Nylon Connectors（Representative Standard：UL Page 2）

?* Information on days to ship and prices

• 

  Male Header with Solder Pin / 733 Series, Grade 1 / Right Angle / 2.5mm Pitch

  WAGO

  [Features]
  　● Can be horizontally or vertically mounted on a printed circuit board using a header with right angle solder pins.
  　● Model that makes incorrect insertion impossible: Only matches with the same number of terminals can be latched.
  　● An accessory coding key can be attached.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.84 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Spring Type Connector, Mismatch Prevention Type, 721 Series, 5 mm Pitch, Female with Lock Mechanism

  WAGO

  Male side can be connected to 721-600 series connectors with the female spring connector side with lock mechanism, and the corresponding circuit board can be connected to 5 mm pitch 721-100 series/400 series connectors.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	4.73 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  VL Connector (For Relay Connections)

  JST (JST MANUFACTURING)

  6.2‑mm pitch connector for relays. Panel lock. Rated: MAX 20 A, MAX 600 V.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.92 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Easy Lock Connector 110 Series【500 Pieces Per Package】

  NICHIFU TERMINAL INDUSTRIES

  A newly developed lock mechanism inside the connector enables the connector to be gently and securely installed in tab terminals. (110 Series)
  
  [Features]
  · Uses a newly developed locking mechanism.
  · Enables a reliable and highly safe connection by the motion of a locking mechanism where part of the terminal is a spring, thus preventing loss of connection caused by vibration or pulling out the electrical line.
  · Soft-touch.
  · Gentle and smooth mounting on tab terminals, dramatically reducing burden on workers and greatly improving workability.
  · Also easy to remove.
  · The connector can be easily pulled out by sliding the housing to release the lock mechanism.
  · Soft-touch allows worker burden to be reduced in the same way as for mounting the connector.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	81.22 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Plug Type Wire Connector【50 Pieces Per Package】

  NICHIFU TERMINAL INDUSTRIES

  Pluggable wire connector for indoor wiring. Has a highly reliable, 2-point contact spring structure. The transparent cover enables the wires to be visually checked.
  
  [Features]
  · A highly safe, soft-touch product that utilizes an easy-lock connector mechanism.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	17.41 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  D4000 Series

  TE CONNECTIVITY

  The D4000 series is optimal for 20A commercial power supply line use.
  
  [Features]
  • Small high current contact point: By increasing the number of contact areas, this newly designed contact point ensures Hertzian stress is divided among 4 contact positions.
  • This not only provides current capacity (rated for 20A maximum), but also increases reliability tremendously.
  • Sequential contact: When circuits are electrified through static electricity or other currents, this product can be used to perform mating via a sequential process, initially by grounding the mating site.
  • Long tab was developed for sequential connection use with tab contacts.
  • By using this long tab in combination with a normal tab contact, a sequential connection environment architecture can be created.
  • High current tine (lead): This type of tine (lead) mounts to a circuit board, and is a newly developed folding V-shaped tine.
  • Although the joining area with the circuit board is wide, the through hole is extremely small, and this allows for easy pattern routing (patent pending).
  • Lock feeling: The clear locking sound and vibration that are apparent to the operator during mating ensure that work can be completed even in environments where visual inspection is not possible, without producing any malfunctions such as incomplete mating (partial mating).
  • Keying: The housing has a keying (slit) installed, and by using X keys and Y keys for different purposes, improper mating can be prevented.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.03 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  D5000 Series

  TE CONNECTIVITY

  A D-5000 Series connector for use with equipment main power supply lines.
  
  [Features]
  · High-current contact: Utilizes a box-shaped contact concept that has high torsional strength based on the Dynamic Series heritage and track record.
  · By using the same kind of newly developed copper alloy in the D-3000 Series, these connectors have excellent elasticity and conductivity characteristics with reliable receptacles and contacts.
  · The silver-plated type D-5000α Series has also been added to cover even higher current ranges.
  · The contacts can be selected to match the application.
  · Sequential contact: Allows sequential coupling to initially ground charged static electricity prior to contact coupling.
  · The long tab was developed for sequential coupling of tab contacts.
  · By using this long tab in combination with the regular tab contacts, it is possible to construct a sequential connection environment.
  · High current tines (lead): This type of tine (lead) mounts to a circuit board.
  · A newly developed twin lead type.
  · This product secures a large joining area with PCBs. Therefore, this enables a reliable pattern and connector connection.
  · IP20 (finger safety protection): The reverse-mount type D-5300 is recommended for applications with live equipment components.
  · By using a housing that can house the equipment (panel side) receptacles and contacts, the equipment connector satisfies the IP20 standard.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.14 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  D2000 Series

  TE CONNECTIVITY

  The D-2000 Series remains small while satisfying specifications for industrial equipment.
  
