Square End Mills (Carbide) (Torsion Angle (θ): High Helix (45˚ to 60˚) 2 oldal)

• 

  • Volume Discount

  NS TOOL

  NEA-2 Aluminum (Non-Ferrous) End Mill

  Machines using a wide chip pocket and sharp cutting quality.

  További részletek

  Blade diameter (D)(φ)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Coating	Shank diameter (d)(mm)	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)
  3 ～ 6	Aluminum[◎] / Copper[◎]	10 ～ 30	2	Square	Non-Coated	6	50 ～ 70	–

  Normál ár (ÁFA nélkül):

  73.58 €～

  Normál feladási dátum:

  6 munkanapok

  Konfigurálás
• 

  • Volume Discount

  NS TOOL

  AL-3LS Long Shank End Mill for Aluminum (Under-Shank)

  A slim type with a narrower shank than the blade diameter, supporting vertical wall processing

  További részletek

  Blade diameter (D)(φ)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Coating	Shank diameter (d)(mm)	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)
  5 ～ 12	Aluminum[◎]	7.5 ～ 18	3	Square	Non-Coated	4 ～ 10	80 ～ 150	–

  Normál ár (ÁFA nélkül):

  93.85 €～

  Normál feladási dátum:

  6 munkanapok

  Konfigurálás
• 

  • Volume Discount

  NS TOOL

  ALZ345 High-Efficiency Heavy Cutting End Mill for Aluminum

  Capable of stable high efficiency machining under all conditions. High-efficiency heavy cutting type with enhanced chip discharge performance

  További részletek

  Blade diameter (D)(φ)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Coating	Shank diameter (d)(mm)	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)
  1 ～ 12	Aluminum[◎]	1.5 ～ 18	3	Square	Non-Coated	4 ～ 12	45 ～ 80	3 ～ 36

  Normál ár (ÁFA nélkül):

  48.77 €～

  Normál feladási dátum:

  6 munkanapok

  Konfigurálás
• 

  • Volume Discount

  NS TOOL

  NX-45 Lead 45 End Mill

  The blade length is 5x the blade diameter and the torsion angle is 45°. Features excellent sharpness enabling deep side cutting

  További részletek

  Blade diameter (D)(φ)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Coating	Shank diameter (d)(mm)	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)
  0.5 ～ 11.9	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]	2.5 ～ 59.5	2	Square	Non-Coated	4 ～ 12	40 ～ 110	–

  Normál ár (ÁFA nélkül):

  95.50 €～

  Normál feladási dátum:

  6 munkanapok

  Konfigurálás
• 

  • Volume Discount

  NS TOOL

  MHDH445 4-Flute Square-End Mill for High-Hardness

  Achieves stable long life in extended periods of machining in high-hardness range (48-65 HRC). Focusing on blade shape to improve deflection amount and processing accuracy

  További részletek

  Blade diameter (D)(φ)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Coating	Shank diameter (d)(mm)	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)
  1 ～ 4	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]	2 ～ 8	4	Square	For High Hardness (Silicon Group)	6	60	–

  Normál ár (ÁFA nélkül):

  65.94 €～

  Normál feladási dátum:

  6 munkanapok

  Konfigurálás
• 

  • Volume Discount

  NS TOOL

  MHDH645 6-Flute Square-End Mill for High-Hardness

  Achieves stable long life in extended periods of machining in high-hardness range (48-65 HRC). Focusing on blade shape to improve deflection amount and processing accuracy

  További részletek

  Blade diameter (D)(φ)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Coating	Shank diameter (d)(mm)	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)
  5 ～ 12	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]	10 ～ 36	6	Square	For High Hardness (Silicon Group)	6 ～ 12	60 ～ 90	–

  Normál ár (ÁFA nélkül):

  87.88 €～

  Normál feladási dátum:

  6 munkanapok

  Konfigurálás
• 

  • Volume Discount

  NS TOOL

  MSE345 MUGEN-COATING 3-Flute End Mill

  Adopts a unique Infinity coating for 3-flute end mill. Cutting Resistance Reduced Compared to 30° Torsion

  További részletek

  Blade diameter (D)(φ)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Coating	Shank diameter (d)(mm)	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)
  3 ～ 12	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	8 ～ 30	3	Square	TiAlN	6 ～ 12	50 ～ 80	–

