Szűrési feltételek

Mindent töröl

  • Készlet
  • Blade diameter (D)(φ)
    [2.7–3/0.01φ egység]
    [3.15–3.5/0.01φ egység]
    [3.6–4/0.01φ egység]
    [4.05–16/0.01φ egység]
    [17–19.99/0.01φ egység]
    [20.01–22.99/0.01φ egység]
    [24–25/0.01φ egység]
  • Blade length (ℓ)(mm)
  • work material
  • Blade shape type
  • Number of flutes(sheet)
  • Tool Material Type
  • Square End Mills (HSS) (Torsion Angle (θ): Standard Helix (30˚ to 40˚))

      • Super Hard, 2-Flute 2SE
        • Volume Discount

        NACHI(FUJIKOSHI)

        Super Hard, 2-Flute 2SE

        General-purpose end-mill that performs machining of workpiece materials from carbon steel and stainless steel to aluminum.
        További részletek
        Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
        1 ~ 502 ~ 70General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square2Cobalt HSSPlane / Side / Groove / Inclined Cuts6 ~ 42Non-Coated
        Normál ár (ÁFA nélkül):
        31.37 €
        Normál feladási dátum:
        6 munkanapok
        Konfigurálás
      • Multi-Flute Extra Long EXML
        • Volume Discount

        OSG

        Multi-Flute Extra Long EXML

        30°- 45° helix angle, cobalt high-speed steel, extra long type end mill.
        További részletek
        Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
        3 ~ 4030 ~ 150General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square4Cobalt HSSPlane / Side / Groove / Inclined Cuts6 ~ 32Non-Coated
        Normál ár (ÁFA nélkül):
        28.84 €
        Normál feladási dátum:
        6 munkanapok
        Konfigurálás
      • LVS4T 4-Flute Blade Long Blade
        • Volume Discount

        SANKO MFG

        LVS4T 4-Flute Blade Long Blade

        A 4-flute end mill for finish machining. Enables a wide range of side machining and deep engraving, due to the long flute length.
        További részletek
        Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
        3 ~ 3230 ~ 200General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]Square4Cobalt HSSPlane / Side6 ~ 32Non-Coated
        Normál ár (ÁFA nélkül):
        45.78 €
        Normál feladási dátum:
        6 munkanapok
        Konfigurálás
      • AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Long
        • Volume Discount
        • AS
        • 2 Flutes
        • L (Long)

        MISUMI

        AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Long

        [Features] -High-speed steel powder with square long blade length, which is expected to last long-Suitable for deep cavity milling-It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
        További részletek
        Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
        3 ~ 2015 ~ 75General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square2Powder high-speed steelPlane / Side / Groove / Countersinking6 ~ 20For High Hardness (Silicon Group)
        Normál ár (ÁFA nélkül):
        31.08 €
        Normál feladási dátum:
        5 munkanapok
        Konfigurálás
      • TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Short
        • Volume Discount
        • TiCN
        • 4 Flutes
        • S (Short)

        MISUMI

        TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Short

        Powdered HSS with high durability is available more cheaply than the cobalt HSS market price
        További részletek
        Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
        3 ~ 258 ~ 45General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square4Powder high-speed steelPlane / Side / Groove / Countersinking6 ~ 25TiCN
        Normál ár (ÁFA nélkül):
        19.10 €
        Normál feladási dátum:
        5 munkanapok
        Konfigurálás
      • 2-Flute General Use, Short EDS
        • AKCIÓ eddig: 23.03.2025
        • Volume Discount

        OSG

        2-Flute General Use, Short EDS

        High speed steel square series.Tool material: Cobalt high speed steel, Working material: General steel/stainless steel/cast iron/aluminium/copperCoating: Uncoated, Standard/Alteration category: Manufacturer's standard product, Number of flutes (pcs.): 2Zerration angle: Standard helix (30 to 44°).
        További részletek
        Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
        0.45 ~ 601.1 ~ 80General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square2Cobalt HSSPlane / Side / Groove / Inclined Cuts6 ~ 42Non-Coated
        Normál ár (ÁFA nélkül):
        15.46 €
        Normál ár (ÁFA nélkül):
        Speciális ár
        Normál feladási dátum:
        Raktári cikk - 1 munkanap
        Egyes tételeket még aznap fel lehet adni
        Konfigurálás
      • 3S End Mill, 6-Flute Extra Long Blade

