High Helical End Mills (Carbide)（work material：Quenched and tempered steel）

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 2 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 24 Days or Less

?* Information on days to ship and prices

XAC series carbide high-helical end mill for high-hardness steel machining, multi-blade, 45° torsion / long model

MISUMI

The expensive long flute type for high hardness is offered at an affordable price

Volume Discount

TiAlN
High-Hardness Steel
Multi-Flutes （5 ~）

Select to compare

Configure now
Starting from^∗ ：	45.94 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TSC series carbide high-helical end mill, multi-flute, 53° spiral / regular model

MISUMI

[Features]
-When machining raw material, heat-treated steel, aluminium, etc., when finishing standing walls of the mould bottom (main mould), etc., they show their strength thanks to the positive rake angle, the sharp corners of the bottom edge and the strong bevel angle of 53°
-High tool rigidity minimises tool tilt during side milling.

Volume Discount

TS
General Steel
Multi-Flutes （5 ~）
R (Regular)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

SPEED / T 4 Flute Anti-Vibration High Border

SPEED TIGER

[Features]
· High helical type focusing on finishing with high speed processing and vibration prevention effects due to core thickness change.
· P type T coat has a high thermal oxidation temperature and surface hardness, and provides a long life.
· Can be used with a wide range of applicable cutting materials.
· Focuses on usability with a long blade length of 30 mm and a blade diameter of ø10.

Select to compare

Configure now
Starting from^∗ ：	39.70 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

TSC series carbide high-helical end mill (for shrink fit holder / cutting edge deflection accuracy of 5μm or Less). Multi-flute, 53° spiral / stub model

MISUMI

The high precision high helical end mill for shrink fit holder is ideal for side finishing

Volume Discount

TS
General Steel
Multi-Flutes （5 ~）
B (Stub)

Select to compare

Configure now
Starting from^∗ ：	98.32 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TSC series carbide high-helical end mill (cutting edge deflection accuracy of 5 μm or less)

MISUMI

[Features]
-Cutting edge runout accuracy within 5µm (compared to manufacturer's measurements), back taper within 5µm and shank diameter tolerance h5 standards are used, making it ideal for lateral surface machining that requires high precision using high quality tools with low quality variation
-Designed with a blade shape that emphasises sharpness with positive blade and cutting edge sharpness corner, suitable for machining raw material such as carbon steel.

Volume Discount

TS
General Steel
Multi-Flutes （5 ~）
R (Regular)

Select to compare

Configure now
Starting from^∗ ：	94.04 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TSC series carbide high-helical end mill, multi-flute, 53° spiral / short model

MISUMI

[Features]
When machining raw material, heat-treated steel, aluminium, etc., finishing standing walls for mould bottom (main mould), etc., they show their strength thanks to the positive rake angle, sharp corners of the bottom edge and strong bevel angle of 53°
-High tool rigidity minimises tool tilt during side milling.

Volume Discount

TS
General Steel
Multi-Flutes （5 ~）
S (Short)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

XAC series carbide high-helical end mill, for high-hardness steel machining, multi-blade, 45° torsion / regular model

MISUMI

[Features]
-Designed with a tool shape that increases rigidity for machining high hardness steels
-Since it is designed with a large rake angle, it can also be used on machines where the cutting speed is not increased
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

Volume Discount

TiAlN
High-Hardness Steel
Multi-Flutes （5 ~）

Select to compare

Configure now
Starting from^∗ ：	40.63 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

SHE Regular Shank Hard Square End Mill, 6-Flute, OK Hard Coated

OKAZAKI SEIKO

Unique blade type and OK hard coating enable high speed machining of high hardness materials up to 65 HRC.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	90.77 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

SHE6LH Long Shank Hard Square End Mill, 6-Flute, OK Hard Coated

OKAZAKI SEIKO

Long shank type that allows machining in deep sections. Achieves machining of hardened steel up to 65 HRC due to the OK hard coating.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	112.92 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

One Cut 70 DV-SEH

DIJET

Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

Select to compare

Configure now
Starting from^∗ ：	116.71 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

One Cut 70 (with Fine Corner R) DV-SEHH-R02

DIJET

Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

Select to compare

Configure now
Starting from^∗ ：	83.01 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

For Hard Materials, Multi-Flute / Negative Rake Angle / Hard Material Finishing, End Mill (Short)

KYOCERA

End mill for high hardness materials, which has achieved long tool life and stable machining.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	82.94 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Promotional pricing ends 30/11/2024

For Hard Materials, Multi-Flute / Negative Rake Angle / Hard Material Finishing, End Mill (Medium)

KYOCERA

End mill for high hardness materials with long tool life and stable machining.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	84.64 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

SPEED / T 3 Flute Anti-Vibration

SPEED TIGER

[Features]
· High helical type with 3-flute blade ideal for grooving.
· Supports high speed processing and large cutting depth with vibration prevention effects due to core thickness change.
· P type T coat has a high thermal oxidation temperature and surface hardness, provides a long life, and has a wide range of compatible work materials.

