21021103
Quick change clamping units will optimize the machine utilization by reducing both set-up time and tool change time significantlyConfigure nowStarting from∗ ： 966.08 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 491.08 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
- Promotional pricing
Lathe Turning (Cutter) Bit GDM Model
KYOCERA
Conventional insert mounting to new holders is not recommended.Configure nowStarting from∗ ： 15.30 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Lathe Turning / Cutting Holder Main Body KGD-S Model (Straight Type: 0°, Parting Type)
KYOCERA
[Features] Machining applications: Grooving / parting off; holder angle (°): 0; type: modular type (blade); compatible tip: GDM, GDMS, GDG, GDGSConfigure nowStarting from∗ ： 126.73 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Multi-Functional / Grooving Holder KGM -T Type (Deep Grooving Type)
KYOCERA
If using GMG/GMM type (2-cornered) inserts, set the maximum grooving depth to 15 mm.Configure nowStarting from∗ ： 127.36 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 56.83 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Inner Diameter Groove SIGE-EH Type Excellent Bar (with Coolant Hole)
KYOCERA
[Features] Machining applications: Grooving; Holder angle (°): 90; Lubrication hole (oil hole): yes; Screw clamp allows good chip evacuation.Configure nowStarting from∗ ： 144.07 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 19.72 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Grooved End Face Blade KGDF Type
KYOCERA
[Features] Machining applications: Flanges, blind holes; compatible insert shape: non-ISO standard; clamping method: non-ISO standard.Configure nowStarting from∗ ： 116.67 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
![Small Diameter End Face Grooving Holder [for GVF-AA Chip] Model GFVS - AA](//uk.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304661.jpg?$product_view_b$)
Small Diameter End Face Grooving Holder [for GVF-AA Chip] Model GFVS - AA
KYOCERA
[Features] Compatible insert shape: Non-ISO standard; Clamping method: Clamp-On (C); Clamping method: Clamp-On (C)Configure nowStarting from∗ ： 236.61 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 33.38 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Lathe Turning / Cutting Holder KGD Model (Combination)
KYOCERA
If the holder is used as a positive tool, the holder jaw could interfere with the tool presetter.Configure nowStarting from∗ ： 125.47 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Tool Block for Holding Blade, KTKTBF Type (Split Type / Perpendicular Type)
KYOCERA
KTKTBF type blade holding tool block from Tsukkiru.
[Compatible blade]KTKB/KFTB32Configure nowStarting from∗ ： 216.96 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
T-Max Q-Cut Plunging / Grooving Shank Bit
SANDVIK
A parting and grooving tool that improves part production capacity through high productivity and long tool life.Configure nowStarting from∗ ： 190.68 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 253.26 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
CoroCut Reinforced Shank Tool Bit For Parting With Small 1 / 2 f1 Offset, R / LF123
SANDVIK
[Features]
A high clamp rigidity type shank holder for parting and grooving.
Securely receives lateral cutting forces using the unique rail lock seat and V-shaped seat, delivering a high level of safety. (Patented)
The holder strength is high thanks to the jaw.
For parting and grooving.Configure nowStarting from∗ ： 219.66 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Holder For Cut-Off, CTPA
NGK SPARK PLUG
[Features]
Front/back clamping type holder for parting-off turning.
[Cutting Direction]You can choose from 2 types, left-hand or right-hand.
[Applications]
Suitable for parting-off machining.Configure nowStarting from∗ ： 144.40 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 4,641.85 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 165.15 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 378.54 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Configure now
Min. Shipping Days ： 5 Days -
Configure now
Starting from∗ ： 2,109.00 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 2,109.00 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 786.31 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 578.77 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
![Small Diameter End Face Grooving Holder [for GVF-AA Chip] Model GFVS - AA](http://uk.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304661.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days |
| Application |
| Groove Width(mm) |
| Maximum Machining Diameter(mm) |
| Maximum Groove Depth(mm) |
| Cutting Direction |
| Number of corners for tip use |
| Shank height(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | SANDVIK | KYOCERA | SANDVIK | SANDVIK | KYOCERA | KYOCERA | SANDVIK | SANDVIK | KYOCERA | SANDVIK | SANDVIK | KYOCERA | SANDVIK | SANDVIK | SANDVIK | SANDVIK | KYOCERA | KYOCERA | SANDVIK | SANDVIK | SANDVIK | SANDVIK | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | SANDVIK | SANDVIK | SANDVIK | NGK SPARK PLUG | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK |
| Product Series | Sandvik, CoroCut 1/2, QS Shank Tool Bit, Parting-off and Grooving, QS-R/LF123 | Lathe Turning / Cutting Holder Main Body KGD-S Model (Straight Type: 0°, Parting Type) | Multi-Functional / Grooving Holder KGM -T Type (Deep Grooving Type) | Inner Diameter Groove SIGE-EH Type Excellent Bar (with Coolant Hole) | Multi-Functional / Inner Diameter Grooving Holder (KIGM-V Type) | Small Diameter End Face Grooving Holder [for GVF-AA Chip] Model GFVS - AA | Tool Block for Holding Blade, KTKTBF Type (Split Type / Perpendicular Type) | T-Max Q-Cut SL (Type 151.3) Blade For Internal Diameter Grooving And Profiling 570-R / L | CoroCut Reinforced Shank Tool Bit For Parting With Small 1 / 2 f1 Offset, R / LF123 | ||||||||||||||||||||||||||||||||||||