          FUKUDA

          3S End Mill, 6-Flute Extra Long Blade

          Long blade for cutting such as deep grooving and wide widths Repolishing is easy
          További részletek
          Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
          50 ~ 60150 ~ 300Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]Square6Alloy HSSPlane / Side / Groove42Non-Coated
          Normál ár (ÁFA nélkül):
          1,181.82 €
          Normál feladási dátum:
          6 munkanapok
          Konfigurálás
        • High-Speed Steel Square End Mill, 2-Flute / Short / Non-Coated Model
          • Volume Discount
          • Non-Coated
          • 2 Flutes
          • S (Short)

          MISUMI

          High-Speed Steel Square End Mill, 2-Flute / Short / Non-Coated Model

          [Features] -Quick-action steel uncoated, square, short, 2-bladed with up to ø50-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
          További részletek
          Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
          1 ~ 502.5 ~ 75General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square2Cobalt HSSPlane / Side / Groove / Countersinking6 ~ 42Non-Coated
          Normál ár (ÁFA nélkül):
          10.56 €
          Normál feladási dátum:
          5 munkanapok
          Konfigurálás
        • G Standard End Mill, 2-Flute 2GE
          • Volume Discount

          NACHI(FUJIKOSHI)

          G Standard End Mill, 2-Flute 2GE

          General-purpose coated end-mill that performs machining of workpiece materials from carbon steel and stainless steel to aluminum.
          További részletek
          Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
          1.3 ~ 503 ~ 70General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]Square2Cobalt HSSPlane / Side / Groove / Inclined Cuts6 ~ 42TiN
          Normál ár (ÁFA nélkül):
          40.60 €
          Normál feladási dátum:
          6 munkanapok
          Konfigurálás
        • Multi-Flute Center Cut Short CC-EMS
          • Volume Discount

          OSG

          Multi-Flute Center Cut Short CC-EMS

          Cobalt high speed steel centre cut.Tool material: Cobalt high speed steel, Working material: General steel/stainless steel/cast iron/aluminium/copperCoating: Uncoated, Standard/ageing category: Manufacturer's standard product, Number of flutes (pcs.): 4Skew angle: standard spiral (30 to 44°).
          További részletek
          Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
          2.5 ~ 4010 ~ 65General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square4Cobalt HSSPlane / Side / Groove / Inclined Cuts6 ~ 32Non-Coated
          Normál ár (ÁFA nélkül):
          16.82 €
          Normál feladási dátum:
          6 munkanapok
          Konfigurálás
        • End Mill (Multi-Flute Long-Shank Long Type), LS-EML
          • Volume Discount

          OSG

          End Mill (Multi-Flute Long-Shank Long Type), LS-EML

          General purpose 4 flute cutter with long shank made of cobalt high speed steel as base material. Suitable for deep cuts.
          További részletek
          Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
          10 ~ 4045 ~ 110General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square4Cobalt HSSPlane / Side / Groove / Inclined Cuts10 ~ 32Non-Coated
          Normál ár (ÁFA nélkül):
          32.54 €
          Normál feladási dátum:
          6 munkanapok
          Konfigurálás
        • XPM End Mill, (2-Flute Short Type), XPM-EDS
          • Volume Discount

          OSG

          XPM End Mill, (2-Flute Short Type), XPM-EDS

          2 flute short cutter with powder metal high speed steel XPM as base material.
          További részletek
          Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
          0.8 ~ 402 ~ 65General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square2Powder high-speed steelPlane / Side / Groove / Inclined Cuts6 ~ 32Non-Coated
          Normál ár (ÁFA nélkül):
          22.83 €
          Normál feladási dátum:
          6 munkanapok
          Konfigurálás
        • XPM End Mill (Multi-Flute Long Type), XPM-EML
          • Volume Discount

          OSG

          XPM End Mill (Multi-Flute Long Type), XPM-EML

          Multi-flute end mill in long version made of powder metal high-speed steel XPM as basic material. Suitable for deep cuts.
          További részletek
          Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
          3 ~ 4015 ~ 110General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square4Powder high-speed steelPlane / Side / Groove / Inclined Cuts6 ~ 32Non-Coated
          Normál ár (ÁFA nélkül):
          30.34 €
          Normál feladási dátum:
          6 munkanapok
          Konfigurálás
        • End Mill (2-Flute Short Type for Aluminum), AL-EDS
          • AKCIÓ eddig: 23.03.2025
          • Volume Discount

