Tapered Clamping Bush 3030 with Inch Drill (Part Numbers)
[Specifications]
・Type: 3030
・Body Material: Cast Iron
・Bore diameter(mm): 76.2
・Standard: British Standard BS 46 Part 1
Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.
・Type: 3030
・Body Material: Cast Iron
・Bore diameter(mm): 76.2
・Standard: British Standard BS 46 Part 1
Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
TB3030762
- Product data
- CAD data not available
Basic information
| Body Material | Cast Iron | Bore diameter(mm) | 76.2 | Standard | British Standard BS 46 Part 1 |
|---|---|---|---|---|---|
| Type | 3030 | Weight(kg) | 3.75 | Description | 3030 / 3'' (76,2 mm) |
This page is Tapered Clamping Bush 3030 with Inch Drill, part number TB3030762.
You can find the detail information about specifications and dimensions on part number TB3030762.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Fizetési mód
Átutalás
Előre fizetés
Igény szerinti gyártás
Tanúsítványok
Copyright © MISUMI Corporation Minden jog fenntartva.