Square Connectors（Connector Shape：Square shape）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
- Promotional pricing ends 30/11/2024
PCR Series
HONDA TSUSHIN KOGYO
Bellows, high-density contact type and accessories are, as with the PCS series, applicable to various uses.
[Features]
· A wide range of cores of 20 to 96 are available from the board to the cable.
· For EMI measures other than FCC.
· A wide range of cores of 20 to 128 are available from board to board.
· Products enabling live wire connection (three steps) are available.
· Parallel mating is feasible through a housing guide mechanism and the structure prevents shorting between adjacent contacts.
· Ideal for connection to horizontal, parallel, and vertical backs.- Volume Discount
Configure nowStarting from∗ ： 4.64 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
IL-AG7 Series
JAPAN AVIATION ELECTRONICS(JAE)
This pin connector has flanges to screw in to the board.
[Features]
・This pin connector has flanges on both sides of the insulator to screw in to the board.
・By screwing in using the flanges, it can be fixed more firmly to the board.
・The straight type is molded to alleviate stress on the soldered parts, which prevents cracking of solder due to changes in temperature.
・This prevents differences in expansion coefficient between the board and insulator due to rapid temperature changes, and solder cracking caused by vibration.
・The conformation of the fitting element and color are different from the standard type (standard: green, mismatch prevention: light blue), so the product is ideal for use when two connectors are used next to each other with the same number of poles.- Volume Discount
Configure nowStarting from∗ ： 2.43 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
57 Series Soldering / DIP-Type Connector
FUJIKURA (DDK)
A 2.159-mm pitch ribbon-type connector for soldering. These are the core of the 57 family of connectors, which are available in 5 types.
[Features]
■ This 57 Series forms the core of the 57 family of DIP connectors. The following 5 types are available.
· 57-10 type (unit connection plug).
· 57-20 type (unit connection receptacle).
· 57-30 type (plug with straight hood for cables).
· 57-40 type (panel receptacle with locking spring).
· 57-60 type (cable relay receptacle).- Volume Discount
Configure nowStarting from∗ ： 5.41 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Half-Pitch I / O Connector (for Fanuc Servo Amps), FI Series
HIROSE ELECTRONIC
This is a Fanuc CNC and servo I/O connector. Selectable between press-weld connections and solder connections.
[Features]
・Terminal device is effectively made smaller with the 1.27 mm connector space pitch.
・Aversion to prying and soft insertion/extraction is achieved with a ribbon-type terminal construction.
・The case is split in the center of the cable guide opening and integrated with 4 fixing hooks for easy work.
・ The lock mechanism utilizes a single-action lock format for easy attachment and detachment.
・In addition to the easy-to-use pressure-type connection, there is also a solder type for making connections with every other type of wire.- Volume Discount
Configure nowStarting from∗ ： 5.01 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
MX19 Series
JAPAN AVIATION ELECTRONICS(JAE)
[Features]
· A connector for small waterproof wire relays applicable to JISD0203S.- Volume Discount
Configure nowStarting from∗ ： 2.27 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
D-Sub, D02, D02-M15 Series
JAPAN AVIATION ELECTRONICS(JAE)
A small, lightweight, highly reliable connector for making every type of electronic device smaller and more dense to support advanced features.
[Features]
・The D-sub connector is becoming the standard with its combination of pin and socket connector types.
・Interchangeable with different connector types and commonly used accessories.
・The shell joint shape has polarity, fully preventing accidental reverse insertion.
・The DO2 series is a high-density mounting connector with approximately twice as many contacts inside the same shell size as the D-sub.
・The outer appearance is short and compact. The contact and insulation material is contained in a hard, steel shell.
・There are 5 shell sizes (E, A, B, C, and D), which come with 9, 15, 25, 37, and 50 cores. Special arrays with coaxial and high-current contacts are also available.- Volume Discount
Configure nowStarting from∗ ： 1.59 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Misumi, Waterproof, E-Model Connector (Screw Wire Connection)
MISUMI
[Features] MIAutomatic SteelI's original, low-cost, environmentally resistant and waterproof E-type plug. Thanks to the cable's screw connection, it can be easily connected with a slotted screwdriver without the need for special tools. The screw connection is equipped with a contact. Please confirm the type and plug or socket before ordering.- Volume Discount
- Order quantities extended (D-JIT)
- UL
- IP65
- For Power Supply
- For Signal
- Connection between Boards
- Connection in Boards
- Screw Type
- Insertion
- 2DCAD
- Silver-Plated
- 2D CAD data available
Configure nowStarting from∗ ： 12.29 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
MX23A Series, Contact
JAPAN AVIATION ELECTRONICS(JAE)
[Features]
· A small low-profile connector, which can be widely used in vehicles, motor bikes and other types of waterproof equipment.- Volume Discount
Configure nowStarting from∗ ： 6.71 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
CDA / CDC Common Use Screw Type and Crimp Type 16A / 250V Insert
ILME
CDA/CDC, Common use screw type and crimp type, 16A / 250V, insert
[Features]
・CDA/CDC.
・General-use screw type, crimp type.
▪ 16A / 250V insert- Volume Discount
Configure nowStarting from∗ ： 20.48 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
17JE Series Soldering Type Connector
FUJIKURA (DDK)
17 Series (Dsub type) soldering connection type square connector for cable equipment.
[Features]
· Square connector for solder wire connections, with solder cup type contact.
· Ni plating is used for the metal shell surface treatment, and the pin connector is bead treated.
· The hood is metalized plastic, which provides weight reduction and a high shielding effect.
· Either the pin connector or the socket connector can be selected.
· There are 4 shell sizes: 9, 15, 25, and 37. The core counts are 9 cores, 15 cores, 25 cores, and 37 cores.
· The cable and plug wire connection can be shielded with a metalized hood, which is effective as an EMI measure.
[Applications]
· Can be used as an interface for equipment and devices. Optimal for use on twisted wire of AWG22 or less.- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 4.30 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Han Series Hood / Housing
HARTING
Han Series Hoods/Housings.