          OSG

          End Mill (2-Flute Short Type for Aluminum), AL-EDS

          Short 2-flute cutter for aluminium alloys using cobalt high-speed steel as base material.
          További részletek
          Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
          1.5 ~ 304 ~ 55Aluminum[◎] / Copper[○] / Resin[○]Square2Cobalt HSSPlane / Side / Groove / Inclined Cuts6 ~ 25Non-Coated
          Normál ár (ÁFA nélkül):
          16.82 €
          Normál ár (ÁFA nélkül):
          Speciális ár
          Normál feladási dátum:
          Raktári cikk - 1 munkanap
          Egyes tételeket még aznap fel lehet adni
          Konfigurálás
        • 3S End Mill, 2-Flute (Standard Blade)
          • AKCIÓ eddig: 23.03.2025
          • Volume Discount

          FUKUDA

          3S End Mill, 2-Flute (Standard Blade)

          Wide range of blade lengths and an abundance of sizes
          További részletek
          Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
          0.8 ~ 1002 ~ 80Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]Square2Alloy HSSPlane / Side / Groove / Plunging (Z feed)6 ~ 42Non-Coated
          Normál ár (ÁFA nélkül):
          29.66 €
          Normál ár (ÁFA nélkül):
          Speciális ár
          Normál feladási dátum:
          Raktári cikk - 1 munkanap
          Egyes tételeket még aznap fel lehet adni
          Konfigurálás
        • 3S End Mill, 2-Flute Long Blade

            FUKUDA

            3S End Mill, 2-Flute Long Blade

            Long blade for deep grooving such as die engraving and wide carving Abundant variety of sizes
            További részletek
            Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
            3 ~ 5015 ~ 120Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]Square2Alloy HSSPlane / Side / Groove / Plunging (Z feed)6 ~ 42Non-Coated
            Normál ár (ÁFA nélkül):
            43.96 €
            Normál feladási dátum:
            6 munkanapok
            Konfigurálás
          • 3S End Mill, 2-Flute Extra Long Blade
            • AKCIÓ eddig: 23.03.2025
            • Volume Discount

            FUKUDA

            3S End Mill, 2-Flute Extra Long Blade

            Long blade for deep grooving such as die engraving and wide carving Abundant variety of sizes
            További részletek
            Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
            0.8 ~ 602.5 ~ 300Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]Square2Alloy HSSPlane / Side / Groove / Plunging (Z feed)6 ~ 42Non-Coated
            Normál ár (ÁFA nélkül):
            43.96 €
            Normál ár (ÁFA nélkül):
            Speciális ár
            Normál feladási dátum:
            Raktári cikk - 1 munkanap
            Egyes tételeket még aznap fel lehet adni
            Konfigurálás
          • 3S End Mill, 4-Flute (Standard Blade)
            • Volume Discount

            FUKUDA

            3S End Mill, 4-Flute (Standard Blade)

            Side cutting and groove re-polishing are easy
            További részletek
            Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
            3 ~ 10013 ~ 80Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]Square4Alloy HSSPlane / Side / Groove6 ~ 42Non-Coated
            Normál ár (ÁFA nélkül):
            37.99 €
            Normál feladási dátum:
            6 munkanapok
            Konfigurálás
          • VS2T 2-Flute Short

              SANKO MFG

              VS2T 2-Flute Short

              A 2-flute end mill for finishing.Materials: HS-Co (cobalt high-speed steel)Outer diameter tolerance: -0.03 to 0Helix angle: 30°Cutting tip shape: Sharp corner.
              További részletek
              Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
              2.5 ~ 31.96 ~ 60General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]Square2Cobalt HSSPlane / Side / Groove / Inclined Cuts6 ~ 32Non-Coated
              Normál ár (ÁFA nélkül):
              31.48 €
              Normál feladási dátum:
              6 munkanapok
              Konfigurálás
            • AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Short
              • Volume Discount
              • AS
              • 2 Flutes
              • S (Short)