  [Features]
  Twist-resistant terminal and housing structure: The box shaped recessed contacts are twist-resistant. The housing slits also prevent diagonal mating. This contributes to increased reliability.
  Effective mating length: By securing a long and effective mating length, the demands of industrial equipment can be met with high reliability.
  Applicable wires: This product can be used with AWG18 wires that are widely used in the industrial equipment sector.
  · Lock filling: A distinct locking sound and vibration are transferred to the worker when mating the connector. This makes it possible to complete work without coupling errors (half-mating) even when working in low-visibility environments.
  · Keying: The keying (slit) in the housing is provided to prevent coupling errors by distinguishing X keys from Y keys. Additional key patterns can be created by using a keying plug.
  · Center locking format: When high-density signal line mountings on circuit boards are required, the footprint on the circuit board can be minimized by mounting narrow-pitch connectors.
  · Drawer type: The drawer type has been developed so that each side of the connector has a floating construction. This is as an application that is aimed toward meet the requirements of blind mate connections. The maximum number of pins for the Series is 50P. Using this connector unit-to-unit blind mate connections are possible.
  · Hybrid type: This type can house the signal lines in the D-2000 contacts and the power line in the D-3000 contacts. The D-2600 Series can bundle the signal and power lines into a single connector. This contributes to the footprint of the circuit board and improve maintainability.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.57 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  OK Connector for in-Room Insertion Wiring.

  OHM ELECTRIC

  Nothing required for crimping; simply insert the copper wire to complete the connection.
  
  [Features]
  ・Nothing required for crimping.
  ・Simply insert the copper wire to complete the connection.
  ・Wires can be removed and the connection can be changed easily.
  ・Stable connection without individual discrepancies.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.26 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  BL 3.50 Series

  WEIDMUELLER

  Pluggable PCB connection with innovative connection technology for safe and intuitive handling.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.43 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  BLC 5.08 mm Series

  WEIDMUELLER

  Series BLC, pitch 5.08 mm, female connector with crimp connection system

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.77 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Commercial Mate-N-Lok Connector

  TE CONNECTIVITY

  The entire nylon connector is small and lightweight while also being economical and able to increase equipment density.
  [Features]
  ·Nylon housing with plug polarity.
  ·The contact hole is easy to identify with a stable self-centering mechanism built in.
  ·The locking mechanism is completely built into the housing design.
  ·Keeps both halves of the connector securely in place during intense vibration and shock.
  ·Connector is small, lightweight and capable of increasing equipment density.
  [Applications]
  ·Household appliances, office equipment, automobiles and other vehicles.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.30 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Dynamic HTS Module

  TE CONNECTIVITY

  [Features]
  · The Dynamic Series of connectors have been developed heavy duty waterproofing applications.
  · All Dynamic Series connectors are mountable from the inside of control panels to the panel exterior.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.04 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Mini Universal Mate-N-Lok Connector【1-20 Pieces Per Package】

  TE CONNECTIVITY

  Small connector that facilitates high density wiring inside equipment.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.56 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  CL Connectors【1-500 Pieces Per Package】

  JST (JST MANUFACTURING)

  These are connectors that allow branching and short-circuit low resistance connections using simple tools such as pliers.
  
  [Features]
  ・ Insulation displacement connection is possible by simple operation.
  ・There is no need to strip the electrical wire sheathing when connecting.
  ・ No special tool is required. The internal contact (fork-shaped contact) is securely pressed against the electrical wire. The connection can be completed by simply clamping the connector body using pliers, etc.
  ・Superior insulation performance.
  ・Insulating the connecting section is not required.
  ・The pre-installed housing provides highly reliable insulating effectiveness.
  ・Mechanism for temporarily securing electrical wires.
  ・Includes a built-in mechanism for temporarily securing electrical wires to prevent wire-slip or connection errors when connecting wires.
  ・ Workability has been improved.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.95 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  EL Connector (relay connection connector)【10-100 Pieces Per Package】