  Normál ár (ÁFA nélkül):

  64.99 €～

  Normál feladási dátum:

  6 munkanapok

  Konfigurálás
• 

  • Volume Discount

  NS TOOL

  MSZ345 MUGEN-COATING POWER "Z" End Mill

  With the newly developed special blade shape, machining capacity is greatly improved. Achieves unprecedented high performance machining from plunging to grooving

  További részletek

  Blade diameter (D)(φ)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Coating	Shank diameter (d)(mm)	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)
  1 ～ 12	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	1.5 ～ 26	3	Square	TiAlN	4 ～ 12	45 ～ 80	–

  Normál ár (ÁFA nélkül):

  58.31 €～

  Normál feladási dátum:

  6 munkanapok

  Konfigurálás
• 

  • Volume Discount

  NS TOOL

  MHD445 MUGEN-COATING 4-Flute End Mill for Hardened Steel

  Ideal for finishing in high-hardness regions (48-65 HRC). Achieves precision finishing with little deflection

  További részletek

  Blade diameter (D)(φ)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Coating	Shank diameter (d)(mm)	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)
  1 ～ 4	General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Titanium[○]	1.5 ～ 8	4	Square	For High Hardness (Silicon Group)	6	60	–

  Normál ár (ÁFA nélkül):

  65.94 €～

  Normál feladási dátum:

  6 munkanapok

  Konfigurálás
• 

  • Volume Discount

  NS TOOL

  MX245 MUGEN-COATING 2-Flute LEAD 45 End Mill

  Deflection of machining surfaces has been minimized while employing an extra-long blade

  További részletek

  Blade diameter (D)(φ)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Coating	Shank diameter (d)(mm)	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)
  0.3 ～ 12	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	1.5 ～ 60	2	Square	TiAlN	4 ～ 12	45 ～ 105	–

  Normál ár (ÁFA nélkül):

  42.09 €～

  Normál feladási dátum:

  6 munkanapok

  Konfigurálás
• 

  • Volume Discount

  NS TOOL

  MX445 MUGEN-COATING 4-Flute LEAD 45 End Mill

  Capable of high-precision and high-performance machining due to the unique, highly rigid design

  További részletek

  Blade diameter (D)(φ)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Coating	Shank diameter (d)(mm)	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)
  1 ～ 12	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	5 ～ 60	4	Square	TiAlN	4 ～ 12	45 ～ 105	–

  Normál ár (ÁFA nélkül):

  52.58 €～

  Normál feladási dátum:

  6 munkanapok

  Konfigurálás
• 

  • Volume Discount

  NS TOOL

  Power Solid End Mill NE-2

  2-flute blade with 45° high torsion

  További részletek

  Blade diameter (D)(φ)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Coating	Shank diameter (d)(mm)	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)
  1 ～ 12	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]	2.5 ～ 23	2	Square	Non-Coated	4 ～ 12	45 ～ 70	–

  Normál ár (ÁFA nélkül):

  64.04 €～

  Normál feladási dátum:

  6 munkanapok

  Konfigurálás
• 

  • Volume Discount

  NS TOOL

  Power Solid End Mill NE-3

  3-flute blade with 45° high torsion

  További részletek

  Blade diameter (D)(φ)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Coating	Shank diameter (d)(mm)	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)
  3 ～ 12	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]	8 ～ 23	3	Square	Non-Coated	6 ～ 12	45 ～ 70	–

  Normál ár (ÁFA nélkül):

  85.96 €～

  Normál feladási dátum:

  6 munkanapok

  Konfigurálás
• 

  • Volume Discount

  NS TOOL

  Power Solid End Mill NE-4

  4-flute blade with 45° high torsion

  További részletek

  Blade diameter (D)(φ)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Coating	Shank diameter (d)(mm)	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)
  3 ～ 6	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[○]	8 ～ 13	4	Square	Non-Coated	6	45 ～ 50	–

  Normál ár (ÁFA nélkül):

  74.53 €～

  Normál feladási dátum:

  6 munkanapok

  Konfigurálás
• 

  • Volume Discount

  NS TOOL

  Power Solid Long Blade End Mill NEL-3

  3-flute long blade with 45° high torsion

  További részletek

  Blade diameter (D)(φ)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Coating	Shank diameter (d)(mm)	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)
  6 ～ 20	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]	25 ～ 85	3	Square	Non-Coated	6 ～ 20	75 ～ 165	–