Select to compare

Configure now
Starting from^∗ ：	17.18 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide 4-Flute High-Hardness End Mill 55° E168TX

7 LEADERS

[Features]
· High performance 4-flute 55° high torsion end mill for machining high hardness materials with UMG carbide substrate.
· Enables high-efficiency machining in side cutting of high-hardness materials (up to HRC 70).
· Nanoparticle multilayer coating.
· Suitable for machining high-hardness materials from HRC 45 to 70 due to high sheath harness and high initial oxidation temperature.
· Suitable for a wide range of work materials from general steel to high hardness steel.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	55.21 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

GSX MILL VL Slot 2.5D GSXVLSLT3-2.5D

NACHI(FUJIKOSHI)

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	83.10 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

GSX MILL VL Hard 2.5D GSXVLH6-2.5D

NACHI(FUJIKOSHI)

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	115.79 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Solid Carbide High Helix (45°) End Mill For High Hardnesses (4 Flutes), IC4HST

THE CUT

[Features]
· Demonstrates excellent wear and heat resistance thanks to its special coating geared towards high hardness materials.
· Capable of machining a wide range of workpieces from alloy steel to high hardness steel (HRC55 or lower.)
· The 4 flutes and 45° torsion angle help reduce cutting resistance and provide a quality finished surface.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	37.04 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Solid Carbide High Helix End Mill (6 Flutes) IC6HXE

THE CUT

[Features]
· Outstanding cost performance.
· The special coating improves wear resistance.
· Also good for machining high hardness steel.
· All sizes features 6 flutes.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	61.97 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days
Specifications
Blade diameter (D)(φ)
work material
Blade length (ℓ)(mm)
Number of flutes(sheet)
Type
Coating
Shank diameter (d)(mm)
Overall Length (L)(mm)
Underneck length (ℓ1)(mm)
Machining Application
Blade tip shape
Torsion Angle (θ)

