2
Szűrési feltételek

Mindent töröl

  • Készlet
  • R Size(mm)
  • Type
  • work material
  • Blade length (ℓ)(mm)
  • Number of flutes(sheet)
  • Coating
  • Ball End Mills (Carbide) (Coating: TiAlN)

      • 2-Flute, Ball End, Miniature, FX-MG-EBD-3

          OSG

          2-Flute, Ball End, Miniature, FX-MG-EBD-3

          The use of FX coating and high strength carbide allows a wide range of machining.Coated for steelStandard/Alternation category: Manufacturer's standard productNumber of blades (pcs.) 2Shaft diameter (mm) 3, Total length (mm) 40, Spiral angle: standard spiral (30 to 44°)R Accuracy (µm) ±10.
          További részletek
          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
          0.2 ~ 1.5BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]0.8 ~ 82TiAlN403
          Normál ár (ÁFA nélkül):
          84.73 €
          Normál feladási dátum:
          6 munkanapok
          Konfigurálás
        • Spherical Ball End FXS-EQD
          • Volume Discount

          OSG

          Spherical Ball End FXS-EQD

          Spherical cutting edge prevent chattering in the machining of standing wall. Machining undercut enabled.
          További részletek
          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
          0.5 ~ 6Spherical BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○]0.7 ~ 8.12TiAlN60 ~ 1105 ~ 606 ~ 12
          Normál ár (ÁFA nélkül):
          121.20 €
          Normál feladási dátum:
          6 munkanapok
          Konfigurálás
        • MSB230G2 MUGEN-COATING High Precision Profit Ball End Mill
          • Volume Discount

          NS TOOL

          MSB230G2 MUGEN-COATING High Precision Profit Ball End Mill

          The tuned Infinity coating sustains high precision machining for a long time
          További részletek
          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
          0.05 ~ 3BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]0.1 ~ 102TiAlN50 ~ 804 ~ 6
          Normál ár (ÁFA nélkül):
          58.31 €
          Normál feladási dátum:
          6 munkanapok
          Konfigurálás
        • XAC series carbide ball end mill, 2-flute / short model
          • Volume Discount
          • TiAlN
          • General Steel
          • 2 Flutes
          • S (Short)

          MISUMI

          XAC series carbide ball end mill, 2-flute / short model

          [Features] All-purpose ball nose end mill with 2 cutting edges for a wide range of profiling-For rough machining of workpieces that are expected to have a good surface finish after machining-Can be reground. Please refer to the "Regrinding Service" page for information on application methods, range of services, prices, etc.
          További részletek
          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
          0.2 ~ 12.5BallGeneral Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.8 ~ 502TiAlN40 ~ 1803 ~ 25
          Normál ár (ÁFA nélkül):
          23.35 €
          Normál feladási dátum:
          5 munkanapok
          Konfigurálás
        • XAC series carbide ball end mill, 2-flute / short, long shank model
          • Volume Discount
          • TiAlN
          • General Steel
          • 2 Flutes

          MISUMI

          XAC series carbide ball end mill, 2-flute / short, long shank model

          [Features] -Ideal for high precision 3D machining of moulds due to high tool rigidity and excellent chip evacuation-For rough machining of the workpiece, a good surface finish can be expected after machining.-Long shank type, ideal for deep cavity milling-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
          További részletek
          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
          2 ~ 8BallGeneral Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]8 ~ 302TiAlN100 ~ 2504 ~ 16
          Normál ár (ÁFA nélkül):
          45.59 €
          Normál feladási dátum:
          5 munkanapok
          Konfigurálás
        • GS MILL Long Neck Hard Ball GSBNH2
          • Volume Discount

          NACHI(FUJIKOSHI)

          GS MILL Long Neck Hard Ball GSBNH2

          Suitable for microfabrication of mold. A variety of size alignment allows for multiple types of machining.
          További részletek
          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
          0.5BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]1.52TiAlN454
          Normál ár (ÁFA nélkül):
          58.45 €
          Normál feladási dátum:
          6 munkanapok
          Konfigurálás
        • Mold Meister Ball 2MMR
          • Volume Discount

          NACHI(FUJIKOSHI)