  Normál ár (ÁFA nélkül):

  120.62 €～

  Normál feladási dátum:

  8 munkanapok

  Konfigurálás
• 

  • Volume Discount

  NS TOOL

  MUGEN-COATING PREMIUM 2-Flute LEAD 45 End Mill MXH245

  Supports heat-resistant alloys such as stainless steel, titanium, etc. Deflection of machining surfaces has been minimized while employing an extra-long blade

  További részletek

  Blade diameter (D)(φ)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Coating	Shank diameter (d)(mm)	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)
  0.3 ～ 6	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]	1.5 ～ 30	2	Square	For High Hardness (Silicon Group)	4 ～ 6	45 ～ 75	–

  Normál ár (ÁFA nélkül):

  45.91 €～

  Normál feladási dátum:

  6 munkanapok

  Konfigurálás
• 

  • Volume Discount

  NS TOOL

  MHD645 MUGEN-COATING 6-Flute End Mill for Hardened Steel

  Ideal for finishing in high-hardness regions (48-65 HRC). Achieves precision finishing with little deflection

  További részletek

  Blade diameter (D)(φ)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Coating	Shank diameter (d)(mm)	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)
  5 ～ 12	General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Titanium[○]	10 ～ 30	6	Square	TiAlN	6 ～ 12	60 ～ 80	–

  Normál ár (ÁFA nélkül):

  100.28 €～

  Normál feladási dátum:

  6 munkanapok

  Konfigurálás
• 

  • Volume Discount

  NS TOOL

  MUGEN-COATING 2-Flute End Mill MSE245

  Adopts a unique Infinity coating for 2-flute end mill. Cutting Resistance Reduced Compared to 30° Torsion

  További részletek

  Blade diameter (D)(φ)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Coating	Shank diameter (d)(mm)	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)
  2 ～ 12	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	5 ～ 30	2	Square	TiAlN	4 ～ 12	45 ～ 80	–

  Normál ár (ÁFA nélkül):

  47.82 €～

  Normál feladási dátum:

  6 munkanapok

  Konfigurálás
• 

  DIJET

  Solid End Mill for Aluminum Machining AL-SEES3-XLS-R02 Type

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  További részletek

  Blade diameter (D)(φ)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Coating	Shank diameter (d)(mm)	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)
  6	Aluminum[◎]	9	3	Square	Non-Coated	5	100	–

  Normál ár (ÁFA nélkül):

  112.09 €

  Normál feladási dátum:

  6 munkanapok

  Konfigurálás
• 

  • Volume Discount

  GUHRING

  Square End Mill, Short, 2-Flute, for Aluminum 3310

  Carbide endmill dedicated for aluminum.

  További részletek

  Blade diameter (D)(φ)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Coating	Shank diameter (d)(mm)	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)
  3 ～ 20	–	–	2	Square	–	6 ～ 20	50 ～ 92	–

  Normál ár (ÁFA nélkül):

  33.10 €～

  Normál feladási dátum:

  6 munkanapok

  Konfigurálás
• 

  • Volume Discount

  GUHRING

  Square End Mill, Regular, 2-Flute, for Aluminum 3309

  Carbide endmill dedicated for aluminum.

  További részletek

  Blade diameter (D)(φ)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Coating	Shank diameter (d)(mm)	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)
  3 ～ 20	–	–	2	Square	–	6 ～ 20	57 ～ 104	–

  Normál ár (ÁFA nélkül):

  41.18 €～

  Normál feladási dátum:

  6 munkanapok

  Konfigurálás
• 

  • Volume Discount

  GUHRING

  Square End Mill, Long, 2-Flute, for Aluminum 3358

  Carbide endmill dedicated for aluminum.

  További részletek

  Blade diameter (D)(φ)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Coating	Shank diameter (d)(mm)	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)
  5 ～ 16	–	–	2	Square	–	5 ～ 16	75 ～ 150	–

  Normál ár (ÁFA nélkül):

  79.29 €～

  Normál feladási dátum:

  24 munkanapok

  Konfigurálás
• 

  • Volume Discount

  GUHRING

  High Helix Square End Mill Short 3-Flute 3540

  High torsion provides an excellent finished surface. Excellent cost performance. with a price set even lower than 2-flute blades.