[Features]
· Shielded through various locking mechanisms to provide high reliability suitable for industrial use.
· Superior nature of materials and design have been recognized in the past 10 years.
· HanA and HanB products have become a standard in the industrial field.
[Applications]
· Ideal for industrial use.- Volume Discount
Configure nowStarting from∗ ： 5.07 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Configure nowStarting from∗ ： 1.56 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
![[Enclosure]C Type IP66, Rotary Lever Series](//content.misumi-ec.com/image/upload/f_auto,t_product_view_b/v1/p/jp/product/series/222302286007/222302286007_003_20230801115838.jpg)
[Enclosure]C Type IP66, Rotary Lever Series
ILME
Ilme's traditional lever C type
It is a standard enclosure of Ilme connector.
A uniquely developed rotary lever enables smooth attachment and detachment.
Stainless steel levers and springs ensure safe and secure fitting and airtightness.
The manufacturer will flexibly respond to various on-site needs with the manufacturer's wide lineup.
Further notes: It is a slim type that contributes to the miniaturization of equipment and supports all connection types.- Volume Discount
Configure nowStarting from∗ ： 6.26 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
PCR Series Case
HONDA TSUSHIN KOGYO
This is a PCR series case.
[Features]
· A wide range of cores of 20 to 96 are available from the board to the cable.
· For EMI measures other than FCC.
· A wide range of cores of 20 to 128 are available from board to board.
· Products enabling live wire connection (three steps) are available.
· Parallel mating is feasible through a housing guide mechanism and the structure prevents shorting between adjacent contacts.
· Ideal for connection to horizontal, parallel, and vertical backs.- Volume Discount
Configure nowStarting from∗ ： 4.01 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
MR Series Case
HONDA TSUSHIN KOGYO
Case for the MR series.
[Features]
· Dual screw and a spring lock mechanism that can withstand any shock.
· Dust-proof mechanism with excellent environmental resistance.
· Optimal for device miniaturization via improvement of robustness, compactness, weight and density.
· A relay type case is also provided- Volume Discount
Configure nowStarting from∗ ： 3.45 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
D-Sub Connector (Ribbon Cable Pressure-Contact Wiring, Low Profile) FD*D Series
HIROSE ELECTRONIC
A ribbon/cable crimp connection type D-sub connector. Low height on the wiring side helps save space within the set.
[Features]
• Metal shell makes it compact and sturdy.
• Connectors can be mounted on the chassis, or on the front or back sides of the panel.
• Height of the wiring side is greatly reduced to facilitate more compact sets.
· The structure uses a piece of metal to secure the ribbon cable holding plate and is thus able to provide a strong securing force to secure the cable reliably.
• Standard 1.27 mm-pitch ribbon cable can also be pressure-contact connected by replacing the tool when the pitch is something other than the 1.38-mm pitch of the D-sub. (Note that in such cases, a tool that slits cable will be needed.)
• Discrete cables can also be pressure-contact connected by using a multi-core cable pressure-contact device.- Volume Discount
Configure nowStarting from∗ ： 7.33 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
MSM Series, Burndy Connector, Cable and Circuit Board Implementation Type
SOURIAU
MSM series, Burndy connector, Cable/circuit board implementation type
[Features]
▪ High-performance cable connector.
▪ This rectangular connector can be used for wire-to-wire and wire-to-board connections, and more.
▪ 8 types from 14 core to 75 core.
▪ Supports a wide variety of needs, with various lock types, jack screws, guiding pins, levers, and numerous cable clamps.
▪ The MSM Burndy connector is compliant with MIL-C-28748, NFC93426, and HE621-622.- Volume Discount
Configure nowStarting from∗ ： 14.36 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
D-Sub Connectors - XM2 / XM3
OMRON
[Features]
・ These are D-sub connectors that are ideal for OA equipment interfaces.
・ These are shielded connectors for EMI countermeasures.
・ Effective measures to counter noise have been realized through the use of a plastic hood (XM2S) which has undergone metallization processing.
・ The multi-hole ferrite core installation type (XM3B-F) is now available as a series also.
・ It is good as a countermeasure for noise in the high-frequency regions, and also allows for space savings on the circuit board.
・ A compact, sturdy type with a metal shell.
・ Various fasteners and ground conductor fittings are available.
▪ UL standard (File No.E103202) certified products are used as standard (except for XM2S and some products).- Volume Discount
Configure nowStarting from∗ ： 4.64 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
D-Sub Connectors XM3-L / XM2-L / XM4K / XM4L
OMRON
[Features]
・ This D-sub connector series has been renewed with lead-free compatible products.
・ The fastening screw diameter can be identified from its external appearance.
・ A solution to problems associated with combining fasteners has been found.
・ Shielded connectors for EMI countermeasures.
▪ This is a UL standard (File No.E103202) certified product (except for XM4Z type).- Volume Discount
Configure nowStarting from∗ ： 6.20 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Micromotor connector series
TE CONNECTIVITY
IP67-compliant compact connector optimal for equipment that requires water-proof performance.- Volume Discount
Configure nowStarting from∗ ： 11.05 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Misumi, Waterproof, DD-Model Connector (Crimp Wire Connection)
MISUMI
[Features] MIAutomatic steelIs original, low cost, environmentally resistant and waterproof DD connector. It is a highly reliable crimp connection that can reduce working time. A high density connector that can be integrated into Han-E series bonnets and sockets. Please check the plug or socket before ordering.- Volume Discount
- Order quantities extended (D-JIT)
- UL
- IP65
- For Power Supply
- For Signal
- Connection between Boards
- Connection in Boards
- Screw Type
- Insertion
- 2DCAD
- Silver-Plated
- 2D CAD data available
Configure nowStarting from∗ ： 14.74 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
PCS Series Cases
HONDA TSUSHIN KOGYO
PCS series case.