          Mold Meister Ball 2MMR

          Ideal for polishing of precision molds. R accuracy ± 3μm, R accuracy range 180 °
          További részletek
          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
          0.5 ~ 6BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]1.5 ~ 182TiAlN50 ~ 1204 ~ 12
          Normál ár (ÁFA nélkül):
          188.08 €
          Normál feladási dátum:
          6 munkanapok
          Konfigurálás
        • 2-Flute, Pencil Short Neck, Ball End (High Precision Type) FX-PCS-EBD-6

            OSG

            2-Flute, Pencil Short Neck, Ball End (High Precision Type) FX-PCS-EBD-6

            High pencil neck of stiffness and ultra-fine cemented carbide achieves high-speed, high-precision, ultra-life. Eliminate chatter problems in fine shape processing and dug processing.
            További részletek
            R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
            0.1 ~ 2BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[◎]0.16 ~ 3.22TiAlN50 ~ 1001 ~ 306
            Normál ár (ÁFA nélkül):
            83.69 €
            Normál feladási dátum:
            6 munkanapok
            Konfigurálás
          • 2-Flute, Ball End, FX-MG-EBD
            • Volume Discount

            OSG

            2-Flute, Ball End, FX-MG-EBD

            Can work with materials ranging from general materials to quenched steel. Can also be compatible with high speed model machining centers.
            További részletek
            R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
            0.5 ~ 15BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]2.5 ~ 552TiAlN50 ~ 1804 ~ 25
            Normál ár (ÁFA nélkül):
            91.40 €
            Normál feladási dátum:
            6 munkanapok
            Konfigurálás
          • 2-Flute, Ball End, WX-EBD

              OSG

              2-Flute, Ball End, WX-EBD

              General-purpose ball end mill for a wide range of workpieces and machining. High toughness carbide-based materials achieve a stable long-term continuous machining.
              További részletek
              R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
              0.6BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]32TiAlN504
              Normál ár (ÁFA nélkül):
              33.32 €
              Normál feladási dátum:
              6 munkanapok
              Konfigurálás
            • 2-Flute, Ball End (High Precision Type) FX-EBD-6

                OSG

                2-Flute, Ball End (High Precision Type) FX-EBD-6

                High precision ball end mill for high-speed machining that sufficiently exhibits performance of high-speed, high-precision machining center. Ultra-fine carbide based material achieves long tool life in hardened steel high-speed machining.
                További részletek
                R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                0.1 ~ 3BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]0.2 ~ 62TiAlN501.1 ~ 96
                Normál ár (ÁFA nélkül):
                89.48 €
                Normál feladási dátum:
                6 munkanapok
                Konfigurálás
              • 2-Flute, Long Shank, Ball End, FX-LS-MG-EBD
                • Volume Discount

                OSG

                2-Flute, Long Shank, Ball End, FX-LS-MG-EBD

                Depth of long shank can be processed
                További részletek
                R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                3BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]122TiAlN1406
                Normál ár (ÁFA nélkül):
                101.29 €
                Normál feladási dátum:
                6 munkanapok
                Konfigurálás
              • 2-Flute Heavy Duty for Heavy Duty Cutting Ball End (HSK Compatible) FX-HS-EBDS
                • Volume Discount

                OSG

                2-Flute Heavy Duty for Heavy Duty Cutting Ball End (HSK Compatible) FX-HS-EBDS

                Ball end mill for heavy cutting that allows high-speed, high-efficiency (large depth of the cut) machining. Shrink-HSK Just Fit short overall length types.
                További részletek
                R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                0.5 ~ 6BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]1 ~ 122TiAlN50 ~ 802.5 ~ 306 ~ 12
                Normál ár (ÁFA nélkül):
                87.89 €
                Normál feladási dátum:
                6 munkanapok
                Konfigurálás
              • 2-Flute, Ultra-High Precision Ball End (Heavy-Duty Type) WXE-HS-EBD

                  OSG

                  2-Flute, Ultra-High Precision Ball End (Heavy-Duty Type) WXE-HS-EBD

                  Ultra-high accuracy precision grade of ball end mill series for carpentes. Short overall length of shrink-fit holder. HP3 spec comes with a product precision guarantee.
                  További részletek
                  R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                  4BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / High Hardness Steel: to HRC65[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]82TiAlN60168
                  Normál ár (ÁFA nélkül):
                  86.67 €
                  Normál feladási dátum:
                  6 munkanapok
                  Konfigurálás
                • 2-Flute, Ball End with Lubricant Hole FX-HO-MG-EBD