              MISUMI

              AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Short

              [Features] -High speed steel powder square short blade length 2-flute type, which can expect for durability-It has coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, performance range, prices, etc.
              További részletek
              Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
              1 ~ 402.5 ~ 65General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square2Powder high-speed steelPlane / Side / Groove / Countersinking6 ~ 32For High Hardness (Silicon Group)
              Normál ár (ÁFA nélkül):
              27.51 €
              Normál feladási dátum:
              5 munkanapok
              Konfigurálás
            • AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Regular
              • Volume Discount
              • AS
              • 2 Flutes
              • R (Regular)

              MISUMI

              AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Regular

              [Features] -High-speed steel powder square regular blade length 2-flute type, which can expect for durability-It has coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, performance range, prices, etc.
              További részletek
              Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
              1 ~ 253.5 ~ 60General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square2Powder high-speed steelPlane / Side / Groove / Countersinking6 ~ 25For High Hardness (Silicon Group)
              Normál ár (ÁFA nélkül):
              28.54 €
              Normál feladási dátum:
              5 munkanapok
              Konfigurálás
            • AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Short
              • Volume Discount
              • AS
              • 4 Flutes
              • S (Short)

              MISUMI

              AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Short

              AS coating with excellent wear resistance achieves the high-precision finish even in prolonged processing
              További részletek
              Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
              3 ~ 258 ~ 45General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square4Powder high-speed steelPlane / Side / Groove / Countersinking6 ~ 25For High Hardness (Silicon Group)
              Normál ár (ÁFA nélkül):
              29.26 €
              Normál feladási dátum:
              5 munkanapok
              Konfigurálás
            • AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Regular
              • Volume Discount
              • AS
              • 4 Flutes
              • R (Regular)

              MISUMI

              AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Regular

              [Features] -Achieves high resistance in a variety of materials, from raw materials to heat-treated steel-It has a coating with high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
              További részletek
              Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
              3 ~ 2512 ~ 68General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square4Powder high-speed steelPlane / Side / Groove / Countersinking6 ~ 25For High Hardness (Silicon Group)
              Normál ár (ÁFA nélkül):
              31.38 €
              Normál feladási dátum:
              5 munkanapok
              Konfigurálás
            • AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Long
              • Volume Discount
              • AS
              • 4 Flutes
              • L (Long)

              MISUMI

              AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Long

              [Features] -Achieves high resistance in a wide range of materials, from raw materials to heat-treated steel-It has a coating with high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
              További részletek
              Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
              3 ~ 2515 ~ 90General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square4Powder high-speed steelPlane / Side / Groove / Countersinking6 ~ 25For High Hardness (Silicon Group)
              Normál ár (ÁFA nélkül):
              33.05 €
              Normál feladási dátum:
              5 munkanapok
              Konfigurálás
            • TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Short
              • Volume Discount
              • TiCN
              • 2 Flutes
              • S (Short)

              MISUMI

              TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Short

              [Features] -High-speed steel powder for roughing with short flute length expected to last long-Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
              További részletek
              Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
              1 ~ 402.5 ~ 65General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Copper[○]Square2Powder high-speed steelPlane / Side / Groove / Countersinking6 ~ 32TiCN
              Normál ár (ÁFA nélkül):
              23.33 €
              Normál feladási dátum:
              5 munkanapok
              Konfigurálás
            • TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Regular
              • Volume Discount
              • TiCN
              • 2 Flutes
              • R (Regular)

              MISUMI

              TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Regular

              [Features] -High speed steel powder for roughing with regular flute length expected to last long-Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
              További részletek
              Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
              1 ~ 253.5 ~ 60General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Copper[○]Square2Powder high-speed steelPlane / Side / Groove / Countersinking6 ~ 25TiCN
              Normál ár (ÁFA nélkül):
              25.29 €
              Normál feladási dátum:
              5 munkanapok
              Konfigurálás
            • TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Long
              • Volume Discount
              • TiCN
              • 2 Flutes
              • L (Long)

              MISUMI

              TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Long

              [Features] -High-speed steel powder roughing cutter with long flute length expected to last a long time-Suitable for milling deep cavities-Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
              További részletek
              Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
              3 ~ 2515 ~ 90General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Copper[○]Square2Powder high-speed steelPlane / Side / Groove / Countersinking6 ~ 25TiCN
              Normál ár (ÁFA nélkül):
              18.22 €
              Normál feladási dátum:
              5 munkanapok
              Konfigurálás
            • TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Regular
              • Volume Discount
              • TiCN
              • 4 Flutes
              • R (Regular)