[Features]
• Board-to-cable cases are available for 20 - 96 contacts: Pressure contact connection is standard for cables (AWG #28 or 30), reducing wiring labor.
· A soldered type is also available.
• FCC and other EMI shielding: Sturdy construction is well suited for interfaces.
· Quick lock using metal lock spring.
· Models supporting panel relays are also available.
· Accessories for preventing incorrect insertion are also available.
• Wide range (34 - 150 contacts) of board-to-board connections available: Design minimizes insertions and extractions, even with a high number of contacts.
• Housings are structured so that all cleaning fluid drains out when cleaning away flux (mold-type male connectors).- Volume Discount
Configure nowStarting from∗ ： 8.79 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Board-to-Cable Connector with 1.25-mm Pitch - DF13 Series【1-10,000 Pieces Per Package】
HIROSE ELECTRONIC
Connector for board-to-cable connection with 1.25-mm pitch. Choose from a number of variations from 2–40 pin, straight-mount, right-angle mount, DIP, and SMT.
[Features]
· Small.
· A low-profile design with a mounting height of 5.8 mm. (The SMT mounting is a straight type, the DIP type is a straight 5.3-mm, and the right-angle type is 3.6-mm.)
· Multipole
· The dual-row type is a multipole connector with up to 40 pins. It is a high-density connector with a surface area of 30% compared to the single-row type.
· Supports automatic mounting.
· The header is available with a suction surface that supports vacuum suction . Therefore, automatic mounting using embossed packing is possible.
· Complete basic functionality despite compact form factor.
· The header includes a box structure to prevent twisting and ensure incorrect insertion is completely prevented.
· Additionally, the Surface Mount (SMT) header is fitted with a reinforcement bracket to prevent solder from peeling.
In-stock made-to-order products cannot be returned or canceled. Thank you for your understanding.- Volume Discount
Configure nowStarting from∗ ： 0.14 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
1 mm Pitch, 2-Row, Multi-Pin Circuit Board-to-Cable Connector, DF20 Series【100 Pieces Per Package】
HIROSE ELECTRONIC
[Features]
· This is a board-to-cable connector with dual-row, 1-mm pitch terminal pins.
· Contributing to a high-density board mounting.
In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.- Volume Discount
Configure nowStarting from∗ ： 13.76 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Discrete Wire Connector for Connection, DF1B Series (2.5 mm Pitch)【1-10,000 Pieces Per Package】
HIROSE ELECTRONIC
[Features]
· A new type of connector in which IDC terminals are inserted into the case.
· By using both crimp terminals and IDC terminals, wires with different current capacities can be used in the same case.
· Terminals can be replaced after connection, providing excellent maintainability.
· IDC part is protected by the case to provide a high level of reliability.
· No need for an expensive IDC machine as IDC work can be performed by simply replacing the applicator on a conventional crimping machine.
· High-profile headers are also available for supporting board potting (filling with resin) performed as a waterproofing measure.
· Single-row and double-row contact configurations with standard tin or gold plating for each of the “board-to-cable” and “in-line” series products.
[Applications]
· Convenient for various types of wiring.
· For all types of OA equipment, including copy machines and printers.- Volume Discount
Configure nowStarting from∗ ： 0.02 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
D-Sub Connector Plug Cases (EMI Shielded), CTH Series
HIROSE ELECTRONIC
These are EMI-shielded plug cases for D-sub connectors. • Because the ABS resin is plated, the connectors are lightweight, sturdy, and provide improved electromagnetic shielding.
[Features]
· Because the lock mechanism is a screw type mechanism it is rugged and reliable.
· Because the material properties call for plating a tough ABS resin, the resin is lightweight, solid, and provides an improved electromagnetic wave shielding effect.
· In order to improve the shield effect, the cable clamp is secured using 2 types of clamps on the shield part and the clamp has a configuration for pinching the plug cases together.
• Use screws to ground the drain wire of the cable with a clamp.
• Easily incorporated using solder (HD type), pressure contact (FD*D type) or crimping (CD type).
• For FD*D, however, wire a fused I/O cable when using the case.
• CTH-type plug cases use UL94HB ABS resin and the plating conforms to the UL746C standard.- Volume Discount
Configure nowStarting from∗ ： 11.49 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Half-Pitch Multifunction Two-Piece Connector FX2 Series
HIROSE ELECTRONIC
Combination offers various connections for board-to-board (stacking, horizontal, vertical) and ribbon cable connections.- Volume Discount
Configure nowStarting from∗ ： 2.05 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Rack and Panel Connector QR / P1 Series【1-100 Pieces Per Package】
HIROSE ELECTRONIC
Compact, high-density mounted, rectangular multipole rack/panel plug-in connector QR/P. Compact crimp terminals divided into power supply and signal use.
[Features]
· The terminals have smooth insertion and removal feel, and stable contact pressure is achieved by point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.
· The terminals are made compact by segregating according to those for power and those for signals.
· The housing internal pinout has pin 12 opposing pin 2 on one side, pins 8, 24 opposing pin 2 on both sides (total: 4 pins), and pin 32 opposing pin 3 on one side (total: 6 pins) with a greater distance of separation from other pins. These terminal pins feature a creepage distance that can adequately withstand high voltages. Therefore, the terminals can be used as power supply terminals.
· Additionally, a flame retardant material (UL9V-0) is used for the insulating material.
· Guide pins are metallic to withstand coupling impact.
· Installation to a panel or rack is achieved via a floating bush. Therefore, insertion and removal do not require the application of excessive force.
In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.- Volume Discount
Configure nowStarting from∗ ： 3.75 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Board-to-Cable Connector MDF51 Series for A High Voltage Resistance (3000 V) Circuit Board with Lock Included
HIROSE ELECTRONIC
This is a board-to-cable connector for a circuit board with high voltage resistance that corresponds to 3,000 V and has a lock included. One-push connection operation is available for improved mating operability.
[Features]
• Connector mating in just one push: Through the utilization of an inertia lock, mating work can be performed easily and with certainty in just one push.