                    OSG

                    2-Flute, Ball End with Lubricant Hole FX-HO-MG-EBD

                    Oil hole is quite useful in the machining of deep parts with chip emission problem.
                    További részletek
                    R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                    3 ~ 10BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]12 ~ 382TiAlN90 ~ 1606 ~ 20
                    Normál ár (ÁFA nélkül):
                    91.40 €
                    Normál feladási dátum:
                    6 munkanapok
                    Konfigurálás
                  • 2-Flute, Ball End with Lubricant Hole (High-Rigidity) FXS-HO-EBDS
                    • Volume Discount

                    OSG

                    2-Flute, Ball End with Lubricant Hole (High-Rigidity) FXS-HO-EBDS

                    Extremely increased rigidity ball end mill with oil hole for high hardness steel.
                    További részletek
                    R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                    3 ~ 10BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○]6 ~ 202TiAlN90 ~ 1606 ~ 20
                    Normál ár (ÁFA nélkül):
                    95.68 €
                    Normál feladási dátum:
                    6 munkanapok
                    Konfigurálás
                  • 2-Flute Pencil Neck, Ball End FX-PC-MG-EBD

                      OSG

                      2-Flute Pencil Neck, Ball End FX-PC-MG-EBD

                      Quality cutting is provided even in large protruding length, due to high rigidity pencil neck.
                      További részletek
                      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                      0.3 ~ 6BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]0.6 ~ 222TiAlN60 ~ 16010 ~ 806 ~ 16
                      Normál ár (ÁFA nélkül):
                      84.69 €
                      Normál feladási dátum:
                      6 munkanapok
                      Konfigurálás
                    • 2-Flute Pencil Long Neck, Ball End FX-PCL-EBD

                        OSG

                        2-Flute Pencil Long Neck, Ball End FX-PCL-EBD

                        Ball end mill for deep engraving work that ordinary end mills can't reach.
                        További részletek
                        R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                        2 ~ 6BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]8 ~ 222TiAlN200 ~ 250100 ~ 14010 ~ 16
                        Normál ár (ÁFA nélkül):
                        239.02 €
                        Normál feladási dátum:
                        6 munkanapok
                        Konfigurálás
                      • 3-Flute Ball End, High-Cut High-Feed Type PHX-DBT

                          OSG

                          3-Flute Ball End, High-Cut High-Feed Type PHX-DBT

                          New concept ball end mill with a low-resistance blade tool shape for a large amount of cutting per blade. Can perform high-feed machining like never before.
                          További részletek
                          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                          0.5 ~ 10BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[○] / Cast Iron[○]1.5 ~ 303TiAlN60 ~ 2006 ~ 20
                          Normál ár (ÁFA nélkül):
                          84.50 €
                          Normál feladási dátum:
                          6 munkanapok
                          Konfigurálás
                        • For Finishing 2 Flute Ball End (HSK Compatible) FX-H-EBD
                          • Volume Discount

                          OSG

                          For Finishing 2 Flute Ball End (HSK Compatible) FX-H-EBD

                          Achieves stable cutting with not only HSK holders but also with L / D large shrink long arbors.
                          További részletek
                          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                          0.5 ~ 6BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]1 ~ 122TiAlN50 ~ 802.5 ~ 306 ~ 12
                          Normál ár (ÁFA nélkül):
                          83.15 €
                          Normál feladási dátum:
                          6 munkanapok
                          Konfigurálás
                        • MSB345 3-Flute Ball-End Mill
                          • Volume Discount

                          NS TOOL

                          MSB345 3-Flute Ball-End Mill

                          Enables efficient machining with little chatter through the adoption of a unique three-flute blade shape and variable distribution
                          További részletek
                          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                          0.5 ~ 6BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]1.5 ~ 203TiAlN60 ~ 1206 ~ 12
                          Normál ár (ÁFA nélkül):
                          71.66 €
                          Normál feladási dátum:
                          6 munkanapok
                          Konfigurálás
                        • MACH225SF Short Shank, for High-Speed and High-Hardness Processing, Ball End Mill (for Thermal Insert)
                          • Volume Discount

                          NS TOOL

                          MACH225SF Short Shank, for High-Speed and High-Hardness Processing, Ball End Mill (for Thermal Insert)