  További részletek

  Blade diameter (D)(φ)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Coating	Shank diameter (d)(mm)	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)
  6 ～ 16	–	–	3	Square	–	6 ～ 16	54 ～ 82	–

  Normál ár (ÁFA nélkül):

  41.18 €～

  Normál feladási dátum:

  8 munkanapok

  Konfigurálás
• 

  • Volume Discount

  GUHRING

  High Helix Square End Mill Stub 3-Flute 3686

  The total length has been set short, making it ideal for use with automatic lathes. High torsion provides an excellent finished surface. Excellent cost performance. with a price set even lower than 2-flute blades. Those with φ2 or more have flats on the shank.

  További részletek

  Blade diameter (D)(φ)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Coating	Shank diameter (d)(mm)	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)
  6	–	–	3	Square	–	6	45	–

  Normál ár (ÁFA nélkül):

  41.18 €

  Normál feladási dátum:

  8 munkanapok

  Konfigurálás
• 

  • Volume Discount

  GUHRING

  High Helix Square End Mill Regular 3-Flute 3636

  High torsion provides an excellent finished surface. Suitable for a wide range of machining from raw materials to difficult-to-cut materials.

  További részletek

  Blade diameter (D)(φ)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Coating	Shank diameter (d)(mm)	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)
  1 ～ 20	–	–	3	Square	–	3 ～ 20	38 ～ 104	–

  Normál ár (ÁFA nélkül):

  44.06 €～

  Normál feladási dátum:

  6 munkanapok

  Konfigurálás
• 

  • Volume Discount

  GUHRING

  Unequal Lead End Mill for High Efficiency Finishing, Long, 5-Flute RF100S / F 3897

  Variable division blade allows stable machining without chattering.

  További részletek

  Blade diameter (D)(φ)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Coating	Shank diameter (d)(mm)	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)
  4 ～ 20	–	12 ～ 60	5	Square	–	4 ～ 20	65 ～ 126	23 ～ 76

  Normál ár (ÁFA nélkül):

  101.40 €～

  Normál feladási dátum:

  6 munkanapok

  Konfigurálás
• 

  • Volume Discount

  KYOCERA

  Axel Mill, High Feed High Efficiency Type, 4MFK (Square Type)

  Unique variable distribution and lead allow excellent chatter resistance.

  További részletek

  Blade diameter (D)(φ)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Coating	Shank diameter (d)(mm)	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)
  10	General Steel[◎] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○]	25	4	Square	For General Steels (AlCrN, etc.)	10	80	–

  Normál ár (ÁFA nélkül):

  133.50 €

  Normál feladási dátum:

  8 munkanapok

  Konfigurálás
• 

  KYOCERA

  Axel Mill, High Feed High Efficiency Type, 4MFR (Radius Type)

  Unique variable distribution and lead allow excellent chatter resistance.

  További részletek

  Blade diameter (D)(φ)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Coating	Shank diameter (d)(mm)	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)
  8	General Steel[◎] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○]	19	4	Square	For General Steels (AlCrN, etc.)	8	70	–

  Normál ár (ÁFA nélkül):

  115.04 €

  Normál feladási dátum:

  6 munkanapok

  Konfigurálás
• 

  KYOWA SEIKO

  Endmill with 2 Carbide Flutes for Aluminum Alloys Short Type ALES-2DLC

  [Specifications]· Shape: Square End Mill (carbide)· Coating: DLC· Work Materials: Aluminum [◎], Copper [◎][Applications] Flat Surfaces / Side Surfaces / Grooves / Plunging (Z feed) / Countersinking

  További részletek

  Blade diameter (D)(φ)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Coating	Shank diameter (d)(mm)	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)
  1 ～ 16	Aluminum[◎] / Copper[◎]	2 ～ 32	2	Square	DLC	4 ～ 16	45 ～ 100	–

  Normál ár (ÁFA nélkül):

  70.68 €～

  Normál feladási dátum:

  8 munkanapok

  Konfigurálás
• 

  KYOWA SEIKO

  Endmill with 3 Carbide Flutes for Aluminum Alloys ALE-3DLC

  [Specifications]· Shape: Square End Mill (carbide)· Coating: DLC· Work Materials: Aluminum [◎], Copper [◎][Applications] Flat Surfaces / Side Surfaces / Grooves / Plunging (Z feed) / Countersinking