• This also prevents accidents resulting from partial mating.
• Improved workability through vertical mating: Vertical mating and horizontal cable pulling improve workability in the field. drawer allows improved working in the field.
• Also, the mating surface has a large guiding area to make insert operations easier to perform.
• Designed with high voltage in mind: In addition to the terminal pitch, the design accumulates a large side surface distance, retaining performance in a high voltage environment.
• Header connector uplift prevention: Through solder connections to a total of 4 areas, the header side housing is fixed firmly in place, preventing and uplift from occurring.
• Solder implementation for uplift prevention: As a solder implementation method for preventing uplift, a kink structure is included in the terminals (P = 12 mm products only).
• UL, C-UL, and TUV certified products: Those products have obtained safety standard qualifications as connectors (P = 12 mm products only).- Volume Discount
Configure nowStarting from∗ ： 0.30 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
57FE Series Pressure Welded Type Flat Cable
FUJIKURA (DDK)
[Features]
• The 57FE series is a flat cable pressure-welded connector that has fittings covered by a metal shell, which is a countermeasure for electromagnetic radiation that helps reduce noise.
• Basic varieties include 10, 20, 30, and 40 types.- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 13.93 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
CNE / CSE / CCE Common Use Screw Type, Spring Type, Pressure Bonding Type 16A / 500V Insert
ILME
CNE / CSE / CCE, general purpose screw type / spring type / crimped type, 16A / 500V, insert
[Features]
・CNE/CSE/CCE.
・General purpose screw type / spring type / crimped type.
▪ 16A / 500V.
▪ Insert- Volume Discount
Configure nowStarting from∗ ： 13.43 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
MIXO Modular Insert & Contact
ILME
[Features]
· MIXO.
· MIXO modular inserts and contacts.
· Supports large currents up to 200 A, high voltage up to 5, 000 V, high density, air piping, LANs, and USBs.
· Supports optical fiber, coaxial, and Dsub9Pin connectors.- Volume Discount
Configure nowStarting from∗ ： 2.97 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Multiple interlock connector (MIC) <Mark II> series connector housing
TE CONNECTIVITY
Design featuring a reliable lock mechanism, housing that fits together securely and two cantilever springs set on the receptacle contact for incredible vibration and impact resistance.- Volume Discount
Configure nowStarting from∗ ： 1.14 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
![[Ilme Enclosure]T Type IP66 Resin / Insulation Series](//content.misumi-ec.com/image/upload/f_auto,t_product_view_b/v1/p/jp/product/series/222302372957/222302372957_002_20230801115838.jpg)
[Ilme Enclosure]T Type IP66 Resin / Insulation Series
ILME
[Features]
・ The T type insulation enclosure is a resin enclosure compatible with traditional metal enclosures.
・ Complete insulation (equivalent to Class II) unique to resin, weight reduction of up to 75%
It achieved a 20% cost reduction while combining chemical resistance and impact resistance.- Volume Discount
Configure nowStarting from∗ ： 15.89 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
![[Ilme Enclosure]C Type IP66 Rotary Lever Series for CZ Insert](//content.misumi-ec.com/image/upload/f_auto,t_product_view_b/v1/p/jp/product/series/222302372968/222302372968_002_20230801115838.jpg)
[Ilme Enclosure]C Type IP66 Rotary Lever Series for CZ Insert
ILME
New generation lever IL-BRID Series.
[Features]
・ The newly-developed IL-BRID lever is made of stainless steel and has smooth resin.
The manufacturer has adopted the latest design in which these 2 contradictory features are perfectly coordinated.
・ When you operate the lever, the resin part first engages the peg to reduce friction and then slides and is fixed.
・ After that, the stainless steel part is fixed to the peg to ensure a high load capacity.
・ Low friction makes it suitable for frequent insertion and removal applications.- Volume Discount
Configure nowStarting from∗ ： 19.65 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
HDC HA Series
WEIDMUELLER
Insert for industrial plug-in connectors, consisting of contact element and insulating body.- Volume Discount
Configure nowStarting from∗ ： 7.48 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
HKP Series
HONDA TSUSHIN KOGYO
2.54 mm pitch, straight, right angle through hole type connector.
[Features]
· Based on our original design, the contacts have provide highly reliable contact.
· A wide range of connection combinations are possible from single circuit connections to multi-circuit connections.
· Wire connection work is performed using a crimping machine that can perform wire connections for 3, 000 terminals/H and a hand tool for small lots is also available.
· A UL-certified product is used as an insulator.
· Reworking wiring mistakes is also simplified using the removal tool.
▪ Mating with FFC, MFC, HSC, DIC series is supported- Volume Discount
Configure nowStarting from∗ ： 2.61 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
MR Series
HONDA TSUSHIN KOGYO
Small-type/multi-pin connector developed for use with data devices which uses wide-type terminals with exceptional reliability.
[Features]
· Dual screw and a spring lock mechanism that can withstand any shock.
· Dust-proof mechanism with excellent environmental resistance.
· Optimal for device miniaturization via improvement of robustness, compactness, weight and density.
· A relay type case is also provided- Volume Discount
Configure nowStarting from∗ ： 1.92 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
MRP Series Housings
HONDA TSUSHIN KOGYO
Housing for the MRP series.
[Features]
· Dual screw and a spring lock mechanism that can withstand any shock.
· Dust-proof mechanism with excellent environmental resistance.
· Optimal for device miniaturization via improvement of robustness, compactness, weight and density.
· A relay type case is also provided- Volume Discount
Configure nowStarting from∗ ： 2.37 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Board-to-Cable Connector (1.25-mm Pitch, Low Profile) - DF14 Series【1-100 Pieces Per Package】
HIROSE ELECTRONIC
Connector for board-to-cable connection with 1.25-mm pitch. A low-profile type with a lower circuit board mounting height.
[Features]
· Thin type.
· A dedicated right-angle connector to achieve a low-profile on top of circuit boards.