                          Short shank type (supports shrink fit). Ball end mill designed for high-speed and high-hardness machining
                          További részletek
                          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                          0.1 ~ 3BallGeneral Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Titanium[○]0.2 ~ 62TiAlN35 ~ 450.5 ~ 154 ~ 6
                          Normál ár (ÁFA nélkül):
                          45.91 €
                          Normál feladási dátum:
                          6 munkanapok
                          Konfigurálás
                        • MSB230 MUGEN-COATING 2-Flute Ball End Mill
                          • AKCIÓ eddig: 23.03.2025
                          • Volume Discount

                          NS TOOL

                          MSB230 MUGEN-COATING 2-Flute Ball End Mill

                          Supports three-dimensional precision machining from low to high speeds
                          További részletek
                          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                          0.05 ~ 6BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]0.1 ~ 202TiAlN50 ~ 1104 ~ 12
                          Normál ár (ÁFA nélkül):
                          28.74 €
                          Normál ár (ÁFA nélkül):
                          Speciális ár
                          Normál feladási dátum:
                          Raktári cikk - 1 munkanap
                          Egyes tételeket még aznap fel lehet adni
                          Konfigurálás
                        • MSB230SF MUGEN-COATING Ball End Mill with Short Shank (for Shrink Fitting)
                          • Volume Discount

                          NS TOOL

                          MSB230SF MUGEN-COATING Ball End Mill with Short Shank (for Shrink Fitting)

                          Long Neck Ball End Mill for Short Shank Type (supports shrink fit)
                          További részletek
                          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                          0.1 ~ 6BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]0.2 ~ 122TiAlN35 ~ 604 ~ 12
                          Normál ár (ÁFA nélkül):
                          37.33 €
                          Normál feladási dátum:
                          6 munkanapok
                          Konfigurálás
                        • MSB230S MUGEN-COATING Short Ball End Mill
                          • AKCIÓ eddig: 23.03.2025
                          • Volume Discount

                          NS TOOL

                          MSB230S MUGEN-COATING Short Ball End Mill

                          The high-rigidity design enables high speed machining without chattering
                          További részletek
                          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                          0.1 ~ 6BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]0.2 ~ 122TiAlN50 ~ 1104 ~ 12
                          Normál ár (ÁFA nélkül):
                          43.04 €
                          Normál ár (ÁFA nélkül):
                          Speciális ár
                          Normál feladási dátum:
                          Raktári cikk - 1 munkanap
                          Egyes tételeket még aznap fel lehet adni
                          Konfigurálás
                        • MSBL230 MUGEN-COATING Long Ball End Mill
                          • Volume Discount

                          NS TOOL

                          MSBL230 MUGEN-COATING Long Ball End Mill

                          Machining utilizing the benefits of a long shank is possible
                          További részletek
                          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                          0.1 ~ 5BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]0.5 ~ 252TiAlN70 ~ 2003 ~ 10
                          Normál ár (ÁFA nélkül):
                          110.77 €
                          Normál feladási dátum:
                          6 munkanapok
                          Konfigurálás
                        • MACH225 MUGEN-COATING High Speed Ball End Mill for Hardened Steels
                          • Volume Discount

                          NS TOOL

                          MACH225 MUGEN-COATING High Speed Ball End Mill for Hardened Steels

                          Large cutting depth can be set, with effective high-speed feed
                          További részletek
                          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                          0.1 ~ 3BallGeneral Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Titanium[○]0.2 ~ 62TiAlN50 ~ 600.5 ~ 154 ~ 6
                          Normál ár (ÁFA nélkül):
                          52.58 €
                          Normál feladási dátum:
                          6 munkanapok
                          Konfigurálás
                        • MUGEN-COATING Extra Long Shank Ball End Mill MSBXL230
                          • Volume Discount

                          NS TOOL

                          MUGEN-COATING Extra Long Shank Ball End Mill MSBXL230

                          Infinity coating has been adopted for the extra long ball end mill. Machining utilizing the benefits of a long shank is possible
                          További részletek
                          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                          0.5 ~ 5BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]2.5 ~ 252TiAlN100 ~ 2503 ~ 10
                          Normál ár (ÁFA nélkül):
                          128.70 €
                          Normál feladási dátum:
                          6 munkanapok
                          Konfigurálás
                        • SBD2LA Long Ball End Mill, 2-Flute, OK Coated
                          • Volume Discount