              MISUMI

              TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Regular

              [Features] -High speed steel powder grinding wheel with regular flute length and 4 flutes expected to last a long time-Coating with excellent lubricity for wet machining and machining at cutting speeds of 40 m/min or less-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
              További részletek
              Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
              3 ~ 2512 ~ 68General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square4Powder high-speed steelPlane / Side / Groove / Countersinking6 ~ 25TiCN
              Normál ár (ÁFA nélkül):
              19.10 €
              Normál feladási dátum:
              5 munkanapok
              Konfigurálás
            • TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute / Regular
              • Volume Discount
              • TiCN
              • 4 Flutes
              • L (Long)

              MISUMI

              TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute / Regular

              [Features] -High speed steel powder roughing cutter with long flute length and 4 flutes expected to last a long time-Suitable for deep cavity milling-Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
              További részletek
              Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
              3 ~ 2515 ~ 90General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square4Powder high-speed steelPlane / Side / Groove / Countersinking6 ~ 25TiCN
              Normál ár (ÁFA nélkül):
              19.10 €
              Normál feladási dátum:
              5 munkanapok
              Konfigurálás
            • AS Coated High-Speed Steel Square End Mill, 2-Flute, Short
              • Volume Discount
              • AS
              • 2 Flutes
              • S (Short)

              MISUMI

              AS Coated High-Speed Steel Square End Mill, 2-Flute, Short

              [Features] -The coating has high oxidation resistance and high hardness and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
              További részletek
              Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
              1 ~ 502.5 ~ 75General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square2Cobalt HSSPlane / Side / Groove / Countersinking6 ~ 42For High Hardness (Silicon Group)
              Normál ár (ÁFA nélkül):
              20.04 €
              Normál feladási dátum:
              5 munkanapok
              Konfigurálás
            • AS Coated High-Speed Steel Square End Mill, 2-Flute / Regular
              • Volume Discount
              • AS
              • 2 Flutes
              • R (Regular)

              MISUMI

              AS Coated High-Speed Steel Square End Mill, 2-Flute / Regular

              [Features] -The coating has high oxidation resistance and high hardness and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application methods, range of services, prices, etc.
              További részletek
              Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
              1 ~ 253.5 ~ 60General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square2Cobalt HSSPlane / Side / Groove / Countersinking6 ~ 25For High Hardness (Silicon Group)
              Normál ár (ÁFA nélkül):
              20.63 €
              Normál feladási dátum:
              5 munkanapok
              Konfigurálás
            • AS Coated High-Speed Steel Square End Mill, 2-Flute / Long
              • Volume Discount
              • AS
              • 2 Flutes
              • L (Long)

              MISUMI

              AS Coated High-Speed Steel Square End Mill, 2-Flute / Long

              [Features] -Suitable for milling deep cavities-It has a coating with high oxidation resistance and high hardness, and achieves long life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
              További részletek
              Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
              3 ~ 4015 ~ 110General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square2Cobalt HSSPlane / Side / Groove / Countersinking6 ~ 32For High Hardness (Silicon Group)
              Normál ár (ÁFA nélkül):
              23.44 €
              Normál feladási dátum:
              5 munkanapok
              Konfigurálás
            • AS Coated High-Speed Steel Square End Mill, 4-Flute / Short
              • Volume Discount
              • AS
              • 4 Flutes
              • S (Short)

              MISUMI

              AS Coated High-Speed Steel Square End Mill, 4-Flute / Short

              [Features] -The coating has high oxidation resistance and high hardness and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
              További részletek
              Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
              3 ~ 408 ~ 65General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square4Cobalt HSSPlane / Side / Groove / Countersinking6 ~ 32For High Hardness (Silicon Group)
              Normál ár (ÁFA nélkül):
              22.17 €
              Normál feladási dátum:
              5 munkanapok
              Konfigurálás
            • AS Coated High-Speed Steel Square End Mill, 4-Flute / Regular
              • Volume Discount
              • AS
              • 4 Flutes
              • R (Regular)

              MISUMI

              AS Coated High-Speed Steel Square End Mill, 4-Flute / Regular

              [Features] -The coating has high oxidation resistance and high hardness and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for information on application methods, range of services, prices, etc.
              További részletek
              Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
              3 ~ 3012 ~ 68General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square4Cobalt HSSPlane / Side / Groove / Countersinking6 ~ 25For High Hardness (Silicon Group)
              Normál ár (ÁFA nélkül):
              23.56 €
              Normál feladási dátum:
              5 munkanapok
              Konfigurálás
            • AS Coated High-Speed Steel Square End Mill, 4-Flute / Long
              • Volume Discount
              • AS
              • 4 Flutes
              • L (Long)