· Circuit board mounting height: 2.5 mm.
· This makes it possible to draw signals from places where there is no space between the circuit boards.
· In addition, the profile of the offset type is lower than the board mounting height of 1.6 mm.
· Supports automatic mounting.
· The header has a vacuum absorption surface. Therefore, automatic mounting by embossed packing is possible.
· Additionally, magazine packing is also available for the on-board type.
· Four-walled type prevents socket from scraping the circuit board.
· Header includes a box structure to prevent twisting to ensure incorrect insertion is completely prevented. Circuit board also includes walls to prevent damage caused by scraping when performing insertion and removal from the socket.
· Additionally, a reinforcement bracket is included to prevent solder from peeling.
In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.- Volume Discount
Configure nowStarting from∗ ： 0.65 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Discrete Wire Connector for Connection, DF3 Series (2 mm Pitch)【1-100 Pieces Per Package】
HIROSE ELECTRONIC
Connector for board-to-cable, cable-to-cable, and board-to-board connections with 2-mm pitch 1 terminal row. Can use for a wide range of equipment.
In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.- Volume Discount
Configure nowStarting from∗ ： 0.09 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Connector for Ribbon Cable, Compatible with 3A, HIF4 Series
HIROSE ELECTRONIC
Current volume is now 3 A rather than the 1 A of conventional ribbon cable connectors (HIF3B, etc.), offering a wider range of use.
[Features]
· Current volume is now 3 A rather than the 1 A of conventional ribbon cable connectors such as HIF3B, offering a wider range of use.
· With an automatic lock mechanism, exceptional reliability in the face of vibrational impact is ensured.
· With an automatic extraction lever with lock release, an extraction tool is not required.
· Compatible lines include the (UL2651) No. 24 AWG flat cable (7 wires/0.203 mm, external cover diameter of 1.0–1.2 mm).- Volume Discount
Configure nowStarting from∗ ： 4.07 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
D-Sub Connector (Solder Connection Type), HD Series
HIROSE ELECTRONIC
A solder connection type D-sub connector. Terminal connection portion has a solder cup for the easy attachment of every cable type.
[Features]
· Small and lightweight connector due to metal shell.
· The solder attachment side has a solder cup construction for easy soldering. It is also optimal for wires up to a maximum size of AWG#20.
· The insulation material is heat/chemical resistant and uses the excellent PBT resin (UL94V-O) containing glass.
· CTF, CTH, and other plug case types can be used. Straight dip (SD type), right angle dip (RD type), and ribbon pressure (FD type) connections can be used.- Volume Discount
Configure nowStarting from∗ ： 3.31 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
D-Sub Connector (Ribbon Cable Pressure Wire Connection Type), FD Series
HIROSE ELECTRONIC
A ribbon/cable pressure connection type D-sub connector. As a 1.27-mm pitch ribbon cable is optimal, it can be used in combination with other connectors.
[Features]
· Has a metal shell and so is small and lightweight.
· Connector mounting can be performed on the chassis, front or back, or one of the sides.
· The structure uses a piece of metal to secure the ribbon cable holding plate and is thus able to provide a strong securing force to secure the cable reliably.
· As the cable pitch at the pressure attachment site is a standard 1.27 mm, a normal ribbon cable can be easily connected.
· The purpose of pressure connections is the ability to make easy connections with the same purpose as other ribbon cable connectors.
· A connection press can also be used.- Volume Discount
Configure nowStarting from∗ ： 12.81 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
D-Sub Connector (Crimped Wire Connection Type) - CD Series【1-100 Pieces Per Package】
HIROSE ELECTRONIC
A crimped wire connection type D-sub connector. The cable can be connected to #20–28 AWG (using two types of terminal pins).
[Features]
· Has a metal shell and so is small and lightweight.
· Connector mounting can be performed on the chassis, front or back, or one of the sides.
· The attaching and detaching of the terminals is done by pressing the retainer sideways. Therefore, no special extraction tool is required.
· The insulator uses a UL material synthetic resin with excellent heat-resistant, chemical-resistant properties.
In-stock items are custom products, therefore returns and cancellations are not possible. Thank you. Returns and cancellations are not possible. Thank you for your understanding.- Volume Discount
Configure nowStarting from∗ ： 0.16 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
![[Enclosure]C Type IP66, Rotary Lever Series](http://content.misumi-ec.com/image/upload/f_auto,t_product_view_b/v1/p/jp/product/series/222302286007/222302286007_003_20230801115838.jpg)
![[Ilme Enclosure]T Type IP66 Resin / Insulation Series](http://content.misumi-ec.com/image/upload/f_auto,t_product_view_b/v1/p/jp/product/series/222302372957/222302372957_002_20230801115838.jpg)
![[Ilme Enclosure]C Type IP66 Rotary Lever Series for CZ Insert](http://content.misumi-ec.com/image/upload/f_auto,t_product_view_b/v1/p/jp/product/series/222302372968/222302372968_002_20230801115838.jpg)
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days |
| Specifications |
| Connector Shape |
| A/B/C |
| D/E/F |
| G/H/I |
| J/K/L |
| M/N/O |
| P/Q/R |
| S/T/U |
| Katakana |
| Number |
| Applicable pin/contact |
| Number Of Cores |
| Application |
| Allowable Current(A) |
| Allowable Voltage(V) |
| Wire connection method |
| Connection direction |
| Protection function (environmentally resistant) |