  További részletek

  Blade diameter (D)(φ)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Coating	Shank diameter (d)(mm)	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)
  3 ～ 16	Aluminum[◎] / Copper[◎]	9 ～ 48	3	Square	DLC	6 ～ 16	60 ～ 110	–

  Normál ár (ÁFA nélkül):

  100.28 €～

  Normál feladási dátum:

  8 munkanapok

  Konfigurálás
• 

  • Volume Discount

  SANDVIK

  End Mill For Roughing & Semi-Finishing VFD

  Blade diameter (D)(φ)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Coating	Shank diameter (d)(mm)	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)
  16 ～ 25	General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	36 ～ 54	4 ～ 5	Square	TiCN	16 ～ 25	104 ～ 156	52 ～ 99

  Normál ár (ÁFA nélkül):

  615.93 €～

  Normál feladási dátum:

  8 munkanapok

  Konfigurálás
• 

  • Volume Discount

  SANDVIK

  End Mill For Roughing & Semi-Finishing (Double Fluted) Cylindrical Shank With Corner Radius

  Blade diameter (D)(φ)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Coating	Shank diameter (d)(mm)	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)
  4 ～ 20	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	11 ～ 38	3 ～ 4	Square	TiCN	6 ～ 20	57 ～ 125	–

  Normál ár (ÁFA nélkül):

  152.70 €～

  Normál feladási dátum:

  6 munkanapok

  Konfigurálás
• 

  • Volume Discount

  SANDVIK

  End Mill For Roughing & Semi-Finishing (Center Cut / Double Fluted) Hardness: 43 ≦ HRC ≦ 63

  [Features]A solid end mill for maximum productivity with all types of work material and machining processesThe double-fluted shape ensures both rigidity and the effective handling of cutting chipsFor end milling of all types of work material

  További részletek

  Blade diameter (D)(φ)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Coating	Shank diameter (d)(mm)	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)
  2 ～ 20	General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	7 ～ 38	3 ～ 4	Square	TiCN	6 ～ 20	57 ～ 125	–

  Normál ár (ÁFA nélkül):

  121.10 €～

  Normál feladási dátum:

  6 munkanapok

  Konfigurálás
• 

  • Volume Discount

  SANDVIK

  Weldon Rounded End Mill (Double Flute), for Rough Machining and Medium Finishing

  Blade diameter (D)(φ)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Coating	Shank diameter (d)(mm)	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)
  6 ～ 20	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	13 ～ 38	4	Square	TiCN	6 ～ 20	57 ～ 104	–

  Normál ár (ÁFA nélkül):

  135.14 €～

  Normál feladási dátum:

  6 munkanapok

  Konfigurálás
• 

  • Volume Discount

  SANDVIK

  End Mill For Roughing & Semi-Finishing (Double Fluted), Weldon Shank

  [Features]A solid end mill for maximum productivity with all types of work material and machining processesThe double-fluted shape ensures both rigidity and the effective handling of cutting chipsFor end milling of all types of work material

  További részletek

  Blade diameter (D)(φ)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Coating	Shank diameter (d)(mm)	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)
  6 ～ 20	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	13 ～ 38	4	Square	TiCN	6 ～ 20	57 ～ 104	–

  Normál ár (ÁFA nélkül):

  125.35 €～

  Normál feladási dátum:

  6 munkanapok

  Konfigurálás
• 

  • Volume Discount

  OKAZAKI SEIKO

  SPSEE3ZA SP Series Roughing Mill 3 Flutes / OK Coated

  A non-stepped vertical feed reinforced end mill that enables vertical feeding going straight on to grooving.

  További részletek

  Blade diameter (D)(φ)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Coating	Shank diameter (d)(mm)	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)
  2 ～ 20	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○]	4 ～ 40	3	Square	TiAlN	4 ～ 20	45 ～ 105	–

  Normál ár (ÁFA nélkül):

  25.21 €～

  Normál feladási dátum:

  6 munkanapok

  Konfigurálás
• 

  • Volume Discount

  OKAZAKI SEIKO

  SPSEE4GA SP Series Steel Power Mill 4 Flutes / OK Coated

  End mill with a unique reinforced blade type with good chip discharge properties that enables heavy duty cutting and high speed machining.

