Megerősítve

Pump for Drum (EPH MR220)

Pump for Drum EPH MR220

Cikkszám:

EPH MR220
Törlés
Mennyiség:
Loading...

Cikkszámlista

Elemek száma
Cikkszám
EPH MR220

BSPP Male Thread

Description

Flow rate

Outlet Pressure

Pressure Ratio

Tube Length

(mm)

Minimális rendelési mennyiség
Oil outlet : G 1/2
Oil pump
20 l/min (for air pressure 6 bar)
28 bar (air pressure at 7 bar)
4:1
-
1 darab
Egységár (HÉA nélkül)(egységár adóval)
Normál feladási dátum
398.60 €
( 474.33 € )
7 munkanapok

Részletes információk

Alapvető információk

A wide range of pumps and accessories are available for fixed workstations or mobile push carts. A dual action pump system allows a consistent fluid supply. The piston engine is compact and sturdy.
All pumps are supplied with a nut for attaching the drum. Each component is specially treated and assembled with precision.
Grease pumps
Prevost grease pumps are used to distribute grease at high pressure. The compression ratio is 58:1 (i.e. 58 times higher than the compressed air inlet pressure). These pumps feature a screen filter, located at the end of the intake rods, to protect the pump body.
Grease pumps are available individually or in kits with: drum covers, membranes, spray guns, sealing coupling, rubber hoses, air preparation units and mobile carts. The kit should be selected to match the diameter and height of the drum to be used.
Oil pumps
Prevost oil pumps are used to distribute low viscosity fluids, such as engine oils, at medium pressure. The compression ratio is 4:1 (i.e. 4 times higher than the compressed air inlet pressure).
Oil pumps are available individually or in kits with distribution guns, rubber hoses, air preparation units and mobile carts.

A cikkszám megerősítésre került