| Representative Standard |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | HONDA TSUSHIN KOGYO | JAPAN AVIATION ELECTRONICS(JAE) | FUJIKURA (DDK) | HIROSE ELECTRONIC | JAPAN AVIATION ELECTRONICS(JAE) | JAPAN AVIATION ELECTRONICS(JAE) | MISUMI | JAPAN AVIATION ELECTRONICS(JAE) | ILME | FUJIKURA (DDK) | HARTING | UNIVER | ILME | HONDA TSUSHIN KOGYO | HONDA TSUSHIN KOGYO | HIROSE ELECTRONIC | SOURIAU | OMRON | OMRON | TE CONNECTIVITY | MISUMI | HONDA TSUSHIN KOGYO | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | FUJIKURA (DDK) | ILME | ILME | TE CONNECTIVITY | ILME | ILME | WEIDMUELLER | HONDA TSUSHIN KOGYO | HONDA TSUSHIN KOGYO | HONDA TSUSHIN KOGYO | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC |
| Product Series | Half-Pitch I / O Connector (for Fanuc Servo Amps), FI Series | Misumi, Waterproof, E-Model Connector (Screw Wire Connection) | CDA / CDC Common Use Screw Type and Crimp Type 16A / 250V Insert | D-Sub Connector (Ribbon Cable Pressure-Contact Wiring, Low Profile) FD*D Series | MSM Series, Burndy Connector, Cable and Circuit Board Implementation Type | Misumi, Waterproof, DD-Model Connector (Crimp Wire Connection) | Board-to-Cable Connector with 1.25-mm Pitch - DF13 Series【1-10,000 Pieces Per Package】 | 1 mm Pitch, 2-Row, Multi-Pin Circuit Board-to-Cable Connector, DF20 Series【100 Pieces Per Package】 | Discrete Wire Connector for Connection, DF1B Series (2.5 mm Pitch)【1-10,000 Pieces Per Package】 | Rack and Panel Connector QR / P1 Series【1-100 Pieces Per Package】 | CNE / CSE / CCE Common Use Screw Type, Spring Type, Pressure Bonding Type 16A / 500V Insert | Multiple interlock connector (MIC) <Mark II> series connector housing | [Ilme Enclosure]C Type IP66 Rotary Lever Series for CZ Insert | Board-to-Cable Connector (1.25-mm Pitch, Low Profile) - DF14 Series【1-100 Pieces Per Package】 | Discrete Wire Connector for Connection, DF3 Series (2 mm Pitch)【1-100 Pieces Per Package】 | D-Sub Connector (Ribbon Cable Pressure Wire Connection Type), FD Series | D-Sub Connector (Crimped Wire Connection Type) - CD Series【1-100 Pieces Per Package】 | ||||||||||||||||||||||||||||
| CAD |
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||
| Starting from∗ | 4.64 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 2.43 € *Unit price with basic configuration Volume Discount | 5.41 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 5.01 € *Unit price with basic configuration Volume Discount | 2.27 € *Unit price with basic configuration Volume Discount | 1.59 € *Unit price with basic configuration Volume Discount | 12.29 € *Unit price with basic configuration Volume Discount | 6.71 € *Unit price with basic configuration Volume Discount | 20.48 € *Unit price with basic configuration Volume Discount | 4.30 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 5.07 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 1.56 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 6.26 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 4.01 € *Unit price with basic configuration Volume Discount | 3.45 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 7.33 € *Unit price with basic configuration Volume Discount | 14.36 € *Unit price with basic configuration Volume Discount | 4.64 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 6.20 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 11.05 € *Unit price with basic configuration Volume Discount | 14.74 € *Unit price with basic configuration Volume Discount | 8.79 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 0.14 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 13.76 € *Unit price with basic configuration Volume Discount | 0.02 € *Unit price with basic configuration Volume Discount | 11.49 € *Unit price with basic configuration Volume Discount | 2.05 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 3.75 € *Unit price with basic configuration Volume Discount | 0.30 € *Unit price with basic configuration Volume Discount | 13.93 € *Unit price with basic configuration Volume Discount | 13.43 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 2.97 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 1.14 € *Unit price with basic configuration Volume Discount | 15.89 € *Unit price with basic configuration Volume Discount | 19.65 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 7.48 € *Unit price with basic configuration Volume Discount | 2.61 € *Unit price with basic configuration Volume Discount | 1.92 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 2.37 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 0.65 € *Unit price with basic configuration Volume Discount | 0.09 € *Unit price with basic configuration Volume Discount | 4.07 € *Unit price with basic configuration Volume Discount | 3.31 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 12.81 € *Unit price with basic configuration Volume Discount | 0.16 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days | Same day | 5 Days | Same day | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | Same day | Same day | Same day | Same day | 6 Days | Same day | 5 Days | 5 Days | Same day | Same day | 5 Days | 5 Days | Same day | Same day | 5 Days | 5 Days | 5 Days | Same day | 5 Days | 6 Days | 5 Days | Same day | Same day | 5 Days | 5 Days | Same day | 5 Days | 6 Days | Same day | Same day | 6 Days | 5 Days | 5 Days | Same day | 5 Days | 5 Days |
| Specifications |
|
| |||||||||||||||||||||||||||||||||||||||||||
| Connector Shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape |
| A/B/C | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Other | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Other |
| D/E/F | - | - | - | Other | - | - | - | - | - | - | - | - | - | - | - | Dsub | - | - | - | - | - | - | Other | Other | Other | Dsub | Other | - | - | - | - | - | - | - | - | - | - | - | - | Other | Other | - | Dsub | Dsub | Dsub |
| G/H/I | - | - | - | - | - | - | Heavy duty | - | - | - | Heavy duty | - | - | - | - | - | - | - | - | - | Heavy duty | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Other | Other | - | - | - | - | Other | Other | - | - |
| J/K/L | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| M/N/O | - | - | - | - | - | - | - | - | - | - | - | - | - | - | MR | - | - | - | - | - | - | - | - | - | - | - | - | - | Other | - | - | - | - | - | - | - | - | MR | MR | - | - | - | - | - | - |