  További részletek

  Blade diameter (D)(φ)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Coating	Shank diameter (d)(mm)	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)
  3 ～ 20	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○]	10 ～ 45	4	Square	TiAlN	6 ～ 20	45 ～ 105	–

  Normál ár (ÁFA nélkül):

  30.50 €～

  Normál feladási dátum:

  8 munkanapok

  Konfigurálás
• 

  • Volume Discount

  SANDVIK

  CoroMill Plura End Mill For Roughing & Semi-Finishing R215.34 (Hardness < 48 HRC)

  Blade diameter (D)(φ)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Coating	Shank diameter (d)(mm)	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)
  6 ～ 20	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	13 ～ 38	4	Square	TiCN	6 ～ 20	57 ～ 104	–

  Normál ár (ÁFA nélkül):

  165.56 €～

  Normál feladási dátum:

  6 munkanapok

  Konfigurálás
• 

  • Volume Discount

  SANDVIK

  CoroMill Plura End Mill For Roughing & Semi-Finishing R216-P (Hardness 48 HRC Max.)

  Blade diameter (D)(φ)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Coating	Shank diameter (d)(mm)	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)
  10 ～ 20	General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	22 ～ 44	4	Square	TiCN	10 ～ 20	100 ～ 150	42 ～ 100

  Normál ár (ÁFA nélkül):

  284.88 €～

  Normál feladási dátum:

  6 munkanapok

  Konfigurálás
• 

  • Volume Discount

  SANDVIK

  CoroMill Plura End Mill For Roughing R216

  Blade diameter (D)(φ)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Coating	Shank diameter (d)(mm)	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)
  16 ～ 25	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	32 ～ 45	6 ～ 8	Roughing	TiCN	16 ～ 25	92 ～ 156	–

  Normál ár (ÁFA nélkül):

  801.91 €～

  Normál feladási dátum:

  8 munkanapok

  Konfigurálás
• 

  • Volume Discount

  SANDVIK

  CoroMill Plura End Mill For Finishing, Cylindrical Shank With Corner Radius

  Blade diameter (D)(φ)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Coating	Shank diameter (d)(mm)	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)
  3 ～ 20	General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○]	8 ～ 38	4 ～ 8	Square	TiCN	6 ～ 20	57 ～ 104	–

  Normál ár (ÁFA nélkül):

  126.95 €～

  Normál feladási dátum:

  6 munkanapok

  Konfigurálás
• 

  • Volume Discount

  SANDVIK

  CoroMill Plura End Mill For Finishing, Cylindrical Shank

  Blade diameter (D)(φ)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Coating	Shank diameter (d)(mm)	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)
  3 ～ 16	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	8 ～ 32	4 ～ 6	Square	TiCN	6 ～ 16	57 ～ 92	–

  Normál ár (ÁFA nélkül):

  105.09 €～

  Normál feladási dátum:

  6 munkanapok

  Konfigurálás
• 

  • Volume Discount

  SANDVIK

  CoroMill Plura End Mill For Finishing Without End Cutting Edge, Cylindrical Shank

  Blade diameter (D)(φ)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Coating	Shank diameter (d)(mm)	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)
  3 ～ 20	General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○]	8 ～ 38	4 ～ 8	Square	TiCN	6 ～ 20	57 ～ 104	–

  Normál ár (ÁFA nélkül):

  115.61 €～

  Normál feladási dátum:

  6 munkanapok

  Konfigurálás
• 

  • Volume Discount

  SANDVIK

  General-Purpose CoroMill Plura End Mill For Extreme Roughing & Finishing, 1P341-XA (Hardness 48 HRC Max.)

  Blade diameter (D)(φ)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Coating	Shank diameter (d)(mm)	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)
  3 ～ 12	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	8 ～ 26	4	Square	–	6 ～ 12	57 ～ 83	–

  Normál ár (ÁFA nélkül):

  108.92 €～

  Normál feladási dátum:

  8 munkanapok

  Konfigurálás
• 

  • Volume Discount

  SANDVIK

  General-Purpose CoroMill Plura End Mill For Extreme Roughing, 1P330-XA (Hardness 48 HRC Max.)

  Blade diameter (D)(φ)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Coating	Shank diameter (d)(mm)	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)
  6	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	10	3	Square	–	6	57	–

  Normál ár (ÁFA nélkül):

  109.60 €

  Normál feladási dátum:

  8 munkanapok

  Konfigurálás