              MISUMI

              AS Coated High-Speed Steel Square End Mill, 4-Flute / Long

              [Features] -Suitable for deep cavity milling-It has a coating with high oxidation resistance and high hardness and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for information on application methods, range of services, prices, etc.
              További részletek
              Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
              3 ~ 4015 ~ 110General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square4Cobalt HSSPlane / Side / Groove / Countersinking6 ~ 32For High Hardness (Silicon Group)
              Normál ár (ÁFA nélkül):
              26.77 €
              Normál feladási dátum:
              5 munkanapok
              Konfigurálás
            • Powdered High-Speed Steel Square End Mill, 2-Flute, Short / Non-Coated Model
              • Volume Discount
              • Non-Coated
              • 2 Flutes
              • S (Short)

              MISUMI

              Powdered High-Speed Steel Square End Mill, 2-Flute, Short / Non-Coated Model

              [Features] -High speed steel powder, square, uncoated, short flute length, 2 flute type, which promises long life-Can be reground. Please refer to the "Regrinding Service" page for details on how to proceed, what services you can avail of, prices, etc.
              További részletek
              Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
              1 ~ 402.5 ~ 65General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square2Powder high-speed steelPlane / Side / Groove / Countersinking6 ~ 32Non-Coated
              Normál ár (ÁFA nélkül):
              18.92 €
              Normál feladási dátum:
              5 munkanapok
              Konfigurálás
            • Powdered High-Speed Steel Square End Mill, 2-Flute / Regular / Non-Coated Model
              • Volume Discount
              • Non-Coated
              • 2 Flutes
              • R (Regular)

              MISUMI

              Powdered High-Speed Steel Square End Mill, 2-Flute / Regular / Non-Coated Model

              [Features] -High speed steel powder square uncoated regular flute length 2-flute type, which can expect for durability-Can be reground. Please refer to the "Regrinding Service" page for details on how to proceed, what services you can avail of, prices, etc.
              További részletek
              Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
              1 ~ 253.5 ~ 60General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square2Powder high-speed steelPlane / Side / Groove / Countersinking6 ~ 25Non-Coated
              Normál ár (ÁFA nélkül):
              19.98 €
              Normál feladási dátum:
              5 munkanapok
              Konfigurálás
            • Powdered High-Speed Steel Square End Mill, 2-Flute, Long / Non-Coated Model
              • Volume Discount
              • Non-Coated
              • 2 Flutes
              • L (Long)

              MISUMI

              Powdered High-Speed Steel Square End Mill, 2-Flute, Long / Non-Coated Model

              [Features] -Uncoated long flute 2 flute type of high speed steel powder square which can expect for durability-Suitable for deep cavity milling-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
              További részletek
              Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
              3 ~ 2515 ~ 90General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square2Powder high-speed steelPlane / Side / Groove / Countersinking6 ~ 25Non-Coated
              Normál ár (ÁFA nélkül):
              23.76 €
              Normál feladási dátum:
              5 munkanapok
              Konfigurálás
            • Powdered High-Speed Steel Square End Mill, 4-Flute / Short / Non-Coated Model
              • Volume Discount
              • Non-Coated
              • 4 Flutes
              • S (Short)

              MISUMI

              Powdered High-Speed Steel Square End Mill, 4-Flute / Short / Non-Coated Model

              [Features] -High speed steel powder, square, uncoated, short flute length, 4 flute type, which promises long life-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
              További részletek
              Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
              3 ~ 258 ~ 45General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square4Powder high-speed steelPlane / Side / Groove / Countersinking6 ~ 25Non-Coated
              Normál ár (ÁFA nélkül):
              21.82 €
              Normál feladási dátum:
              5 munkanapok
              Konfigurálás
            • Powdered High-Speed Steel Square End Mill, 4-Flute / Regular / Non-Coated Model
              • Volume Discount
              • Non-Coated
              • 4 Flutes
              • R (Regular)