| P/Q/R | Other | - | - | - | - | - | - | - | - | - | - | - | - | Other | - | - | - | - | - | - | - | Other | - | - | - | - | - | Other | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| S/T/U | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Katakana | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Number | - | - | Other | - | - | - | - | - | - | Other | - | - | - | - | - | - | - | - | - | Other | - | - | - | - | - | - | - | - | - | Other | - | - | Other | - | - | - | - | - | - | - | - | - | - | - | - |
| Applicable pin/contact | Male (plug) / Female (socket) | Male (plug) | Male (plug) / Female (socket) | Female (socket) | Male (plug) / Female (socket) | Male (plug) / Female (socket) | Male (plug) / Female (socket) | Male (plug) / Female (socket) | Male (plug) / Female (socket) | Male (plug) / Female (socket) | - | Female (socket) | - | - | - | Male (plug) / Female (socket) | - | Male (plug) / Female (socket) | Male (plug) / Female (socket) | Female (socket) | Male (plug) / Female (socket) | - | Male (plug) / Female (socket) | Female (socket) | Male (plug) / Female (socket) | - | Male (plug) / Female (socket) | Male (plug) / Female (socket) | Male (plug) | Female (socket) | Male (plug) / Female (socket) | Male (plug) / Female (socket) | Male (plug) / Female (socket) | - | - | Male (plug) / Female (socket) | Male (plug) / Female (socket) | Male (plug) / Female (socket) | Male (plug) / Female (socket) | Male (plug) / Female (socket) | Male (plug) / Female (socket) | Male (plug) / Female (socket) | Male (plug) / Female (socket) | Male (plug) / Female (socket) | Male (plug) / Female (socket) |
| Number Of Cores | 20 ～ 96 | 5 ～ 30 | 14 ～ 50 | 15 ～ 20 | 2 ～ 4 | 3 ～ 50 | 6 ～ 48 | 12 ～ 40 | 10 ～ 32 | 9 ～ 37 | - | 1 | - | 20 ～ 50 | 8 ～ 50 | 9 ～ 37 | 14 ～ 75 | 9 ～ 37 | 15 | - | 24 ～ 72 | 20 ～ 96 | 2 ～ 40 | 10 ～ 50 | 2 ～ 40 | 9 ～ 37 | 20 ～ 120 | 12 ～ 32 | 2 | 14 ～ 50 | 6 ～ 48 | 1 ～ 25 | 9 (2 columns x 4 + center: 1) ～ 21 (2 columns x 10 + center: 1) | - | - | 3 ～ 16 | 5 ～ 20 | 8 ～ 50 | 8 ～ 50 | 4 ～ 10 | 2 ～ 15 | 16 ～ 40 | 9 ～ 50 | 9 ～ 37 | 9 ～ 37 |
| Application | Cable Connection / For PCB / Panel Mount | For PCB | Cable Connection / Panel Mount | Cable Connection | Cable Connection | Cable Connection / For PCB | Cable Connection | Cable Connection / For PCB | Cable Connection | Cable Connection / Panel Mount | - | Cable Connection | - | Other | Other | Cable Connection | - | Cable Connection / For PCB | For PCB | Cable Connection | Cable Connection | Other | Cable Connection / For PCB | Cable Connection | Cable Connection / For PCB / Panel Mount | - | Cable Connection / For PCB / Board-to-Board | Panel Mount / Other | For PCB | Cable Connection | Cable Connection | Cable Connection | Cable Connection / Panel Mount | Cable Connection | Cable Connection | - | For PCB | For PCB / Panel Mount | Panel Mount | Cable Connection / For PCB | Cable Connection / For PCB / Panel Mount | Cable Connection / For PCB | Cable Connection | Cable Connection | Cable Connection |
| Allowable Current(A) | 1 | - | 5 | 1 | - | - | 16 | - | 16 | 5 | - | AC/DC | - | - | - | 1 | - | 5 | 3 | - | 10 | - | 1 | 1 | 0.5 ～ 3 | - | 0.5 | 3 ～ 13 | 1 | 1 | 16 | 4 ～ 200 | - | - | - | 10 ～ 16 | 3 | 3 | 3 | 1 | 3 | 3 | 3 | 1 | 3 |
| Allowable Voltage(V) | AC250 | - | AC500 | AC250 | - | - | 500 ～ 600 | - | 250 | AC300 | - | 12 VDC - 230 VAC | - | - | - | AC200 | - | AC300 | AC300 | - | 250 ～ 600 | - | AC150 | AC100 | AC250 | - | AC125 | AC125 ～ AC250 | AC/DC3000 | AC250 | 500 | 50 ～ 1000 | - | - | - | 250 | AC300 | AC300 | AC300 | AC150 | AC250 | AC300 | AC400 | AC200 | AC350 |
| Wire connection method | Solder / Pressure Welding | - | Solder | Solder / Pressure Welding | - | Solder / Crimp / Pressure Welding | Fasten With Screws | Crimp | Crimp / Fasten With Screws | Solder | - | Fasten With Screws | - | - | - | Pressure Welding | - | - | - | - | Crimp | - | Crimp / Other | Crimp | Crimp / Pressure Welding / Other | - | Pressure Welding / Other | Crimp | Other | Pressure Welding | Crimp / Fasten With Screws / Other | Crimp / Fasten With Screws / Other | - | - | - | Fasten With Screws | - | Solder | Crimp | Crimp / Other | Crimp / Other | Pressure Welding | Solder | Pressure Welding | Crimp |
| Connection direction | Straight / Angle | Straight / Angle | Straight | Straight | Straight | Straight / Angle | Straight | Straight / Angle | Straight | Straight | - | Straight | - | Straight | Straight | Straight | Straight | Straight / Angle | Straight | Straight | Straight | Straight | Straight / Angle | Straight | Straight / Angle | Straight | Straight / Angle | Straight | Straight | Angle | Straight | Straight | Straight | Straight | - | Straight | Straight | Straight / Angle | Straight | Straight / Angle | Straight / Angle | Straight / Angle | Straight | Straight | Straight |
| Protection function (environmentally resistant) | N/A | N/A | N/A | - | Available | N/A | Available | Available | - | N/A | Available | N/A | Available | N/A | N/A | - | - | - | - | - | Available | N/A | - | - | - | - | - | - | - | N/A | - | - | - | Available | Available | N/A | N/A | N/A | N/A | - | - | - | - | - | - |
| Representative Standard | - | - | - | - | - | - | CE / UL | - | UL / CCC / CSA | - | - | - | UL / CUL | - | - | - | - | - | - | - | CE / UL | - | - | - | UL / CSA | - | - | UL / TUV / CSA | UL / CUL / TUV | - | UL / CCC / CSA | UL / CUL / CCC / CSA | - | UL / CUL | UL / CUL | UL / CSA | - | - | - | - | UL / CSA | - | - | - | - |
![[Enclosure]C Type IP66, Rotary Lever Series](http://content.misumi-ec.com/image/upload/f_auto,t_product_view_c/v1/p/jp/product/series/222302286007/222302286007_003_20230801115838.jpg)
![[Ilme Enclosure]T Type IP66 Resin / Insulation Series](http://content.misumi-ec.com/image/upload/f_auto,t_product_view_c/v1/p/jp/product/series/222302372957/222302372957_002_20230801115838.jpg)
![[Ilme Enclosure]C Type IP66 Rotary Lever Series for CZ Insert](http://content.misumi-ec.com/image/upload/f_auto,t_product_view_c/v1/p/jp/product/series/222302372968/222302372968_002_20230801115838.jpg)
Loading...