  JST (JST MANUFACTURING)

  4.5 mm pitch relay connection nylon connector.
  [Features]
  ·Rated current: MAX 10 A (AC/DC), rated voltage: MAX 300 V (AC/DC).
  ·Applicable wire range: AWG #26 to #16.
  ·Insert 2 wires into the contacts to crimp 2 crimp contacts.
  ·Compatible with the discontinued ML connector.
  ·Panel mountable.
  [Applications]
  ·Used for household appliance, game machine and lighting equipment signal relay connection, etc.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	4.86 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  NH Connector【50 Pieces Per Package】

  JST (JST MANUFACTURING)

  The post with base has three types: top, side and bottom. Electrical entry is possible in three directions: at right angles to the board (up or down) or parallel to the board.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	5.21 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  PH Connector【1-1,000 Pieces Per Package】

  JST (JST MANUFACTURING)

  This slim, low profile connector has been designed in response to requirements for higher density internal wiring.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.49 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  SH Connector

  JST (JST MANUFACTURING)

  Features a crimped design for the first time when it comes to having the smallest 1.0‑mm pitch for circuit board to wire connections. Made using a housing lance system for improved workability. The contacts are concentrated in close proximity for excellent contact reliability.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.19 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  VA Connector

  JST (JST MANUFACTURING)

  A connector that features ample connection performance with a wide range of circuits including primary power supply circuits. Despite its large capacity it also boasts a compact design with a 17.5‑mm circuit board mounting height.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.45 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  XA (for PCB) Connector【1-250 Pieces Per Package】

  JST (JST MANUFACTURING)

  This connector has a strong locking mechanism to prevent the housing from coming off, and to prevent mis-insertion when mating.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.86 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  XH Connector【1-50 Pieces Per Package】

  JST (JST MANUFACTURING)

  Based on the high reliability and versatility of the NH series, this connector has been designed to be smaller, with a mounting height of 9.8 mm.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.55 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Wire to Wire Connector Housing with 2.00 mm Pitch (51006)

  MOLEX

  This is a Molex single-row connector for low pin count. (Mating housing: 51005, conforming terminal: 50012)

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.60 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Wire-to-Wire Plug Housings with 2.50-mm Pitch (51198)

  MOLEX

  [Features]
  • Housing 51103 for Molex fittings; can fit Mini-Locks.
  · Number of leads: 2 to 15 leads.
  • Housing lance.
  • Includes flanges for panel mounting.
  • Panel thickness: 0.8 - 2.0 mm compatible.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.19 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  2.5 mm Pitch Wire-to-Wire Connector Housing (51111)

  MOLEX

  A 2.5 mm pitch wire-to-wire nylon connector.
  [Features]
  · Retainer-compatible types available.
  [Applications]
  · Optimal for consumer devices such as signal, wire-to-board and wire-to-wire types.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.11 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  3.50-mm Pitch Wire-to-Board Wafer Straights (53258)

  MOLEX

  [Features]
  · Molex wire-to-board connector.
  • Straight type (fits housing 51067).
  · Number of leads: 2 to 15 leads.
  • Phosphor bronze: 53258-30.
  • Brass: 53258-29.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.19 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  3.50-mm Pitch Wire-to-Board Wafer Right-Angles (53259)

  MOLEX

  [Features]
  · Molex wire-to-board connector.
  • Right angle type (fits housing 51067).
  · Number of leads: 2 to 15 leads.
  • Phosphor bronze: 53259-17; Brass: 53259-29.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.54 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Wire to Board Connector Housing with 3.50mm Pitch (51067)

  MOLEX

  [Features]
  · Molex wire-to-board connector.
  • Housing (compatible wafers: 53258, 53259, and 53265).
  · Number of leads: 2 to 15 leads

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.09 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  4.80 mm Pitch Minifit Relay Terminal Housing (5025, Receptacle)

  MOLEX

  Molex terminals are completely protected by the housing's insulation wall. (Mating housing: 5025Plig, conforming terminal: 5005)

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.17 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  C-Grid® Made Product（70022）

  MOLEX

  A Molex 2.54 mm pitch double-row connector for board-to-board connections. Available in straight and right angle types. (Mating housing: 70066)

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.28 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  C-Grid® Product (70568)

  MOLEX

  Molex 2.54-mm pitch double-row connector for board-to-board connections. Available in straight and right angle types.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	6.12 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  KK® Interconnection System Wafer Angle Type (5046)