              MISUMI

              Powdered High-Speed Steel Square End Mill, 4-Flute / Regular / Non-Coated Model

              [Features] -High speed steel powder square uncoated regular flute length 4 flute type which can be expected for durability-Can be reground. Please refer to the "Regrinding Service" page for how to proceed, what services you can avail, prices, etc.
              További részletek
              Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
              3 ~ 2512 ~ 68General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square4Powder high-speed steelPlane / Side / Groove / Countersinking6 ~ 25Non-Coated
              Normál ár (ÁFA nélkül):
              22.54 €
              Normál feladási dátum:
              5 munkanapok
              Konfigurálás
            • Powdered High-Speed Steel Square End Mill, 4-Flute / Regular / Non-Coated Model
              • Volume Discount
              • Non-Coated
              • 4 Flutes
              • L (Long)

              MISUMI

              Powdered High-Speed Steel Square End Mill, 4-Flute / Regular / Non-Coated Model

              [Features] -Powdered high-speed steel, square, uncoated, long flute length, 4-flute type, which is expected to last a long time-Suitable for milling deep cavities-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, performance range, prices, etc.
              További részletek
              Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
              3 ~ 2515 ~ 90General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square4Powder high-speed steelPlane / Side / Groove / Countersinking6 ~ 25Non-Coated
              Normál ár (ÁFA nélkül):
              26.12 €
              Normál feladási dátum:
              5 munkanapok
              Konfigurálás
            • High-Speed Steel Square End Mill, 2-Flute / Regular / Non-Coated Model
              • Volume Discount
              • Non-Coated
              • 2 Flutes
              • R (Regular)

              MISUMI

              High-Speed Steel Square End Mill, 2-Flute / Regular / Non-Coated Model

              [Features] -High-speed steel uncoated, square, normal blade length, 2-groove type with up to ø50-Can be reground. Please refer to the "Regrinding Service" page for details on how to proceed, what services you can avail of, prices etc.
              További részletek
              Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
              1 ~ 253.5 ~ 60General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square2Cobalt HSSPlane / Side / Groove / Countersinking6 ~ 25Non-Coated
              Normál ár (ÁFA nélkül):
              11.31 €
              Normál feladási dátum:
              5 munkanapok
              Konfigurálás
            • High-Speed Steel Square End Mill, 2-Flute / Long / Non-Coated Model
              • Volume Discount
              • Non-Coated
              • 2 Flutes
              • L (Long)

              MISUMI

              High-Speed Steel Square End Mill, 2-Flute / Long / Non-Coated Model

              [Features] -High speed steel uncoated, square, long flutes, 2 flute type with up to ø50-Suitable for deep cavity milling-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
              További részletek
              Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
              3 ~ 4015 ~ 110General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square2Cobalt HSSPlane / Side / Groove / Countersinking6 ~ 32Non-Coated
              Normál ár (ÁFA nélkül):
              13.32 €
              Normál feladási dátum:
              5 munkanapok
              Konfigurálás
            • High-Speed Steel Square End Mill, 4-Flute, Short / Non-Coated Model
              • Volume Discount
              • Non-Coated
              • 4 Flutes
              • S (Short)

              MISUMI

              High-Speed Steel Square End Mill, 4-Flute, Short / Non-Coated Model

              [Features] -Uncoated 4 flute short cutting edge-Effective for side milling with 40° helix angle stronger than standard helix angle-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
              További részletek
              Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
              3 ~ 408 ~ 65General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square4Cobalt HSSPlane / Side / Groove / Countersinking6 ~ 32Non-Coated
              Normál ár (ÁFA nélkül):
              12.05 €
              Normál feladási dátum:
              5 munkanapok
              Konfigurálás
            • High-Speed Steel Square End Mill, 4-Flute, Regular / Non-Coated Model
              • Volume Discount
              • Non-Coated
              • 4 Flutes
              • R (Regular)

              MISUMI

              High-Speed Steel Square End Mill, 4-Flute, Regular / Non-Coated Model

              [Features] -Uncoated 4-slot blade with normal length-Effective for side milling with 40° helix angle, which is stronger than the standard helix angle-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
              További részletek
              Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
              3 ~ 3012 ~ 68General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square4Cobalt HSSPlane / Side / Groove / Countersinking6 ~ 25Non-Coated
              Normál ár (ÁFA nélkül):
              14.55 €
              Normál feladási dátum:
              5 munkanapok
              Konfigurálás

            Legutóbb megtekintett termékek