	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing ends 30/11/2024	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	MISUMI	MISUMI	SPEED TIGER	MISUMI	MISUMI	MISUMI	MISUMI	OKAZAKI SEIKO	OKAZAKI SEIKO	DIJET	DIJET	KYOCERA	KYOCERA	SPEED TIGER	7 LEADERS	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	THE CUT	THE CUT
Product Series	XAC series carbide high-helical end mill for high-hardness steel machining, multi-blade, 45° torsion / long model	TSC series carbide high-helical end mill, multi-flute, 53° spiral / regular model	SPEED / T 4 Flute Anti-Vibration High Border	TSC series carbide high-helical end mill (for shrink fit holder / cutting edge deflection accuracy of 5μm or Less). Multi-flute, 53° spiral / stub model	TSC series carbide high-helical end mill (cutting edge deflection accuracy of 5 μm or less)	TSC series carbide high-helical end mill, multi-flute, 53° spiral / short model	XAC series carbide high-helical end mill, for high-hardness steel machining, multi-blade, 45° torsion / regular model	SHE Regular Shank Hard Square End Mill, 6-Flute, OK Hard Coated	SHE6LH Long Shank Hard Square End Mill, 6-Flute, OK Hard Coated	One Cut 70 DV-SEH	One Cut 70 (with Fine Corner R) DV-SEHH-R02	For Hard Materials, Multi-Flute / Negative Rake Angle / Hard Material Finishing, End Mill (Short)	For Hard Materials, Multi-Flute / Negative Rake Angle / Hard Material Finishing, End Mill (Medium)	SPEED / T 3 Flute Anti-Vibration	Carbide 4-Flute High-Hardness End Mill 55° E168TX	GSX MILL VL Slot 2.5D GSXVLSLT3-2.5D	GSX MILL VL Hard 2.5D GSXVLH6-2.5D	Solid Carbide High Helix (45°) End Mill For High Hardnesses (4 Flutes), IC4HST	Solid Carbide High Helix End Mill (6 Flutes) IC6HXE
Starting from^∗	45.94 € *Unit price with basic configuration Volume Discount	- Volume Discount	39.70 € *Unit price with basic configuration	98.32 € *Unit price with basic configuration Volume Discount	94.04 € *Unit price with basic configuration Volume Discount	- Volume Discount	40.63 € *Unit price with basic configuration Volume Discount	90.77 € *Unit price with basic configuration Volume Discount	112.92 € *Unit price with basic configuration Volume Discount	116.71 € *Unit price with basic configuration	83.01 € *Unit price with basic configuration	82.94 € *Unit price with basic configuration Volume Discount	84.64 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 Volume Discount	17.18 € *Unit price with basic configuration	55.21 € *Unit price with basic configuration Volume Discount	83.10 € *Unit price with basic configuration Volume Discount	115.79 € *Unit price with basic configuration Volume Discount	37.04 € *Unit price with basic configuration Volume Discount	61.97 € *Unit price with basic configuration Volume Discount
Min. Shipping Days	5 Days	5 Days	7 Days	5 Days	5 Days	5 Days	5 Days	10 Days	10 Days	6 Days	6 Days	8 Days	Same day	5 Days	8 Days	6 Days	6 Days	6 Days	6 Days
Specifications	TiAlN High-Hardness Steel Multi-Flutes （5 ~）	TS General Steel Multi-Flutes （5 ~） R (Regular)		TS General Steel Multi-Flutes （5 ~） B (Stub)	TS General Steel Multi-Flutes （5 ~） R (Regular)	TS General Steel Multi-Flutes （5 ~） S (Short)	TiAlN High-Hardness Steel Multi-Flutes （5 ~）
Blade diameter (D)(φ)	6 ～ 20	1 ～ 20	8 ～ 16	3 ～ 12	3 ～ 12	1 ～ 12	6 ～ 25	6 ～ 20	6 ～ 20	8	4	1 ～ 12	1 ～ 25	3	3 ～ 20	3 ～ 16	6 ～ 20	3 ～ 20	6 ～ 12
work material	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[○]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]
Blade length (ℓ)(mm)	26 ～ 76	2.5 ～ 45	20 ～ 40	4.5 ～ 18	10 ～ 30	2 ～ 24	13 ～ 44	15 ～ 45	15 ～ 45	20	12	4 ～ 26	5 ～ 53	8	8 ～ 38	7.5 ～ 40	15 ～ 50	8 ～ 45	15 ～ 30
Number of flutes(sheet)	6 ～ 8	4 ～ 6	4	4 ～ 6	4 ～ 6	4 ～ 6	6 ～ 8	6	6	6	4	4 ～ 7	4 ～ 8	3	4	3	6	4	6
Type	High Helical	High Helical	High Helical	High Helical	High Helical	High Helical	High Helical	Square	Square	High Helical	High Helical	High Helical	High Helical	High Helical	High Helical	High Helical	High Helical	High Helical	High Helical
Coating	TiAlN	For High Hardness (Silicon Group)	-	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	TiAlN	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	-	-	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	-	-	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	TiAlN	-
Shank diameter (d)(mm)	6 ～ 20	6 ～ 20	8 ～ 16	6 ～ 12	6 ～ 12	6 ～ 12	6 ～ 25	6 ～ 20	6 ～ 20	8	6	6 ～ 12	6 ～ 25	4	6 ～ 20	6 ～ 16	6 ～ 20	4 ～ 20	6 ～ 12
Overall Length (L)(mm)	70 ～ 140	60 ～ 130	60 ～ 100	50 ～ 75	60 ～ 100	60 ～ 100	57 ～ 104	50 ～ 105	80 ～ 150	75	60	60 ～ 90	60 ～ 125	50	50 ～ 100	45 ～ 90	50 ～ 100	50 ～ 100	60 ～ 100
Underneck length (ℓ1)(mm)	-	20 ～ 92	-	-	-	17 ～ 70	-	-	-	-	-	-	-	-	-	-	-	-	-
Machining Application	Plane / Side	Plane / Side / Inclined Cuts	Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Side	Side	Plane / Side	Plane / Side / Groove	Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Countersinking	Groove	Side	Side / Groove	Side
Blade tip shape	With Lead	Sharp Edge	-	Sharp Edge	Sharp Edge	Sharp Edge	With Lead	Sharp Edge	Sharp Edge	Sharp Edge	Micro R	With Lead	With Lead	-	With Lead	Sharp Edge	Sharp Edge	-	-
Torsion Angle (θ)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	Variable lead	Variable lead	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)

Filter by:

Stock

- Show only stock items
Clear

Blade diameter (D)(φ)
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10～10.9
  - 10
  - 10.1
  - 10.2
  - 10.3
  - 10.4
  - 10.6
  - 10.7
  - 10.8
  - 10.9
- 11～11.9
  - 11
  - 11.1
  - 11.2
  - 11.3
  - 11.4
  - 11.6
  - 11.7
  - 11.8
  - 11.9
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 20
- 25
- 30
Drawing

