- Function
- I/O power connection unit, 4xV + 8xG
- I/O power feed and distribution unit, separates power supply between groups of I/O units, 4xV + 8xG
- I/O power feed unit with electronic overload protection, separates power supply between groups of I/O units
- Turnback Unit, left-hand side
- Turnback Unit, right-hand side
- Voltage type (supply voltage)
- Supply voltage DC(V)
- Type of electric connection
- Height(mm)
- 84
- Width(mm)
- 15
- Depth(mm)
- 74.4
- Performance level according to EN ISO 13849-1
- Number of HW-interfaces RS-485
- 1
- Number of HW-interfaces other
- 1
- Number of HW-interfaces wireless
- 0
- Number of HW-interfaces industrial Ethernet
- 0
- Number of HW-interfaces parallel
- 0
- Number of HW-interfaces serial TTY
- 0
- Number of interfaces PROFINET
- 0
- Number of HW-interfaces RS-232
- 0
- Number of HW-interfaces RS-422
- 0
- Degree of protection (IP)
- Fieldbus connection over separate bus coupler possible
- System accessory
- Bus diagnosis possible
- Suitable for rail mounting
- With power supply module
- SIL according to IEC 61508
- Explosion safety category for dust
- Explosion safety category for gas
- Supporting protocol for other bus systems
- Supporting protocol for PROFIBUS
- Supporting protocol for INTERBUS-Safety
- Supporting protocol for KNX
- With potential separation
- Radio standard GSM
- Supporting protocol for PROFINET CBA
- Wall mounting/direct mounting
- Supporting protocol for SafetyBUS p
- Supporting protocol for SUCONET
- Supporting protocol for INTERBUS
- Radio standard UMTS
- Radio standard Bluetooth
- Supporting protocol for Data-Highway
- Supporting protocol for DeviceNet
- Supporting protocol for CAN
- With optical interface
- Supporting protocol for PROFIsafe
- Radio standard GPRS
- Supporting protocol for Foundation Fieldbus
- Front built-in possible
- Supporting protocol for PROFINET IO
- Suitable for safety functions
- Supporting protocol for AS-Interface Safety at Work
- Supporting protocol for TCP/IP
- Supporting protocol for Modbus
- Remote module
- Appendant operation agent (Ex ib)
- Supporting protocol for SERCOS
- Supporting protocol for LON
- Appendant operation agent (Ex ia)
- Supporting protocol for DeviceNet Safety
- Supporting protocol for EtherNet/IP
- Suitable as segment module
- Radio standard WLAN 802.11
- Supporting protocol for ASI
- Rack-assembly possible
- Becsült szállítási napok
- Minden
- 3 munkanapok belül
SmartSlice I/O System, Other Units
Cikkszám:
javaslat található.Cikkszámlista
Egységár (HÉA nélkül)(egységár adóval) | Normál feladási dátum |
|---|
89.33 € ( 106.30 € ) | 3 munkanapok |
113.67 € ( 135.27 € ) | 3 munkanapok |
89.33 € ( 106.30 € ) | 3 munkanapok |
132.69 € ( 157.90 € ) | 3 munkanapok |
71.26 € ( 84.80 € ) | 3 munkanapok |
Részletes információk
Alapvető információk
The smartest modular I/O system
OMRON's SmartSlice I/O system is compact, intelligent and easy. When used with OMRON's CS1/CJ1 DeviceNet or CompoNet master units, no configuration tool is required. By using built-in functions such as pre-scaling, totalising, differentiation and alarming in analog I/O units, PLC programming can be minimised. Preventive maintenance data collected by all I/O units can be accessed using CX-Integrator or NS-series Smart Active Parts.
• Most compact in the market (84 mm high)
• Easy set-up, backup and restore functions
• Diagnostics and preventive maintenance data at I/O level
• Detachable terminal blocks allow hot-swapping without re-wiring
• 3-wire I/O connection with 'push-in' technology, no screwdriver required