                          OKAZAKI SEIKO

                          SBD2LA Long Ball End Mill, 2-Flute, OK Coated

                          [Features] A carbide long ball end mill with 2 cutting edges.The deep rib shape prevents tool interference when deep cutting.The long shank allows milling in a wide range.[Features] Suitable for milling curved surfaces, engraving and R-slot milling.
                          További részletek
                          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                          1 ~ 12.5BallGeneral Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○]2 ~ 602TiAlN80 ~ 23014 ~ 216 ~ 25
                          Normál ár (ÁFA nélkül):
                          101.35 €
                          Normál feladási dátum:
                          8 munkanapok
                          Konfigurálás
                        • SPSBD2A SP Series Ball End Mill 2 Flutes / OK Coated
                          • Volume Discount

                          OKAZAKI SEIKO

                          SPSBD2A SP Series Ball End Mill 2 Flutes / OK Coated

                          Ball end mill with standard radius accuracy of ±10 μm supporting a wide range of materials machining.
                          További részletek
                          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                          0.5 ~ 12.5BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○]2 ~ 552TiAlN60 ~ 1804 ~ 25
                          Normál ár (ÁFA nélkül):
                          23.34 €
                          Normál feladási dátum:
                          6 munkanapok
                          Konfigurálás
                        • One Cut Ball (Slim Shank) DZ-OCUB

                            DIJET

                            One Cut Ball (Slim Shank) DZ-OCUB

                            Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
                            További részletek
                            R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                            3BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]92TiAlN1205
                            Normál ár (ÁFA nélkül):
                            93.50 €
                            Normál feladási dátum:
                            6 munkanapok
                            Konfigurálás
                          • One Cut Ball 03 DZ03-OCSB

                              DIJET

                              One Cut Ball 03 DZ03-OCSB

                              Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
                              További részletek
                              R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                              5BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]152TiAlN10010
                              Normál ár (ÁFA nélkül):
                              117.74 €
                              Normál feladási dátum:
                              6 munkanapok
                              Konfigurálás
                            • One Cut Hard End Mill DV-OCSB

                                DIJET

                                One Cut Hard End Mill DV-OCSB

                                Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
                                További részletek
                                R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                                3 ~ 5BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] / Graphite[○]9 ~ 152TiAlN90 ~ 1006 ~ 10
                                Normál ár (ÁFA nélkül):
                                75.15 €
                                Normál feladási dátum:
                                6 munkanapok
                                Konfigurálás
                              • 2-Blade Sander Ball
                                • Volume Discount

                                WIDIN

                                2-Blade Sander Ball

                                [Features]· Compatible with soft materials and aluminum alloys with a blade shape that emphasizes sharpness.
                                További részletek
                                R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                                R0.75 ~ R10BallGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎]4 ~ 382TiAlN50 ~ 1603 ~ 20
                                Normál ár (ÁFA nélkül):
                                34.19 €
                                Normál feladási dátum:
                                8 munkanapok
                                Konfigurálás
                              • FX-Coated 2-Flute, Type DL FX-EBD-DL-6

                                  OSG

                                  FX-Coated 2-Flute, Type DL FX-EBD-DL-6

                                  [Features]· Ball end mill with FX coating for excellent heat resistance.
                                  További részletek
                                  R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                                  1BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]62TiAlN506
                                  Normál ár (ÁFA nélkül):
                                  97.67 €
                                  Normál feladási dátum:
                                  6 munkanapok
                                  Konfigurálás
                                • Coated (TiAIN) Solid Carbide End Mills (2 Flutes) IC2MBV

                                    THE CUT

                                    Coated (TiAIN) Solid Carbide End Mills (2 Flutes) IC2MBV

                                    [Features]· Outstanding cost performance.· Capable of machining a wide range of workpieces from raw materials up to alloy steel.· TiAlN coated for a longer tool life.
                                    További részletek
                                    R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                                    2 ~ 6BallGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○]8 ~ 222TiAlN70 ~ 1106 ~ 12
                                    Normál ár (ÁFA nélkül):
                                    31.79 €
                                    Normál feladási dátum:
                                    6 munkanapok
                                    Konfigurálás

                                  Legutóbb megtekintett termékek