  MOLEX

  [Features]
  An ever-popular Molex connector for wire-to-circuit board connections. Angled type. (Mating housing: 5051/51191)

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.25 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  KK® Interconnection System Wafer Straight Type (5045)

  MOLEX

  [Features]
  An ever-popular Molex connector for wire-to-circuit board connections. Straight type. (Mating housing: 5051/51191)

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.62 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  KK® Interconnection System Housing (5051)

  MOLEX

  [Features]
  An ever-popular Molex connector for wire-to-circuit board connections. Housing (Mating wafers: 5045/5046, conforming terminal: 5159)

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.09 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  MicroBlade™ 2.00 mm Pitch Straight Wafer for Circuit Boards (51004)

  MOLEX

  [Features]
  A highly-reliable Molex product with a box type terminal and a straight and right angled flexible design. Straight type (Mating housing: 51004)

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.56 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  MicroBlade™ 2.00 mm Pitch Circuit Board Angle Wafer (51005)

  MOLEX

  [Features]
  A highly-reliable Molex product with a box type terminal and a straight and right angled flexible design. Angle type (mating housing: 51004)

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.88 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  MicroBlade™ 2.00 mm Pitch PCB Housing (51004)

  MOLEX

  A highly-reliable Molex product with a box type terminal and a straight and right angle flexible design. Friction lock type. Terminal (compatible terminal: 50011, mating wafers: 53014/ 53015/ 53025)

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.11 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  MicroClasp® 2.0 mm Pitch Circuit Board Wafer (55917)

  MOLEX

  [Features]
  A space-saving Molex product that offers easier removal than other similar 2.00 mm (.079") and 2.50 mm (.098") pitch wire-to-circuit board connection systems. (Mating housing: 51353)

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.76 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  MicroClasp® 2.0 mm Pitch Circuit Board Housing (51353)

  MOLEX

  A space saving Molex product that offers easier removal than other similar 2.00 mm (.079") and 2.50 mm (.098") pitch wire-to-circuit board connection systems. (Mating wafers: 55917/55959 conforming terminal: 56134)

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.26 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micro-Fit 3.0 Connector (43045)

  MOLEX

  [Features]
  · Molex 3.00 mm pitch connector. Available in a variety of wire-to-wire, wire-to-board and board-to-board coupling configurations and number of pins.
  · Maximum rated current: 5.0 A. Brand name compatible products are also available. A header for boards (compatible housing: 43025).
  [Specifications changed in June 2015. Gloss plating ⇒ non-gloss plating. This eliminates the terminal gloss. There are no changes in the specifications.]

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.90 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micro-Fit 3.0 Connector (43640)

  MOLEX

  [Features]
  · Molex 3.00 mm pitch connector. Available in a variety of wire-to-wire, wire-to-board and board-to-board coupling configurations and number of pins. Maximum rated current: 5.0 A. Brand name compatible products are also available. (Compatible housing: 43645)

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.90 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Milli-Grid™ Connector System (87831)

  MOLEX

  2.00 mm pitch Molex product with several variations for board-to-board, wire-to-board, and FFC-to-board. Contributes to flexibility of design. (Compatible housing: 51110)

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	2.35 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Mini-Fit Sr. Power Connector (42816)

  MOLEX

  A Molex 10.00 mm pitch wire-to-board, wire-to-wire connector. Maximum current: 50.0 A (2-circuit, applicable wire size: 8 AWG). (Compatible terminal: 42815, compatible housing: 42818)

  Select to compare

  Configure now
  Starting from∗ ：	1.67 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Mini-Fit Sr.™ Power Connector (42818)

  MOLEX

  Molex 10.00-mm pitch connector for wire-to-wire and wire-to-circuit board connections. Maximum current with 2 pole devices and appropriate wire size is 50.0 A for 8AWG. (Conforming terminal: 42817 mate housing: 42816).

  Select to compare

  Configure now
  Starting from∗ ：	1.31 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Mini-Lock™ 2.50 mm Pitch Wire-to-Circuiboard Wafer (53375)

  MOLEX

  Molex types are available in both straight and right angled types. Wire-to-wire optional parts are also available. This product has a high mating workability on the fitting guide wall. Straight type (Mating housings: 51102 / 51103 / 51163)

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.16 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

Loading...