| Starting from∗ | 2,109.00 € *Unit price with basic configuration | 113.24 € *Unit price with basic configuration | 232.95 € *Unit price with basic configuration | - | 118.37 € *Unit price with basic configuration | 19.09 € *Unit price with basic configuration | 2,109.00 € *Unit price with basic configuration | 3,798.54 € *Unit price with basic configuration | 13.52 € *Unit price with basic configuration | 251.73 € *Unit price with basic configuration | 190.68 € *Unit price with basic configuration | 155.37 € *Unit price with basic configuration | 1,382.62 € *Unit price with basic configuration | 4,419.69 € *Unit price with basic configuration | 432.62 € *Unit price with basic configuration | - | 19.72 € *Unit price with basic configuration | 247.81 € *Unit price with basic configuration | - | 2,284.38 € *Unit price with basic configuration | 966.08 € *Unit price with basic configuration | 491.08 € *Unit price with basic configuration | 15.30 € Special price *Unit price with basic configuration Promotional pricing | 126.73 € *Unit price with basic configuration | 127.36 € *Unit price with basic configuration | 56.83 € *Unit price with basic configuration | 144.07 € *Unit price with basic configuration | 19.72 € *Unit price with basic configuration | 116.67 € *Unit price with basic configuration | 236.61 € *Unit price with basic configuration | 33.38 € *Unit price with basic configuration | 125.47 € *Unit price with basic configuration | 216.96 € *Unit price with basic configuration | 190.68 € *Unit price with basic configuration | 253.26 € *Unit price with basic configuration | 219.66 € *Unit price with basic configuration | 144.40 € *Unit price with basic configuration | 4,641.85 € *Unit price with basic configuration | 165.15 € *Unit price with basic configuration | 378.54 € *Unit price with basic configuration | - | 2,109.00 € *Unit price with basic configuration | 2,109.00 € *Unit price with basic configuration | 786.31 € *Unit price with basic configuration | 578.77 € *Unit price with basic configuration |
| Min. Shipping Days | 5 Days | 6 Days | 6 Days | 5 Days | 6 Days | 6 Days | 5 Days | 5 Days | 6 Days | 6 Days | 6 Days | 6 Days | 5 Days | 5 Days | 5 Days | 5 Days | 6 Days | 6 Days | 5 Days | 5 Days | 5 Days | 5 Days | Same day | 6 Days | 6 Days | 8 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 8 Days | 8 Days | 6 Days | 6 Days | 6 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days |
| Application | - | - | Outer Diameter Grooving / Cutting off | - | - | - | - | - | - | Outer Diameter Grooving / Cutting off | Outer Diameter Grooving / Cutting off / Profiling | Cutting off | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Outer Diameter Grooving / Cutting off / Profiling | Inner Diameter Grooving / Profiling | Outer Diameter Grooving / Cutting off | Cutting off | - | - | - | - | - | - | - | - |
| Groove Width(mm) | - | - | 2 ～ 15 | - | - | - | - | - | - | 1.5 ～ 3 | 1.5 ～ 15 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2 ～ 6 | 3 ～ 8 | 2 ～ 4 | - | - | - | - | - | - | - | - | - |
| Maximum Machining Diameter(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 16 | - | - | - | - | - | - | 60 ～ 2000 | - |
| Maximum Groove Depth(mm) | - | - | 20 ～ 120 | - | - | - | - | - | - | - | 8 ～ 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 15 ～ 32 | 8 ～ 13 | 17 ～ 22 | - | - | - | - | - | - | - | 20 ～ 28 | - |
| Cutting Direction | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | Right-hand / Left-hand | No-hand | Right-hand / Left-hand | No-hand | - | Right-hand / Left-hand | Right-hand / Left-hand / No-hand | - | Right-hand / Left-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand / No-hand | - | No-hand | Right-hand / Left-hand / No-hand | Right-hand / Left-hand / No-hand | No-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand | Right-hand / Left-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | - | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | - | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand / No-hand |
| Number of corners for tip use | - | - | 1 Corner / 2 Corner | - | - | - | - | - | - | 2 Corner | 1 Corner / 2 Corner | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1 Corner | 1 Corner | 2 Corner | - | - | - | - | - | - | - | - | - |
| Shank height(mm) | - | - | 25.9 ～ 101.6 | - | - | - | - | - | - | 10 ～ 16 | 10 ～ 40 | - | 40 | - | - | 80 ～ 208 | - | - | 17.48 ～ 79.5 | - | 30 ～ 60 | - | - | - | - | - | - | - | - | - | - | - | - | 16 ～ 32 | - | 20 ～ 25 | - | - | - | - | - | - | - | - | 12 ～ 32 |
![Small Diameter End Face Grooving Holder [for GVF-AA Chip] Model GFVS - AA](http://uk.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304661.jpg?$product_view_c$)
Loading...
Filter by:
Stock
-
- Show only stock items
-
Application
-
Groove Width(mm)
- 0.30 to 3.00
- 0.5-3.18
- 0.50 to 2.00
- 0.7-2.0
- 1.00 to 2.00
- 1.00 to 2.49
- 1.45 to 3.00
- 1.5
- 1.50 to 2.00
- 1.75 to 2.00
- 2
- 2.0 to 2.5
- 2.00 to 3.49
- 2.5
- 2.50 to 3.00
- 2.65
- 3
- 3.00 to 3.50
- 3.17
- 3.50 to 5.50
- 4
- 4.00 to 5.90
- 4.75
- 5
- 5(6)
- 6
- 6.00 to 7.90
- 6.35
- 8
- 8.00 to 9.00
- 9
- 10
- 11
- 12
- 15
-
Maximum Machining Diameter(mm)
-
Maximum Groove Depth(mm)
-
Cutting Direction
-
Number of corners for tip use
-
Shank height(mm)
CAD data type
-
- 2D
- 3D
Categories related to Grooving / Cutting Off Holders
Fizetési mód
Átutalás
Előre fizetés
Igény szerinti gyártás
Tanúsítványok
Copyright © MISUMI Corporation Minden jog fenntartva.