Filter by:
Stock
-
- Show only stock items
-
Connector Shape
- Round
- Square shape
- Other
-
A/B/C
- Other
-
D/E/F
- Dsub
- FCN
- Other
-
G/H/I
- Heavy duty
- Other
-
J/K/L
- Other
-
M/N/O
- MR
- MIL
- Other
-
P/Q/R
- Other
-
S/T/U
- Other
-
Katakana
- Dynamic
-
Number
- Other
-
Applicable pin/contact
- Male (plug)
- Female (socket)
- Combination use male/female
- Other
-
Number Of Cores
- 1
- 2
- 2 (1 column x 2)
- 3
- 3 (1 column x 3)
- 4
- 4 (2 column x 2)
- 5
- 5 (2 columns x 2 + center: 1)
- 6
- 6 (1 column x 6)
- 6 (2 columns x 3)
- 7
- 7 (2 columns x 3 + center: 1)
- 8
- 8 (2 columns x 3 + center: 2)
- 8 (2 columns x 4)
- 9
- 9 (2 columns x 4 + center: 1)
- 9 (3 columns x 3)
- 10
- 11
- 12
- 12 (2 columns x 5 + center: 2)
- 12 (2 columns x 6)
- 12 (3 columns x 4)
- 13
- 13 (2 columns x 6 + center: 1)
- 14
- 15
- 16
- 17
- 17 (2 columns x 8 + center: 1)
- 18
- 18 (3 columns x 6)
- 20
- 21
- 21 (2 columns x 10 + center: 1)
- 22
- 24
- 25
- 26
- 27
- 28
- 30
- 31
- 32
- 34
- 35
- 36
- 37
- 38
- 40
- 41
- 42
- 45
- 46
- 48
- 50
- 51
- 52
- 56
- 60
- 64
- 68
- 70
- 72
- 75
- 80
- 92
- 96
- 98
- 100
- 104
- 108
- 110
- 120
- 135
-
Application
-
Allowable Current(A)
-
Allowable Voltage(V)
- 5
- DC 12
- 12 VDC - 230 VAC
- 17.5
- 24
- 25
- 30
- AC30
- 50
- AC50
- 72
- 100
- AC100
- AC120
- 125
- AC125
- 150
- AC150
- AC150/DC200
- 160
- AC200
- 230/400
- 250
- AC250
- 300
- AC300
- 320
- AC350
- DC350
- 400
- AC400
- 400/400 V (Leistungs-/Steuerungsbereich)
- 400/690
- 400/690 V (Leiter-Erde/Leiter/Leiter)
- 400/690 V(Leiter-Erde/Leiter-Leiter)
- 500
- AC500
- AC/DC500
- 550
- 600
- AC600
- 630
- 690
- 690/160 V (Leistungs-/Steuerungsbereich)
- 830
- 830/400 V (Leistungs-/Steuerungsbereich)
- 1000
- 1550
- AC/DC3000
- 3100
-
Wire connection method
- Solder
- Crimp
- Pressure Welding
- Fasten With Screws
- Other
-
Connection direction
- Straight
- Angle
- Other
-
Protection function (environmentally resistant)
-
Representative Standard
Brand
-
- HIROSE ELECTRONIC (47)
- ILME (21)
- WEIDMUELLER (20)
- TE CONNECTIVITY (17)
- JAPAN AVIATION ELECTRONICS(JAE) (15)
- MOLEX (14)
- WAGO (12)
- FUJIKURA (DDK) (8)
- HONDA TSUSHIN KOGYO (8)
- OMRON (5)
- HARTING (4)
- UNIVER (1)
- FUJITSU COMPONENT (1)
- PROVERTHA (1)
- 3M (1)
- SOURIAU (1)
- KEL (0)
- FINDER (0)
- FISCHER ELEKTRONIK (0)
- IFM ELECTRONIC (0)
- NEUTRIK (0)
- LUMBERG (0)
- HELLERMANN TYTON (0)
- AMPHENOL ICC (0)
- CONNFLY (0)
- PTR (0)
- DECA (0)
- BINDER (0)
- PHOENIX CONTACT (0)
- LAPP (0)
- EDAC (0)
- CONEC (0)
- TRU COMPONENTS (0)
- ECON CONNECT (0)
- HIRSCHMANN (0)
- ASSMANN WSW (0)
- VOGT VERBINDUNGSTECHNIK (0)
- MH CONNECTORS (0)
- BKL ELECTRONIC (0)
CAD data type
-
- 2D
- 3D
Categories related to Square Connectors
Fizetési mód
Átutalás
Előre fizetés
Igény szerinti gyártás
Tanúsítványok
Copyright © MISUMI Corporation Minden jog fenntartva.