Clear

work material
- General Steel
- Quenched and tempered steel
- High Hardness Steel: to HRC55
- High Hardness Steel: to HRC60
- High Hardness Steel: to HRC65
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Resin
Details

Clear

Blade length (ℓ)(mm)
- 2～2.5
  - 2
  - 2.5
- 4～4.5
  - 4
  - 4.5
- 5
- 6
- 7.5
- 8
- 9
- 10～10.5
  - 10
  - 10.5
- 11
- 12～12.5
  - 12
  - 12.5
- 13～13.5
  - 13
  - 13.5
- 14
- 15
- 16～16.5
  - 16
  - 16.5
- 17～17.5
  - 17
  - 17.5
- 18
- 19～19.5
  - 19
  - 19.5
- 20
- 22～22.5
  - 22
  - 22.5
- 23
- 24
- 25～25.5
  - 25
  - 25.5
- 26
- 28
- 30
- 32
- 33
- 36
- 37
- 38
- 40
- 42
- 44
- 45
- 46
- 48
- 50
- 53
- 56
- 66
- 70
- 76
- 100
- 110
[5-45/1mm Unit(s)]

Drawing

Clear

Number of flutes(sheet)
2

3

4

5

6

7

8

10
Clear

Type
- Square
- High Helical
Clear

Coating
- For High Hardness (Silicon Group)
- TiAlN
- For General Steels (AlCrN, etc.)
- Dia Coat
Details

Clear

Shank diameter (d)(mm)
4

6

8

10

12

14

16

18

20

25

32
Drawing

Clear

Overall Length (L)(mm)
45

50

57

60

63

65

70

72

75

80

83

90

92

100

104

105

110

120

121

125

130

140

150

160

180

200
Drawing

Clear

Underneck length (ℓ1)(mm)
- 15
- 20
- 21
- 25
- 27
- 30
- 32
- 38
- 40
- 44
- 50
- 54
- 60
- 65
- 80
- 100
[17-92/1mm Unit(s)]

Drawing

Clear

Machining Application
- Plane
- Side
- Groove
- Plunging (Z feed)
- Inclined Cuts
- Countersinking
Images

Clear

Blade tip shape
- Sharp Edge
- With Lead
- Micro R
Images

Clear

Torsion Angle (θ)
- High Helix (45˚ to 60˚)
- Variable lead
Drawing

Clear

Brand

- MISUMI (6)
- Cost Efficient Products ()
- DIJET (2)
- KYOCERA (2)
- NACHI(FUJIKOSHI) (2)
- OKAZAKI SEIKO (2)
- SPEED TIGER (2)
- THE CUT (2)
- 7 LEADERS (1)
- OSG (0)
- GUHRING (0)
Clear

CAD data type

- 2D
- 3D
Clear

High Helical End Mills (Carbide)（work material：Quenched and tempered steel）

XAC series carbide high-helical end mill for high-hardness steel machining, multi-blade, 45° torsion / long model

TSC series carbide high-helical end mill, multi-flute, 53° spiral / regular model

SPEED / T 4 Flute Anti-Vibration High Border

TSC series carbide high-helical end mill (for shrink fit holder / cutting edge deflection accuracy of 5μm or Less). Multi-flute, 53° spiral / stub model

TSC series carbide high-helical end mill (cutting edge deflection accuracy of 5 μm or less)

TSC series carbide high-helical end mill, multi-flute, 53° spiral / short model

XAC series carbide high-helical end mill, for high-hardness steel machining, multi-blade, 45° torsion / regular model

SHE Regular Shank Hard Square End Mill, 6-Flute, OK Hard Coated

SHE6LH Long Shank Hard Square End Mill, 6-Flute, OK Hard Coated

One Cut 70 DV-SEH

One Cut 70 (with Fine Corner R) DV-SEHH-R02

For Hard Materials, Multi-Flute / Negative Rake Angle / Hard Material Finishing, End Mill (Short)

For Hard Materials, Multi-Flute / Negative Rake Angle / Hard Material Finishing, End Mill (Medium)

SPEED / T 3 Flute Anti-Vibration

Carbide 4-Flute High-Hardness End Mill 55° E168TX

GSX MILL VL Slot 2.5D GSXVLSLT3-2.5D

GSX MILL VL Hard 2.5D GSXVLH6-2.5D

Solid Carbide High Helix (45°) End Mill For High Hardnesses (4 Flutes), IC4HST

Solid Carbide High Helix End Mill (6 Flutes) IC6HXE

Categories related to High Helical End Mills (Carbide)

Fizetési mód

Igény szerinti gyártás

Nézetváltás

Tanúsítványok

Globális MISUMI

Közösségi média

Jogi nyilatkozat